LDN services
LDN handles all local network communication.
ldn:m
This is "nn::ldn::detail::IMonitorServiceCreator".
Cmd | Name |
---|---|
0 | #CreateMonitorService |
CreateMonitorService
Returns an #IMonitorService.
The user-process closes the IMonitorServiceCreator object immediately after using this cmd.
IMonitorService
This is "nn::ldn::detail::IMonitorService".
GetStateForMonitor
No input, returns an output u32.
sdknso implements this by return
ing the u32, with 0 being returned on error.
GetNetworkInfoForMonitor
Takes a type-0x1A output buffer containing a #NetworkInfo.
GetIpv4AddressForMonitor
No input, returns an output #Ipv4Address and a #SubnetMask.
GetDisconnectReasonForMonitor
No input, returns an output s16.
This is not exposed by sdknso.
This just returns 0.
GetSecurityParameterForMonitor
No input, returns an output #SecurityParameter.
This is not exposed by sdknso.
GetNetworkConfigForMonitor
No input, returns an output #NetworkConfig.
This is not exposed by sdknso.
InitializeMonitor
No input/output.
This is used immediately after object creation. Official sw will Abort if this fails.
This just returns 0.
FinalizeMonitor
No input/output.
This is used during service exit, prior to closing the object. Official sw will Abort if this fails.
This just returns 0.
ldn:s
This is "nn::ldn::detail::ISystemServiceCreator".
Cmd | Name |
---|---|
0 | #CreateSystemLocalCommunicationService |
CreateSystemLocalCommunicationService
Returns an #ISystemLocalCommunicationService.
The user-process closes the ISystemServiceCreator object immediately after using this cmd. Official sw ignores errors from this cmd.
ISystemLocalCommunicationService
This is "nn::ldn::detail::ISystemLocalCommunicationService".
Cmd | Name |
---|---|
0 | #GetState |
1 | #GetNetworkInfo |
2 | #GetIpv4Address |
3 | #GetDisconnectReason |
4 | #GetSecurityParameter |
5 | #GetNetworkConfig |
100 | #AttachStateChangeEvent |
101 | #GetNetworkInfoLatestUpdate |
102 | #Scan |
103 | #ScanPrivate |
104 | [5.0.0+] #SetWirelessControllerRestriction |
200 | #OpenAccessPoint |
201 | #CloseAccessPoint |
202 | #CreateNetwork |
203 | #CreateNetworkPrivate |
204 | #DestroyNetwork |
205 | #Reject |
206 | #SetAdvertiseData |
207 | #SetStationAcceptPolicy |
208 | #AddAcceptFilterEntry |
209 | #ClearAcceptFilter |
300 | #OpenStation |
301 | #CloseStation |
302 | #Connect |
303 | #ConnectPrivate |
304 | #Disconnect |
400 | #InitializeSystem |
401 | #FinalizeSystem |
402 | [4.0.0+] #SetOperationMode |
403 | [7.0.0+] #InitializeSystem2 |
GetState
No input, returns an output u32.
sdknso implements this by return
ing the u32, with 0 being returned on error / when service isn't initialized.
GetNetworkInfo
Takes a type-0x1A output buffer containing a #NetworkInfo.
GetIpv4Address
No input, returns an output #Ipv4Address and a #SubnetMask.
GetDisconnectReason
No input, returns an output s16.
sdknso implements this by return
ing the s16 as a s32, with -1 being returned on error.
GetSecurityParameter
No input, returns an output #SecurityParameter.
GetNetworkConfig
No input, returns an output #NetworkConfig.
AttachStateChangeEvent
No input, returns an output Event handle.
sdknso uses EventClearMode=1 with this. sdknso will Abort if this cmd fails.
GetNetworkInfoLatestUpdate
Takes a type-0x1A output buffer containing a #NetworkInfo and a type-0xA output buffer containing an array of #NodeLatestUpdate.
Scan
Takes a type-0x22 output buffer containing an array of #NetworkInfo, a s16, a #ScanFilter, returns an output s16.
sdknso copies the output s16 to a s32, the value passed for the input s16 is from an user-specified s32.
ScanPrivate
Takes a type-0x22 output buffer containing an array of #NetworkInfo, a s16, a #ScanFilter, returns an output s16.
sdknso copies the output s16 to a s32, the value passed for the input s16 is from an user-specified s32.
SetWirelessControllerRestriction
Takes an input #WirelessControllerRestriction, no output.
OpenAccessPoint
No input/output.
CloseAccessPoint
No input/output.
CreateNetwork
Takes an input #SecurityConfig, an #UserConfig, a #NetworkConfig, no output.
CreateNetworkPrivate
Takes an input #SecurityConfig, a #SecurityParameter, an #UserConfig, a #NetworkConfig, a type-0x9 input buffer containing an array of #AddressEntry, no output.
DestroyNetwork
No input/output.
Reject
Takes an input #Ipv4Address, no output.
SetAdvertiseData
Takes a type-0x21 input buffer, no output.
The input buffer contains arbitrary user data.
SetStationAcceptPolicy
Takes an input #AcceptPolicy, no output.
AddAcceptFilterEntry
Takes an input #MacAddress, no output.
There are two sdknso funcs implementing this: one which takes a #MacAddress directly, the other loads the #MacAddress from the input #NodeInfo.
ClearAcceptFilter
No input/output.
OpenStation
No input/output.
CloseStation
No input/output.
Connect
Takes a type-0x19 input buffer containing a #NetworkInfo, a #SecurityConfig, an #UserConfig, a s32, a #ConnectOption, no output.
ConnectPrivate
Takes a #SecurityConfig, #SecurityParameter, an #UserConfig, a s32, a #ConnectOption, a #NetworkConfig, no output.
Disconnect
No input/output.
InitializeSystem
Takes an input PID and an u64 pid_placeholder.
This is used immediately after object creation.
With [7.0.0+] #InitializeSystem2 is used instead.
FinalizeSystem
No input/output.
This is used during service exit, prior to closing the object. Official sw will Abort if this fails.
SetOperationMode
Takes an input #OperationMode, no output.
InitializeSystem2
Takes an input PID, an u32, and an u64 pid_placeholder.
Official sw uses hard-coded value 0x1 for the u32.
ldn:u
This is "nn::ldn::detail::IUserServiceCreator".
Cmd | Name |
---|---|
0 | #CreateUserLocalCommunicationService |
CreateUserLocalCommunicationService
Returns an #IUserLocalCommunicationService.
The user-process closes the IUserServiceCreator object immediately after using this cmd. Official sw ignores errors from this cmd.
IUserLocalCommunicationService
This is "nn::ldn::detail::IUserLocalCommunicationService".
Cmd | Name |
---|---|
0 | #GetState |
1 | #GetNetworkInfo |
2 | #GetIpv4Address |
3 | #GetDisconnectReason |
4 | #GetSecurityParameter |
5 | #GetNetworkConfig |
100 | #AttachStateChangeEvent |
101 | #GetNetworkInfoLatestUpdate |
102 | #Scan |
103 | #ScanPrivate |
104 | [5.0.0+] #SetWirelessControllerRestriction |
200 | #OpenAccessPoint |
201 | #CloseAccessPoint |
202 | #CreateNetwork |
203 | #CreateNetworkPrivate |
204 | #DestroyNetwork |
205 | #Reject |
206 | #SetAdvertiseData |
207 | #SetStationAcceptPolicy |
208 | #AddAcceptFilterEntry |
209 | #ClearAcceptFilter |
300 | #OpenStation |
301 | #CloseStation |
302 | #Connect |
303 | #ConnectPrivate |
304 | #Disconnect |
400 | #Initialize |
401 | #Finalize |
402 | [7.0.0+] #Initialize2 |
Initialize
Takes an input PID and an u64 pid_placeholder.
This is used immediately after object creation.
With [7.0.0+] #Initialize2 is used instead.
Finalize
No input/output.
This is used during service exit, prior to closing the object. Official sw will Abort if this fails.
Initialize2
Takes an input PID, an u32, and an u64 pid_placeholder.
Official sw uses hard-coded value 0x1 for the u32.
ndd
This is "nn::ndd::IService".
This was added with [5.0.0] and removed with [6.0.0].
Cmd | Name |
---|---|
0 | EnableAutoCommunication |
1 | DisableAutoCommunication |
2 | IsAutoCommunicationEnabled |
3 | EnablePowerSave |
4 | DisablePowerSave |
5 | IsPowerSaveEnabled |
6 | IsNetworkActive |
7 | AcquireSendDataUpdateEvent |
8 | AddSendData |
9 | ClearSendData |
10 | GetSendData |
11 | AcquireReceiveDataEvent |
12 | GetCurrentReceiveDataCounter |
13 | GetOldestReceiveDataCounter |
14 | GetNextReceiveDataCounter |
15 | GetAvailableReceiveDataCount |
16 | GetRecentReceiveDataCounter |
17 | GetReceiveData |
18 | AddReceiveData |
19 | ClearReceiveData |
20 | ClearDataIdFilter |
21 | AcquireDeviceScanEvent |
22 | StartDeviceScan |
23 | CancelDeviceScan |
24 | GetDeviceScanResult |
lp2p:app, lp2p:sys
These are "nn::lp2p::detail::INetworkServiceCreator".
These were added with [9.0.0+].
Cmd | Name |
---|---|
0 | CreateNetworkService |
8 | CreateNetworkServiceMonitor |
INetworkService
This is "nn::lp2p::detail::INetworkService".
Cmd | Name |
---|---|
0 | Initialize |
[9.0.0-9.0.1] 256 | AttachNetworkInterfaceStateChangeEvent |
[9.0.0-9.0.1] 264 | GetNetworkInterfaceLastError |
[9.0.0-9.0.1] 272 | GetRole |
[9.0.0-9.0.1] 280 | |
[9.0.0-9.0.1] 288 | GetGroupInfo |
[9.0.0-9.0.1] 296 | |
[9.0.0-9.0.1] 304 | |
[9.0.0-9.0.1] 312 | |
[9.0.0-9.0.1] 320 | |
512 | |
768 | |
776 | |
784 | |
1536 | SendToOtherGroup |
1544 | RecvFromOtherGroup |
1552 | AddAcceptableGroupId |
1560 | [9.1.0+] |
Initialize
Returns 0.
INetworkServiceMonitor
This is "nn::lp2p::detail::INetworkServiceMonitor".
This interface has no commands, until [9.1.0+] which added actual commands.
Cmd | Name |
---|---|
0 | Initialize |
256 | AttachNetworkInterfaceStateChangeEvent |
264 | GetNetworkInterfaceLastError |
272 | GetRole |
280 | |
281 | |
288 | GetGroupInfo |
296 | |
304 | |
312 | |
320 | |
328 | AttachJoinEvent |
336 |
Initialize
Returns 0.
lp2p:m
This is "nn::lp2p::detail::IMonitorServiceCreator".
This was added with [9.1.0+].
Cmd | Name |
---|---|
0 | #CreateMonitorService |
CreateMonitorService
Takes a PID, a total of 0x10-bytes of input, and returns an #IMonitorService.
IMonitorService
This is "nn::lp2p::detail::IMonitorService".
Cmd | Name |
---|---|
0 | Initialize |
288 | GetGroupInfo |
320 |
Initialize
Returns 0.
Ipv4Address
This is "nn::ldn::Ipv4Address". This is a 0x4-byte struct with 4-byte alignment.
This is essentially the same as struct in_addr
.
SubnetMask
This is "nn::ldn::SubnetMask". This is a 0x4-byte struct with 4-byte alignment.
This is essentially the same as struct in_addr
.
Ssid
This is "nn::ldn::Ssid".
When converting a Ssid to a string, the loaded chars from the string must be in the range of 0x20-0x7F, otherwise the byte written to the string will be 0.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | Length excluding NUL-terminator, must be 0x1-0x20. |
0x1 | 0x21 | SSID string including NUL-terminator, str[{above length}] must be 0. |
NetworkInfo
This is "nn::ldn::NetworkInfo". This is a 0x480-byte struct.
ScanFilter
This is "nn::ldn::ScanFilter". This is a 0x60-byte struct with 8-byte alignment.
sdknso copies the input ScanFilter to a tmp struct on stack, which is then used with the cmd.
Offset | Size | Description |
---|---|---|
0x0 | 0x20 | |
0x20 | 0x4 | |
0x24 | 0x6 | #MacAddress (Only copied with #ScanPrivate) |
0x2A | 0x22 | #Ssid |
0x5C | 0x4 | Masked with 0x37 for #Scan, with #ScanPrivate this is masked with 0x3F. |
SecurityParameter
This is "nn::ldn::SecurityParameter". This is a 0x20-byte struct with 1-byte alignment.
NetworkConfig
This is "nn::ldn::NetworkConfig". This is a 0x20-byte struct with 8-byte alignment.
sdknso copies the input NetworkConfig to a tmp struct on stack, which is then used with the cmd (#CreateNetwork, #CreateNetworkPrivate, #ConnectPrivate).
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | |
0x8 | 0x2 | Cleared to zero during the copy. |
0xA | 0x2 | |
0xC | 0x4 | Cleared to zero during the copy. |
0x10 | 0x2 | |
0x12 | 0x1 | |
0x13 | 0x1 | Cleared to zero during the copy. |
0x14 | 0x2 | |
0x16 | 0xA | Cleared to zero during the copy. |
NodeLatestUpdate
This is "nn::ldn::NodeLatestUpdate". This is a 0x8-byte struct.
WirelessControllerRestriction
This is "nn::ldn::WirelessControllerRestriction". This is an u32 enum.
Value | Description |
---|---|
0 | |
1 |
SecurityConfig
This is "nn::ldn::SecurityConfig". This is a 0x44-byte struct with 2-byte alignment.
SecurityParameter
This is "nn::ldn::SecurityParameter". This is a 0x20-byte struct with 1-byte alignment.
UserConfig
This is "nn::ldn::UserConfig". This is a 0x30-byte struct with 1-byte alignment.
sdknso copies the input UserConfig to a tmp struct on stack, which is then used with the cmd.
Offset | Size | Description |
---|---|---|
0x0 | 0x20 | NUL-terminated string. |
0x20 | 0x10 | Cleared to zero during the copy. |
AddressEntry
This is "nn::ldn::AddressEntry". This is a 0x24-byte struct.
AcceptPolicy
This is "nn::ldn::AcceptPolicy". This is an u8.
Value | Description |
---|---|
0 | |
1 | |
2 | |
3 |
MacAddress
This is "nn::ldn::MacAddress". This is a 6-byte struct with 1-byte alignment.
NodeInfo
This is "nn::ldn::NodeInfo".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | |
0x4 | 0x6 | #MacAddress |
ConnectOption
This is "nn::ldn::ConnectOption". This is an u32 bitmask.
There's two versions of the sdknso funcs for #Connect/#ConnectPrivate: the version where the ConnectOption isn't user-specified uses a default value of 0x1 for it, with the same ShowError code without the bit0 check.
When bit0 here is set after using the above cmds, the sdknso funcs will use ShowError with the returned Result if: (rc & 0x3FE1FF) == 0xE0CB.
OperationMode
This is "nn::ldn::OperationMode". This is an u32 enum.
Value | Description |
---|---|
0 | |
1 |