SVC
System calls
Id | Name | In | Out |
---|---|---|---|
0x1 | svcSetupHeap | X1=size | W0=result, X1=outaddr |
0x2 | #svcProtectMemory | X0=addr, X1=size, W2=prot | W0=result |
0x3 | #svcSetMemoryState | X0=addr, X1=size, W2=state0, W3=state1 | W0=result |
0x4 | #svcMirrorStack | X0=dstaddr, X1=srcaddr, X2=size | W0=result |
0x5 | svcUnmirrorStack | X0=dstaddr, X1=srcaddr, X2=size | W0=result |
0x6 | svcQueryMemory | X0=meminfo_ptr, X2=addr | W0=result, W1=pageinfo |
0x7 | svcExitProcess | None | |
0x8 | svcCreateThread | ||
0x9 | svcStartThread | W0=thread_handle | |
0xA | svcExitThread | None | |
0xB | #svcSleepThread | X0=nano | |
0xC | svcGetThreadPriority | W1=thread_handle | W0=result, W1=prio |
0xD | svcSetThreadPriority | W0=thread_handle, W1=prio | W0=result |
0xE | svcGetThreadAffinityMask | W2=thread_handle | W0=result, W1=out, X2=out |
0xF | svcSetThreadAffinityMask | W0=thread_handle, W1=in, X2=in2 | W0=result |
0x10 | svcGetCurrentProcessorNumber | None | W0/X0=cpuid |
0x11 | svcGetMemoryBlockSomethingA? | W0=handle | ? |
0x12 | svcGetMemoryBlockSomethingB? | W0=handle | ? |
0x13 | svcMapMemoryBlock | W0=memblk_handle, X1=addr, X2=size, W3=perm | W0=result |
0x14 | svcUnmapMemoryBlock | W0=memblk_handle, X1=addr, X2=size | W0=result |
0x15 | #svcCreateMemoryMirror | X1=addr, X2=size, W3=perm | W0=result, W1=handle |
0x16 | svcCloseHandle | W0=handle | W0=result |
0x17 | svcClearEvent | W0=handle | W0=result |
0x18 | #svcWaitEvents | X1=handles_ptr, X2=num_handles. X3=timeout | W0=result, W1=handle_idx |
0x19 | svcSignalEvent | W0=handle | W0=result |
0x1A | svcLockMutex | W0=cur_thread_handle, X1=ptr, W2=req_thread_handle | |
0x1B | svcUnlockMutex | X0=ptr | |
0x1C | svcCondWait | X0=ptr0, X1=ptr, W2=thread_handle, X3=timeout | W0=result |
0x1D | svcCondBroadcast | X0=ptr, W1=value | W0=result |
.... | ? | ? | ? |
0x1F | svcConnectToPort | X1=port_name_str | W0=result, W1=handle |
.... | ? | ? | ? |
0x21 | svcSendSyncRequest | X0=handle | W0=result |
0x22 | svcSendSyncRequestByBuf | X0=cmdbufptr, X1=size, X2=handle | W0=result |
.... | ? | ? | ? |
0x25 | svcGetThreadId | W0=thread_handle | W0=result, X1=out |
0x26 | svcBreak | X0,X1,X2=info | ? |
0x27 | svcOutputDebugString | X0=str, X1=size | |
0x28 | svcReturnFromException | X0=result | |
0x29 | #svcGetInfo | X1=info_id, X2=handle, X3=info_sub_id | W0=result, X1=out |
.... | ? | ? | ? |
0x40 | ??? | W2=?, X3=? | W0=result, W1=?, W2=? |
0x41 | svcAcceptSession | W1=port_handle | W0=result, W1=session_handle |
.... | ? | ? | ? |
0x43 | svcReplyAndReceive | X1=ptr_handles, W2=num_handles, X3=?, X4=timeout | W0=result, W1=handle_idx |
0x44 | svcReplyAndReceiveByBuf | X1=buf, X2=sz, X3=ptr_handles, W4=num_handles, X5=?, X6=timeout | W0=result, W1=handle_idx |
0x45 | svcCreateEvent? | None | W0=result, W1=?, W2=? |
.... | ? | ? | ? |
0x50 | svcCreateMemoryBlock | W1=size?, W2=perm0, W3=perm1 | W0=result, W1=handle |
0x51 | #svcMapMemoryMirror | X0=mirror_handle, X1=addr, X2=size, W3=perm | W0=result |
0x52 | #svcUnmapMemoryMirror | W0=mirror_handle, X1=addr, X2=size | W0=result |
svcProtectMemory
Bit2 of permission (exec) is not allowed.
Setting write-only is not allowed either (bit1).
svcSetMemoryState
State0 | State1 | Action |
---|---|---|
0 | 0 | Clear bit35 in #MemoryState. |
8 | 0 | Clear bit35 in #MemoryState. |
8 | 8 | Set bit35 in #MemoryState. |
This might used for switching between cached and non-cached mappings.
svcMirrorStack
Memory is only allowed to be mapped into a special region.
Code can get the range of this region from #svcGetInfo.
The source region gets reprotected to ---, and sets bit32 is set in #MemoryState.
svcSleepThread
Setting nano=0 means "yield thread".
svcCreateMemoryMirror
This one reprotects the src block with perms you give it. It also sets bit32 into #MemoryState.
Executable bit perm not allowed.
Closing the returned handle automatically causes the bit32 in #MemoryState to clear.
svcWaitSynchronizationN
Works with num_handles <= 0x40, error on num_handles == 0.
Does not accept 0xFFFF8001 or 0xFFFF8000 as handles.
svcGetInfo
Handle type | Id0 | Id1 | Description |
---|---|---|---|
Process | 0 | 0 | Code available mask. Always 0xF meaning all 4 cores available. |
Process | 1 | 0 | Always 0xfffffffff0000000. |
Process | 2 | 0 | Randomized unknown base-address. |
Process | 3 | 0 | Always 0x1000000000. |
Process | 4 | 0 | Randomized heap base-address. |
Process | 5 | 0 | Always 0x180000000. |
Process | 6 | 0 | Total memory usage? |
Process | 7 | 0 | Process heap size. |
Zero | 8 | 0 | Always 0. |
Zero | 9 | 0 | This creates and returns an unknown handle. |
Zero | 10 | -1, 0 | ? |
Zero | 11 | 0-3 | Returns random from TRNG. Used to seed usermode PRNGs. |
Process | 12 | 0 | Always 0x8000000. |
Process | 13 | 0 | Always 0x7ff8000000. |
Process | 14 | 0 | Start of stack mirror region. |
Process | 15 | 0 | Size of stack mirror region. |
svcMapMemoryMirror
The newly mapped pages will have #MemoryState type 0xE.
You must pass same size and permissions as given in svcCreateMemoryMirror, otherwise error.
svcUnmapMemoryMirror
Size must match size given in map syscall, otherwise there's an invalid-size error.
MemoryState
Lower 8 bits | Type | Meaning |
---|---|---|
0x3 | Code static | .text and .rodata |
0x4 | Code | .data |
0x5 | Heap | |
0x6 | Shared memory block | |
0x8 | Module code static | .text and .rodata |
0x9 | Module code | .data |
0xB | Stack mirror | |
0xC | Thread local storage | |
0xE | Memory mirror | |
0x10 | Reserved |
Bit32: is_mirrored
Bit35: is_uncached?