USB services
One symbol in USB-sysmodule is: "vtable for nn::usb::detail::UsbComplexTegra21x".
usb:ds
Used for Switch<>PC USB comms, aka Switch-as-device. This service is used during factory setup by manu.
| Cmd | Name |
|---|---|
| 0 | #BindComplex |
| 1 | #BindClientProcess |
| 2 | #GetDsInterface |
| 3 | #GetStateChangeEvent |
| 4 | |
| 5 | #SetVidPidBcd |
BindComplex
Takes an u32 (complexId). Manu sends 0x02.
BindClientProcess
Takes 1 copy-handle for the current process (0xFFFF8001).
GetDsInterface
Takes 2 type-5 buffers and returns an #IDsInterface. Manu sends a 0x09-byte command (e.g.: 0x09, 0x04, 0x04, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00) in the first buffer and a string ("usb") in the second buffer.
GetStateChangeEvent
Returns an event handle for state changes.
SetVidPidBcd
Takes a type-5 buffer with 0x66 bytes of USB descriptor data (see manu).
IDsInterface
| Cmd | Name |
|---|---|
| 0 | #GetDsEndpoint |
| 1 | #GetSetupEvent |
| 2 | |
| 3 | #EnableInterface |
| 4 | #DisableInterface |
| 5 | |
| 6 | |
| 7 | #GetCtrlInCompletionEvent |
| 8 | |
| 9 | #GetCtrlOutCompletionEvent |
| 10 | |
| 11 |
GetDsEndpoint
Takes a type-5 buffer and returns an #IDsEndpoint. Manu sends a 0x07-byte command (e.g.: 0x07, 0x05, 0x80, 0x02, 0x00, 0x02, 0x00) in the first buffer.
GetSetupEvent
Returns an event handle for interface setup changes.
EnableInterface
Takes no arguments. Enables the current interface.
DisableInterface
Takes no arguments. Disables the current interface.
GetCtrlInCompletionEvent
Returns an event handle for polling the completion of input control commands.
GetCtrlOutCompletionEvent
Returns an event handle for polling the completion of output control commands.
IDsEndpoint
| Cmd | Name |
|---|---|
| 0 | #PostBufferAsync |
| 1 | |
| 2 | |
| 3 | #GetReportData |
| 4 | |
| 5 |
PostBufferAsync
Takes an u32 (size) and an u64 (buffer).
GetReportData
Returns 0x84 bytes of report data from the endpoint.
usb:hs
General USB devices usage, used by hid-sysmodule and bsdsockets-sysmodule.
usb:pd
Only system-titles with access to this are PTM and AM.
usb:pd:c
USB-sysmodule symbols for this refer to "Cradle", which is the Dock.
usb:pm
Presumably Power Management, only system-title using this is PTM.