SSL services
ssl
This is "nn::ssl::sf::ISslService".
| Cmd | Name |
|---|---|
| 0 | CreateContext |
| 1 | GetContextCount |
| 2 | GetCertificates |
| 3 | GetCertificateBufSize |
| 4 | DebugIoctl |
| 5 | SetInterfaceVersion |
ISslContext
| Cmd | Name |
|---|---|
| 0 | SetOption |
| 1 | GetOption |
| 2 | CreateConnection |
| 3 | GetConnectionCount |
| 4 | ImportServerPki |
| 5 | ImportClientPki |
| 6 | RemoveServerPki |
| 7 | RemoveClientPki |
| 8 | RegisterInternalPki |
| 9 | AddPolicyOid |
| 10 | ImportCrl |
| 11 | RemoveCrl |
ISslConnection
| Cmd | Name |
|---|---|
| 0 | SetSocketDescriptor |
| 1 | SetHostName |
| 2 | SetVerifyOption |
| 3 | SetIoMode |
| 4 | GetSocketDescriptor |
| 5 | GetHostName |
| 6 | GetVerifyOption |
| 7 | GetIoMode |
| 8 | DoHandshake |
| 9 | DoHandshakeGetServerCert |
| 10 | Read |
| 11 | Write |
| 12 | Pending |
| 13 | Peek |
| 14 | Poll |
| 15 | GetVerifyCertError |
| 16 | GetNeededServerCertBufferSize |
| 17 | SetSessionCacheMode |
| 18 | GetSessionCacheMode |
| 19 | FlushSessionCache |
| 20 | SetRenegotiationMode |
| 21 | GetRenegotiationMode |
| 22 | SetOption |
| 23 | GetOption |
| 24 | GetVerifyCertErrors |
Client cert+privk
SSL-sysmodule uses set:cal GetSslKey and GetSslCert. The rest of this section documents handling for the former, which can be decrypted with SPL.
key* below refers to the 3 0x10-byte input blocks passed to this code.
When actual_size is:
- 0x100+0x10: If the u32 actual_size is less than (u32)-0x11, and the last 0x10-bytes of the actual-data are all-zero, the data is copied to the output as raw plaintext. If a non-zero byte is found, it will continue with SPL usage, skipping over the SPL block for the devunit flag. In this case, key=key0 and the flag passed to SPL later is set to 0.
- 0x100+0x30: Size must match this if it's not the above, otherwise error 0xC81A is returned. The flag passed to SPL later is set to 1 in this case. Runs the devunit-flag-block: uses SPL_services#SPL#GetDevunitFlag. key = key1 when out_flag!=0, key2 otherwise.