SVC

System calls

Id	Name	In	Out
0x1	#svcSetHeapSize	W1=size	W0=result, X1=outaddr
0x2	#svcProtectMemory	X0=addr, X1=size, W2=prot	W0=result
0x3	#svcSetMemoryState	X0=addr, X1=size, W2=state0, W3=state1	W0=result
0x4	#svcMirrorStack	X0=dstaddr, X1=srcaddr, X2=size	W0=result
0x5	svcUnmirrorStack	X0=dstaddr, X1=srcaddr, X2=size	W0=result
0x6	svcQueryMemory	X0=meminfo_ptr, X2=addr	W0=result, W1=pageinfo
0x7	svcExitProcess	None
0x8	#svcCreateThread	X1=entry, X2=arg, X3=stacktop, W4=prio, W5=processor_id	W0=result, W1=handle
0x9	svcStartThread	W0=thread_handle
0xA	svcExitThread	None
0xB	#svcSleepThread	X0=nano
0xC	svcGetThreadPriority	W1=thread_handle	W0=result, W1=prio
0xD	svcSetThreadPriority	W0=thread_handle, W1=prio	W0=result
0xE	svcGetThreadAffinityMask	W2=thread_handle	W0=result, W1=out, X2=out
0xF	svcSetThreadAffinityMask	W0=thread_handle, W1=in, X2=in2	W0=result
0x10	svcGetCurrentProcessorNumber	None	W0/X0=cpuid
0x11	svcGetMemoryBlockSomethingA?	W0=handle	?
0x12	svcGetMemoryBlockSomethingB?	W0=handle	?
0x13	svcMapMemoryBlock	W0=memblk_handle, X1=addr, X2=size, W3=perm	W0=result
0x14	svcUnmapMemoryBlock	W0=memblk_handle, X1=addr, X2=size	W0=result
0x15	#svcCreateMemoryMirror	X1=addr, X2=size, W3=perm	W0=result, W1=handle
0x16	svcCloseHandle	W0=handle	W0=result
0x17	svcClearEvent	W0=handle	W0=result
0x18	#svcWaitEvents	X1=handles_ptr, W2=num_handles. X3=timeout	W0=result, W1=handle_idx
0x19	svcSignalEvent	W0=handle	W0=result
0x1A	svcLockMutex	W0=cur_thread_handle, X1=ptr, W2=req_thread_handle
0x1B	svcUnlockMutex	X0=ptr
0x1C	svcCondWait	X0=ptr0, X1=ptr, W2=thread_handle, X3=timeout	W0=result
0x1D	svcCondBroadcast	X0=ptr, W1=value	W0=result
....	?	?	?
0x1F	svcConnectToPort	X1=port_name_str	W0=result, W1=handle
....	?	?	?
0x21	svcSendSyncRequest	X0=handle	W0=result
0x22	svcSendSyncRequestByBuf	X0=cmdbufptr, X1=size, X2=handle	W0=result
....	?	?	?
0x25	svcGetThreadId	W0=thread_handle	W0=result, X1=out
0x26	svcBreak	X0,X1,X2=info	?
0x27	svcOutputDebugString	X0=str, X1=size
0x28	svcReturnFromException	X0=result
0x29	#svcGetInfo	X1=info_id, X2=handle, X3=info_sub_id	W0=result, X1=out
....	?	?	?
0x40	???	W2=?, X3=?	W0=result, W1=?, W2=?
0x41	svcAcceptSession	W1=port_handle	W0=result, W1=session_handle
....	?	?	?
0x43	svcReplyAndReceive	X1=ptr_handles, W2=num_handles, X3=?, X4=timeout	W0=result, W1=handle_idx
0x44	svcReplyAndReceiveByBuf	X1=buf, X2=sz, X3=ptr_handles, W4=num_handles, X5=?, X6=timeout	W0=result, W1=handle_idx
0x45	svcCreateSession	None	W0=result, W1=client_handle, W2=server_handle
....	?	?	?
0x50	svcCreateMemoryBlock	W1=size?, W2=perm0, W3=perm1	W0=result, W1=handle
0x51	#svcMapMemoryMirror	X0=mirror_handle, X1=addr, X2=size, W3=perm	W0=result
0x52	#svcUnmapMemoryMirror	W0=mirror_handle, X1=addr, X2=size	W0=result

svcSetHeapSize

Size must be a multiple of 0x2000000. The heap base-address is written to out.

svcProtectMemory

Bit2 of permission (exec) is not allowed.

Setting write-only is not allowed either (bit1).

svcSetMemoryState

State0	State1	Action
0	0	Clear bit35 in #MemoryState.
8	0	Clear bit35 in #MemoryState.
8	8	Set bit35 in #MemoryState.

This might used for switching between cached and non-cached mappings.

svcMirrorStack

Memory is only allowed to be mapped into a special region.

Code can get the range of this region from #svcGetInfo.

The source region gets reprotected to ---, and sets bit32 is set in #MemoryState.

svcCreateThread

Processor_id must be 0,1,2,3 or -2.

svcSleepThread

Setting nano=0 means "yield thread".

svcCreateMemoryMirror

This one reprotects the src block with perms you give it. It also sets bit32 into #MemoryState.

Executable bit perm not allowed.

Closing all handles automatically causes the bit32 in #MemoryState to clear, and the permission to reset.

svcWaitSynchronizationN

Works with num_handles <= 0x40, error on num_handles == 0.

Does not accept 0xFFFF8001 or 0xFFFF8000 as handles.

svcBreak

When used on retail where inx0 bit31 is clear, the system will throw a fatal-error. Otherwise when bit31 is set, it will return 0.

svcGetInfo

Handle type	Id0	Id1	Description
Process	0	0	Core available mask. Always 0xF meaning all 4 cores available.
Process	1	0	Always 0xfffffffff0000000.
Process	2	0	Randomized unknown base-address.
Process	3	0	Always 0x1000000000.
Process	4	0	Randomized heap base-address.
Process	5	0	Always 0x180000000.
Process	6	0	Total memory usage?
Process	7	0	Process heap size.
Zero	8	0	Always 0. Used during exception handling.
Zero	9	0	This creates and returns an unknown handle.
Zero	10	-1, {current coreid}	Unknown. Output data changes each time this SVC is used. Global and core-specific tick-count?
Zero	11	0-3	Returns random from TRNG. Used to seed usermode PRNGs. Unknown what exactly causes this output to change, however it does change when exiting+launching a process.
Process	12	0	Always 0x8000000.
Process	13	0	Always 0x7ff8000000.
Process	14	0	Start of stack mirror region.
Process	15	0	Size of stack mirror region.

svcMapMemoryMirror

The newly mapped pages will have #MemoryState type 0xE.

You must pass same size and permissions as given in svcCreateMemoryMirror, otherwise error.

svcUnmapMemoryMirror

Size must match size given in map syscall, otherwise there's an invalid-size error.

MemoryState

Lower 8 bits	Type	Meaning
0x3	Code static	.text and .rodata
0x4	Code	.data
0x5	Heap
0x6	Shared memory block
0x8	Module code static	.text and .rodata
0x9	Module code	.data
0xB	Stack mirror
0xC	Thread local storage
0xE	Memory mirror
0x10	Reserved

Bit32: is_mirrored Bit34: is_nv_locked Bit35: is_uncached?

Exception Handling

There appears to be userland code for handling exceptions, however this doesn't seem to be executed on retail.

On usermode exception, it jumps to main code binary entrypoint (main_binary_address+0) with X0=exception_info_ptr and X1=exception_info2_ptr. On boot, X0 is set to 0 triggering normal crt0 setup.