Display services

The only image data contained in this sysmodule is basically a saved display framebuffer, no image data for actively-used layers/framebuffers.

caps:sc

This is "nn::capsrv::sf::IScreenShotControlService". This is available with [2.0.0+].

Cmd	Name	Notes
1
2
3	[5.0.0+] ?	Takes a total of 8-bytes of input, no output.
5	[5.0.0+] ?	Takes a total of 0x10-bytes of input, no output.
210	[6.0.0+] ?	Takes a total of 0x50-bytes of input, a type-0x15 input buffer, and a type-0x45 input buffer, returns a total of 0x20-bytes of output.
[2.0.0-4.1.0] 1001		Takes a total of 0x10-bytes of input, no output.
[2.0.0-4.1.0] 1002		Takes a total of 0x18-bytes of input, no output.
[3.0.0-4.1.0] 1003		Takes a total of 0x58-bytes of input, no output.
1004	[5.0.0+] ?	Takes a total of 0x60-bytes of input, no output.
1009	[5.0.0+] ?	Takes a total of 0x10-bytes of input, no output.
1010	[5.0.0+] ?	Takes a total of 0x10-bytes of input, no output.
1011		Takes a total of 8-bytes of input, no output.
1012		Takes a total of 8-bytes of input, no output.
1101	[4.0.0+] ?
1106	[4.0.0+] ?
1107	[4.0.0+] ?
1201	[3.0.0+] ?	Takes a total of 0x10-bytes of input, returns a total of 0x18-bytes of output.
1202	[3.0.0+] ?	No input/output.
1203	[3.0.0+] ?	Takes a total of 8-bytes of input and a type-0x6 output buffer, returns a total of 8-bytes of output.

• cmd210: User-processes use hard-coded size 0x88 for the type-0x15 buffer.
• cmd1106/1107: User-processes use hard-coded sizes 0x400 and 0x404 for the first/second type-0x15 buffers.
• cmd1201/1202/1203: These are only usable when the previously loaded value from set:sys GetDebugModeFlag is set.

The only caps:sc commands used by GRC are: 1101, 1106, and 1107.

Cmd1

Takes a type-0x46 output buffer, an input u32, two input u64s width/height, an input s64 buffer_count, and an input s64 buffer_index.

width/height must match 1280/720. buffer_index must be < buffer_count. buffer_index and buffer_count must not be negative.

buffer_index and buffer_count correspond to buffers with size 0x384000(1280*720*4).

Value 0 is usable for the input u32.

This takes a screenshot, the output buffer contains the RGBA8 image.

Stubbed with [5.0.0+], where it now returns error 0x7FECE.

Cmd2

Calls the same internal func as cmd1, where the last param is an additional cmd input u64 instead of hard-coded value 0x5f5e100.

Stubbed with [5.0.0+], where it now returns error 0x7FECE.

Cmd1101

Takes two input u64s width/height, a 0x18-byte input struct, and two type-0x46 output buffers.

For the input struct, GRC uses the output from caps:c cmd2101.

width/height must be 1280x720. The first buffer address must be 0x400-byte aligned. The size of the first buffer must be at least width*height, and must be aligned to 0x20000-bytes.

The requirements for the second buffer address/size are the same as the first buffer, except the minimum size is (width*height)/2.

Cmd1106

Takes a 0x40-byte input struct, two input u64s width/height, a 0x18-byte input struct, two type-0x15 input buffers, a type-0x6 output buffer, and two type-0x46 output buffers, returns 3 output u64s.

width/height have same requirements as #Cmd1101. The size of the type-0x6 buffer must be at least 0x7D000. The requirements for the type-0x46 buffers are the same as #Cmd1101.

Cmd1107

Takes a 0x40-byte input struct, two input u64s width/height, a 0x18-byte input struct, two type-0x15 input buffers, a type-0x6 output buffer, and a type-0x45 input buffer, returns 3 output u64s.

width/height have same requirements as #Cmd1101. The size of the type-0x6 buffer must be at least 0x7D000. The size of the type-0x45 buffer must be at least 0x384000.

caps:ss

This is "nn::capsrv::sf::IScreenShotService". This is available with [2.0.0+].

Cmd	Name
201
202
203
204

caps:su

This is "nn::capsrv::sf::IScreenShotApplicationService". This was moved to AM with [6.0.0+].

Cmd	Name
201	SaveScreenShot
203	SaveScreenShotEx0

cec-mgr

This is "nn::cec::ICecManager".

Cmd	Name
0
1
2
3
4
5
6

mm:u

This is "nn::mmnv::IRequest".

NVIDIA multimedia (NvMM) platform service.

Cmd	Name
0	InitializeOld
1	FinalizeOld
2	SetAndWaitOld
3	GetOld
4	Initialize
5	Finalize
6	SetAndWait
7	Get

vi:u

This is "nn::visrv::sf::IApplicationRootService".

Cmd	Name
0	GetDisplayService

GetDisplayService

Returns an #IApplicationDisplayService. Takes an input u32, user-processes use 0 or 1, with 0 for regular-applications normally. 0 = user-service(vi:u), 1 = non-user-service? Returns an error when using value 1 with vi:u(same error listed below for IApplicationDisplayService for unavailable commands).

vi:s

This is "nn::visrv::sf::ISystemRootService".

Cmd	Name
1	GetDisplayService
3	GetDisplayServiceWithProxyNameExchange

GetDisplayService

Returns an #IApplicationDisplayService. Same input as vi:u.

GetDisplayServiceWithProxyNameExchange

Returns an #IApplicationDisplayService.

vi:m

This is "nn::visrv::sf::IManagerRootService".

Cmd	Name
2	GetDisplayService
3	GetDisplayServiceWithProxyNameExchange

GetDisplayService

Returns an #IApplicationDisplayService. Same input as vi:u.

GetDisplayServiceWithProxyNameExchange

Takes an input u64 and u32. Returns an #IApplicationDisplayService.

IApplicationDisplayService

This is "nn::visrv::sf::IApplicationDisplayService".

Cmd	Name
100	#GetRelayService
101	#GetSystemDisplayService
102	#GetManagerDisplayService
103	[2.0.0+] #GetIndirectDisplayTransactionService
1000	#ListDisplays
1010	#OpenDisplay
1011	#OpenDefaultDisplay
1020	#CloseDisplay
1101	#SetDisplayEnabled
1102	#GetDisplayResolution
2020	#OpenLayer
2021	#CloseLayer
2030	#CreateStrayLayer
2031	#DestroyStrayLayer
2101	#SetLayerScalingMode
2102	[5.0.0+] ConvertScalingMode
2450	#GetIndirectLayerImageMap
2451	#GetIndirectLayerImageCropMap
2460	#GetIndirectLayerImageRequiredMemoryInfo
5202	#GetDisplayVsyncEvent
5203	#GetDisplayVsyncEventForDebug

Available sessions for each service:

• "vi:u": Only GetRelayService.
• "vi:s": Everything except GetManagerDisplayService.
• "vi:m": All.

When attempting to use a get-session cmd with a service it's not available with, error 0xA72 is returned.

These commands using PIDs have AppletResourceUserId as the last input u64, hence AppletResourceUserId must match the user-process PID(no special handling for value 0).

GetRelayService

Returns an IHOSBinderDriver interface which abstracts "nn::visrv::service::RelayServiceImpl".

GetIndirectDisplayTransactionService

Returns an IHOSBinderDriver interface which abstracts "nn::visrv::service::IndirectDisplayTransactionServiceImpl".

GetSystemDisplayService

Returns an #ISystemDisplayService.

GetManagerDisplayService

Returns an #IManagerDisplayService.

ListDisplays

Takes a type-0x6 output buffer containing the array of #DisplayInfo output entries. Returns an output u64: total number of output entries.

Normally(?) this only returns the "Default" display.

OpenDisplay

Takes a #DisplayName as input. Returns an output u64, the DisplayId.

To open the default display, input string "Default" can be used.

OpenDefaultDisplay

Returns an output u64.

Probably not (?) used by newer official user-processes, since those use OpenDisplay with the default string instead.

CloseDisplay

Takes an input u64, DisplayId.

SetDisplayEnabled

Takes an input u32 boolean, and an u64 DisplayId.

GetDisplayResolution

Takes an input u64 DisplayId and returns two output u64s: width and height.

OpenLayer

Takes a PID-descriptor, a type-0x6 buffer for the output #NativeWindow, a #DisplayName(which was previously used with #OpenDisplay), an u64 LayerId, and an u64 AppletResourceUserId. Returns an output u64 NativeWindow_Size.

Official user-processes use a LayerId stored in a global state field("...ExternalLayerId") if non-zero, otherwise:

• When AppletResourceUserId==0, #CreateStrayLayer is used instead of the OpenLayer cmd.
• When AppletResourceUserId!=0, AM_services#CreateManagedDisplayLayer is used and the output from that is used for LayerId with the OpenLayer cmd.

This OpenLayer command returns error 0x272 when the AppletResourceUserId is invalid.

CloseLayer

Takes an input u64: LayerId which was used with #OpenLayer.

CreateStrayLayer

Takes a type-0x6 buffer for the output #NativeWindow, an u32(LayerFlags bitmask), and an u64 DisplayId. Returns two output u64s: LayerId and NativeWindow_Size.

DestroyStrayLayer

Takes an input u64: LayerId from #CreateStrayLayer.

SetLayerScalingMode

Takes an input u64("ScalingMode") and u64 ("LayerId").

GetIndirectLayerImageMap

Takes a PID-descriptor, an type-0x46 buffer, and four u64s: width(s32), height(s32), <output from AM GetIndirectLayerConsumerHandle>, and AppletResourceUserId. Returns two output u64s.

Calls the same func as #GetIndirectLayerImageCropMap internally, with the input floats set to 0.0f, then 1.0f for the rest.

GetIndirectLayerImageCropMap

Takes a PID-descriptor, an type-0x46 buffer, four floats, four u64s(last u64 is AppletResourceUserId). Returns two output u64s. The floats are stored immediately after each other(32bits).

GetIndirectLayerImageRequiredMemoryInfo

Takes two input u64s: width and height. Returns two output u64s. First u64 is the buffer size to use with the ImageMap cmds, second u64 is the buffer address alignment for those cmds.

GetDisplayVsyncEvent

Takes an input u64 DisplayId and returns a handle.

GetDisplayVsyncEventForDebug

Takes an input u64 DisplayId and returns a handle.

ISystemDisplayService

This is "nn::visrv::sf::ISystemDisplayService".

Cmd	Name
1200	GetZOrderCountMin
1202	GetZOrderCountMax
1203	GetDisplayLogicalResolution
1204	SetDisplayMagnification
2201	SetLayerPosition
2203	SetLayerSize
2204	GetLayerZ
2205	SetLayerZ
2207	SetLayerVisibility
2209	SetLayerAlpha
[1.0.0-6.2.0] 2312	CreateStrayLayer
2400	OpenIndirectLayer
2401	CloseIndirectLayer
2402	FlipIndirectLayer
3000	ListDisplayModes
3001	ListDisplayRgbRanges
3002	ListDisplayContentTypes
3200	GetDisplayMode
3201	SetDisplayMode
3202	GetDisplayUnderscan
3203	SetDisplayUnderscan
3204	GetDisplayContentType
3205	SetDisplayContentType
3206	GetDisplayRgbRange
3207	SetDisplayRgbRange
3208	GetDisplayCmuMode
3209	SetDisplayCmuMode
3210	GetDisplayContrastRatio
3211	SetDisplayContrastRatio
3214	GetDisplayGamma
3215	SetDisplayGamma
3216	GetDisplayCmuLuma
3217	SetDisplayCmuLuma
8225	[4.0.0+] GetSharedBufferMemoryHandleId
8250	[4.0.0+] OpenSharedLayer
8251	[4.0.0+] CloseSharedLayer
8252	[4.0.0+] ConnectSharedLayer
8253	[4.0.0+] DisconnectSharedLayer
8254	[4.0.0+] AcquireSharedFrameBuffer
8255	[4.0.0+] PresentSharedFrameBuffer
8256	[4.0.0+] GetSharedFrameBufferAcquirableEvent
8257	[4.0.0+] FillSharedFrameBufferColor
8258	[5.0.0+] CancelSharedFrameBuffer

IManagerDisplayService

This is "nn::visrv::sf::IManagerDisplayService".

Cmd	Name
200	[4.0.0+] AllocateProcessHeapBlock
201	[4.0.0+] FreeProcessHeapBlock
1102	GetDisplayResolution
2010	CreateManagedLayer
2011	DestroyManagedLayer
2012	[7.0.0+] CreateStrayLayer
2050	CreateIndirectLayer
2051	DestroyIndirectLayer
2052	CreateIndirectProducerEndPoint
2053	DestroyIndirectProducerEndPoint
2054	CreateIndirectConsumerEndPoint
2055	DestroyIndirectConsumerEndPoint
2300	AcquireLayerTexturePresentingEvent
2301	ReleaseLayerTexturePresentingEvent
2302	GetDisplayHotplugEvent
2402	GetDisplayHotplugState
2501	[4.0.0+] GetCompositorErrorInfo
2601	[4.0.0+] GetDisplayErrorEvent
4201	SetDisplayAlpha
4203	SetDisplayLayerStack
4205	SetDisplayPowerState
4206	[4.0.0+] SetDefaultDisplay
6000	AddToLayerStack
6001	RemoveFromLayerStack
6002	SetLayerVisibility
6003	[5.0.0+] SetLayerConfig
6004	[5.0.0+] AttachLayerPresentationTracer
6005	[5.0.0+] DetachLayerPresentationTracer
6006	[5.0.0+] StartLayerPresentationRecording
6007	[5.0.0+] StopLayerPresentationRecording
6008	[5.0.0+] StartLayerPresentationFenceWait
6009	[5.0.0+] StopLayerPresentationFenceWait
6010	[5.0.0+] GetLayerPresentationAllFencesExpiredEvent
7000	SetContentVisibility
8000	SetConductorLayer
8100	SetIndirectProducerFlipOffset
8200	[4.0.0+] CreateSharedBufferStaticStorage
8201	[4.0.0+] CreateSharedBufferTransferMemory
8202	[4.0.0+] DestroySharedBuffer
8203	[4.0.0+] BindSharedLowLevelLayerToManagedLayer
8204	[4.0.0+] BindSharedLowLevelLayerToIndirectLayer
8207	[4.0.0+] UnbindSharedLowLevelLayer
8208	[4.0.0+] ConnectSharedLowLevelLayerToSharedBuffer
8209	[4.0.0+] DisconnectSharedLowLevelLayerFromSharedBuffer
8210	[4.0.0+] CreateSharedLayer
8211	[4.0.0+] DestroySharedLayer
8216	[4.0.0+] AttachSharedLayerToLowLevelLayer
8217	[4.0.0+] ForceDetachSharedLayerFromLowLevelLayer
8218	[4.0.0+] StartDetachSharedLayerFromLowLevelLayer
8219	[4.0.0+] FinishDetachSharedLayerFromLowLevelLayer
8220	[4.0.0+] GetSharedLayerDetachReadyEvent
8221	[4.0.0+] GetSharedLowLevelLayerSynchronizedEvent
8222	[4.0.0+] CheckSharedLowLevelLayerSynchronized
8223	[4.0.0+] RegisterSharedBufferImporterAruid
8224	[4.0.0+] UnregisterSharedBufferImporterAruid
8227	[4.0.0+] CreateSharedBufferProcessHeap
8228	[4.0.0+] GetSharedLayerLayerStacks
8229	[4.0.0+] SetSharedLayerLayerStacks
8291	[4.0.0+] PresentDetachedSharedFrameBufferToLowLevelLayer
8292	[4.0.0+] FillDetachedSharedFrameBufferColor
8293	[4.0.0+] GetDetachedSharedFrameBufferImage
8294	[4.0.0+] SetDetachedSharedFrameBufferImage
8295	[4.0.0+] CopyDetachedSharedFrameBufferImage
8296	[4.0.0+] SetDetachedSharedFrameBufferSubImage
8297	[4.0.0+] GetSharedFrameBufferContentParameter
8298	[5.0.0+] ExpandStartupLogoOnSharedFrameBuffer

DisplayInfo

Offset	Size	Description
0x0	0x40	#DisplayName
0x40	0x1	Whether or not the display has a constrained number of layers.
0x41	0x7	Padding/Reserved
0x48	0x8	If this display has a constrained number of layers (0x40 is set), indicates the maximum number of layers.
0x50	0x8	Width in pixels
0x58	0x8	Height in pixels

This is a 0x60-byte structure.

The width/height for the "Default" Display is the resolution for 1080p even when in handheld-mode.

DisplayName

This is a 0x40-byte block: a NUL-terminated string.

Can be "Default", "External", "Edid", "Internal" or "Null".

Parcel

Offset	Size	Description
0x0	0x4	ParcelDataSize
0x4	0x4	ParcelDataOffset
0x8	0x4	ParcelObjectsSize
0xC	0x4	ParcelObjectsOffset
0x10	?	FlattenedBinder

NativeWindow

Max size of this buffer is 0x100-bytes(outbuf size used by official user-processes). Parsed("...DeserializeNativeWindow()") by a function called by the code described under #OpenLayer, which executes code with Android symbols.

This is a #Parcel.

ParcelData

This normally contains the following:

Offset	Size	Description
0x0	0x4	0x2
0x4	0x4	Probably the user-process PID?
0x8	0x4	ID
0xC	0xC	All-zero normally?
0x18	0x8	NUL-terminated "dispdrv" string.
0x20	0x8	All-zero normally?

The above ID is used for the ID param for the binder commands with IHOSBinderDriver.

ParcelObjects

This normally contains an u32 with value 0?

Resolution handling

There doesn't seem to be a way to get the actual TV resolution while using the "Default" Display. Official apps just hard-code what resolution to use depending on the current OperationMode.