Software Keyboard

The software keyboard (swkbd) expects to be passed three IStorages. See also AM_services#Library_Applets.

The below is for normal swkbd usage. There's also InlineKeyboard, which doesn't run in the foreground and has completely different input/output IStorages. It also doesn't seem to display on the screen (or is optional at least): the user-process can get the gfx data via Display_services.

Library Applet Versions

System Version	Value
	0x0..0x1
	0x2
	0x3..4
[1.0.0+]	0x5
[2.0.0+]	0x10006
[3.0.0+]	0x30007
[4.0.0+]	0x40008
[5.0.0+]	0x50009

KeyboardConfig

The second IStorage passed to this applet should contain the configuration for the keyboard.

Offset	Size	Typical Value	Notes
0x0	4	2
0x4	18	0	UTF-16 text displayed in the submit button
0x16	2	0	UTF-16 "left optional symbol key"
0x18	2	0	UTF-16 "right optional symbol key"
0x1A	1	0
0x1C	4	0	Key set disable bitmask
0x20	4	1	Initial cursor position (0 = start of string, 1 = end of string)
0x24	130	u""	UTF-16 header text
0xA6	258	u""	UTF-16 sub text
0x1A8	514	u""	UTF-16 guide text
0x3AC	4	0	String length limit (defaults to 500?)
0x3B0	4	0
0x3B4	4	0	Password flag (0 = not password, 1 = password)
0x3B8	4	1
0x3BC	2	1
0x3BE	1	1	Draw background (0 = no, 1 = yes)
0x3C0	4	20	Offset of initial string in work buffer (or 0)
0x3C4	4	0	Size of initial string in work buffer (bytes)
0x3C8	4	2024	Offset of user dictionary in work buffer (or 0)
0x3CC	4	0	Length of user dictionary (number of entries)
0x3D0	1	0	#Text check enable
0x3D8	8	0	#Text check callback function address. Not sure why this is included here
0x3E0	8	-1
0x3E8	8	-1
0x3F0	8	-1
0x3F8	8	-1

This struct is 0x3E0-bytes with version 0x5. Starting with version 0x30007 this struct is 0x400-bytes.

The 0x20-bytes at offset 0x3E0 is -1 normally, except for DownloadCodes. This is presumably an extension to #Key Set Disable Bitmask?(The field at 0x1C is still set to 0x80 here)

If the length limit is <= 32, the text entry box will be a single row and show the header/sub text. Otherwise, it will use multiple rows and the header/sub text will not be shown.

Each entry in the user dictionary is 100 bytes long.

Key Set Disable Bitmask

Various bits in this field disable certain keys on the keyboard. This list is incomplete.

0x02: disable ' '
0x04: disable '@'
0x08: disable '%'
0x10: disable '\' and '/'
0x40: disable numbers
0x80: used for download codes

Work Buffer

This is the third IStorage passed to this applet. It is a transfer memory storage. The transfer memory should have size 0x1000 (0xd000 in certain cases) and permissions 0.

The layout of the work buffer doesn't seem to matter as long as the offsets in the #KeyboardConfig are adjusted, but official code lays it out like this.

Prior to version 0x5, offset 0x0 size 0x14(20) is a header (size 0x10 for version <=0x2).

Offset	Size	Notes
20 (decimal)	Unknown	UTF-16 initial string
2024 (decimal)	Unknown	User dictionary

Text Check

If text checking is enabled in #KeyboardConfig, text will be checked when the submit button is pressed. First, swkbd sends the text via PushInteractiveOutData. Normally size 0x7D4 is allocated for the string.

Offset	Size	Notes
0x0	0x4	Buffer size
0x4	Variable	UTF-16 text

The application then has an opportunity to validate or reject the text. It creates a new IStorage, writes the response to it, and sends it via PushInteractiveInData. This storage is 0x7D8-bytes.

Offset	Size	Notes
0x0	0x4	Status (0 = OK, 1 = bad)
0x4	Variable	UTF-16 error message (shown in a dialog box)

Output

When either the submit button is pressed and input has been validated, or the user cancels the text entry, swkbd will push its response and exit. The response IStorage has the following format. This storage is 0x7D8-bytes.

Offset	Size	Notes
0x0	0x4	Result code (0 = OK, 1 = Cancel)
0x4	Variable	UTF-16 text