Switch System Flaws

System Flaws are used to execute unofficial code (homebrew) on the Nintendo Switch. This page is a list of known and public Switch System Flaws.

List of Switch System Flaws

Hardware

Summary	Description	Fixed with hardware model/revision	Newest hardware model/revision this flaw was checked for	Timeframe this was discovered	Discovered by
No public hardware exploits

System software

Stage 1 Bootloader

Summary	Description	Successful exploitation result	Fixed in system version	Last system version this flaw was checked for	Timeframe this was discovered	Public disclosure timeframe	Discovered by
Null-dereference in panic()	The Switch's stage 1 bootloader, on panic(), clears the stack and then attempts to clear the Security Engine. However, it does so by dereferencing a pointer to the SE in .bss (initially NULL), and this pointer doesn't get initialized until partway into the bootloader's main() after several functions that might panic() are called. Thus, a panic() caused prior to SE initialization would result in the SE pointer still being NULL when dereferenced. This would cause a data abort, causing the bootloader to clear the stack and then try to clear the security engine...dereferencing NULL again, over and over in a loop. In 3.0.0, this was fixed by moving the security engine initialization earlier in main(), before the first function that could potentially panic().	Infinite clear-the-stack-then-data-abort loop very early in boot, before SBK/other keyslots are cleared. Probably useless for anything more interesting.	3.0.0	3.0.0	Early July, 2017	July 30, 2017	Everyone who diff'd 2.3.0 and 3.0.0 Package1

TrustZone

Summary	Description	Successful exploitation result	Fixed in system version	Last system version this flaw was checked for	Timeframe this was discovered	Public disclosure timeframe	Discovered by
No public ARM TrustZone exploits

Kernel

Summary	Description	Successful exploitation result	Fixed in system version	Last system version this flaw was checked for	Timeframe this was discovered	Public disclosure timeframe	Discovered by
GetLastThreadInfo UAF	GetLastThreadInfo syscall gets last-scheduled-KThread pointer from KScheduler object. This pointer is not reference counted, and can be pointing to a freed KThread.	Nothing. There is a theoretical race that might leak from a KThread from a different process, but it's impossible to trigger practically.	Unfixed		15 October	17 October	plutoo
Bad irq_id check in CreateInterruptEvent	CreateInterruptEvent syscall is designed to work only for irq_id >= 32. All irq_ids < 32 are "per-core" and reserved for kernel use (watchdog/scheduling/core communications). On 1.0.0 you could supply irq_id < 32 and it would write outside the SharedIrqs table.	You can register irq's in the Core3Irqs table, and thus register per-core irqs for core3, that are normally reserved for kernel. Useless.	1.0.0	1.0.0	~October	17 October	plutoo

FIRM-package System Modules

Summary	Description	Successful exploitation result	Fixed in system version	Last system version this flaw was checked for	Timeframe this was discovered	Public disclosure timeframe	Discovered by
Service access control bypass (sm:h, smhax, probably other names)	Prior to 3.0.1, the service manager (sm) built-in system module treats a user as though it has full permissions if the user creates a new "sm:" port session but bypasses initialization. This is due to the other sm commands skipping the service ACL check for Pids <= 7 (i.e. all kernel bundled modules) and that skipping the initialization command leaves the Pid field uninitialized. In 3.0.1, sm returns error code 0x415 if Initialize has not been called yet.	Acquiring, registering, and unregistering arbitrary services	3.0.1	3.0.1	May 2017	August 17, 2017	Everyone

System Modules

Summary	Description	Successful exploitation result	Fixed in system version	Last system version this flaw was checked for	Timeframe this was discovered	Public disclosure timeframe	Discovered by
Out-of-bounds array read for BCAT_Content_Container secret-data index	The BCAT_Content_Container secret-data index is not validated at all. This is handled before the RSA-signature(?) is ever used. Since the field is an u8, a total of 0x800-bytes relative to the array start can be accessed. This is not useful since the string loaded from this array is only involved with key-generation.		Unknown	2.0.0	August 4, 2017	August 6, 2017	Shiny Quagsire, Yellows8 (independently)
OOB Read in NS system module (pl:utoohax, pl:utonium, maybe other names)	Prior to 3.0.0, pl:u (Shared Font services implemented in the NS sysmodule) service commands 1,2,3 took in a signed 32-bit index and returned that index of an array but did not check that index at all. This allowed for an arbitrary read within a 34-bit range (33-bit signed) from NS .bss. In 3.0.0, sending out of range indexes causes error code 0x60A to be returned.	Dumping full NS .text, .rodata and .data, infoleak, etc	3.0.0	3.0.0	April 2017	On exploit's fix in 3.0.0	qlutoo, Reswitched team (independently)
Unchecked domain ID in common IPC code	Prior to 2.0.0, object IDs in domain messages are not bounds checked. This out-of-bounds read could be exploited to brute-force ASLR and get PC control in some services that support domain messages.		2.0.0