WLAN services

wlan:inf

This is "nn::wlan::detail::IInfraManager".

Cmd	Name
0	#OpenMode
1	#CloseMode
2	#GetMacAddress
3	#StartScan
4	#StopScan
5	#Connect
6	#CancelConnect
7	#Disconnect
8	#GetSystemEvent
9	#GetConnectionStatus
10	#GetState
11	#GetScanResult
12	#GetRssi
13	#ChangeRxAntenna
14	#GetFwVersion
15	#RequestSleep
16	#RequestWakeUp
17	#ConnectWithWps
18	[3.0.0+]
19	[3.0.0+]
20	[3.0.0+]
21	[3.0.0+]
22	[3.0.0+]
23	[3.0.0+]
24	[3.0.0+]
25	[3.0.0+]
26	[4.0.0+]
27	[4.0.0+]
28	[5.0.0+] #InitializeWlan
29	[7.0.0+] #FinalizeWlan
30	[8.0.0+]
31	[11.0.0+]
32	[11.0.0+]
33	[11.0.0+]
34	[11.0.0+]
35	[11.0.0+]
36	[11.0.0+]
37	[11.0.0+]
38	[13.0.0+]

[4.0.0+] Connect now takes an additional 4-bytes of input.

[5.0.0+] Cmd24 now returns a total of 0x58-bytes of output instead of 0x5C.

[7.0.0+] Input/output for cmds 27/28 were swapped, perhaps these cmds were swapped?

OpenMode

No input/output.

Sends command message 0x6 to the state machine.

CloseMode

No input/output.

Sends command message 0x5 to the state machine.

GetMacAddress

No input. Returns an output #MacAddress.

Sends command message 0x18 to the state machine.

StartScan

Takes a type-0x15 input buffer. No output.

Sends command messages 0xA and 0x14 to the state machine.

StopScan

No input/output.

Sends command message 0x16 to the state machine.

Connect

Takes an input #ConnectParam. No output.

Sends command messages 0xA, 0x13 and 0x20 to the state machine.

CancelConnect

No input/output.

Sends command message 0x23 to the state machine.

Disconnect

No input/output.

Sends command message 0x24 to the state machine.

GetSystemEvent

Takes an input u32 SystemEventType. Returns an output Event handle.

GetConnectionStatus

No input. Returns an output #ConnectionStatus.

GetState

No input. Returns an output #State.

Sends command message 0x80 to the state machine.

GetScanResult

Takes a type-0x6 output buffer containing a #ScanResult. No output.

Sends command message 0x15 to the state machine.

GetRssi

No input. Returns an output u32 Rssi.

Sends command message 0x2E to the state machine.

ChangeRxAntenna

Takes an input u32. No output.

Sends command message 0x30 to the state machine.

GetFwVersion

Takes a type-0xA output buffer containing a #FwVersion. No output.

Sends command message 0x32 to the state machine.

RequestSleep

No input/output.

Sends command message 0x33 to the state machine.

RequestWakeUp

No input/output.

Sends command messages 0x1, 0x80 and 0x81 to the state machine.

ConnectWithWps

Takes a type-0x9 input buffer containing a #WpsPin and two input u32s WpsMethod and BeaconLostTimeout. No output.

Sends command messages 0xA, 0x13 and 0x21 to the state machine.

Cmd19

Takes a total of 0x18-bytes of input, no output.

This copies the input data into state, and sets a flag in state.

This data is used during RequestSleep if a state field is set for using it (the codepath using this will throw an error if this data was not set). This data is cleared afterwards regardless of whether it was used. This is used for configuring various config related to wowl/tcpka/etc (wake-on-WLAN/TCP keep-alive). Note that an error is thrown if "wowl_activate" isn't set but sysmodule-side doesn't do so - this seems to be set automatically at some point.

This is used by nifm.

Cmd26

No input/output.

This sends a request which sets a global flag.

This flag is eventually checked by code which runs via RequestSleep, and in one case with wlan:dtc cmd19 (also used by requests done by nnMain).

Cmd27

Takes a type-0xA output buffer containing an array of 2-byte entries, returns an output u32 total_out.

This memcpys data from state into the output buffer, clamped to a maximum of 0x40 entries (nifm hard-codes the count to 0x26).

Cmd30

Takes an input s32, no output.

The input s32 must be <=0xE10 (3600) and >= -1. The input value is written into state, then this returns 0.

The user-process code using this cmd also has the above bounds check.

This cmd is used by nifm with a value from state, prior to using RequestSleep.

Cmd38

Takes an input u32 enum, no output.

The input value must be 0-1.

This internally sends a request which is then eventually handled (if the input doesn't match state already + other state fields are valid) by configuring "pm2_sleep_ret_ext" with a global struct selected via the input value. Afterwards another func is called with input value 2.

wlan:lcl

This is "nn::wlan::detail::ILocalManager".

Cmd	Name
0	OpenMasterMode
1	CloseMasterMode
2	OpenClientMode
3	CloseClientMode
4	OpenSpectatorMode
5	CloseSpectatorMode
6	GetMacAddress
7	CreateBss
8	DestroyBss
9	StartScan
10	StopScan
11	Connect
12	CancelConnect
13	Join
14	CancelJoin
15	Disconnect
16	SetBeaconLostCount
17	GetSystemEvent
18	GetConnectionStatus
19	GetClientStatus
20	GetBssIndicationEvent
21	GetBssIndicationInfo
22	GetState
23	GetAllowedChannels
24	AddIe
25	DeleteIe
26	PutFrameRaw
27	CancelGetFrame
28	CreateRxEntry
29	DeleteRxEntry
30	AddEthertypeToRxEntry
31	DeleteEthertypeFromRxEntry
32	AddMatchingDataToRxEntry
33	RemoveMatchingDataFromRxEntry
34	GetScanResult
35	PutActionFrameOneShot
36	SetActionFrameWithBeacon
37	CancelActionFrameWithBeacon
38	CreateRxEntryForActionFrame
39	DeleteRxEntryForActionFrame
40	AddSubtypeToRxEntryForActionFrame
41	DeleteSubtypeFromRxEntryForActionFrame
42	CancelGetActionFrame
43	GetRssi
44	SetMaxAssociationNumber
45	[4.0.0+]
46	[4.0.0+]
47	[4.0.0+]
48	[10.0.0+] ([4.0.0-8.1.0])
49	[6.0.0-8.1.0]
50	[6.0.0-8.1.0]
51	[8.0.0-8.1.0]
52	[8.0.0-8.1.0]
49	[13.0.0+]
50	[13.0.0+]
51	[13.0.0+]

[4.0.0+] CreateBss, Connect, and Join now takes an additional 4-bytes of input.

[5.0.0+] GetAllowedChannels now returns a total of 4-bytes of output instead of 0x50, and now takes a type-0xA output buffer.

[9.0.0+] Almost all cmds had input/output changed / cmds moved around (?).

[10.0.0+] Cmd46 now takes a total of 1-byte of input instead of 6-bytes, while cmd47 now takes a total of 6-bytes of input instead of 1-byte.

wlan:lg

This is "nn::wlan::detail::ILocalGetFrame".

Cmd	Name
0	GetFrameRaw

wlan:lga

This is "nn::wlan::detail::ILocalGetActionFrame".

Cmd	Name
0	GetActionFrame

[5.0.0+] Cmd0 now takes an additional 4-bytes of input, and returns an additional 4-bytes of output.

wlan:sg

This is "nn::wlan::detail::ISocketGetFrame".

Cmd	Name
0	GetFrameRaw

wlan:soc

This is "nn::wlan::detail::ISocketManager".

Cmd	Name
0	PutFrameRaw
1	CancelGetFrame
2	CreateRxEntry
3	DeleteRxEntry
4	AddEthertypeToRxEntry
5	DeleteEthertypeFromRxEntry
6	GetMacAddress
7	SwitchTsfTimerFunction
8	GetDeltaTimeBetweenSystemAndTsf
9	RegisterSharedMemory
10	UnregisterSharedMemory
11	EnableSharedMemory
12	[6.0.0+]

wlan:dtc

This is "nn::wlan::detail::IDetectManager".

This was added with [6.0.0+].

Cmd	Name
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

[7.0.0+] Cmd14 now takes an input u8.

Ssid

This is "nn::wlan::Ssid". This is a 0x20-byte struct.

MacAddress

This is a 0x6-byte struct with 1-byte alignment.

ConnectParam

This is a 0x80-byte struct.

Offset	Size	Description
0x0	0x20	Ssid
0x20	0x6	Bssid
0x26	0x2	Reserved
0x28	0x1
0x29	0x1	Reserved
0x2A	0x2	Channel
0x2C	0x4	PrivacyMode
0x30	0x4	GroupPrivacyMode
0x34	0x4	KeyIdx
0x38	0x40	SecurityKey
0x78	0x4	Reserved
0x7C	0x4	BeaconLostTimeout

ConnectionStatus

This is a 0x3C-byte struct.

Offset	Size	Description
0x0	0x4
0x4	0x4
0x8	0x2	Channel
0xA	0x6	AccessPoint MAC address
0x10	0x22	u8 SSID_len, then the SSID data.
0x32	0x2
0x34	0x2
0x36	0x2
0x38	0x2

ScanResult

Offset	Size	Description
0x0	0x4	ScanBufferCapacity
0x4	0x4	BssInfoSize
0x8	0x4	BssInfoCount
0xC	Variable	Array of #BssInfo

BssInfo

This is a 0x58-byte struct.

State

Value	Description
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

WpsPin

This is a 0x8-byte string.

FwVersion

This is a 0x100-byte string.

System Version	Firmware String
[1.0.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-aoe Version: 7.35.252.58 CRC: f592f3bf Date: Tue 2016-10-04 23:54:54 PDT Ucode Ver: 1020.221 FWID: 01-5ec2fbfd
[2.0.0-2.2.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe Version: 7.35.64.1 CRC: 301f7804 Date: Fri 2017-02-17 01:03:01 PST Ucode Ver: 1020.223 FWID: 01-82d1f902
[3.0.0-3.0.2]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.70 CRC: f3b554fd Date: Thu 2017-05-04 19:04:04 PDT Ucode Ver: 1020.223 FWID: 01-5d27fda5
[4.0.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.35.252.75 (r666384) CRC: 58f59a6f Date: Wed 2017-08-16 22:27:11 PDT Ucode Ver: 1020.223
[5.0.0-5.1.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe Version: 7.78.1.1 (r683984) CRC: 6a10caf9 Date: Wed 2018-02-21 21:43:01 PST Ucode Ver: 1020.223 FWID 01-ae4e196d
[6.0.0-6.2.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.84 (r692035) CRC: 937bcfc9 Date: Tue 2018-06-19 19:36:54 PDT Ucode Ver: 1020.225 FWID 01-71fd007e
[7.0.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.87 (r708450) CRC: 5f41af12 Date: Thu 2018-10-25 19:11:47 PDT Ucode Ver: 1020.226 FWID 01-377c0939
[8.0.0-8.1.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.90 (r711053) CRC: 30dcf8a5 Date: Thu 2019-02-28 18:12:24 PST Ucode Ver: 1020.226 FWID 01-e691490c
[9.0.0-9.1.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.93 (r717555) CRC: d8363dad Date: Mon 2019-07-01 23:43:14 PDT Ucode Ver: 1020.228 FWID 01-c90a462
[10.0.0-10.1.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.96 (r723441) CRC: f6823c05 Date: Tue 2019-11-19 22:31:29 PST Ucode Ver: 1020.228 FWID 01-a1b7e0a4
[11.0.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.99 (r725630) CRC: 320007b0 Date: Mon 2020-05-25 19:51:18 PDT Ucode Ver: 1020.228 FWID 01-822b442d
[12.0.0-13.0.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.104 (r728022) CRC: f0b454ec Date: Wed 2021-02-24 04:39:25 PST Ucode Ver: 1020.228 FWID 01-fbba058
[14.0.0]	4356a3-roml/pcie-ag-msgbuf-splitrx-pktctx-keepalive-sr-proptxstatus-ampduhostreorder-dlystat-rxdesens-clm_4356a3_ntd-noclminc-ntdds3-btcdyn-trfmgmt-pspretend-btafh-pktfilter-wowlpf-gtkoe-aoe-tcpkaoe-aloe Version: 7.35.252.108 (c216b7c) CRC: 1be69227 Date: Sun 2021-08-29 19:24:39 PDT Ucode Ver: 1020.228 FWID 01-65333037

• [2.0.0+] Besides the version update, added "gtkoe" to the string.
• [3.0.0+] Besides the version update, added "tcpkaoe" to the string.
• [6.0.0+] Besides the version update, added "clm_4356a3_ntd" to the string.
• [7.0.0+] Besides the version update, added "noclminc" to the string.