Nintendo Switch Brew

Filesystem services: Difference between revisions

← Older edit
No edit summary
No edit summary
 
(49 intermediate revisions by 6 users not shown)
Line 14: Line 14:


== OpenCodeFileSystem ==
== OpenCodeFileSystem ==
Takes an [[NCM_services#ProgramId|ProgramId]] and a [[#ContentPath]]. Returns an [[#IFileSystem]].
Takes a type-0x19 input buffer containing a [[#FspPath]] and an input [[NCM_services#ProgramId|ProgramId]]. Returns an [[#IFileSystem]].


[10.0.0+] This now takes an additional type-0x1A output buffer.
[10.0.0+] Now takes an additional type-0x1A output buffer.
 
[16.0.0+] Now takes an additional input [[#ContentAttributes]].
 
[17.0.0+] Now takes a type-0x6 output buffer instead of a type-0x1A output buffer.
 
[20.0.0+] Now no longer takes a type-0x19 input buffer containing a [[#FspPath]] and instead takes an input [[NCM_services#StorageId|StorageId]].


== IsArchivedProgram ==
== IsArchivedProgram ==
Takes an u64 ProcessId. Returns a bool (1 if the process id's [[#ContentPath]] ends in ".nca").
Takes an input u64 ProcessId. Returns a bool (1 if the process id's [[#FspPath]] ends in ".nca").


== SetCurrentProcess ==
== SetCurrentProcess ==
Takes a ProcessId descriptor.
Takes an input u64 ProcessId. No output.


= fsp-pr =
= fsp-pr =
Line 41: Line 47:


== RegisterProgram ==
== RegisterProgram ==
Takes a [[NCM_services#StorageId|StorageId]], an u64 ProcessId, a [[NCM_services#ProgramId|ProgramId]], a 0x1C type-A buffer for the [[NPDM#FS_Access_Header| FS Access Header]], and a 0x2C type-A buffer for the [[NPDM#FS_Access_Control| FS Access Control]]
Takes an input [[NCM_services#StorageId|StorageId]], an input u64 ProcessId, an input [[NCM_services#ProgramId|ProgramId]], a type-0x5 input buffer containing an [[NPDM#ACID|ACID]] [[NPDM#FsAccessControl|FsAccessControl]], and a type-0x5 input buffer containing an [[NPDM#ACI0|ACI0]] [[NPDM#FsAccessControl|FsAccessControl]].


Final FS permissions are stored as (ACI0_perms & ACID_perms). Will panic(svcBreak) when buffer sizes from ipc-rawdata are invalid.
Final FS permissions are stored as (ACI0_perms & ACID_perms). Will panic(svcBreak) when buffer sizes from ipc-rawdata are invalid.
[20.0.0+] Now takes an additional input [[#FsAccessControlRestrictionMode]].


== UnregisterProgram ==
== UnregisterProgram ==
Takes a pid. Removes registered FS permissions for that PID.
Takes an input u64 ProcessId. No output.
 
Removes registered FS permissions for that PID.


== SetEnabledProgramVerification ==
== SetEnabledProgramVerification ==
Seems to sets a global flag to inputval & 1.
Takes an input bool. No output.


When the flag is zero, it will set ret=0 instead of ret={error} when verifying the fixed-key [[NPDM]] ACID signature fails. This also skips verifying the [[NCA_Format|NCA Header]] signature using the ACID key. Note that if verifying the fixed-key ACID signature is successful, and verifying the ACID-key NCA header signature fails, it will throw an error and abort.
When the flag is zero, it will set ret=0 instead of ret={error} when verifying the fixed-key [[NPDM]] ACID signature fails. This also skips verifying the [[NCA_Format|NCA Header]] signature using the ACID key. Note that if verifying the fixed-key ACID signature is successful, and verifying the ACID-key NCA header signature fails, it will throw an error and abort.
Line 70: Line 80:
| 7 || [2.0.0+] [[#OpenFileSystemWithPatch]]
| 7 || [2.0.0+] [[#OpenFileSystemWithPatch]]
|-
|-
| 8 || [2.0.0+] [[#OpenFileSystemWithId]]
| 8 || [16.0.0+] [[#OpenFileSystemWithIdObsolete]] ([2.0.0-15.0.1] OpenFileSystemWithId)
|-
|-
| 9 || [3.0.0+] OpenDataFileSystemByProgramId
| 9 || [3.0.0+] OpenDataFileSystemByProgramId
|-
| 10 || [16.0.0+] [[#OpenFileSystemWithId]]
|-
|-
| 11 || [[#OpenBisFileSystem]]
| 11 || [[#OpenBisFileSystem]]
Line 101: Line 113:
|-
|-
| 28 || [4.0.0+] DeleteSaveDataFileSystemBySaveDataAttribute
| 28 || [4.0.0+] DeleteSaveDataFileSystemBySaveDataAttribute
|-
| 29 || [19.0.0+] IsInitializationMode
|-
|-
| 30 || [[#OpenGameCardStorage]]
| 30 || [[#OpenGameCardStorage]]
Line 115: Line 129:
|-
|-
| 36 || [9.0.0+] OpenHostFileSystemWithOption
| 36 || [9.0.0+] OpenHostFileSystemWithOption
|-
| 37 || [14.0.0+] CreateSaveDataFileSystemWithCreationInfo2
|-
| 38 || [20.0.0+] DetachSdCard
|-
|-
| 51 || [[#OpenSaveDataFileSystem]]
| 51 || [[#OpenSaveDataFileSystem]]
Line 164: Line 182:
| 86 || [10.0.0+] [[#OpenSaveDataMover]]
| 86 || [10.0.0+] [[#OpenSaveDataMover]]
|-
|-
| 87 || [11.0.0+] (Returns an [[#IUnknown]])
| 87 || [11.0.0+] [[#OpenSaveDataTransferManagerForRepair]]
|-
|-
| 100 || OpenImageDirectoryFileSystem
| 100 || OpenImageDirectoryFileSystem
|-
|-
| 101 || [11.0.0+]
| 101 || [11.0.0+] OpenBaseFileSystem
|-
| 102 || [12.0.0+] FormatBaseFileSystem
|-
|-
| 110 || [[#OpenContentStorageFileSystem]]
| 110 || [[#OpenContentStorageFileSystem]]
Line 187: Line 207:
|-
|-
| 205 || [7.0.0+] [[#OpenDataStorageWithProgramIndex]]
| 205 || [7.0.0+] [[#OpenDataStorageWithProgramIndex]]
|-
| 206 || [13.0.0+] OpenDataStorageByPath
|-
| 207 || [15.0.0+] OpenDataFileSystemByDataId
|-
|-
| 400 || [[#OpenDeviceOperator]]
| 400 || [[#OpenDeviceOperator]]
Line 193: Line 217:
|-
|-
| 501 || [[#OpenGameCardDetectionEventNotifier]]
| 501 || [[#OpenGameCardDetectionEventNotifier]]
|-
| 502 || [20.0.0+] OpenSdCardAwakenReadyEventNotifier
|-
| 503 || [19.0.0+] OpenGameCardAwakenReadyEventNotifier
|-
|-
| 510 || [5.0.0+] OpenSystemDataUpdateEventNotifier
| 510 || [5.0.0+] OpenSystemDataUpdateEventNotifier
Line 218: Line 246:
| 608 || [2.0.0+] UnregisterAllExternalKey
| 608 || [2.0.0+] UnregisterAllExternalKey
|-
|-
| 609 || [2.0.0+] GetRightsIdByPath
| 609 || [2.0.0-15.0.1] GetRightsIdByPath
|-
|-
| 610 || [3.0.0+] GetRightsIdAndKeyGenerationByPath
| 610 || [3.0.0+] GetRightsIdAndKeyGenerationByPath
Line 235: Line 263:
|-
|-
| 617 || [7.0.0+] UnregisterExternalKey
| 617 || [7.0.0+] UnregisterExternalKey
|-
| 618 || [17.0.0+] GetProgramId
|-
|-
| 620 || [2.0.0+] [[#SetSdCardEncryptionSeed]]
| 620 || [2.0.0+] [[#SetSdCardEncryptionSeed]]
Line 241: Line 271:
|-
|-
| 631 || [4.0.0+] IsSdCardAccessible
| 631 || [4.0.0+] IsSdCardAccessible
|-
| 632 || [19.0.0+] TestExternalKey
|-
|-
| 640 || [4.0.0-7.0.1] IsSignedSystemPartitionOnSdCardValid
| 640 || [4.0.0-7.0.1] IsSignedSystemPartitionOnSdCardValid
Line 257: Line 289:
|-
|-
| 810 || [7.0.0+] RegisterProgramIndexMapInfo
| 810 || [7.0.0+] RegisterProgramIndexMapInfo
|-
| 820 || [19.0.0+] GetContentStorageInfoIndex
|-
|-
| 1000 || [1.0.0-9.2.0] SetBisRootForHost
| 1000 || [1.0.0-9.2.0] SetBisRootForHost
Line 288: Line 322:
| 1014 || [10.0.0-10.2.0] OutputMultiProgramTagAccessLog
| 1014 || [10.0.0-10.2.0] OutputMultiProgramTagAccessLog
|-
|-
| 1016 || [11.0.0+]
| 1016 || [11.0.0+] FlushAccessLogOnSdCard
|-
|-
| 1017 || [11.0.0+]
| 1017 || [11.0.0+] OutputApplicationInfoAccessLog
|-
|-
| 1100 || [4.0.0+] OverrideSaveDataTransferTokenSignVerificationKey
| 1018 || [13.0.0+] SetDebugOption
|-
| 1019 || [13.0.0+] UnsetDebugOption
|-
| 1020 || [18.0.0+] OpenMemoryStressor
|-
| 1100 || [4.0.0-17.0.1] OverrideSaveDataTransferTokenSignVerificationKey
|-
| 1101 || [18.0.0+] OverrideSaveDataTransferKeyForTest
|-
|-
| 1110 || [6.0.0+] CorruptSaveDataFileSystemByOffset
| 1110 || [6.0.0+] CorruptSaveDataFileSystemByOffset
Line 299: Line 341:
|-
|-
| 1300 || [10.0.0+] [[#OpenBisWiper]]
| 1300 || [10.0.0+] [[#OpenBisWiper]]
|-
| 1400 || [15.0.0+] NotifyErrorContextServiceReady
|}
|}


Line 334: Line 378:
|-
|-
| 0x8 || CanMountImageAndVideoStorage ||0x8000000000001000 || RW || [[#OpenImageDirectoryFileSystem]]
| 0x8 || CanMountImageAndVideoStorage ||0x8000000000001000 || RW || [[#OpenImageDirectoryFileSystem]]
|-
| ([1.0.0-5.1.0] 0x9) || || 0x8000000000000084 || ||
|-
| ([6.0.0-9.2.0] 0x9) || CanMountCloudBackupWorkStorage || 0x8000000200000000 || RW || OpenCloudBackupWorkStorageFileSystem
|-
|-
| 0x9 || CanMountCustomStorage0 || 0x8000000000000000 || RW || OpenCustomStorageFileSystem
| 0x9 || CanMountCustomStorage0 || 0x8000000000000000 || RW || OpenCustomStorageFileSystem
|-
|-
| ([1.0.0-5.1.0] 0xA) || || 0x8000000000000080 || ||
| 0xA || CanMountBisCalibrationFile || 0x8000000000000084 || RW || [[#OpenBisFileSystem]]
|-
|-
| ([6.0.0-6.2.0] 0xA) || || 0x8000000000000084 || ||
| 0xB || CanMountBisSafeMode || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
|-
|-
| ([7.0.0-7.0.1] 0xA) || || 0x4000000000000000 || ||
| 0xC || CanMountBisUser || 0x8000000000008080 || RW || [[#OpenBisFileSystem]]
|-
|-
| ([8.0.0-9.2.0] 0xA) || || 0x8000000000000000 || ||
| 0xD || CanMountBisSystem || 0x8000000000008080 || RW || [[#OpenBisFileSystem]]
|-
|-
| 0xA || CanMountBisCalibrationFile || 0x8000000000000084 || RW || [[#OpenBisFileSystem]]
| 0xE || CanMountBisSystemProperEncryption || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
|-
|-
| ([1.0.0-5.1.0] 0xB) || || 0x8000000000008080 || ||
| 0xF || CanMountBisSystemProperPartition || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
|-
|-
| ([6.0.0-6.2.0] 0xB) || || 0x8000000000000080 || ||
| 0x10 || CanMountSdCard || 0xC000000000200000 || RW || [[#OpenSdCardFileSystem]]
|-
|-
| ([7.0.0-9.2.0] 0xB) || || 0x8000000000000084 || ||
| 0x11 || CanMountGameCard || 0x8000000000000010 || R- || [[#OpenGameCardFileSystem]]
|-
|-
| 0xB || CanMountBisSafeMode || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
| 0x12 || CanMountDeviceSaveData || 0x8000000000040020 || RW || [[#OpenSaveDataFileSystem]]
|-
|-
| ([1.0.0-6.2.0] 0xC) || || 0x8000000000008080 || ||
| 0x13 || CanMountSystemSaveData || 0x8000000000000028 || RW || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
|-
|-
| ([7.0.0-9.2.0] 0xC) || || 0x8000000000000080 || ||
| 0x14 || CanMountOthersSaveData || 0x8000000000000020 || RW || [[#OpenSaveDataFileSystem]]
|-
|-
| 0xC || CanMountBisUser || 0x8000000000008080 || RW || [[#OpenBisFileSystem]]
| 0x15 || CanMountOthersSystemSaveData || 0x8000000000000020 || RW || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
|-
|-
| ([1.0.0-5.1.0] 0xD) || || 0x8000000000000080 || ||
| 0x16 || CanOpenBisPartitionBootPartition1Root || 0x8000000000010082 || RW || [[#OpenBisStorage]]
|-
|-
| ([6.0.0-9.2.0] 0xD) || || 0x8000000000008080 || ||
| 0x17 || CanOpenBisPartitionBootPartition2Root || 0x8000000000010080 || RW || [[#OpenBisStorage]]
|-
|-
| 0xD || CanMountBisSystem || 0x8000000000008080 || RW || [[#OpenBisFileSystem]]
| 0x18 || CanOpenBisPartitionUserDataRoot || 0x8000000000000080 || RW || [[#OpenBisStorage]]
|-
|-
| ([1.0.0-2.3.0] 0xE) || || 0xC000000000200000 || ||
| 0x19 || CanOpenBisPartitionBootConfigAndPackage2Part1 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
|-
|-
| ([3.0.0-6.2.0] 0xE) || || 0x8000000000000080 || ||
| 0x1A || CanOpenBisPartitionBootConfigAndPackage2Part2 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
|-
|-
| ([7.0.0-9.2.0] 0xE) || || 0x8000000000008080 || ||
| 0x1B || CanOpenBisPartitionBootConfigAndPackage2Part3 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
|-
|-
| 0xE || CanMountBisSystemProperEncryption || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
| 0x1C || CanOpenBisPartitionBootConfigAndPackage2Part4 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
|-
|-
| ([1.0.0-2.3.0] 0xF) || || 0x8000000000000010 || ||
| 0x1D || CanOpenBisPartitionBootConfigAndPackage2Part5 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
|-
|-
| ([3.0.0-5.1.0] 0xF) || || 0xC000000000200000 || ||
| 0x1E || CanOpenBisPartitionBootConfigAndPackage2Part6 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
|-
|-
| ([6.0.0-9.2.0] 0xF) || || 0x8000000000000080 || ||
| 0x1F || CanOpenBisPartitionCalibrationBinary || 0x8000000000000084 || RW || [[#OpenBisStorage]]
|-
|-
| 0xF || CanMountBisSystemProperPartition || 0x8000000000000080 || RW || [[#OpenBisFileSystem]]
| 0x20 || CanOpenBisPartitionCalibrationFile || 0x8000000000000084 || RW || [[#OpenBisStorage]]
|-
|-
| ([1.0.0-2.3.0] 0x10) || || 0x8000000000040020 || ||
| 0x21 || CanOpenBisPartitionSafeMode || 0x8000000000000080 || RW || [[#OpenBisStorage]]
|-
|-
| ([3.0.0-5.1.0] 0x10) || || 0x8000000000000010 || ||
| 0x22 || CanOpenBisPartitionUser || 0x8000000000000080 || RW || [[#OpenBisStorage]]
|-
|-
| ([6.0.0-6.2.0] 0x10) || || 0xC000000000200000 || ||
| 0x23 || CanOpenBisPartitionSystem || 0x8000000000000080 || RW || [[#OpenBisStorage]]
|-
|-
| ([7.0.0-9.2.0] 0x10) || || 0x8000000000000080 || ||
| 0x24 || CanOpenBisPartitionSystemProperEncryption || 0x8000000000000080 || RW || [[#OpenBisStorage]]
|-
|-
| 0x10 || CanMountSdCard || 0xC000000000200000 || RW || [[#OpenSdCardFileSystem]]
| 0x25 || CanOpenBisPartitionSystemProperPartition || 0x8000000000000080 || RW || [[#OpenBisStorage]]
|-
|-
| ([1.0.0-2.3.0] 0x11) || || 0x8000000000000028 || ||
| 0x26 || CanOpenBisPartitionDeviceTreeBlob || 0x8000002000000080 || RW || [[#OpenBisStorage]]
|-
|-
| ([3.0.0-5.1.0] 0x11) || || 0x8000000000040020 || ||
| [3.0.0+] 0x27 || CanOpenSdCardStorage || 0xC000000000200000 || RW ||  
|-
|-
| ([6.0.0-6.2.0] 0x11) || || 0x8000000000000010 || ||
| [3.0.0+] 0x28 || CanOpenGameCardStorage || 0x8000000000000100 || RW || [[#OpenGameCardStorage]], [[#EraseGameCard]] (bit1), [[#WriteToGameCard]] (bit1), [[#GetGameCardErrorInfo]] (bit1), [[#EraseAndWriteParamDirectly]] (bit1), [[#ReadParamDirectly]] (bit1), [[#ForceEraseGameCard]] (bit1)
|-
|-
| ([7.0.0-9.2.0] 0x11) || || 0xC000000000200000 || ||
| [4.0.0+] 0x29 || CanMountSystemDataPrivate || 0x8000000000100008 || R- || [[#OpenFileSystem]], [[#OpenDataStorageByDataId]]
|-
|-
| 0x11 || CanMountGameCard || 0x8000000000000010 || R- || [[#OpenGameCardFileSystem]]
| [5.0.0+] 0x2A || CanMountHost || 0xC000000000400000 || RW || [[#OpenHostFileSystem]]
|-
|-
| ([1.0.0-2.3.0] 0x12) || || 0x8000000000000020 || ||
| [6.0.0+] 0x2B || CanMountRegisteredUpdatePartition || 0x8000000000010000 || R- || [[#OpenRegisteredUpdatePartition]]
|-
|-
| ([3.0.0-5.1.0] 0x12) || || 0x8000000000000028 || ||
| [7.0.0+] 0x2C || CanOpenSaveDataInternalStorage || [-19.0.0] 0x8000000000000000 [20.0.0+] 0x8000000000000020 || RW || [[#OpenSaveDataInternalStorageFileSystem]]
|-
|-
| ([6.0.0-6.2.0] 0x12) || || 0x8000000000040020 || ||
| [7.0.0+] 0x2D || CanMountTemporaryDirectory || 0xC000000000000000 || RW ||  
|-
|-
| ([7.0.0-9.2.0] 0x12) || || 0x8000000000000010 || ||
| [11.0.0+] 0x2E || CanMountAllBaseFilesystem || 0x8000000000000000 || RW || OpenBaseFileSystem
|-
|-
| 0x12 || CanMountDeviceSaveData || 0x8000000000040020 || RW || [[#OpenSaveDataFileSystem]]
| [15.0.0+] 0x2F || CanNotMount || 0x0000000000000000 || -- || OpenCustomStorageFileSystem
|}
 
=== Call ===
{| class="wikitable" border="1"
|-
|-
| ([1.0.0-5.1.0] 0x13) || || 0x8000000000000020 || ||
! OperationType || Name || Mask || Used by
|-
|-
| ([6.0.0-6.2.0] 0x13) || || 0x8000000000000028 || ||
| 0x0 || CanInvalidateBisCache || 0x8000000000000080 || [[#InvalidateBisCache]]
|-
|-
| ([7.0.0-9.2.0] 0x13) || || 0x8000000000040020 || ||
| 0x1 || CanEraseMmc || 0x8000000000000080 || EraseMmc
|-
|-
| 0x13 || CanMountSystemSaveData || 0x8000000000000028 || RW || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
| [20.0.0+] 0x2 || || 0x8000100000000080 ||
|-
| [-19.0.0] 0x2 [20.0.0+] 0x3 || CanGetGameCardDeviceCertificate || 0x8000000000000010 || GetGameCardDeviceCertificate
|-
|-
| ([1.0.0-2.3.0] 0x14) || || 0x8000000000010082 || ||
| [-19.0.0] 0x3 [20.0.0+] 0x4 || CanGetGameCardIdSet || 0x8000000000000010 || GetGameCardIdSet
|-
|-
| ([3.0.0-6.2.0] 0x14) || || 0x8000000000000020 || ||
| [-19.0.0] 0x4 [20.0.0+] 0x5 || CanFinalizeGameCardDriver || 0x8000000000000200 || FinalizeGameCardDriver
|-
|-
| ([7.0.0-9.2.0] 0x14) || || 0x8000000000000028 || ||
| [-19.0.0] 0x5 [20.0.0+] 0x6 || CanGetGameCardAsicInfo || 0x8000000000000200 || GetGameCardAsicInfo
|-
|-
| 0x14 || CanMountOthersSaveData || 0x8000000000000020 || RW || [[#OpenSaveDataFileSystem]]
| [-19.0.0] 0x6 [20.0.0+] 0x7 || CanGetGameCardAsicCertificate || 0x8000000000000200 || GetGameCardAsicCertificate
|-
|-
| ([1.0.0-2.3.0] 0x15) || || 0x8000000000010080 || ||
| [20.0.0+] 0x8 || || 0x8000100000000080 ||
|-
|-
| ([3.0.0-5.1.0] 0x15) || || 0x8000000000010082 || ||
| [20.0.0+] 0x9 || || 0x8000100000000080 ||
|-
|-
| ([6.0.0-9.2.0] 0x15) || || 0x8000000000000020 || ||
| [20.0.0+] 0xA || || 0x8000080000000000 ||
|-
|-
| 0x15 || CanMountOthersSystemSaveData || 0x8000000000000020 || RW || [[#OpenSaveDataFileSystemBySystemSaveDataId]]
| [20.0.0+] 0xB || || 0x8000000000000010 ||
|-
|-
| ([1.0.0-5.1.0] 0x16) || || 0x8000000000010080 || ||
| [20.0.0+] 0xC || || 0x8000100000000080 ||
|-
|-
| ([6.0.0-6.2.0] 0x16) || || 0x8000000000010082 || ||
| [-19.0.0] 0x7 [20.0.0+] 0xD || CanCreateSaveData || 0x8000000000002020 || [[#CreateSaveDataFileSystem]]
|-
|-
| ([7.0.0-9.2.0] 0x16) || || 0x8000000000000020 || ||
| [-19.0.0] 0x8 [20.0.0+] 0xE || CanDeleteSaveData || 0x8000000000000060 || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
|-
|-
| 0x16 || CanOpenBisPartitionBootPartition1Root || 0x8000000000010082 || RW || [[#OpenBisStorage]]
| [-19.0.0] 0x9 [20.0.0+] 0xF || CanCreateSystemSaveData || 0x8000000000000028 || CreateSaveDataFileSystemBySystemSaveDataId
|-
|-
| ([1.0.0-2.3.0] 0x17) || || 0x8000000000010080 || ||
| [-19.0.0] 0xA [20.0.0+] 0x10 || CanCreateOthersSystemSaveData || 0x8000000000000020 || CreateSaveDataFileSystemBySystemSaveDataId
|-
|-
| ([3.0.0-5.1.0] 0x17) || || 0x8000000000000080 || ||
| [-19.0.0] 0xB [20.0.0+] 0x11 || CanDeleteSystemSaveData || 0x8000000000004028 || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
|-
|-
| ([6.0.0-6.2.0] 0x17) || || 0x8000000000010080 || ||
| [-19.0.0] 0xC [20.0.0+] 0x12 || CanOpenSaveDataInfoReader || 0x8000000000000060 || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
|-
|-
| ([7.0.0-9.2.0] 0x17) || || 0x8000000000010082 || ||
| [-19.0.0] 0xD [20.0.0+] 0x13 || CanOpenSaveDataInfoReaderForSystem || 0x8000000000004020 || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
|-
|-
| 0x17 || CanOpenBisPartitionBootPartition2Root || 0x8000000000010080 || RW || [[#OpenBisStorage]]
| [-19.0.0] 0xE [20.0.0+] 0x14 || CanOpenSaveDataInfoReaderForInternal || 0x8000000000000040 || [[#OpenSaveDataInfoReaderWithFilter]]
|-
|-
| ([1.0.0-5.1.0] 0x18) || || 0x8000000000010080 || ||
| [-19.0.0] 0xF [20.0.0+] 0x15 || CanOpenSaveDataMetaFile || 0x8000000000020000 || OpenSaveDataMetaFile
|-
|-
| ([6.0.0-6.2.0] 0x18) || || 0x8000000000000080 || ||
| [-19.0.0] 0x10 [20.0.0+] 0x16 || CanSetCurrentPosixTime || 0x8000000000000400 || SetCurrentPosixTime, SetCurrentPosixTimeWithTimeDifference
|-
|-
| ([7.0.0-9.2.0] 0x18) || || 0x8000000000010080 || ||
| [-19.0.0] 0x11 [20.0.0+] 0x17 || CanReadSaveDataFileSystemExtraData || 0x8000000000004060 || [[#ReadSaveDataFileSystemExtraData]]
|-
|-
| 0x18 || CanOpenBisPartitionUserDataRoot || 0x8000000000000080 || RW || [[#OpenBisStorage]]
| [-19.0.0] 0x12 [20.0.0+] 0x18 || CanSetGlobalAccessLogMode || 0x8000000000080000 || [[#SetGlobalAccessLogMode]]
|-
|-
| ([6.0.0-6.2.0] 0x19) || || 0x8000000000010080 || ||
| [-19.0.0] 0x13 [20.0.0+] 0x19 || CanSetSpeedEmulationMode || 0x8000000000080000 || SetSpeedEmulationMode
|-
|-
| ([7.0.0-9.2.0] 0x19) || || 0x8000000000000080 || ||
| [20.0.0+] 0x1A || || 0x8000000400080000 ||
|-
|-
| 0x19 || CanOpenBisPartitionBootConfigAndPackage2Part1 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
| [20.0.0+] 0x1B || || 0x8000000400080000 ||
|-
|-
| ([1.0.0-9.2.0] 0x1A) || || 0x8000000000010080 || ||
| [-19.0.0] 0x14 [20.0.0+] 0x1C || CanDebug || 0xC000000000000000 ||  
|-
|-
| 0x1A || CanOpenBisPartitionBootConfigAndPackage2Part2 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
| [-19.0.0] 0x15 [20.0.0+] 0x1D || CanFillBis || 0xC000000000800000 || CreatePaddingFile, DeleteAllPaddingFiles
|-
|-
| ([1.0.0-9.2.0] 0x1B) || || 0x8000000000010080 || ||
| [2.0.0-19.0.0] 0x16 [20.0.0+] 0x1E || CanCorruptSaveData || 0xC000000001000000 || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
|-
|-
| 0x1B || CanOpenBisPartitionBootConfigAndPackage2Part3 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
| [2.0.0-19.0.0] 0x17 [20.0.0+] 0x1F || CanCorruptSystemSaveData || 0x8000000001000060 || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
|-
|-
| ([1.0.0-9.2.0] 0x1C) || || 0x8000000000010080 || ||  
| [2.0.0-19.0.0] 0x18 [20.0.0+] 0x20 || CanVerifySaveData || 0x8000000000000060 || [[#VerifySaveDataFileSystem]], VerifySaveDataFileSystemBySaveDataSpaceId
|-
|-
| 0x1C || CanOpenBisPartitionBootConfigAndPackage2Part4 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
| [2.0.0-19.0.0] 0x19 [20.0.0+] 0x21 || CanDebugSaveData || 0xC000000002000000 || [[#CreateSaveDataFileSystem]], [[#OpenSaveDataFileSystem]], [[#SetSaveDataRootPath]]
|-
|-
| ([1.0.0-2.3.0] 0x1D) || || 0x8000000000000084 || ||
| [2.0.0-19.0.0] 0x1A [20.0.0+] 0x22 || CanFormatSdCard || 0x8000000004000000 || FormatSdCardFileSystem
|-
|-
| ([3.0.0-9.2.0] 0x1D) || || 0x8000000000010080 || ||
| [3.0.0-19.0.0] 0x1B [20.0.0+] 0x23 || CanGetRightsId || 0x8000000008000000 || GetRightsId, GetRightsIdAndKeyGenerationByPath, GetRightsIdByPath
|-
|-
| 0x1D || CanOpenBisPartitionBootConfigAndPackage2Part5 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
| [3.0.0-19.0.0] 0x1C [20.0.0+] 0x24 || CanRegisterExternalKey || 0x8000000010000000 || RegisterExternalKey, UnregisterAllExternalKey
|-
|-
| ([1.0.0-5.1.0] 0x1E) || || 0x8000000000000084 || ||
| [4.0.0-19.0.0] 0x1D [20.0.0+] 0x25 || CanSetEncryptionSeed || 0x8000000000000800 || [[#SetSdCardEncryptionSeed]]
|-
|-
| ([6.0.0-9.2.0] 0x1E) || || 0x8000000000010080 || ||
| [4.0.0-19.0.0] 0x1E [20.0.0+] 0x26 || CanWriteSaveDataFileSystemExtraDataTimeStamp || 0x8000000000000020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
|-
|-
| 0x1E || CanOpenBisPartitionBootConfigAndPackage2Part6 || 0x8000000000010080 || RW || [[#OpenBisStorage]]
| [4.0.0-19.0.0] 0x1F [20.0.0+] 0x27 || CanWriteSaveDataFileSystemExtraDataFlags || 0x8000000000004020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
|-
|-
| ([1.0.0-5.1.0] 0x1F) || || 0x8000000000000080 || ||
| [4.0.0-19.0.0] 0x20 [20.0.0+] 0x28 || CanWriteSaveDataFileSystemExtraDataCommitId || 0x8000000000000020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
|-
|-
| ([6.0.0-6.2.0] 0x1F) || || 0x8000000000000084 || ||
| [5.0.0-19.0.0] 0x21 [20.0.0+] 0x29 || CanWriteSaveDataFileSystemExtraDataAll || 0x8000000000000000 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
|-
|-
| ([7.0.0-9.2.0] 0x1F) || || 0x8000000000010080 || ||
| [5.0.0-19.0.0] 0x22 [20.0.0+] 0x2A || CanExtendSaveData || 0x8000000000002020 || ExtendSaveDataFileSystem
|-
|-
| 0x1F || CanOpenBisPartitionCalibrationBinary || 0x8000000000000084 || RW || [[#OpenBisStorage]]
| [5.0.0-19.0.0] 0x23 [20.0.0+] 0x2B || CanExtendSystemSaveData || 0x8000000000000028 || ExtendSaveDataFileSystem
|-
|-
| ([1.0.0-5.1.0] 0x20) || || 0x8000000000000080 || ||
| [5.0.0-19.0.0] 0x24 [20.0.0+] 0x2C || CanExtendOthersSystemSaveData || 0x8000000000000020 || ExtendSaveDataFileSystem
|-
|-
| ([6.0.0-9.2.0] 0x20) || || 0x8000000000000084 || ||
| [5.0.0-19.0.0] 0x25 [20.0.0+] 0x2D || CanRegisterUpdatePartition || 0x8000000020000000 || RegisterUpdatePartition
|-
|-
| 0x20 || CanOpenBisPartitionCalibrationFile || 0x8000000000000084 || RW || [[#OpenBisStorage]]
| [5.0.0-19.0.0] 0x26 [20.0.0+] 0x2E || CanOpenSaveDataTransferManager || 0x8000000040000000 || [[#OpenSaveDataTransferManager]]
|-
|-
| ([6.0.0-6.2.0] 0x21) || || 0x8000000000000080 || ||
| [5.0.0-19.0.0] 0x27 [20.0.0+] 0x2F || CanOpenSaveDataTransferManagerVersion2 || 0x8000000200000000 || [[#OpenSaveDataTransferManagerVersion2]]
|-
|-
| ([7.0.0-9.2.0] 0x21) || || 0x8000000000000084 || ||
| [5.0.0-19.0.0] 0x28 [20.0.0+] 0x30 || CanOpenSaveDataTransferManagerForSaveDataRepair || 0x8000000200000000 || OpenSaveDataTransferManagerForSaveDataRepair
|-
|-
| 0x21 || CanOpenBisPartitionSafeMode || 0x8000000000000080 || RW || [[#OpenBisStorage]]
| [5.0.0-19.0.0] 0x29 [20.0.0+] 0x31 || CanOpenSaveDataTransferManagerForSaveDataRepairTool || 0x8000000000000000 || OpenSaveDataTransferManagerForSaveDataRepair
|-
|-
| ([1.0.0-9.2.0] 0x22) || || 0x8000000000000080 || ||
| [5.0.0-19.0.0] 0x2A [20.0.0+] 0x32 || CanOpenOpenSaveDataTransferProhibiter || 0x8000000200002000 || [[#OpenSaveDataTransferProhibiter]]
|-
|-
| 0x22 || CanOpenBisPartitionUser || 0x8000000000000080 || RW || [[#OpenBisStorage]]
| [5.0.0-19.0.0] 0x2B [20.0.0+] 0x33 || CanOpenSaveDataMover || 0x8000001000000000 || [[#OpenSaveDataMover]]
|-
|-
| ([1.0.0-2.3.0] 0x23) || || 0xC000000000200000 || ||
| [5.0.0-19.0.0] 0x2C [20.0.0+] 0x34 || CanOpenBisWiper || 0x8000000000000800 || [[#OpenBisWiper]]
|-
|-
| ([3.0.0-9.2.0] 0x23) || || 0x8000000000000080 || ||
| [5.0.0-19.0.0] 0x2D [20.0.0+] 0x35 || CanListAccessibleSaveDataOwnerId || 0x8000000240002000 || [[#ListAccessibleSaveDataOwnerId]]
|-
|-
| 0x23 || CanOpenBisPartitionSystem || 0x8000000000000080 || RW || [[#OpenBisStorage]]
| [5.0.0-19.0.0] 0x2E [20.0.0+] 0x36 || CanControlMmcPatrol || 0x8000000000000000 || SuspendMmcPatrol, ResumeMmcPatrol
|-
|-
| ([1.0.0-2.3.0] 0x24) || || 0x8000000000000100 || ||
| [5.0.0-19.0.0] 0x2F [20.0.0+] 0x37 || CanOverrideSaveDataTransferTokenSignVerificationKey || 0x8000000000000000 || OverrideSaveDataTransferTokenSignVerificationKey
|-
|-
| ([3.0.0-9.2.0] 0x24) || || 0x8000000000000080 || ||
| [5.1.0-19.0.0] 0x30 [20.0.0+] 0x38 || CanOpenSdCardDetectionEventNotifier || 0x8000000080200000 || [[#OpenSdCardDetectionEventNotifier]]
|-
|-
| 0x24 || CanOpenBisPartitionSystemProperEncryption || 0x8000000000000080 || RW || [[#OpenBisStorage]]
| [20.0.0+] 0x39 || || 0x8000000000200000 ||
|-
|-
| ([1.0.0-2.3.0] 0x25) || || 0x8000000000100008 || ||
| [6.0.0-19.0.0] 0x31 [20.0.0+] 0x3A || CanOpenGameCardDetectionEventNotifier || 0x8000000080000110 || [[#OpenGameCardDetectionEventNotifier]]
|-
|-
| ([3.0.0-5.1.0] 0x25) || || 0xC000000000200000 || ||
| [20.0.0+] 0x3B || CanOpenGameCardAwakenReadyEventNotifier || 0x8000000080000110 || OpenGameCardAwakenReadyEventNotifier
|-
|-
| ([6.0.0-9.2.0] 0x25) || || 0x8000000000000080 || ||
| [6.0.0-19.0.0] 0x32 [20.0.0+] 0x3C || CanOpenSystemDataUpdateEventNotifier || 0x8000000000100008 || OpenSystemDataUpdateEventNotifier
|-
|-
| 0x25 || CanOpenBisPartitionSystemProperPartition || 0x8000000000000080 || RW || [[#OpenBisStorage]]
| [6.0.0-19.0.0] 0x33 [20.0.0+] 0x3D || CanNotifySystemDataUpdateEvent || 0x8000000000010000 || NotifySystemDataUpdateEvent
|-
|-
| ([1.0.0-2.3.0] 0x26) || || 0xC000000000400000 || ||
| [6.0.0-19.0.0] 0x34 [20.0.0+] 0x3E || CanOpenAccessFailureDetectionEventNotifier || 0x8000000100000000 || [[#OpenAccessFailureDetectionEventNotifier]]
|-
|-
| ([3.0.0-5.1.0] 0x26) || || 0x8000000000000100 || ||
| [6.0.0-19.0.0] 0x35 [20.0.0+] 0x3F || CanGetAccessFailureDetectionEvent || 0x8000000100000000 || GetAccessFailureDetectionEvent
|-
|-
| ([6.0.0-6.2.0] 0x26) || || 0xC000000000200000 || ||
| [6.0.0-19.0.0] 0x36 [20.0.0+] 0x40 || CanIsAccessFailureDetected || 0x8000000100000000 || IsAccessFailureDetected
|-
|-
| ([7.0.0-9.2.0] 0x26) || || 0x8000000000000080 || ||
| [6.0.0-19.0.0] 0x37 [20.0.0+] 0x41 || CanResolveAccessFailure || 0x8000000100000000 || ResolveAccessFailure
|-
|-
| 0x26 || CanOpenSdCardStorage || 0xC000000000200000 || RW ||  
| [6.0.0-19.0.0] 0x38 [20.0.0+] 0x42 || CanAbandonAccessFailure || 0x8000000100000000 || AbandonAccessFailure
|-
|-
| ([3.0.0-5.1.0] 0x27) || || 0x8000000000100008 || ||
| [8.0.0-19.0.0] 0x39 [20.0.0+] 0x43 || CanQuerySaveDataInternalStorageTotalSize || 0x8000000040000000 || QuerySaveDataInternalStorageTotalSize
|-
|-
| ([6.0.0-6.2.0] 0x27) || || 0x8000000000000100 || ||
| [9.0.0-19.0.0] 0x3A [20.0.0+] 0x44 || CanGetSaveDataCommitId || 0x8000000200000020 || [[#GetSaveDataCommitId]]
|-
|-
| ([7.0.0-9.2.0] 0x27) || || 0xC000000000200000 || ||  
| [20.0.0+] 0x45 ||   || 0x8000000000200000 ||
|-
|-
| [3.0.0+] 0x27 || CanOpenGameCardStorage || 0x8000000000000100 || RW || [[#OpenGameCardStorage]], [[#EraseGameCard]] (bit1), [[#WriteToGameCard]] (bit1), [[#GetGameCardErrorInfo]] (bit1), [[#EraseAndWriteParamDirectly]] (bit1), [[#ReadParamDirectly]] (bit1), [[#ForceEraseGameCard]] (bit1)
| [9.0.0-19.0.0] 0x3B [20.0.0+] 0x46 || CanSetSdCardAccessibility || 0x8000000000200000 || SetSdCardAccessibility
|-
|-
| ([3.0.0-5.1.0] 0x28) || || 0xC000000000400000 || ||
| [9.0.0-19.0.0] 0x3C [20.0.0+] 0x47 || CanSimulateDevice || 0x4000000000000000 || SimulateDeviceDetectionEvent, SetSimulationEvent, ClearSimulationEvent
|-
|-
| ([6.0.0-6.2.0] 0x28) || || 0x8000000000100008 || ||
| [9.0.0-19.0.0] 0x3D [20.0.0+] 0x48 || CanCreateSaveDataWithHashSalt || 0x8000000000000000 || [[#CreateSaveDataFileSystem]], [[#CreateSaveDataFileSystemWithHashSalt]]
|-
|-
| ([7.0.0-9.2.0] 0x28) || || 0x8000000000000100 || ||
| [9.0.0-19.0.0] 0x3E [20.0.0+] 0x49 || CanRegisterProgramIndexMapInfo || 0x8000000400000000 || RegisterProgramIndexMapInfo
|-
|-
| [3.0.0+] 0x28 || CanMountSystemDataPrivate || 0x8000000000100008 || R- || [[#OpenFileSystem]], [[#OpenDataStorageByDataId]]
| [9.0.0-19.0.0] 0x3F [20.0.0+] 0x4A || CanChallengeCardExistence || 0x8000000000000010 || ChallengeCardExistence
|-
|-
| ([4.0.0-5.1.0] 0x29) || || 0x8000000000010000 || ||
| [9.0.0-19.0.0] 0x40 [20.0.0+] 0x4B || CanCreateOwnSaveData || 0x8000000800000000 || [[#CreateSaveDataFileSystem]], CreateSaveDataFileSystemWithHashSalt
|-
|-
| ([6.0.0-6.2.0] 0x29) || || 0xC000000000400000 || ||
| [9.0.0-19.0.0] 0x41 [20.0.0+] 0x4C || CanDeleteOwnSaveData || 0x8000000800000000 || [[#DeleteSaveDataFileSystem]]
|-
|-
| ([7.0.0-9.2.0] 0x29) || || 0x8000000000100008 || ||
| [10.0.0-19.0.0] 0x42 [20.0.0+] 0x4D || CanReadOwnSaveDataFileSystemExtraData || 0x8000000800000000 || [[#ReadSaveDataFileSystemExtraData]]
|-
|-
| [4.0.0+] 0x29 || CanMountHost || 0xC000000000400000 || RW || [[#OpenHostFileSystem]]
| [10.0.0-19.0.0] 0x43 [20.0.0+] 0x4E || CanExtendOwnSaveData || 0x8000000800000000 || ExtendSaveDataFileSystem
|-
|-
| ([5.0.0-5.1.0] 0x2A) || || 0x8000000000000000 || ||
| [10.2.0-19.0.0] 0x44 [20.0.0+] 0x4F || CanOpenOwnSaveDataTransferProhibiter || 0x8000000800000000 || [[#OpenSaveDataTransferProhibiter]]
|-
|-
| ([6.0.0-6.2.0] 0x2A) || || 0x8000000000010000 || ||
| [11.0.0-19.0.0] 0x45 [20.0.0+] 0x50 || CanFindOwnSaveDataWithFilter || 0x8000000800000000 || [[#FindSaveDataWithFilter]]
|-
|-
| ([7.0.0-9.2.0] 0x2A) || || 0xC000000000400000 || ||
| [13.0.0-19.0.0] 0x46 [20.0.0+] 0x51 || CanOpenSaveDataTransferManagerForRepair || 0x8000000000000020 || [[#OpenSaveDataTransferManagerForRepair]]
|-
|-
| [5.0.0+] 0x2A || CanMountRegisteredUpdatePartition || 0x8000000000010000 || R- || [[#OpenRegisteredUpdatePartition]]
| [13.0.0-19.0.0] 0x47 [20.0.0+] 0x52 || CanSetDebugConfiguration || 0x8000000000000000 || SetDebugOption, UnsetDebugOption
|-
|-
| ([6.0.0-6.2.0] 0x2B) || || 0x8000000000000000 || ||
| [15.0.0-19.0.0] 0x48 [20.0.0+] 0x53 || CanOpenDataStorageByPath || 0x8000000000000000 || OpenDataStorageByPath
|-
|-
| ([7.0.0-9.2.0] 0x2B) || || 0x8000000000010000 || ||  
| [17.0.0-19.0.0] 0x49 [20.0.0+] 0x54|| CanNotifyErrorContextServiceReady || 0x8000004000000000 || NotifyErrorContextServiceReady
|-
|-
| [6.0.0+] 0x2B || CanOpenSaveDataInternalStorage || 0x8000000000000000 || RW || [[#OpenSaveDataInternalStorageFileSystem]]
| [17.0.0-19.0.0] 0x4A || CanGetProgramId || 0x8000000008000000 || GetProgramId, Removed in 20.0.0
|-
|-
| ([7.0.0-9.2.0] 0x2C) || || 0x8000000000000000 || ||
| [20.0.0+] 0x55 || || 0x8000000000000800 ||
|-
|-
| [7.0.0+] 0x2C || CanNotMount || 0x0000000000000000 || -- || OpenCustomStorageFileSystem
| [20.0.0+] 0x56 || || 0x8000000004000000 ||
|-
|-
| ([7.0.0-9.2.0] 0x2D) || || 0x0000000000000000 || ||
| [20.0.0+] 0x57 || || 0x8000000004000000 ||
|}
|}


=== Call ===
== OpenFileSystem ==
{| class="wikitable" border="1"
Takes a type-0x19 input buffer containing a [[#FspPath]] and an input [[#FileSystemProxyType]]. Returns an [[#IFileSystem]].
|-
 
! OperationType || Name || Mask || Used by
[2.0.0+] This function was removed.
|-
 
| 0x0 || CanInvalidateBisCache || 0x8000000000000080 || [[#InvalidateBisCache]]
== SetCurrentProcess ==
|-
Takes an input u64 ProcessId. No output.
| 0x1 || CanEraseMmc || 0x8000000000000080 || EraseMmc
 
|-
== OpenFileSystemWithPatch ==
| 0x2 || CanGetGameCardDeviceCertificate || 0x8000000000000010 || GetGameCardDeviceCertificate
Takes an input [[#FileSystemProxyType]] and an input [[NCM_services#ProgramId|ProgramId]]. Returns an [[#IFileSystem]].
|-
 
| 0x3 || CanGetGameCardIdSet || 0x8000000000000010 || GetGameCardIdSet
Web-applet loads the [[#FileSystemProxyType]] (which must be '''Manual''') from u32_table[inparam].
|-
 
| 0x4 || CanFinalizeGameCardDriver || 0x8000000000000200 || FinalizeGameCardDriver
Note: web-applet strings refer to both this cmd and [[#OpenFileSystemWithId]] as "MountContent", but official nn_sf_sync symbols use "OpenXX" names.
|-
 
| 0x5 || CanGetGameCardAsicInfo || 0x8000000000000200 || GetGameCardAsicInfo
== OpenFileSystemWithIdObsolete ==
|-
Takes a type-0x19 input buffer containing a [[#FspPath]], an input [[#FileSystemProxyType]] and an input [[NCM_services#ProgramId|ProgramId]]. Returns an [[#IFileSystem]].
| 0x6 || CanCreateSaveData || 0x8000000000002020 || [[#CreateSaveDataFileSystem]]
 
|-
The [[#IFileSystem]] must be '''Meta''' if the NCA type is 0.
| 0x7 || CanDeleteSaveData || 0x8000000000000060 || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
 
|-
The input buffer is the output string path from [[NS_Services#GetApplicationContentPath|GetApplicationContentPath]].
| 0x8 || CanCreateSystemSaveData || 0x8000000000000028 || CreateSaveDataFileSystemBySystemSaveDataId
 
|-
May return errors when attempting to access NCA-paths for an update-title with a gamecard, when the gamecard isn't inserted. May return error 0x7D402 in some cases with update-titles. Non-val2 in32 values with NCA-type1 are unusable, even for normal titles.
| 0x9 || CanCreateOthersSystemSaveData || 0x8000000000000020 || CreateSaveDataFileSystemBySystemSaveDataId
 
|-
The official "MountApplicationPackage" func uses this with in64=0 and [[#FileSystemProxyType]] '''Package'''.
| 0xA || CanDeleteSystemSaveData || 0x8000000000004028 || [[#DeleteSaveDataFileSystem]], RegisterSaveDataFileSystemAtomicDeletion
 
|-
After the [[#FileSystemProxyType]] specific permissions are checked, it then gets the func retval for permissions-type 0x25 and func0.
| 0xB || CanOpenSaveDataInfoReader || 0x8000000000000060 || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
 
|-
When [[#FileSystemProxyType]] is '''Meta''', it uses in64=0xffffffffffffffff internally, otherwise it checks if in64 is set to 0xffffffffffffffff then throws an error if so. When the in64 used internally is not 0xffffffffffffffff, it's compared with the NCA [[NCM_services#ProgramId|ProgramId]], then an error is thrown on mismatch.
| 0xC || CanOpenSaveDataInfoReaderForSystem || 0x8000000000004020 || [[#OpenSaveDataInfoReaderBySaveDataSpaceId]], [[#OpenSaveDataInfoReader]]
 
|-
== OpenFileSystemWithId ==
| ([1.0.0-5.1.0] 0xD) || || 0x8000000000020000 ||
Takes a type-0x19 input buffer containing a [[#FspPath]], an input [[#ContentAttributes]], an input [[#FileSystemProxyType]] and an input [[NCM_services#ProgramId|ProgramId]]. Returns an [[#IFileSystem]].
|-
 
| 0xD || CanOpenSaveDataInfoReaderForInternal || 0x8000000000000040 || [[#OpenSaveDataInfoReaderWithFilter]]
== OpenBisFileSystem ==
|-
Takes a type-0x19 input buffer containing a [[#FspPath]] and an input [[#BisPartitionId]]. Returns an [[#IFileSystem]].
| ([1.0.0-5.1.0] 0xE) || || 0x8000000000000400 ||
 
|-
Official user-process code sets instr[0] = 0 normally.
| 0xE || CanOpenSaveDataMetaFile || 0x8000000000020000 || OpenSaveDataMetaFile
 
|-
Only partitionIDs for FAT partitions are usable with this, otherwise error 0x2EE202 is returned. Seems to be about the same as [[#OpenBisStorage]] except this mounts the partition filesystem instead of allowing direct access to the partition sectors.
| ([1.0.0-5.1.0] 0xF) || || 0x8000000000004060 ||
 
|-
== OpenBisStorage ==
| 0xF || CanSetCurrentPosixTime || 0x8000000000000400 || SetCurrentPosixTime, SetCurrentPosixTimeWithTimeDifference
Takes a u32 partition ID, returns 0x2EE202 for partitions which do not exist, 0x320002 for partitions which cannot be opened and a valid [[#IStorage]] handle otherwise.
|-
 
| ([1.0.0-5.1.0] 0x10) || || 0x8000000000080000 ||
== InvalidateBisCache ==
|-
Seems to invalidate the Bis cache for MBR/GPT after overwriting that data via the OpenBisStorage IStorage. Used by [[SystemInitializer]].
| 0x10 || CanReadSaveDataFileSystemExtraData || 0x8000000000004060 || [[#ReadSaveDataFileSystemExtraData]]
 
|-
== DeleteSaveDataFileSystem ==
| 0x11 || CanSetGlobalAccessLogMode || 0x8000000000080000 || [[#SetGlobalAccessLogMode]]
Takes an input u64.
|-
 
| ([1.0.0-5.1.0] 0x12) || CanDebug || 0xC000000000000000 ||
== CreateSaveDataFileSystem ==
|-
Takes a 0x40-byte [[#SaveDataAttribute]], a 0x40-byte [[#SaveDataCreationInfo]], and a 0x10-byte input struct which governs creation of a saveMeta file.
| 0x12 || CanSetSpeedEmulationMode || 0x8000000000080000 || SetSpeedEmulationMode
 
|-
Only the first 0x5-bytes in the 0x10-byte struct are initialized: all-zero when automatically creating savedata during savecommon mount by official user-processes. In the dedicated save-creation code in official user-processes: +0 u32 = 0x40060 meta file size, +4 u8 = 1 meta index which dictates meta file name.
| ([1.0.0-5.1.0] 0x13) || || 0xC000000000800000 ||
 
|-
Creates non-system savedata.
| 0x13 || CanDebug || 0xC000000000000000 ||
 
|-
== CreateSaveDataFileSystemBySystemSaveDataId ==
| ([1.0.0-5.1.0] 0x14) || || 0xC000000001000000 ||
Takes a 0x40-byte [[#SaveDataAttribute]] and a 0x40-byte [[#SaveDataCreationInfo]].
|-
 
| 0x14 || CanFillBis || 0xC000000000800000 || CreatePaddingFile, DeleteAllPaddingFiles
Creates savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
|-
 
| ([1.0.0-4.1.0] 0x15) || || 0xC000000002000000 ||
== OpenGameCardStorage ==
|-
Takes two input u32s (gamecard handle, partition ID), and returns an [[#IStorage]] for the [[Gamecard_Format|partition]].
| ([5.0.0-5.1.0] 0x15) || || 0x8000000001000060 ||
 
|-
== OpenGameCardFileSystem ==
| 0x15 || CanCorruptSaveData || 0xC000000001000000 || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
Takes two input u32s, with the second u32 located at +4 in rawdata after the first u32. Returns an [[#IFileSystem]].
|-
 
| ([2.0.0-4.1.0] 0x16) || || 0x8000000004000000 ||
Mounts a [[Gamecard_Partition|gamecard partition]].
|-
 
| ([5.0.0-5.1.0] 0x16) || || 0x8000000000000060 ||
== CreateSaveDataFileSystemWithHashSalt ==
|-
Takes a total of 0xB0-bytes of input, no output.
| [2.0.0+] 0x16 || CanCorruptSystemSaveData || 0x8000000001000060 || CorruptSaveDataFileSystem, CorruptSaveDataFileSystemBySaveDataSpaceId
 
|-
== OpenSaveDataFileSystem ==
| ([2.0.0-4.1.0] 0x17) || || 0x8000000008000000 ||
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Official user-process code is only known to use value 1 for the u8.
|-
 
| ([5.0.0-5.1.0] 0x17) || || 0xC000000002000000 ||
Returns an [[#IFileSystem]].
|-
 
| [2.0.0+] 0x17 || CanVerifySaveData || 0x8000000000000060 || [[#VerifySaveDataFileSystem]], VerifySaveDataFileSystemBySaveDataSpaceId
Permissions aren't checked until the specified save is successfully found.
|-
 
| ([2.0.0-4.1.0] 0x18) || || 0x8000000010000000 ||
Only one process (specifically only one [[#IFileSystem]] session) can mount a given savedata at any given time (this includes SystemSaveData).
|-
 
| ([5.0.0-5.1.0] 0x18) || || 0x8000000004000000 ||
== OpenSaveDataFileSystemBySystemSaveDataId ==
|-
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Web-applet only uses value0 for the input u8.
| [2.0.0+] 0x18 || CanDebugSaveData || 0xC000000002000000 || [[#CreateSaveDataFileSystem]], [[#OpenSaveDataFileSystem]], [[#SetSaveDataRootPath]]
 
|-
Returns an [[#IFileSystem]].
| ([2.0.0-4.1.0] 0x19) || || 0x8000000000000800 ||
 
|-
Mounts savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
| ([5.0.0-5.1.0] 0x19) || || 0x8000000008000000 ||
 
|-
== OpenReadOnlySaveDataFileSystem ==
| [2.0.0+] 0x19 || CanFormatSdCard || 0x8000000004000000 || FormatSdCardFileSystem
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]], and returns an [[#IFileSystem]].
|-
 
| ([2.0.0-4.1.0] 0x1A) || || 0x8000000000004020 ||
Mounts SaveData as ReadOnly.
|-
 
| ([5.0.0-5.1.0] 0x1A) || || 0x8000000010000000 ||
== ReadSaveDataFileSystemExtraDataBySaveDataSpaceId ==
|-
Takes an input u8 [[#SaveDataSpaceId]], an input u64 saveID, and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
| [2.0.0+] 0x1A || CanGetRightsId || 0x8000000008000000 || GetRightsId, GetRightsIdAndKeyGenerationByPath, GetRightsIdByPath
 
|-
== ReadSaveDataFileSystemExtraData ==
| ([3.0.0-4.1.0] 0x1B) || || 0x8000000000002020 ||
Takes an input u64 saveID and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
|-
 
| ([5.0.0-5.1.0] 0x1B) || || 0x8000000000000800 ||
== OpenSaveDataInfoReader ==
|-
No input, returns an output [[#ISaveDataInfoReader]].
| [3.0.0+] 0x1B || CanRegisterExternalKey || 0x8000000010000000 || RegisterExternalKey, UnregisterAllExternalKey
 
|-
== OpenSaveDataInfoReaderBySaveDataSpaceId ==
| ([3.0.0-4.1.0] 0x1C) || || 0x8000000000000028 ||
Takes an input u8 [[#SaveDataSpaceId]], returns an output [[#ISaveDataInfoReader]].
|-
 
| ([5.0.0-5.1.0] 0x1C) || || 0x8000000000004020 ||
== FindSaveDataWithFilter ==
|-
Takes a total of 0x50-bytes of input, returns 8-bytes of output and a type-0x6 output buffer.
| [3.0.0+] 0x1C || CanSetEncryptionSeed || 0x8000000000000800 || [[#SetSdCardEncryptionSeed]]
 
|-
== OpenSaveDataInfoReaderWithFilter ==
| ([4.0.0-4.1.0] 0x1D) || || 0x8000000020000000 ||
Takes a total of 0x50-bytes of input, returns an [[#ISaveDataInfoReader]].
|-
 
| ([5.0.0-5.1.0] 0x1D) || || 0x8000000000000000 ||
== OpenSaveDataTransferManager ==
|-
No input, returns an [[#ISaveDataTransferManager]].
| [4.0.0+] 0x1D || CanWriteSaveDataFileSystemExtraDataTimeStamp || 0x8000000000000020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
 
|-
== OpenSaveDataTransferManagerVersion2 ==
| ([4.0.0-4.1.0] 0x1E) || || 0x8000000040000000 ||
No input, returns an [[#ISaveDataTransferManagerWithDivision]].
|-
 
| ([5.0.0-5.1.0] 0x1E) || || 0x8000000000002020 ||
== OpenSaveDataTransferProhibiter ==
|-
Takes an input u64, returns an [[#ISaveDataTransferProhibiter]].
| [4.0.0+] 0x1E || CanWriteSaveDataFileSystemExtraDataFlags || 0x8000000000004020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
 
|-
== ListAccessibleSaveDataOwnerId ==
| ([4.0.0-4.1.0] 0x1F) || || 0x8000000000000000 ||
Takes a total of 0x10-bytes of input, returns 4-bytes of output and a type-0x6 output buffer.
|-
 
| ([5.0.0-5.1.0] 0x1F) || || 0x8000000000000028 ||
== OpenSaveDataTransferManagerForSaveDataRepair ==
|-
No input, returns an output [[#ISaveDataTransferManagerForSaveDataRepair]].
| [4.0.0+] 0x1F || CanWriteSaveDataFileSystemExtraDataCommitId || 0x8000000000000020 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
 
|-
== OpenSaveDataMover ==
| ([4.0.0-4.1.0] 0x20) || || 0x8000000000000000 ||
Takes 2 input [[#SaveDataSpaceId]], an input u64 size and a TransferMemory handle. Returns an output [[#ISaveDataMover]].
|-
 
| ([5.0.0-5.1.0] 0x20) || || 0x8000000020000000 ||
== OpenSaveDataTransferManagerForRepair ==
|-
No input, returns an output [[#ISaveDataTransferManagerForRepair]].
| [4.0.0+] 0x20 || CanWriteSaveDataFileSystemExtraDataAll || 0x8000000000000000 || WriteSaveDataFileSystemExtraData, WriteSaveDataFileSystemExtraDataWithMask
 
|-
== OpenContentStorageFileSystem ==
| ([5.0.0-5.1.0] 0x21) || || 0x8000000040000000 ||
Takes a [[#ContentStorageId]]. Invalid values return 0x2EE202.
|-
 
| [5.0.0+] 0x21 || CanExtendSaveData || 0x8000000000002020 || ExtendSaveDataFileSystem
Returns an [[#IFileSystem]] with NCA files. The read data from these files is identical to the data read by [[NCM_services#ReadContentIdFile]].
|-
 
| ([5.0.0-5.1.0] 0x22) || || 0x0000000080000002 ||
== OpenCloudBackupWorkStorageFileSystem ==
|-
Takes 4-bytes of input, returns an [[#IFileSystem]].
| [5.0.0+] 0x22 || CanExtendSystemSaveData || 0x8000000000000028 || ExtendSaveDataFileSystem
 
|-
== OpenCustomStorageFileSystem ==
| ([5.0.0-5.1.0] 0x23) || || 0x8000000000000000 ||
Takes a [[#CustomStorageId]]. Invalid values return 0x2EE202.
|-
 
| ([6.0.0-9.2.0] 0x23) || || 0x8000000020000000 ||
Returns an [[#IFileSystem]] from either User:/CustomStorage0 or Sdcard:/Nintendo/CustomStorage0. If on the SD card, an AesXtsFileSystem is created using a key source specifically for custom storage.
|-
 
| [5.0.0+] 0x23 || CanExtendOthersSystemSaveData || 0x8000000000000020 || ExtendSaveDataFileSystem
== OpenDataStorageByDataId ==
|-
Takes a [[NCM_services#StorageId|StorageID]] and a [[NCM_services#DataId|DataId]].
| ([5.0.0-5.1.0] 0x24) || || 0x8000000000000000 ||
 
|-
Returns a [[IPC_Marshalling#Domain_message|domain object ID]] implementing the [[#IStorage]] interface for data archives.
| ([6.0.0-9.2.0] 0x24) || || 0x8000000040000000 ||
 
|-
== OpenDataFileSystemWithProgramIndex ==
| [5.0.0+] 0x24 || CanRegisterUpdatePartition || 0x8000000020000000 || RegisterUpdatePartition
Takes an input u8, returns an [[#IFileSystem]].
|-
 
| ([5.0.0-5.1.0] 0x25) || || 0x8000000080200000 ||
== OpenDataStorageWithProgramIndex ==
|-
Takes an input u8, returns an [[#IStorage]].
| ([6.0.0-9.2.0] 0x25) || || 0x8000000200000000 ||
 
|-
== OpenDeviceOperator ==
| [5.0.0+] 0x25 || CanOpenSaveDataTransferManager || 0x8000000040000000 || [[#OpenSaveDataTransferManager]]
This command returns a session to a port implementing the [[#IDeviceOperator]] interface.
|-
 
| ([5.0.0-5.1.0] 0x26) || || 0x8000000080000110 ||
== OpenSdCardDetectionEventNotifier ==
|-
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
| ([6.0.0-8.1.0] 0x26) || || 0x8000000200002000 ||
 
|-
== OpenGameCardDetectionEventNotifier ==
| ([9.0.0-9.2.0] 0x26) || || 0x8000000200000000 ||
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
|-
 
| [5.0.0+] 0x26 || CanOpenSaveDataTransferManagerVersion2 || 0x8000000200000000 || [[#OpenSaveDataTransferManagerVersion2]]
== SimulateDeviceDetectionEvent ==
|-
Takes a total of 0xC-bytes of input, no output.
| ([5.0.0-5.1.0] 0x27) || || 0x8000000000100008 ||
 
|-
== VerifySaveDataFileSystem ==
| ([6.0.0-7.0.1] 0x27) || || 0x8000000200002000 ||
Takes an unknown input u64 and a type-0x6 output buffer.
|-
| ([8.0.0-8.1.0] 0x27) || || 0x8000000240002000 ||
|-
| ([9.0.0-9.2.0] 0x27) || || 0x8000000000000000 ||
|-
| [5.0.0+] 0x27 || CanOpenSaveDataTransferManagerForSaveDataRepair || 0x8000000200000000 || OpenSaveDataTransferManagerForSaveDataRepair
|-
| ([5.0.0-5.1.0] 0x28) || || 0x8000000080010000 ||
|-
| ([6.0.0-8.1.0] 0x28) || || 0x8000000000000000 ||
|-
| ([9.0.0-9.2.0] 0x28) || || 0x8000000200002000 ||
|-
| [5.0.0+] 0x28 || CanOpenSaveDataTransferManagerForSaveDataRepairTool || 0x8000000000000000 || OpenSaveDataTransferManagerForSaveDataRepair
|-
| ([5.0.0-5.1.0] 0x29) || || 0x0000000080000001 ||
|-
| ([6.0.0-8.1.0] 0x29) || || 0x8000000000000000 ||
|-
| ([9.0.0-9.2.0] 0x29) || || 0x8000000240002000 ||
|-
| [5.0.0+] 0x29 || CanOpenOpenSaveDataTransferProhibiter || 0x8000000200002000 || [[#OpenSaveDataTransferProhibiter]]
|-
| ([5.0.0-5.1.0] 0x2A) || || 0x0000000080000001 ||
|-
| ([6.0.0-8.1.0] 0x2A) || || 0x8000000080200000 ||
|-
| ([9.0.0-9.2.0] 0x2A) || || 0x8000000000000000 ||
|-
| [5.0.0+] 0x2A || CanOpenSaveDataMover || 0x8000001000000000 || [[#OpenSaveDataMover]]
|-
| ([5.0.0-5.1.0] 0x2B) || || 0x0000000080000001 ||
|-
| ([6.0.0-8.1.0] 0x2B) || || 0x8000000080000110 ||
|-
| ([9.0.0-9.2.0] 0x2B) || || 0x8000000000000000 ||
|-
| [5.0.0+] 0x2B || CanOpenBisWiper || 0x8000000000000800 || [[#OpenBisWiper]]
|-
| ([5.0.0-5.1.0] 0x2C) || || 0x0000000080000001 ||
|-
| ([6.0.0-8.1.0] 0x2C) || || 0x8000000000100008 ||
|-
| ([9.0.0-9.2.0] 0x2C) || || 0x8000000080200000 ||
|-
| [5.0.0+] 0x2C || CanListAccessibleSaveDataOwnerId || 0x8000000240002000 || [[#ListAccessibleSaveDataOwnerId]]
|-
| ([5.0.0-5.1.0] 0x2D) || || 0x0000000080000001 ||
|-
| ([6.0.0-8.1.0] 0x2D) || || 0x8000000000010000 ||
|-
| ([9.0.0-9.2.0] 0x2D) || || 0x8000000080000110 ||
|-
| [5.0.0+] 0x2D || CanControlMmcPatrol || 0x8000000000000000 || SuspendMmcPatrol, ResumeMmcPatrol
|-
| ([5.0.0-5.1.0] 0x2E) || || 0x8000000040000000 ||
|-
| ([6.0.0-8.1.0] 0x2E) || || 0x8000000100000000 ||
|-
| ([9.0.0-9.2.0] 0x2E) || || 0x8000000000100008 ||
|-
| [5.0.0+] 0x2E || CanOverrideSaveDataTransferTokenSignVerificationKey || 0x8000000000000000 || OverrideSaveDataTransferTokenSignVerificationKey
|-
| ([5.0.0-5.1.0] 0x2F) || || 0x8000000080200000 ||
|-
| ([6.0.0-8.1.0] 0x2F) || || 0x8000000100000000 ||
|-
| ([9.0.0-9.2.0] 0x2F) || || 0x8000000000010000 ||
|-
| [5.0.0+] 0x2F || CanOpenSdCardDetectionEventNotifier || 0x8000000080200000 || [[#OpenSdCardDetectionEventNotifier]]
|-
| ([5.1.0-6.0.0] 0x30) || || 0x8000000080080000 ||
|-
| ([6.0.1-9.2.0] 0x30) || || 0x8000000100000000 ||
|-
| [5.1.0+] 0x30 || CanOpenGameCardDetectionEventNotifier || 0x8000000080000110 || [[#OpenGameCardDetectionEventNotifier]]
|-
| ([6.0.0-9.2.0] 0x31) || || 0x8000000100000000 ||
|-
| [6.0.0+] 0x31 || CanOpenSystemDataUpdateEventNotifier || 0x8000000000100008 || OpenSystemDataUpdateEventNotifier
|-
| ([6.0.0-9.2.0] 0x32) || || 0x8000000100000000 ||
|-
| [6.0.0+] 0x32 || CanNotifySystemDataUpdateEvent || 0x8000000000010000 || NotifySystemDataUpdateEvent
|-
| ([6.0.0-8.1.0] 0x33) || || 0x8000000040000000 ||
|-
| ([9.0.0-9.2.0] 0x33) || || 0x8000000100000000 ||
|-
| [6.0.0+] 0x33 || CanOpenAccessFailureDetectionEventNotifier || 0x8000000100000000 || [[#OpenAccessFailureDetectionEventNotifier]]
|-
| ([6.0.0-8.1.0] 0x34) || || 0x8000000200000020 ||
|-
| ([9.0.0-9.2.0] 0x34) || || 0x8000000100000000 ||
|-
| [6.0.0+] 0x34 || CanGetAccessFailureDetectionEvent || 0x8000000100000000 || GetAccessFailureDetectionEvent
|-
| ([6.0.0-8.1.0] 0x35) || || 0x8000000000200000 ||
|-
| ([9.0.0-9.2.0] 0x35) || || 0x8000000040000000 ||
|-
| [6.0.0+] 0x35 || CanIsAccessFailureDetected || 0x8000000100000000 || IsAccessFailureDetected
|-
| ([6.0.0-8.1.0] 0x36) || || 0x4000000000000000 ||
|-
| ([9.0.0-9.2.0] 0x36) || || 0x8000000200000020 ||
|-
| [6.0.0+] 0x36 || CanResolveAccessFailure || 0x8000000100000000 || ResolveAccessFailure
|-
| ([6.0.0-6.2.0] 0x37) || || 0x8000000000080000 ||
|-
| ([7.0.0-8.1.0] 0x37) || || 0x8000000000000000 ||
|-
| ([9.0.0-9.2.0] 0x37) || || 0x8000000000200000 ||
|-
| [6.0.0+] 0x37 || CanAbandonAccessFailure || 0x8000000100000000 || AbandonAccessFailure
|-
| ([6.0.0-6.2.0] 0x38) || || 0x8000000000000000 ||
|-
| ([7.0.0-8.1.0] 0x38) || || 0x8000000400000000 ||
|-
| ([9.0.0-9.2.0] 0x38) || || 0x4000000000000000 ||
|-
| [6.0.0+] 0x38 || CanQuerySaveDataInternalStorageTotalSize || 0x8000000040000000 || QuerySaveDataInternalStorageTotalSize
|-
| ([8.0.0-8.1.0] 0x39) || || 0x8000000000000010 ||
|-
| ([9.0.0-9.2.0] 0x39) || || 0x8000000000000000 ||
|-
| [8.0.0+] 0x39 || CanGetSaveDataCommitId || 0x8000000200000020 || [[#GetSaveDataCommitId]]
|-
| ([9.0.0-9.2.0] 0x3A) || || 0x8000000400000000 ||
|-
| [9.0.0+] 0x3A || CanSetSdCardAccessibility || 0x8000000000200000 || SetSdCardAccessibility
|-
| ([9.0.0-9.2.0] 0x3B) || || 0x8000000000000010 ||
|-
| [9.0.0+] 0x3B || CanSimulateDevice || 0x4000000000000000 || SimulateDeviceDetectionEvent, SetSimulationEvent, ClearSimulationEvent
|-
| ([9.0.0-9.2.0] 0x3C) || || 0x8000000800000000 ||
|-
| [9.0.0+] 0x3C || CanCreateSaveDataWithHashSalt || 0x8000000000000000 || [[#CreateSaveDataFileSystem]], [[#CreateSaveDataFileSystemWithHashSalt]]
|-
| ([9.0.0-9.2.0] 0x3D) || || 0x8000000800000000 ||
|-
| [9.0.0+] 0x3D || CanRegisterProgramIndexMapInfo || 0x8000000400000000 || RegisterProgramIndexMapInfo
|-
| ([9.0.0-9.2.0] 0x3E) || || 0x8000000800000000 ||
|-
| [9.0.0+] 0x3E || CanChallengeCardExistence || 0x8000000000000010 || ChallengeCardExistence
|-
| ([9.0.0-9.2.0] 0x3F) || || 0x8000000800000000 ||
|-
| [9.0.0+] 0x3F || CanCreateOwnSaveData || 0x8000000800000000 || [[#CreateSaveDataFileSystem]], CreateSaveDataFileSystemWithHashSalt
|-
| ([9.0.0-9.2.0] 0x40) || || 0x8000000800000000 ||
|-
| ([10.0.0-10.1.1] 0x40) || || 0x8000000800000000 ||
|-
| [9.0.0+] 0x40 || CanDeleteOwnSaveData || 0x8000000800000000 || [[#DeleteSaveDataFileSystem]]
|-
| ([9.0.0-10.1.1] 0x41) || || 0x8000000800000000 ||
|-
| [9.0.0+] 0x41 || CanReadOwnSaveDataFileSystemExtraData || 0x8000000800000000 || [[#ReadSaveDataFileSystemExtraData]]
|-
| ([10.0.0-10.1.1] 0x42) || || 0x8000000800000000 ||
|-
| [10.0.0+] 0x42 || CanExtendOwnSaveData || 0x8000000800000000 || ExtendSaveDataFileSystem
|-
| ([10.0.0-10.1.1] 0x43) || || 0x8000000800000000 ||
|-
| [10.0.0+] 0x43 || CanOpenOwnSaveDataTransferProhibiter || 0x8000000800000000 || [[#OpenSaveDataTransferProhibiter]]
|-
| [10.2.0+] 0x44 || CanFindOwnSaveDataWithFilter || 0x8000000800000000 || [[#FindSaveDataWithFilter]]
|}


== OpenFileSystem ==
The input u64 high-byte must be non-zero, otherwise an [[Error_codes|error]] is returned(0xE02).
Takes a type-0x19 input [[#ContentPath]] and a [[#FileSystemProxyType]] as parameters. Returns an [[#IFileSystem]].


[2.0.0+] This function was removed.
== GetSaveDataCommitId ==
Takes an input u8 and u64, returns an output u64.


== SetCurrentProcess ==
== SetSdCardEncryptionSeed ==
Takes a pid-descriptor.
Takes in the 0x10 byte SD card encryption seed, and loads it into FS-module state.


== OpenFileSystemWithPatch ==
[[NS_Services|NS]]-module reads the 0x10 bytes from SdCard:/Nintendo/Contents/private, and compares them to the first 0x10 bytes of the ns_appman:/private (in [[Flash_Filesystem#System_Savegames|system savedata]] 0x8000000000000043). If they match, NS calls this command using bytes 0x10-0x20 from ns_appman:/private. The rest of this file (0x1F0 bytes total) is all-zero except for the byte at offset 0x20. This byte is set to 1 by NS if the SD card has been mounted successfully and is subsequently passed to SetSdCardAccessibility.
Takes an input [[#FileSystemProxyType]] and an u64 title-id. Returns an [[#IFileSystem]].


Web-applet loads the [[#FileSystemProxyType]] (which must be '''Manual''') from u32_table[inparam].
== OpenAccessFailureDetectionEventNotifier ==
Takes 8-bytes of input and returns an [[#IEventNotifier]].


Note: web-applet strings refer to both this cmd and [[#OpenFileSystemWithId]] as "MountContent", but official nn_sf_sync symbols use "OpenXX" names.
[8.0.0+] Now takes an additional 8-bytes of input.


== OpenFileSystemWithId ==
== SetSaveDataSize ==
Takes a type-0x19 input buffer, an [[#FileSystemProxyType]] and an u64 title-id. Returns an [[#IFileSystem]].
Takes two input u64s "size" and "journal_size", and writes them to fsp-srv object member variables.


The [[#IFileSystem]] must be '''Meta''' if the NCA type is 0.
These variables are normally initialized with 32 MiB (0x2000000) and 16 MiB (0x1000000), respectively.


The input buffer is the output string path from [[NS_Services#GetApplicationContentPath|GetApplicationContentPath]].
These variables don't seem to be actually used anywhere else (?)


May return errors when attempting to access NCA-paths for an update-title with a gamecard, when the gamecard isn't inserted. May return error 0x7D402 in some cases with update-titles. Non-val2 in32 values with NCA-type1 are unusable, even for normal titles.
== SetSaveDataRootPath ==
Takes an input path, and does snprintf(<fsp-srv object>->m_save_data_root_path, FS_MAX_PATH-1, "/%s", input_path);


The official "MountApplicationPackage" func uses this with in64=0 and [[#FileSystemProxyType]] '''Package'''.
This path is normally all-zero. When this path is non-zero, the internal OpenSaveDataFileSystem function will create a DirectorySaveDataFileSystem if the target save is a user-save + a directory exists, instead of the normal savedata filesystem object.


After the [[#FileSystemProxyType]] specific permissions are checked, it then gets the func retval for permissions-type 0x25 and func0.
== SetGlobalAccessLogMode ==
Takes an input u32.


When [[#FileSystemProxyType]] is '''Meta''', it uses in64=0xffffffffffffffff internally, otherwise it checks if in64 is set to 0xffffffffffffffff then throws an error if so. When the in64 used internally is not 0xffffffffffffffff, it's compared with the NCA [[NCM_services#ProgramId|ProgramId]], then an error is thrown on mismatch.
== SetGlobalAccessLogMode ==
Takes an input u32.


== OpenBisFileSystem ==
== GetGlobalAccessLogMode ==
Takes a type-0x19 input buffer string and a [[#BisPartitionId]]. Official user-process code sets instr[0] = 0 normally. Returns an [[#IFileSystem]].
Returns an output u32.


Only partitionIDs for FAT partitions are usable with this, otherwise error 0x2EE202 is returned. Seems to be about the same as [[#OpenBisStorage]] except this mounts the partition filesystem instead of allowing direct access to the partition sectors.
GlobalAccessLogMode is normally 0.


== OpenBisStorage ==
== OutputAccessLogToSdCard ==
Takes a u32 partition ID, returns 0x2EE202 for partitions which do not exist, 0x320002 for partitions which cannot be opened and a valid [[#IStorage]] handle otherwise.
Takes a type-0x5 input buffer.


== InvalidateBisCache ==
The input buffer is the string to output to the log. User-processes normally include a newline at the end.
Seems to invalidate the Bis cache for MBR/GPT after overwriting that data via the OpenBisStorage IStorage. Used by [[SystemInitializer]].


== DeleteSaveDataFileSystem ==
User-processes only use this when the value previously loaded from [[#GetGlobalAccessLogMode]] has bit1 set.
Takes an input u64.


== CreateSaveDataFileSystem ==
When bit1 in GlobalAccessLogMode is clear, FS-module will just return 0 for OutputAccessLogToSdCard. However even with that set the log doesn't show up SD, unknown why.
Takes a 0x40-byte [[#SaveDataAttribute]], a 0x40-byte [[#SaveDataCreationInfo]], and a 0x10-byte input struct which governs creation of a saveMeta file.


Only the first 0x5-bytes in the 0x10-byte struct are initialized: all-zero when automatically creating savedata during savecommon mount by official user-processes. In the dedicated save-creation code in official user-processes: +0 u32 = 0x40060 meta file size, +4 u8 = 1 meta index which dictates meta file name.
The input buffer is written to the "$FsAccessLog:/FsAccessLog.txt" file, where "$FsAccessLog" is the SD-card mount-name. It's written to the current end of the file(appended).


Creates non-system savedata.
== GetProgramIndexForAccessLog ==
No input, returns two 32-bit values "version" and "program_index".


== CreateSaveDataFileSystemBySystemSaveDataId ==
== OpenMultiCommitManager ==
Takes a 0x40-byte [[#SaveDataAttribute]] and a 0x40-byte [[#SaveDataCreationInfo]].
No input, returns an output [[#IMultiCommitManager]].


Creates savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
== OpenBisWiper ==
Takes an input u64 size and a TransferMemory handle. Returns an output [[#IWiper]].


== OpenGameCardStorage ==
= IStorage =
Takes two input u32s (gamecard handle, partition ID), and returns an [[#IStorage]] for the [[Gamecard_Format|partition]].
This is "nn::fssrv::sf::IStorage".


== OpenGameCardFileSystem ==
This is the interface for a raw device, usually a block device.
Takes two input u32s, with the second u32 located at +4 in rawdata after the first u32. Returns an [[#IFileSystem]].


Mounts a [[Gamecard_Partition|gamecard partition]].
{| class="wikitable" border="1"
|-
! Cmd || Name
|-
| 0 || [[#Read]]
|-
| 1 || [[#Write]]
|-
| 2 || [[#Flush]]
|-
| 3 || [[#SetSize]]
|-
| 4 || [[#GetSize]]
|-
| 5 || [4.0.0+] OperateRange
|}


== CreateSaveDataFileSystemWithHashSalt ==
== Read ==
Takes a total of 0xB0-bytes of input, no output.
Takes a type-0x46 buffer, an offset and length.


== OpenSaveDataFileSystem ==
== Write ==
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Official user-process code is only known to use value 1 for the u8.
Takes a type-0x45 buffer, an offset and length.


Returns an [[#IFileSystem]].
== Flush ==
No input.


Permissions aren't checked until the specified save is successfully found.
== SetSize ==
Takes a size.


Only one process (specifically only one [[#IFileSystem]] session) can mount a given savedata at any given time (this includes SystemSaveData).
== GetSize ==
Returns a size.


== OpenSaveDataFileSystemBySystemSaveDataId ==
= IFileSystem =
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]]. Web-applet only uses value0 for the input u8.
This is "nn::fssrv::sf::IFileSystem".


Returns an [[#IFileSystem]].
There are two main implementations of this interface:


Mounts savedata in the SYSTEM [[Flash_Filesystem|NAND]] partition.
* '''nn::fs::fsa::IFileSystem''': The main IFileSystem implementation. Filesystem classes implement this interface, and FS code usually operates on this interface.
* '''nn::fssrv::sf::IFileSystem''': Used for sending an IFileSystem over IPC. Not used outside of IPC code.


== OpenReadOnlySaveDataFileSystem ==
There are two adapter classes to convert between these interfaces:
Takes an input u8 [[#SaveDataSpaceId]] and a 0x40-byte [[#SaveDataAttribute]], and returns an [[#IFileSystem]].


Mounts SaveData as ReadOnly.
* '''nn::fssrv::detail::FileSystemInterfaceAdapter''': Allows access to an nn::fs::fsa::IFileSystem via the nn::fssrv::sf::IFileSystem interface.
* '''nn::fs::detail::FileSystemServiceObjectAdapter''': Allows access to an nn::fssrv::sf::IFileSystem via the nn::fs::fsa::IFileSystem interface.


== ReadSaveDataFileSystemExtraDataBySaveDataSpaceId ==
When the FS process returns a filesystem, it will wrap the filesystem object in a FileSystemInterfaceAdapter to return it over IPC.
Takes an input u8 [[#SaveDataSpaceId]], an input u64 saveID, and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
Then when FS application code receives that filesystem, it will wrap the nn::fssrv::sf::IFileSystem object in a FileSystemServiceObjectAdapter before using it.


== ReadSaveDataFileSystemExtraData ==
{| class="wikitable" border="1"
Takes an input u64 saveID and a type-0x6 output buffer containing the [[#SaveDataFileSystemExtraData]].
|-
 
! Cmd || Name
== OpenSaveDataInfoReader ==
|-
No input, returns an output [[#ISaveDataInfoReader]].
| 0 || CreateFile
 
|-
== OpenSaveDataInfoReaderBySaveDataSpaceId ==
| 1 || DeleteFile
Takes an input u8 [[#SaveDataSpaceId]], returns an output [[#ISaveDataInfoReader]].
|-
| 2 || CreateDirectory
|-
| 3 || DeleteDirectory
|-
| 4 || DeleteDirectoryRecursively
|-
| 5 || RenameFile
|-
| 6 || RenameDirectory
|-
| 7 || [[#GetEntryType]]
|-
| 8 || [[#OpenFile]]
|-
| 9 || [[#OpenDirectory]]
|-
| 10 || [[#Commit]]
|-
| 11 || [[#GetFreeSpaceSize]]
|-
| 12 || [[#GetTotalSpaceSize]]
|-
| 13 || [3.0.0+] [[#CleanDirectoryRecursively]]
|-
| 14 || [3.0.0+] [[#GetFileTimeStampRaw]]
|-
| 15 || [4.0.0+] QueryEntry
|-
| 16 || [15.0.0+] GetFileSystemAttribute
|}


== FindSaveDataWithFilter ==
== GetEntryType ==
Takes a total of 0x50-bytes of input, returns 8-bytes of output and a type-0x6 output buffer.
Takes a type-0x9 input buffer for the path and returns [[#DirectoryEntryType]] as an output u32.


== OpenSaveDataInfoReaderWithFilter ==
== OpenFile ==
Takes a total of 0x50-bytes of input, returns an [[#ISaveDataInfoReader]].
Takes a type-0x19 input buffer for the path, and an u32 '''mode'''. '''mode''' controls how the file is opened, based on which bits are set:


== OpenSaveDataTransferManager ==
* When bit 0 is set, the file is Readable: you can use the Read operation.
No input, returns an [[#ISaveDataTransferManager]].
* When bit 1 is set, the file is Writable: you can use the Write operation.
* When bit 2 is set, the file is Appendable: unless this bit is set, you will not be able to write beyond the end of a file (such writes will result in an error 0x307202)


== OpenSaveDataTransferManagerVersion2 ==
== OpenDirectory ==
No input, returns an [[#ISaveDataTransferManagerWithDivision]].
Takes a type-0x9 input buffer for the path and an u64 '''filter_flags'''. '''filter_flags''' controls what type of entries are read by the [[#IDirectory]]: bitmask 0x1 = directories, bitmask 0x2 = files.


== OpenSaveDataTransferProhibiter ==
== Commit ==
Takes an input u64, returns an [[#ISaveDataTransferProhibiter]].
Like [https://3dbrew.org/wiki/FS:ControlArchive 3DS], this has to be used after writing to savedata for the changes to take affect.


== ListAccessibleSaveDataOwnerId ==
== GetFreeSpaceSize ==
Takes a total of 0x10-bytes of input, returns 4-bytes of output and a type-0x6 output buffer.
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total free space with this FS.


== OpenSaveDataTransferManagerForSaveDataRepair ==
== GetTotalSpaceSize ==
No input, returns an output [[#ISaveDataTransferManagerForSaveDataRepair]].
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total space available with this FS(free+used).


== OpenSaveDataMover ==
== CleanDirectoryRecursively ==
Takes 2 input [[#SaveDataSpaceId]], an input u64 size and a TransferMemory handle. Returns an output [[#ISaveDataMover]].
Takes a type-0x9 input buffer for the path and clears the contents of the directory specified in the path.


== OpenContentStorageFileSystem ==
== GetFileTimeStampRaw ==
Takes a [[#ContentStorageId]]. Invalid values return 0x2EE202.
Takes a type-0x19 input buffer for the path and returns a 0x20-byte struct. This contains 3 u64s and an u8.


Returns an [[#IFileSystem]] with NCA files. The read data from these files is identical to the data read by [[NCM_services#ReadContentIdFile]].
= IDirectory =
This is "nn::fssrv::sf::IDirectory".


== OpenCloudBackupWorkStorageFileSystem ==
{| class="wikitable" border="1"
Takes 4-bytes of input, returns an [[#IFileSystem]].
|-
! Cmd || Name
|-
| 0 || [[#Read]]
|-
| 1 || [[#GetEntryCount]]
|}


== OpenCustomStorageFileSystem ==
== Read ==
Takes a [[#CustomStorageId]]. Invalid values return 0x2EE202.
Takes a type-0x6 output buffer. Returns an output u64(?) for the total number of read entries, this is 0 when no more entries are available.


Returns an [[#IFileSystem]] from either User:/CustomStorage0 or Sdcard:/Nintendo/CustomStorage0. If on the SD card, an AesXtsFileSystem is created using a key source specifically for custom storage.
The output buffer contains the read array of [[#DirectoryEntry]]. This doesn't include entries for "." and "..".


== OpenDataStorageByDataId ==
== GetEntryCount ==
Takes a [[NCM_services#StorageId|StorageID]] and a [[NCM_services#DataId|DataId]].
Returns an u64 for the total number of readable entries.


Returns a [[IPC_Marshalling#Domain_message|domain object ID]] implementing the [[#IStorage]] interface for data archives.
= DirectoryEntry =
This is "nn::fs::DirectoryEntry".


== OpenDataFileSystemWithProgramIndex ==
{| class="wikitable" border="1"
Takes an input u8, returns an [[#IFileSystem]].
|-
! Offset || Size || Description
|-
| 0x0 || 0x301 || Path
|-
| 0x301 || 0x1 || File attributes (bit 0 = is directory; bit 1 = archive bit)
|-
| 0x302 || 0x2 || Padding?
|-
| 0x304 || 0x1 || [[#DirectoryEntryType]]
|-
| 0x305 || 0x3 || Padding?
|-
| 0x308 || 0x8 || Filesize, 0 for directories.
|}


== OpenDataStorageWithProgramIndex ==
= DirectoryEntryType =
Takes an input u8, returns an [[#IStorage]].
This is "nn::fs::DirectoryEntryType".


== OpenDeviceOperator ==
An s8 value indicating a directory entry type. The current values are:
This command returns a session to a port implementing the [[#IDeviceOperator]] interface.


== OpenSdCardDetectionEventNotifier ==
{| class="wikitable" border="1"
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
|-
! Value || Description
|-
| 0 || Directory
|-
| 1 || File
|}


== OpenGameCardDetectionEventNotifier ==
= IFile =
This command returns a session to a port implementing the [[#IEventNotifier]] interface.
This is "nn::fssrv::sf::IFile".


== SimulateDeviceDetectionEvent ==
{| class="wikitable" border="1"
Takes a total of 0xC-bytes of input, no output.
|-
! Cmd || Name
|-
| 0 || Read
|-
| 1 || Write
|-
| 2 || Flush
|-
| 3 || SetSize
|-
| 4 || GetSize
|-
| 5 || [4.0.0+] OperateRange
|-
| 6 || [12.0.0+] OperateRangeWithBuffer
|}


== VerifySaveDataFileSystem ==
= ISaveDataInfoReader =
Takes an unknown input u64 and a type-0x6 output buffer.
This is "nn::fssrv::sf::ISaveDataInfoReader".


The input u64 high-byte must be non-zero, otherwise an [[Error_codes|error]] is returned(0xE02).
{| class="wikitable" border="1"
|-
! Cmd || Name
|-
| 0 || [[#ReadSaveDataInfo]]
|}


== GetSaveDataCommitId ==
== ReadSaveDataInfo ==
Takes an input u8 and u64, returns an output u64.
Takes a type-0x6 output buffer. Returns an output u64 for total output entries. This buffer contains an array of [[#SaveDataInfo]].


== SetSdCardEncryptionSeed ==
This is used to get [[#SaveDataInfo]] for all savedata on the system (or all savedata for the current [[#SaveDataSpaceId]]). When used multiple times, it will resume reading where it left off, until no more entries are available (in that case the out u64 is value 0).
Takes in the 0x10 byte SD card encryption seed, and loads it into FS-module state.


[[NS_Services|NS]]-module reads the 0x10 bytes from SdCard:/Nintendo/Contents/private, and compares them to the first 0x10 bytes of the ns_appman:/private (in [[Flash_Filesystem#System_Savegames|system savedata]] 0x8000000000000043). If they match, NS calls this command using bytes 0x10-0x20 from ns_appman:/private. The rest of this file (0x1F0 bytes total) is (usually/always?) all-zero (however in some cases the byte at offset 0x20 is value 0x1).
= IDeviceOperator =
This is "nn::fssrv::sf::IDeviceOperator".


== OpenAccessFailureDetectionEventNotifier ==
{| class="wikitable" border="1"
Takes 8-bytes of input and returns an [[#IEventNotifier]].
|-
 
! Cmd || Name
[8.0.0+] Now takes an additional 8-bytes of input.
|-
 
| 0 || [[#IsSdCardInserted]]
== SetSaveDataSize ==
|-
Takes two input u64s "size" and "journal_size", and writes them to fsp-srv object member variables.
| 1 || [[#GetSdCardSpeedMode]]
 
|-
These variables are normally initialized with 32 MiB (0x2000000) and 16 MiB (0x1000000), respectively.
| 2 || [2.0.0+] [[#GetSdCardCid]]
 
|-
These variables don't seem to be actually used anywhere else (?)
| 3 || [2.0.0+] [[#GetSdCardUserAreaSize]]
 
|-
== SetSaveDataRootPath ==
| 4 || [2.0.0+] [[#GetSdCardProtectedAreaSize]]
Takes an input path, and does snprintf(<fsp-srv object>->m_save_data_root_path, FS_MAX_PATH-1, "/%s", input_path);
|-
 
| 5 || [2.0.0+] [[#GetAndClearSdCardErrorInfo]]
This path is normally all-zero. When this path is non-zero, the internal OpenSaveDataFileSystem function will create a DirectorySaveDataFileSystem if the target save is a user-save + a directory exists, instead of the normal savedata filesystem object.
|-
 
| 6 || [17.0.0+] [[#GetSdCardHostControllerStatus]]
== SetGlobalAccessLogMode ==
|-
Takes an input u32.
| 7 || [20.0.0+] SetSdCardActivationMode
 
|-
== SetGlobalAccessLogMode ==
| 8 || [20.0.0+] TryGetSdCardInfo
Takes an input u32.
|-
 
| 100 || [[#GetMmcCid]]
== GetGlobalAccessLogMode ==
|-
Returns an output u32.
| 101 || [[#GetMmcSpeedMode]]
 
|-
GlobalAccessLogMode is normally 0.
| 110 || [[#EraseMmc]]
 
|-
== OutputAccessLogToSdCard ==
| 111 || [[#GetMmcPartitionSize]]
Takes a type-0x5 input buffer.
|-
 
| 112 || [2.0.0+] [[#GetMmcPatrolCount]]
The input buffer is the string to output to the log. User-processes normally include a newline at the end.
|-
 
| 113 || [2.0.0+] [[#GetAndClearMmcErrorInfo]]
User-processes only use this when the value previously loaded from [[#GetGlobalAccessLogMode]] has bit1 set.
|-
 
| 114 || [2.0.0+] [[#GetMmcExtendedCsd]]
When bit1 in GlobalAccessLogMode is clear, FS-module will just return 0 for OutputAccessLogToSdCard. However even with that set the log doesn't show up SD, unknown why.
|-
 
| 115 || [4.0.0+] [[#SuspendMmcPatrol]]
The input buffer is written to the "$FsAccessLog:/FsAccessLog.txt" file, where "$FsAccessLog" is the SD-card mount-name. It's written to the current end of the file(appended).
|-
 
| 116 || [4.0.0+] [[#ResumeMmcPatrol]]
== GetProgramIndexForAccessLog ==
|-
No input, returns two 32-bit values "version" and "program_index".
| 117 || [17.0.0+] [[#EraseMmcWithRange]]
 
|-
== OpenMultiCommitManager ==
| 118 || [20.0.0+] MarkBeforeEraseMmcPartitionUserData
No input, returns an output [[#IMultiCommitManager]].
|-
 
| 119 || [20.0.0+] CheckAfterEraseMmcPartitionUserData
== OpenBisWiper ==
|-
Takes an input u64 size and a TransferMemory handle. Returns an output [[#IWiper]].
| 200 || [[#IsGameCardInserted]]
 
|-
= IStorage =
| 201 || [[#EraseGameCard]]
This is "nn::fssrv::sf::IStorage".
|-
 
| 202 || [[#GetGameCardHandle]]
This is the interface for a raw device, usually a block device.
|-
 
| 203 || [[#GetGameCardUpdatePartitionInfo]]
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
| 204 || [[#FinalizeGameCardDriver]]
|-
|-
| 0 || [[#Read]]
| 205 || [[#GetGameCardAttribute]]
|-
|-
| 1 || [[#Write]]
| 206 || [[#GetGameCardDeviceCertificate]]
|-
|-
| 2 || [[#Flush]]
| 207 || [[#GetGameCardAsicInfo]]
|-
|-
| 3 || [[#SetSize]]
| 208 || [[#GetGameCardIdSet]]
|-
|-
| 4 || [[#GetSize]]
| 209 || [[#WriteToGameCardDirectly]]
|-
|-
| 5 || [4.0.0+] OperateRange
| 210 || [[#SetVerifyWriteEnalbleFlag]]
|-
| 211 || [[#GetGameCardImageHash]]
|-
| 212 || [2.0.0+] [[#GetGameCardDeviceIdForProdCard]]
|-
| 213 || [2.0.0+] [[#EraseAndWriteParamDirectly]]
|-
| 214 || [2.0.0+] [[#ReadParamDirectly]]
|-
| 215 || [2.0.0+] [[#ForceEraseGameCard]]
|-
| 216 || [2.0.0+] [[#GetGameCardErrorInfo]]
|-
| 217 || [2.1.0+] [[#GetGameCardErrorReportInfo]]
|-
| 218 || [3.0.0+] [[#GetGameCardDeviceId]]
|-
| 219 || [8.0.0+] [[#ChallengeCardExistence]]
|-
| 220 || [9.0.0+] [[#GetGameCardCompatibilityType]]
|-
| 221 || [17.0.0+] [[#GetGameCardAsicCertificate]]
|-
| 222 || [18.0.0+] [[#GetGameCardCardHeader]]
|-
| 223 || [19.0.0+] [[#SetGameCardSessionCreationDelay]]
|-
| 224 || [19.0.0+] [[#GetGameCardApplicationIdList]]
|-
| 225 || [20.0.0+] RegisterGameCardConfigurationData
|-
| 226 || [20.0.0+] GetGameCardDetailedErrorReportInfo
|-
| 300 || [[#SetSpeedEmulationMode]]
|-
| 301 || [[#GetSpeedEmulationMode]]
|-
| 302 || [18.0.0+] [[#SetApplicationStorageSpeed]]
|-
| 303 || [20.0.0+] SetGameCardClockRateForSpeedEmulation
|-
| 304 || [20.0.0+] ClearGameCardClockRateForSpeedEmulation
|-
| 400 || [5.0.0+] [[#SuspendSdmmcControl]]
|-
| 401 || [5.0.0+] [[#ResumeSdmmcControl]]
|-
| 402 || [6.0.0+] [[#GetSdmmcConnectionStatus]]
|-
| 500 || [6.0.0+] [[#SetDeviceSimulationEvent]]
|-
| 501 || [6.0.0+] [[#ClearDeviceSimulationEvent]]
|}
|}


== Read ==
== IsSdCardInserted ==
Takes a type-0x46 buffer, an offset and length.
No input. Returns an output bool.
 
== GetSdCardSpeedMode ==
No input. Returns an output [[#SdCardSpeedMode]].
 
== GetSdCardCid ==
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.
 
== GetSdCardUserAreaSize ==
No input. Returns an output s64 '''SdCardUserAreaSize'''.
 
== GetSdCardProtectedAreaSize ==
No input. Returns an output s64 '''SdCardProtectedAreaSize'''.
 
== GetAndClearSdCardErrorInfo ==
Takes a type-0x6 output buffer '''LogBuffer''' and an input s64 '''LogBufferSize'''. Returns an output [[#StorageErrorInfo]] and an output s64 '''LogSize'''.
 
== GetSdCardHostControllerStatus ==
No input. Returns an output [[#HostControllerStatus]].


== Write ==
== GetMmcCid ==
Takes a type-0x45 buffer, an offset and length.
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.


== Flush ==
== GetMmcSpeedMode ==
No input.
No input. Returns an output [[#MmcSpeedMode]].


== SetSize ==
== EraseMmc ==
Takes a size.
Takes an input [[#MmcPartition]]. No output.


== GetSize ==
== GetMmcPartitionSize ==
Returns a size.
Takes an input [[#MmcPartition]]. Returns an output s64 '''MmcPartitionSize'''.


= IFileSystem =
== GetMmcPatrolCount ==
This is "nn::fssrv::sf::IFileSystem".
No input. Returns an output u32 '''MmcPatrolCount'''.


There are two main implementations of this interface:
== GetAndClearMmcErrorInfo ==
Takes a type-0x6 output buffer '''LogBuffer''' and an input s64 '''LogBufferSize'''. Returns an output [[#StorageErrorInfo]] and an output s64 '''LogSize'''.


* '''nn::fs::fsa::IFileSystem''': The main IFileSystem implementation. Filesystem classes implement this interface, and FS code usually operates on this interface.
== GetMmcExtendedCsd ==
* '''nn::fssrv::sf::IFileSystem''': Used for sending an IFileSystem over IPC. Not used outside of IPC code.
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.


There are two adapter classes to convert between these interfaces:
== SuspendMmcPatrol ==
No input/output.


* '''nn::fssrv::detail::FileSystemInterfaceAdapter''': Allows access to an nn::fs::fsa::IFileSystem via the nn::fssrv::sf::IFileSystem interface.
== ResumeMmcPatrol ==
* '''nn::fs::detail::FileSystemServiceObjectAdapter''': Allows access to an nn::fssrv::sf::IFileSystem via the nn::fs::fsa::IFileSystem interface.
No input/output.


When the FS process returns a filesystem, it will wrap the filesystem object in a FileSystemInterfaceAdapter to return it over IPC.
== EraseMmcWithRange ==
Then when FS application code receives that filesystem, it will wrap the nn::fssrv::sf::IFileSystem object in a FileSystemServiceObjectAdapter before using it.
Takes an input [[#MmcPartition]] and two input u64s. No output.


{| class="wikitable" border="1"
== IsGameCardInserted ==
|-
No input. Returns an output bool.
! Cmd || Name
|-
| 0 || CreateFile
|-
| 1 || DeleteFile
|-
| 2 || CreateDirectory
|-
| 3 || DeleteDirectory
|-
| 4 || DeleteDirectoryRecursively
|-
| 5 || RenameFile
|-
| 6 || RenameDirectory
|-
| 7 || [[#GetEntryType]]
|-
| 8 || [[#OpenFile]]
|-
| 9 || [[#OpenDirectory]]
|-
| 10 || [[#Commit]]
|-
| 11 || [[#GetFreeSpaceSize]]
|-
| 12 || [[#GetTotalSpaceSize]]
|-
| 13 || [3.0.0+] [[#CleanDirectoryRecursively]]
|-
| 14 || [3.0.0+] [[#GetFileTimeStampRaw]]
|-
| 15 || [4.0.0+] QueryEntry
|}


== GetEntryType ==
== EraseGameCard ==
Takes a type-0x9 input buffer for the path and returns [[#DirectoryEntryType]] as an output u32.
Takes an input [[#GameCardSize]] and an input u64 '''NormalAreaSize'''. No output.


== OpenFile ==
== GetGameCardHandle ==
Takes a type-0x19 input buffer for the path, and an u32 '''mode'''. '''mode''' controls how the file is opened, based on which bits are set:
No input. Returns an output [[#GameCardHandle]].


* When bit 0 is set, the file is Readable: you can use the Read operation.
== GetGameCardUpdatePartitionInfo ==
* When bit 1 is set, the file is Writable: you can use the Write operation.
Takes an input [[#GameCardHandle]]. Returns an output [[#GameCardUpdatePartitionInfo]].
* When bit 2 is set, the file is Appendable: unless this bit is set, you will not be able to write beyond the end of a file (such writes will result in an error 0x307202)


== OpenDirectory ==
== FinalizeGameCardDriver ==
Takes a type-0x9 input buffer for the path and an u64 '''filter_flags'''. '''filter_flags''' controls what type of entries are read by the [[#IDirectory]]: bitmask 0x1 = directories, bitmask 0x2 = files.
No input/output.


== Commit ==
== GetGameCardAttribute ==
Like [https://3dbrew.org/wiki/FS:ControlArchive 3DS], this has to be used after writing to savedata for the changes to take affect.
Takes an input [[#GameCardHandle]]. Returns an output [[#GameCardAttribute]].


== GetFreeSpaceSize ==
== GetGameCardDeviceCertificate ==
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total free space with this FS.
Takes a type-0x6 output buffer, an input s64 '''BufferSize''' and an input [[#GameCardHandle]]. No output.


== GetTotalSpaceSize ==
[19.0.0+] Now returns an output s64 '''OutSize''' which can be 0x200 or 0x400.
Takes a type-0x9 input buffer for the path and returns an output byte-size u64 for the total space available with this FS(free+used).


== CleanDirectoryRecursively ==
== GetGameCardAsicInfo ==
Takes a type-0x9 input buffer for the path and clears the contents of the directory specified in the path.
Takes a type-0x5 input buffer '''FwBuffer''', a type-0x6 output buffer containing [[#RmaInformation]] and two input s64s '''FwBufferSize''' and '''RmaInformationSize'''. No output.


== GetFileTimeStampRaw ==
== GetGameCardIdSet ==
Takes a type-0x19 input buffer for the path and returns a 0x20-byte struct. This contains 3 u64s and an u8.
Takes a type-0x6 output buffer containing a [[#GameCardIdSet]] and an input s64 '''BufferSize'''. No output.


= IDirectory =
== WriteToGameCardDirectly ==
This is "nn::fssrv::sf::IDirectory".
Takes a type-0x6 output buffer and two input s64s '''Offset''' and '''BufferSize'''. No output.


{| class="wikitable" border="1"
== SetVerifyWriteEnalbleFlag ==
|-
Takes an input bool. No output.
! Cmd || Name
|-
| 0 || [[#Read]]
|-
| 1 || [[#GetEntryCount]]
|}


== Read ==
== GetGameCardImageHash ==
Takes a type-0x6 output buffer. Returns an output u64(?) for the total number of read entries, this is 0 when no more entries are available.
Takes a type-0x6 output buffer, an input s64 '''BufferSize''' and an input [[#GameCardHandle]]. No output.


The output buffer contains the read array of [[#DirectoryEntry]]. This doesn't include entries for "." and "..".
== GetGameCardDeviceIdForProdCard ==
Takes a type-0x5 input buffer '''CardHeaderForDev''', a type-0x6 output buffer and two input s64s '''CardHeaderForDevSize''' and '''BufferSize'''. No output.


== GetEntryCount ==
== EraseAndWriteParamDirectly ==
Returns an u64 for the total number of readable entries.
Takes a type-0x5 input buffer and an input s64 '''BufferSize'''. No output.


= DirectoryEntry =
== ReadParamDirectly ==
This is "nn::fs::DirectoryEntry".
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.


{| class="wikitable" border="1"
== ForceEraseGameCard ==
|-
No input/output.
! Offset || Size || Description
|-
| 0x0 || 0x301 || Path
|-
| 0x301 || 0x1 || File attributes (bit 0 = is directory; bit 1 = archive bit)
|-
| 0x302 || 0x2 || Padding?
|-
| 0x304 || 0x1 || [[#DirectoryEntryType]]
|-
| 0x305 || 0x3 || Padding?
|-
| 0x308 || 0x8 || Filesize, 0 for directories.
|}


= DirectoryEntryType =
== GetGameCardErrorInfo ==
This is "nn::fs::DirectoryEntryType".
No input. Returns an output [[#GameCardErrorInfo]].


An s8 value indicating a directory entry type. The current values are:
== GetGameCardErrorReportInfo ==
No input. Returns an output [[#GameCardErrorReportInfo]].


{| class="wikitable" border="1"
== GetGameCardDeviceId ==
|-
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.
! Value || Description
|-
| 0 || Directory
|-
| 1 || File
|}


= IFile =
== ChallengeCardExistence ==
This is "nn::fssrv::sf::IFile".
Takes a type-0x6 output buffer, two type-0x5 input buffers and an input [[#GameCardHandle]]. No output.
 
[9.0.0+] The [[Account_services|account]] system module uses this as part of a new challenge-response mechanism for [[Network#aauth|application authentication]].


{| class="wikitable" border="1"
== GetGameCardCompatibilityType ==
|-
Takes an input [[#GameCardHandle]]. Returns an output [[#GameCardCompatibilityType]].
! Cmd || Name
|-
| 0 || Read
|-
| 1 || Write
|-
| 2 || Flush
|-
| 3 || SetSize
|-
| 4 || GetSize
|-
| 5 || [4.0.0+] OperateRange
|}


= ISaveDataInfoReader =
== GetGameCardAsicCertificate ==
This is "nn::fssrv::sf::ISaveDataInfoReader".
Takes a type-0x6 output buffer and an input s64 '''BufferSize'''. No output.


{| class="wikitable" border="1"
== GetGameCardCardHeader ==
|-
Takes a type-0x6 output buffer, an input s64 '''BufferSize''' and an input [[#GameCardHandle]]. No output.
! Cmd || Name
|-
| 0 || [[#ReadSaveDataInfo]]
|}


== ReadSaveDataInfo ==
== SetGameCardSessionCreationDelay ==
Takes a type-0x6 output buffer. Returns an output u64 for total output entries. This buffer contains an array of [[#SaveDataInfo]].
Takes two input bools and an input u32. No output.


This is used to get [[#SaveDataInfo]] for all savedata on the system (or all savedata for the current [[#SaveDataSpaceId]]). When used multiple times, it will resume reading where it left off, until no more entries are available (in that case the out u64 is value 0).
== GetGameCardApplicationIdList ==
Takes a type-0x6 output buffer, an input s64 '''BufferSize''' and an input [[#GameCardHandle]]. Returns an output u16.


= IDeviceOperator =
== SetSpeedEmulationMode ==
This is "nn::fssrv::sf::IDeviceOperator".
Takes an input [[#SpeedEmulationMode]]. No output.
 
== GetSpeedEmulationMode ==
No input. Returns an output [[#SpeedEmulationMode]].
 
== SetApplicationStorageSpeed ==
Takes an input s32. No output.
 
== SuspendSdmmcControl ==
No input/output.
 
== ResumeSdmmcControl ==
No input/output.
 
== GetSdmmcConnectionStatus ==
Takes a total of 4-bytes of input. Returns a total of 8-bytes of output.
 
== SetDeviceSimulationEvent ==
Takes a total of 0x14-bytes of input. No output.
 
== ClearDeviceSimulationEvent ==
Takes a total of 4-bytes of input. No output.
 
= IEventNotifier =
This is "nn::fssrv::sf::IEventNotifier".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 1,377: Line 1,367:
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || IsSdCardInserted
| 0 || [[#GetEventHandle]]
|}
 
== GetEventHandle ==
No input, returns an output Event handle. With official sw the EventClearMode is user-specified.
 
= ISaveDataTransferManager =
This is "nn::fssrv::sf::ISaveDataTransferManager".
 
This was added with [[4.0.0]].
 
{| class="wikitable" border="1"
|-
|-
| 1 || GetSdCardSpeedMode
! Cmd || Name
|-
|-
| 2 || [2.0.0+] GetSdCardCid
| 0 || [[#GetChallenge]]
|-
|-
| 3 || [2.0.0+] GetSdCardUserAreaSize
| 16 || [[#SetToken]]
|-
|-
| 4 || [2.0.0+] GetSdCardProtectedAreaSize
| 32 || [[#OpenSaveDataExporter]]
|-
|-
| 5 || [2.0.0+] GetAndClearSdCardErrorInfo
| 64 || [[#OpenSaveDataImporter]]
|}
 
== GetChallenge ==
No input/output, takes a type-0x6 output buffer.
 
== SetToken ==
No input/output, takes a type-0x5 input buffer.
 
== OpenSaveDataExporter ==
Takes an input u8 [[#SaveDataSpaceId]] and u64, returns an [[#ISaveDataExporter]].
 
== OpenSaveDataImporter ==
Takes an input u8 [[#SaveDataSpaceId]] and a 0x10-byte userID, and a type-0x5 input buffer. Returns an output u64 and an [[#ISaveDataImporter]].
 
= ISaveDataTransferManagerForSaveDataRepair =
This is "nn::fssrv::sf::ISaveDataTransferManagerForSaveDataRepair".
 
This was added with [[9.0.0]].
 
{| class="wikitable" border="1"
|-
|-
| 100 || GetMmcCid
! Cmd || Name
|-
|-
| 101 || GetMmcSpeedMode
| 0 || [[#GetChallenge]]
|-
|-
| 110 || EraseMmc
| 16 || [[#SetKeyPackage]]
|-
|-
| 111 || GetMmcPartitionSize
| 80 || [[#OpenSaveDataExporterAndGetEncryptedKey]]
|-
|-
| 112 || [2.0.0+] GetMmcPatrolCount
| 81 || [[#PrepareOpenSaveDataImporter]]
|-
|-
| 113 || [2.0.0+] GetAndClearMmcErrorInfo
| 90 || [[#OpenSaveDataImporter]]
|-
|-
| 114 || [2.0.0+] GetMmcExtendedCsd
| 91 || [[#OpenSaveDataImporter2]]
|-
|-
| 115 || [4.0.0+] SuspendMmcPatrol
| 100 || [[#OpenSaveDataExporterWithKey]]
|-
|-
| 116 || [4.0.0+] ResumeMmcPatrol
| 110 || [[#OpenSaveDataImporterWithKey]]
|-
|}
| 200 || [[#IsGameCardInserted]]
 
== SetKeyPackage ==
No input/output, takes a type-0x5 input buffer.
 
== OpenSaveDataExporterAndGetEncryptedKey ==
Takes a total of 0x10-bytes of input and a type-0x1A output buffer to receive a RsaEncryptedKey. Returns an [[#ISaveDataDivisionExporter]].
 
== PrepareOpenSaveDataImporter ==
Takes a type-0x1A output buffer to receive a RsaEncryptedKey.
 
== OpenSaveDataImporter ==
Takes a total of 0x18-bytes of input and two type-0x5 input buffers, returns an [[#ISaveDataDivisionImporter]].
 
== OpenSaveDataImporter2 ==
Takes a total of 0x18-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 
== OpenSaveDataExporterWithKey ==
Takes a total of 0x20-bytes of input, returns an [[#ISaveDataDivisionExporter]].
 
== OpenSaveDataImporterWithKey ==
Takes a total of 0x28-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 
[17.0.0+] Now only takes 0x18-bytes of input and an additional type-0x5 input buffer.
 
= ISaveDataMover =
This is "nn::fssrv::sf::ISaveDataMover".
 
This was added with [[10.0.0]].
 
{| class="wikitable" border="1"
|-
|-
| 201 || EraseGameCard
! Cmd || Name
|-
|-
| 202 || [[#GetGameCardHandle]]
| 8 || [[#Register]]
|-
|-
| 203 || [[#GetGameCardUpdatePartitionInfo]]
| 16 || [[#Process]]
|-
|-
| 204 || FinalizeGameCardDriver
| 18 || [[#Cancel]]
|}
 
== Register ==
Takes an input u64, no output.
 
== Process ==
Takes an input u64, returns an output u64.
 
== Cancel ==
No input/output.
 
= ISaveDataTransferManagerForRepair =
This is "nn::fssrv::sf::ISaveDataTransferManagerForRepair".
 
This was added with [[11.0.0]].
 
{| class="wikitable" border="1"
|-
|-
| 205 || GetGameCardAttribute
! Cmd || Name
|-
|-
| 206 || [[#GetGameCardDeviceCertificate]]
| 80 || [[#OpenSaveDataExporter]]
|-
|-
| 207 || GetGameCardAsicInfo
| 90 || [[#OpenSaveDataImporter]]
|}
 
== OpenSaveDataExporter ==
Takes a total of 0x10-bytes of input, returns an [[#ISaveDataDivisionExporter]].
 
== OpenSaveDataImporter ==
Takes 1-byte of input, a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 
= ISaveDataExporter =
This is "nn::fssrv::sf::ISaveDataExporter".
 
This was added with [[4.0.0]].
 
{| class="wikitable" border="1"
|-
|-
| 208 || GetGameCardIdSet
! Cmd || Name
|-
|-
| 209 || WriteToGameCardDirectly
| 0 || [[#GetSaveDataInfo]]
|-
|-
| 210 || SetVerifyWriteEnalbleFlag
| 1 || [[#GetRestSize]]
|-
|-
| 211 || GetGameCardImageHash
| 16 || [[#Pull]]
|-
|-
| 212 || [2.0.0+] GetGameCardDeviceIdForProdCard
| 17 || [[#PullInitialData]]
|}
 
== GetSaveDataInfo ==
No input/output, takes a type-0x1A [[#SaveDataInfo]] output buffer.
 
The actual name for this is the SaveDataExporter constructor. This is used automatically after [[#OpenSaveDataExporter]] by official sw.
 
== GetRestSize ==
No input, returns an output u64.
 
== Pull ==
Takes a type-0x6 output buffer, returns an output u64.
 
== PullInitialData ==
No input/output, takes a type-0x6 output buffer.
 
= ISaveDataImporter =
This is "nn::fssrv::sf::ISaveDataImporter".
 
This was added with [[4.0.0]].
 
{| class="wikitable" border="1"
|-
|-
| 213 || [2.0.0+] EraseAndWriteParamDirectly
! Cmd || Name
|-
|-
| 214 || [2.0.0+] ReadParamDirectly
| 0 || [[#GetSaveDataInfo]]
|-
|-
| 215 || [2.0.0+] ForceEraseGameCard
| 1 || [[#GetRestSize]]
|-
|-
| 216 || [2.0.0+] GetGameCardErrorInfo
| 16 || [[#Push]]
|-
|-
| 217 || [2.1.0+] GetGameCardErrorReportInfo
| 17 || [[#Finalize]]
|-
| 218 || [3.0.0+] GetGameCardDeviceId
|-
| 219 || [8.0.0+] [[#ChallengeCardExistence]]
|-
| 220 || [9.0.0+] [[#GetGameCardCompatibilityType]]
|-
| 300 || SetSpeedEmulationMode
|-
| 301 || GetSpeedEmulationMode
|-
| 400 || [5.0.0+] SuspendSdmmcControl
|-
| 401 || [5.0.0+] ResumeSdmmcControl
|-
| 402 || [6.0.0+] [[#GetSdmmcConnectionStatus]]
|-
| 500 || [6.0.0+] [[#SetDeviceSimulationEvent]]
|-
| 501 || [6.0.0+] [[#ClearDeviceSimulationEvent]]
|}
|}


== IsGameCardInserted ==
== GetSaveDataInfo ==
No input, returns a bool.
No input/output, takes a type-0x1A [[#GetSaveDataInfo]] output buffer.


== GetGameCardHandle ==
The actual name for this is the SaveDataImporter constructor. This is used automatically after [[#OpenSaveDataImporter]] by official sw.
No input, returns an u32 '''GameCardHandle'''.


== GetGameCardUpdatePartitionInfo ==
== GetRestSize ==
Returns a [[NCM_services#ProgramId|ProgramId]] and the title-version for it.
No input, returns an output u64.


* Output u32 with ARMS-gamecard: title-version v131162. This is the title-version for [[2.1.0]], which is the sysupdate included with this gamecard. Launch-day gamecards return title-version v450.
== Push ==
* Output u64 with ARMS-gamecard: [[NCM_services#ProgramId|ProgramId]] 0100000000000816.
No input/output, takes a type-0x5 input buffer.


[[NS_Services|NS]] appears to only use this with [[NCM_services|NCM]] for checking whether a sysupdate is required.
== Finalize ==
No input/output.


== GetGameCardDeviceCertificate ==
= ISaveDataTransferManagerWithDivision =
Takes a type-0x6 output buffer, an u32 '''GameCardHandle''' and an u64 '''DeviceCertificateBufferSize'''. No output.
This is "nn::fssrv::sf::ISaveDataTransferManagerWithDivision".


== ChallengeCardExistence ==
This was added with [[5.0.0]].
Takes a type-0x6 output buffer, two type-0x5 input buffers and an u32 '''GameCardHandle'''. No output.


[9.0.0+] The [[Account_services|account]] system module uses this as part of a new challenge-response mechanism for [[Network#aauth|application authentication]].
{| class="wikitable" border="1"
 
|-
== GetGameCardCompatibilityType ==
! Cmd || Name
Takes an u32 '''GameCardHandle''', returns an u8 '''CompatibilityType''' (0x00 = Global, 0x01 = China) from [[Gamecard_Format#Gamecard_Info|Gamecard Info]].
 
== GetSdmmcConnectionStatus ==
Takes a total of 4-bytes of input, returns a total of 8-bytes of output.
 
== SetDeviceSimulationEvent ==
Takes a total of 0x14-bytes of input, no output.
 
== ClearDeviceSimulationEvent ==
Takes a total of 4-bytes of input, no output.
 
= IEventNotifier =
This is "nn::fssrv::sf::IEventNotifier".
 
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
| 0 || [[#GetChallenge]]
|-
|-
| 0 || [[#GetEventHandle]]
| 8 || [18.0.0+] SetMode
|}
 
== GetEventHandle ==
No input, returns an output Event handle. With official sw the EventClearMode is user-specified.
 
= ISaveDataTransferManager =
This is "nn::fssrv::sf::ISaveDataTransferManager".
 
This was added with [[4.0.0]].
 
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
| 9 || [18.0.0+] SetAttribute
|-
|-
| 0 || [[#GetChallenge]]
| 16 || [[#SetKeySeedPackage]]
|-
|-
| 16 || [[#SetToken]]
| 17 || [20.0.0+] SetLocalKeySeedPackage
|-
|-
| 32 || [[#OpenSaveDataExporter]]
| 32 || [[#OpenSaveDataExporter]]
|-
|-
| 64 || [[#OpenSaveDataImporter]]
| 33 || [[#OpenSaveDataExporterForDiffExport]]
|-
| 34 || [6.0.0+] [[#OpenSaveDataExporterByContext]]
|-
| 63 || [17.0.0+] OpenSaveDataImporter
|-
| 64 || [6.0.0-17.0.1] [[#OpenSaveDataImporterDeprecated]] ([5.0.0-5.1.0] OpenSaveDataImporter)
|-
| 65 || [5.0.0-17.0.1] [[#OpenSaveDataImporterForDiffImport]]
|-
| 66 || [6.0.0-17.0.1] [[#OpenSaveDataImporterForDuplicateDiffImport]]
|-
| 67 || [6.0.0-16.1.0] [[#OpenSaveDataImporter]]
|-
| 68 || [6.0.0+] [[#OpenSaveDataImporterByContext]]
|-
| 69 || [6.0.0+] [[#CancelSuspendingImport]]
|-
| 70 || [10.0.0+] CancelSuspendingImportByAttribute
|-
| 80 || [11.0.0+] SwapSecondary
|}
|}


== GetChallenge ==
== GetChallenge ==
No input/output, takes a type-0x6 output buffer.
No input/output, takes a type-0x6 output buffer containing the '''Challenge'''.


== SetToken ==
== SetKeySeedPackage ==
No input/output, takes a type-0x5 input buffer.
No input/output, takes a type-0x5 input buffer containing the '''KeySeedPackage'''.


== OpenSaveDataExporter ==
== OpenSaveDataExporter ==
Takes an input u8 [[#SaveDataSpaceId]] and u64, returns an [[#ISaveDataExporter]].
Takes an input u8 [[#SaveDataSpaceId]] and u64. Returns an [[#ISaveDataDivisionExporter]].


== OpenSaveDataImporter ==
== OpenSaveDataExporterForDiffExport ==
Takes an input u8 [[#SaveDataSpaceId]] and a 0x10-byte userID, and a type-0x5 input buffer. Returns an output u64 and an [[#ISaveDataImporter]].
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionExporter]].


= ISaveDataTransferManagerForSaveDataRepair =
== OpenSaveDataExporterByContext ==
This is "nn::fssrv::sf::ISaveDataTransferManagerForSaveDataRepair".
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionExporter]].


This was added with [[9.0.0]].
== OpenSaveDataImporterDeprecated ==
Takes an input u8 [[#SaveDataSpaceId]], a 0x10-byte userID, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionImporter]].
 
== OpenSaveDataImporterForDiffImport ==
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]], returns an [[#ISaveDataDivisionImporter]].
 
== OpenSaveDataImporterForDuplicateDiffImport ==
Takes an input u8 and an u64, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 
== OpenSaveDataImporter ==
Takes an input u8, an u8(bool), a 0x10-byte struct, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 
== OpenSaveDataImporterByContext ==
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
 
== CancelSuspendingImport ==
Takes an input u64 and a 0x10-byte struct, no output.
 
= ISaveDataDivisionExporter =
This is "nn::fssrv::sf::ISaveDataDivisionExporter".
 
This was added with [[5.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 1,550: Line 1,647:
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || [[#GetChallenge]]
| 0 || [[#SetDivisionCount]]
|-
|-
| 16 || [[#SetKeyPackage]]
| 1 || [6.0.0+] [[#ReadSaveDataExtraData]]
|-
|-
| 80 || [[#OpenSaveDataExporterAndGetEncryptedKey]]
| 16 || [[#OpenSaveDataDiffChunkIterator]]
|-
|-
| 81 || [[#PrepareOpenSaveDataImporter]]
| 48 || [[#OpenSaveDataChunkExporter]]
|-
|-
| 90 || [[#OpenSaveDataImporter]]
| 64 || [6.0.0-8.1.0] [[#FinalizeFullExport]]
|-
|-
| 91 || [[#OpenSaveDataImporter2]]
| 65 || [6.0.0-8.1.0] [[#FinalizeDiffExport]]
|-
|-
| 100 || [[#OpenSaveDataExporterWithKey]]
| 66 || [6.0.0+] [[#CancelExport]]
|-
|-
| 110 || [[#OpenSaveDataImporterWithKey]]
| 67 || [6.0.0+] [[#SuspendExport]]
|-
| 70 || [6.0.0-17.0.1] [[#GetKeySeed]]
|-
| 71 || [6.0.0+] [[#GetInitialDataMac]]
|-
| 72 || [6.0.0+] [[#FinalizeExport]]
|-
| 73 || [9.0.0+] [[#GetInitialDataMacKeyGeneration]]
|-
| 74 || [18.0.0+] [[#GetKeySeed]]
|-
| 75 || [20.0.0+] GetLocalKeySeedPackage
|-
| 80 || [6.0.0+] [[#GetImportInitialDataAad]]
|-
| 81 || [6.0.0+] [[#SetExportInitialDataAad]]
|-
| 96 || [6.0.0+] [[#GetReportInfo]]
|}
|}


== SetKeyPackage ==
== SetDivisionCount ==
No input/output, takes a type-0x5 input buffer.
Takes an input u32, no output.


== OpenSaveDataExporterAndGetEncryptedKey ==
== OpenSaveDataChunkExporter ==
Takes a total of 0x10-bytes of input and a type-0x1A output buffer to receive a RsaEncryptedKey. Returns an [[#ISaveDataDivisionExporter]].
Takes an input u32, returns an [[#ISaveDataChunkExporter]].


== PrepareOpenSaveDataImporter ==
== FinalizeFullExport ==
Takes a type-0x1A output buffer to receive a RsaEncryptedKey.
No input, returns two 0x10-byte output structs.


== OpenSaveDataImporter ==
== FinalizeDiffExport ==
Takes a total of 0x18-bytes of input and two type-0x5 input buffers, returns an [[#ISaveDataDivisionImporter]].
No input, returns an output 0x10-byte struct.


== OpenSaveDataImporter2 ==
== CancelExport ==
Takes a total of 0x18-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
No input/output.
 
== SuspendExport ==
No input/output, takes a type-0x6 output buffer.
 
== GetKeySeed ==
No input, returns an output 0x10-byte struct.
 
== GetInitialDataMac ==
No input, returns an output 0x10-byte struct.


== OpenSaveDataExporterWithKey ==
== FinalizeExport ==
Takes a total of 0x20-bytes of input, returns an [[#ISaveDataDivisionExporter]].
No input/output.


== OpenSaveDataImporterWithKey ==
== SetExportInitialDataAad ==
Takes a total of 0x28-bytes of input and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
Takes an input 0x20-byte struct, no output.


= ISaveDataMover =
= ISaveDataDivisionImporter =
This is "nn::fssrv::sf::ISaveDataMover".
This is "nn::fssrv::sf::ISaveDataDivisionImporter".


This was added with [[10.0.0]].
This was added with [[5.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 1,597: Line 1,721:
! Cmd || Name
! Cmd || Name
|-
|-
| 8 || [[#Register]]
| 0 || [6.0.0+] [[#ReadSaveDataExtraData]]
|-
| 16 || [[#OpenSaveDataDiffChunkIterator]]
|-
|-
| 16 || [[#Process]]
| 32 || [[#InitializeImport]]
|-
|-
| 18 || [[#Cancel]]
| 33 || [[#FinalizeImport]]
|}
|-
 
| 34 || [6.0.0+] [[#CancelImport]]
== Register ==
|-
Takes an input u64, no output.
| 35 || [6.0.0+] [[#GetImportContext]]
 
|-
== Process ==
| 36 || [6.0.0+] [[#SuspendImport]]
Takes an input u64, returns an output u64.
|-
 
| 37 || [11.0.0+] FinalizeImportWithoutSwap
== Cancel ==
No input/output.
 
= IUnknown =
This was added with [[11.0.0]].
 
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
| 48 || [[#OpenSaveDataChunkImporter]]
|-
|-
| 80 ||  
| 64 || [6.0.0+] [[#GetImportInitialDataAad]]
|-
|-
| 90 ||  
| 80 || [6.0.0+] [[#GetReportInfo]]
|}
|}


Cmd80: Takes a total of 0x10-bytes of input, returns an [[#ISaveDataDivisionExporter]].
== ReadSaveDataExtraData ==
No input/output, takes a type-0x6 output buffer.


Cmd90: Takes 1-byte of input, a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
== OpenSaveDataDiffChunkIterator ==
No input, returns an [[#ISaveDataChunkIterator]].


= ISaveDataExporter =
== InitializeImport ==
This is "nn::fssrv::sf::ISaveDataExporter".
No input, returns an output u64.


This was added with [[4.0.0]].
== FinalizeImport ==
No input/output.
 
== CancelImport ==
No input/output.
 
== GetImportContext ==
No input/output, takes a type-0x6 output buffer.
 
== SuspendImport ==
No input/output.
 
== OpenSaveDataChunkImporter ==
Takes an input u32, returns an [[#ISaveDataChunkImporter]].
 
== GetImportInitialDataAad ==
No input, returns an output 0x20-byte struct.
 
== GetReportInfo ==
No input, returns an output 0x20-byte struct.
 
= ISaveDataChunkIterator =
This is "nn::fssrv::sf::ISaveDataChunkIterator".
 
This was added with [[5.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 1,638: Line 1,783:
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || [[#GetSaveDataInfo]]
| 0 || [[#Next]]
|-
|-
| 1 || [[#GetRestSize]]
| 1 || [[#IsEnd]]  
|-
|-
| 16 || [[#Pull]]
| 16 || [[#GetId]]  
|-
|}
| 17 || [[#PullInitialData]]
|}


== GetSaveDataInfo ==
== Next ==
No input/output, takes a type-0x1A [[#SaveDataInfo]] output buffer.
No input/output.


The actual name for this is the SaveDataExporter constructor. This is used automatically after [[#OpenSaveDataExporter]] by official sw.
== IsEnd ==
No input, returns an output u8.


== GetRestSize ==
== GetId ==
No input, returns an output u64.
No input, returns an output u32.


== Pull ==
= ISaveDataChunkExporter =
Takes a type-0x6 output buffer, returns an output u64.
This is "nn::fssrv::sf::ISaveDataChunkExporter".


== PullInitialData ==
This was added with [[5.0.0]].
No input/output, takes a type-0x6 output buffer.
 
= ISaveDataImporter =
This is "nn::fssrv::sf::ISaveDataImporter".
 
This was added with [[4.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 1,670: Line 1,808:
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || [[#GetSaveDataInfo]]
| 0 || [[#Pull]]
|-
|-
| 1 || [[#GetRestSize]]
| 16 || [6.0.0+] [[#GetRestRawDataSize]]
|-
|}
| 16 || [[#Push]]
 
|-
== Pull ==
| 17 || [[#Finalize]]
Takes an input u64 and a type-0x6 output buffer, returns an output u64.
|}


== GetSaveDataInfo ==
== GetRestRawDataSize ==
No input/output, takes a type-0x1A [[#GetSaveDataInfo]] output buffer.
 
The actual name for this is the SaveDataImporter constructor. This is used automatically after [[#OpenSaveDataImporter]] by official sw.
 
== GetRestSize ==
No input, returns an output u64.
No input, returns an output u64.


== Push ==
= ISaveDataChunkImporter =
No input/output, takes a type-0x5 input buffer.
This is "nn::fssrv::sf::ISaveDataChunkImporter".
 
== Finalize ==
No input/output.
 
= ISaveDataTransferManagerWithDivision =
This is "nn::fssrv::sf::ISaveDataTransferManagerWithDivision".


This was added with [[5.0.0]].
This was added with [[5.0.0]].
Line 1,702: Line 1,828:
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || [[#GetChallenge]]
| 0 || [[#Push]]
|-
|}
| 16 || [[#SetKeySeedPackage]]
 
|-
== Push ==
| 32 || [[#OpenSaveDataExporter]]
Takes an input u64 and a type-0x5 input buffer, no output.
 
= ISaveDataTransferProhibiter =
This is "nn::fssrv::sf::ISaveDataTransferProhibiter".
 
This was added with [6.0.0+].
 
This doesn't seem to handle any commands (?).
 
= IMultiCommitManager =
This is "nn::fssrv::sf::IMultiCommitManager".
 
This was added with [6.0.0+].
 
{| class="wikitable" border="1"
|-
|-
| 33 || [[#OpenSaveDataExporterForDiffExport]]
! Cmd || Name
|-
|-
| 34 || [6.0.0+] [[#OpenSaveDataExporterByContext]]
| 1 || [[#Add]]
|-
|-
|rowspan="2"| 64 || [5.0.0-5.1.0] OpenSaveDataImporter
| 2 || [[#Commit]]
|-
| [6.0.0+] [[#OpenSaveDataImporterDeprecated]]
|-
| 65 || [[#OpenSaveDataImporterForDiffImport]]
|-
| 66 || [6.0.0+] [[#OpenSaveDataImporterForDuplicateDiffImport]]
|-
| 67 || [6.0.0+] [[#OpenSaveDataImporter]]
|-
| 68 || [6.0.0+] [[#OpenSaveDataImporterByContext]]
|-
| 69 || [6.0.0+] [[#CancelSuspendingImport]]
|-
| 70 || [10.0.0+] DecryptAndVerifyInitialData
|-
| 80 || [11.0.0+]
|}
|}


== GetChallenge ==
== Add ==
No input/output, takes a type-0x6 output buffer containing the '''Challenge'''.
Takes an input [[#IFilesystem]], no output.


== SetKeySeedPackage ==
== Commit ==
No input/output, takes a type-0x5 input buffer containing the '''KeySeedPackage'''.
No input/output.


== OpenSaveDataExporter ==
= IWiper =
Takes an input u8 [[#SaveDataSpaceId]] and u64. Returns an [[#ISaveDataDivisionExporter]].
This is "nn::fssrv::sf::IWiper".


== OpenSaveDataExporterForDiffExport ==
This was added with [[10.0.0]].
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionExporter]].


== OpenSaveDataExporterByContext ==
{| class="wikitable" border="1"
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionExporter]].
|-
! Cmd || Name
|-
| 0 || [[#Startup|Startup]]
|-
| 16 || [[#Process_2|Process]]
|}


== OpenSaveDataImporterDeprecated ==
== Startup ==
Takes an input u8 [[#SaveDataSpaceId]], a 0x10-byte userID, and a type-0x5 input buffer [[#InitialDataVersion2]]. Returns an [[#ISaveDataDivisionImporter]].
No input. Returns an u64.


== OpenSaveDataImporterForDiffImport ==
== Process ==
Takes an input u8 [[#SaveDataSpaceId]], an u64, and a type-0x5 input buffer [[#InitialDataVersion2]], returns an [[#ISaveDataDivisionImporter]].
No input. Returns an u64.
 
== OpenSaveDataImporterForDuplicateDiffImport ==
Takes an input u8 and an u64, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].


== OpenSaveDataImporter ==
= IStorageDeviceManager =
Takes an input u8, an u8(bool), a 0x10-byte struct, and a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
This is "nn::fssrv::storage::sf::IStorageDeviceManager".


== OpenSaveDataImporterByContext ==
{| class="wikitable" border="1"
No input/output, takes a type-0x5 input buffer, returns an [[#ISaveDataDivisionImporter]].
|-
! Cmd || Name
|-
| N/A || IsInserted
|-
| N/A || IsHandleValid
|-
| N/A || OpenDetectionEvent
|-
| N/A || OpenOperator
|-
| N/A || OpenDevice
|-
| N/A || OpenStorage
|-
| N/A || Invalidate
|}


== CancelSuspendingImport ==
= IStorageDeviceOperator =
Takes an input u64 and a 0x10-byte struct, no output.
This is "nn::fssrv::storage::sf::IStorageDeviceOperator".
 
= ISaveDataDivisionExporter =
This is "nn::fssrv::sf::ISaveDataDivisionExporter".
 
This was added with [[5.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 1,773: Line 1,910:
! Cmd || Name
! Cmd || Name
|-
|-
| 0 || [[#SetDivisionCount]]
| N/A || Operate
|-
|-
| 1 || [6.0.0+] [[#GetSaveDataInfo]]
| N/A || OperateIn
|-
|-
| 16 || [[#OpenSaveDataDiffChunkIterator]]
| N/A || OperateOut
|-
|-
| 48 || [[#OpenSaveDataChunkExporter]]
| N/A || OperateOut2
|-
|-
| 64 || [6.0.0-8.1.0] [[#FinalizeFullExport]]
| N/A || OperateInOut
|-
|-
| 65 || [6.0.0-8.1.0] [[#FinalizeDiffExport]]
| N/A || OperateIn2Out
|}
 
= IStorageDevice =
This is "nn::fssrv::storage::sf::IStorageDevice".
 
{| class="wikitable" border="1"
|-
|-
| 66 || [6.0.0+] [[#CancelExport]]
! Cmd || Name
|-
|-
| 67 || [6.0.0+] [[#SuspendExport]]
| N/A || GetHandle
|-
|-
| 70 || [6.0.0+] [[#GetKeySeed]]
| N/A || IsHandleValid
|-
|-
| 71 || [6.0.0+] [[#GetInitialDataMac]]
| N/A || OpenOperator
|-
|-
| 72 || [6.0.0+] [[#FinalizeExport]]
| N/A || Read
|-
|-
| 73 || [9.0.0+] [[#GetInitialDataMacKeyGeneration]]
| N/A || Write
|-
|-
| 80 || [6.0.0+] [[#GetImportInitialDataAad]]
| N/A || Flush
|-
|-
| 81 || [6.0.0+] [[#SetExportInitialDataAad]]
| N/A || SetSize
|-
|-
| 96 || [6.0.0+] [[#GetReportInfo]]
| N/A || GetSize
|-
| N/A || OperateRange
|}
|}


== SetDivisionCount ==
= FileSystemProxyType =
Takes an input u32, no output.
This is "nn::fs::FileSystemProxyType".


== OpenSaveDataChunkExporter ==
{| class="wikitable" border="1"
Takes an input u32, returns an [[#ISaveDataChunkExporter]].
|-
! Value || Name
|-
| 0 || Code
|-
| 1 || Rom
|-
| 2 || Logo
|-
| 3 || Control
|-
| 4 || Manual
|-
| 5 || Meta
|-
| 6 || Data
|-
| 7 || Package
|-
| 8 || [4.0.0+] RegisteredUpdate
|}


== FinalizeFullExport ==
= ContentType =
No input, returns two 0x10-byte output structs.
This is "nn::fs::ContentType".
 
== FinalizeDiffExport ==
No input, returns an output 0x10-byte struct.
 
== CancelExport ==
No input/output.
 
== SuspendExport ==
No input/output, takes a type-0x6 output buffer.
 
== GetKeySeed ==
No input, returns an output 0x10-byte struct.
 
== GetInitialDataMac ==
No input, returns an output 0x10-byte struct.
 
== FinalizeExport ==
No input/output.
 
== SetExportInitialDataAad ==
Takes an input 0x20-byte struct, no output.
 
= ISaveDataDivisionImporter =
This is "nn::fssrv::sf::ISaveDataDivisionImporter".
 
This was added with [[5.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
! Value || Name
|-
|-
| 0 || [6.0.0+] [[#GetSaveDataInfo]]
| 0 || Meta
|-
|-
| 16 || [[#OpenSaveDataDiffChunkIterator]]
| 1 || Control
|-
|-
| 32 || [[#InitializeImport]]
| 2 || Manual
|-
| 3 || Logo
|-
| 4 || Data
|}
 
= ContentAttributes =
This is "nn::fs::ContentAttributes".
 
{| class="wikitable" border="1"
|-
|-
| 33 || [[#FinalizeImport]]
! Value || Name
|-
|-
| 34 || [6.0.0+] [[#CancelImport]]
| 0 || None
|-
|-
| 35 || [6.0.0+] [[#GetImportContext]]
| 15 || All
|}
 
= ContentStorageId =
This is "nn::fs::ContentStorageId".
 
{| class="wikitable" border="1"
|-
|-
| 36 || [6.0.0+] [[#SuspendImport]]
! Value || Name
|-
|-
| 37 || [11.0.0+]
| 0 || System
|-
|-
| 48 || [[#OpenSaveDataChunkImporter]]
| 1 || User
|-
|-
| 64 || [6.0.0+] [[#GetImportInitialDataAad]]
| 2 || SdCard
|-
|-
| 80 || [6.0.0+] [[#GetReportInfo]]
| 3 || [16.0.0+] System0
|}
|}


== GetSaveDataInfo ==
= SaveDataSpaceId =
No input/output, takes a type-0x6 output buffer.
This is "nn::fs::SaveDataSpaceId".


== OpenSaveDataDiffChunkIterator ==
{| class="wikitable" border="1"
No input, returns an [[#ISaveDataChunkIterator]].
|-
! Value || Name
|-
| 0 || System
|-
| 1 || User
|-
| 2 || SdSystem
|-
| 3 || [3.0.0+] Temporary
|-
| 4 || [4.0.0+] SdUser
|-
| 100 || [3.0.0+] ProperSystem
|-
| 101 || [3.0.0+] SafeMode
|}


== InitializeImport ==
Determines the storage where the savedata is stored.
No input, returns an output u64.


== FinalizeImport ==
= SaveDataType =
No input/output.
This is "nn::fs::SaveDataType".


== CancelImport ==
{| class="wikitable" border="1"
No input/output.
|-
 
! Value || Name
== GetImportContext ==
|-
No input/output, takes a type-0x6 output buffer.
| 0 || System
 
|-
== SuspendImport ==
| 1 || Account
No input/output.
 
== OpenSaveDataChunkImporter ==
Takes an input u32, returns an [[#ISaveDataChunkImporter]].
 
== GetImportInitialDataAad ==
No input, returns an output 0x20-byte struct.
 
== GetReportInfo ==
No input, returns an output 0x20-byte struct.
 
= ISaveDataChunkIterator =
This is "nn::fssrv::sf::ISaveDataChunkIterator".
 
This was added with [[5.0.0]].
 
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
| 2 || Bcat
|-
|-
| 0 || [[#Next]]
| 3 || Device
|-
|-
| 1 || [[#IsEnd]]  
| 4 || [3.0.0+] Temporary
|-
|-
| 16 || [[#GetId]]  
| 5 || [3.0.0+] Cache
|}
|-
| 6 || [4.0.0+] SystemBcat
|}


== Next ==
= SaveDataRank =
No input/output.
This is "nn::fs::SaveDataRank".
 
== IsEnd ==
No input, returns an output u8.
 
== GetId ==
No input, returns an output u32.
 
= ISaveDataChunkExporter =
This is "nn::fssrv::sf::ISaveDataChunkExporter".
 
This was added with [[5.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
! Value || Name
|-
|-
| 0 || [[#Pull]]
| 0 || Primary
|-
|-
| 16 || [6.0.0+] [[#GetRestRawDataSize]]
| 1 || Secondary
|}
|}


== Pull ==
= SaveDataEnumerateOption =
Takes an input u64 and a type-0x6 output buffer, returns an output u64.
This is "nn::fs::SaveDataEnumerateOption".


== GetRestRawDataSize ==
{| class="wikitable" border="1"
No input, returns an output u64.
|-
! Value || Name
|-
| 1 || AllRank
|}


= ISaveDataChunkImporter =
= SaveDataFlags =
This is "nn::fssrv::sf::ISaveDataChunkImporter".
This is "nn::fs::SaveDataFlags".
 
This was added with [[5.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
! Value || Name
|-
| 1 || KeepAfterResettingSystemSaveData
|-
| 2 || KeepAfterRefurbishment
|-
| 4 || KeepAfterResettingSystemSaveDataWithoutUserSaveData
|-
|-
| 0 || [[#Push]]
| 8 || NeedsSecureDelete
|}
|}


== Push ==
= SaveDataMetaType =
Takes an input u64 and a type-0x5 input buffer, no output.
This is "nn::fs::SaveDataMetaType".
 
= ISaveDataTransferProhibiter =
This was added with [[6.0.0]].
 
This doesn't seem to handle any commands (?).
 
= IMultiCommitManager =
This was added with [[6.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
! Value || Name
|-
|-
| 1 || [[#Add]]
| 0 || None
|-
|-
| 2 || [[#Commit]]
| 1 || Thumbnail
|-
| 2 || ExtensionContext
|}
|}


== Add ==
= ImageDirectoryId =
Takes an input [[#IFilesystem]], no output.
This is "nn::fs::ImageDirectoryId".
 
== Commit ==
No input/output.
 
= IWiper =
This is "nn::fs::IWiper".
 
This was added with [[10.0.0]].


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Cmd || Name
! Value || Name
|-
|-
| 0 || [[#Startup|Startup]]
| 0 || Nand
|-
|-
| 16 || [[#Process_2|Process]]
| 1 || SdCard
|}
|}


== Startup ==
= CloudBackupWorkStorageId =
No input. Returns an u64.
This is "nn::fs::CloudBackupWorkStorageId".
 
== Process ==
No input. Returns an u64.
 
= FileSystemProxyType =
This is "nn::fs::FileSystemProxyType".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,006: Line 2,138:
! Value || Name
! Value || Name
|-
|-
| 0 || Code
| 0 || Nand
|-
|-
| 1 || Rom
| 1 || SdCard
|}
 
= CustomStorageId =
This is "nn::fs::CustomStorageId".
 
{| class="wikitable" border="1"
|-
|-
| 2 || Logo
! Value || Name
|-
|-
| 3 || Control
| 0 || System
|-
|-
| 4 || Manual
| 1 || SdCard
|}
 
= Priority =
This is "nn::fs::Priority".
 
{| class="wikitable" border="1"
|-
|-
| 5 || Meta
! Value || Name
|-
|-
| 6 || Data
| 0 || Realtime
|-
|-
| 7 || Package
| 1 || Normal
|-
|-
| 8 || [4.0.0+] RegisteredUpdate
| 2 || Low
|}
|}


= ContentType =
= PriorityRaw =
This is "nn::fs::ContentType".
This is "nn::fs::PriorityRaw".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,032: Line 2,176:
! Value || Name
! Value || Name
|-
|-
| 0 || Meta
| 0 || Realtime
|-
|-
| 1 || Control
| 1 || Normal
|-
|-
| 2 || Manual
| 2 || Low
|-
|-
| 3 || Logo
| 3 || Background
|-
| 4 || Data
|}
|}


= ContentStorageId =
= AbortSpecifier =
This is "nn::fs::ContentStorageId".
This is "nn::fs::AbortSpecifier".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,050: Line 2,192:
! Value || Name
! Value || Name
|-
|-
| 0 || System
| 0 || Default
|-
|-
| 1 || User
| 1 || Abort
|-
|-
| 2 || SdCard
| 2 || ReturnResult
|}
|}


= SaveDataSpaceId =
= OperationId =
This is "nn::fs::SaveDataSpaceId".
This is "nn::fs::OperationId".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,064: Line 2,206:
! Value || Name
! Value || Name
|-
|-
| 0 || System
| 0 || Clear
|-
|-
| 1 || User
| 1 || ClearSignature
|-
|-
| 2 || SdSystem
| 2 || InvalidateCache
|-
|-
| 3 || [3.0.0+] Temporary
| 3 || QueryRange
|-
|}
| 4 || [4.0.0+] SdUser
 
= MountHostOption =
This is "nn::fs::MountHostOption".
 
{| class="wikitable" border="1"
|-
|-
| 100 || [3.0.0+] ProperSystem
! Value || Name
|-
|-
| 101 || [3.0.0+] SafeMode
| 1 || PseudoCaseSensitive
|}
|}


Determines the storage where the savedata is stored.
= BisPartitionId =
 
This is "nn::fs::BisPartitionId".
= SaveDataType =
This is "nn::fs::SaveDataType".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,088: Line 2,232:
! Value || Name
! Value || Name
|-
|-
| 0 || System
| 0 || BootPartition1Root
|-
| 10 || BootPartition2Root
|-
|-
| 1 || Account
| 20 || UserDataRoot
|-
|-
| 2 || Bcat
| 21 || BootConfigAndPackage2Part1
|-
|-
| 3 || Device
| 22 || BootConfigAndPackage2Part2
|-
|-
| 4 || [3.0.0+] Temporary
| 23 || BootConfigAndPackage2Part3
|-
|-
| 5 || [3.0.0+] Cache
| 24 || BootConfigAndPackage2Part4
|-
|-
| 6 || [4.0.0+] SystemBcat
| 25 || BootConfigAndPackage2Part5
|}
|-
 
| 26 || BootConfigAndPackage2Part6
= SaveDataRank =
|-
This is "nn::fs::SaveDataRank".
| 27 || CalibrationBinary
 
|-
{| class="wikitable" border="1"
| 28 || CalibrationFile
|-
| 29 || SafeMode
|-
| 30 || User
|-
| 31 || System
|-
|-
! Value || Name
| 32 || SystemProperEncryption
|-
|-
| 0 || Primary
| 33 || SystemProperPartition
|-
|-
| 1 || Secondary
| 34 || SignedSystemPartitionOnSafeMode
|}
 
= SaveDataEnumerateOption =
This is "nn::fs::SaveDataEnumerateOption".
 
{| class="wikitable" border="1"
|-
|-
! Value || Name
| 35 || [16.0.0+] DeviceTreeBlob
|-
|-
| 1 || AllRank
| 36 || [16.0.0+] System0
|}
|}


= SaveDataFlags =
= SdCardSpeedMode =
This is "nn::fs::SaveDataFlags".
This is "nn::fs::SdCardSpeedMode".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,132: Line 2,278:
! Value || Name
! Value || Name
|-
|-
| 1 || KeepAfterResettingSystemSaveData
| 0 || Identification
|-
| 1 || DefaultSpeed
|-
| 2 || HighSpeed
|-
| 3 || Sdr12
|-
| 4 || Sdr25
|-
| 5 || Sdr50
|-
|-
| 2 || KeepAfterRefurbishment
| 6 || Sdr104
|-
|-
| 4 || KeepAfterResettingSystemSaveDataWithoutUserSaveData
| 7 || Ddr50
|-
|-
| 8 || NeedsSecureDelete
| 8 || Unknown
|}
|}


= SaveDataMetaType =
= MmcSpeedMode =
This is "nn::fs::SaveDataMetaType".
This is "nn::fs::MmcSpeedMode".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,148: Line 2,304:
! Value || Name
! Value || Name
|-
|-
| 0 || None
| 0 || Identification
|-
| 1 || LegacySpeed
|-
| 2 || HighSpeed
|-
| 3 || Hs200
|-
|-
| 1 || Thumbnail
| 4 || Hs400
|-
|-
| 2 || ExtensionContext
| 5 || Unknown
|}
|}


= ImageDirectoryId =
= MmcPartition =
This is "nn::fs::ImageDirectoryId".
This is "nn::fs::MmcPartition".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,162: Line 2,324:
! Value || Name
! Value || Name
|-
|-
| 0 || Nand
| 0 || UserData
|-
|-
| 1 || SdCard
| 1 || BootPartition1
|-
| 2 || BootPartition2
|}
|}


= CloudBackupWorkStorageId =
= HostControllerStatus =
This is "nn::fs::CloudBackupWorkStorageId".
This is "nn::sdcard::HostControllerStatus".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
|-
| 0 || Nand
| 0x0
|-
| 0xC
| 1 || SdCard
|  
|}
|}


= CustomStorageId =
= MemoryReportInfo =
This is "nn::fs::CustomStorageId".
This is "nn::fs::MemoryReportInfo".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
|-
| 0 || System
| 0x0
| 0x8
| PooledBufferFreeSizePeak
|-
|-
| 1 || SdCard
| 0x8
|}
| 0x8
 
| PooledBufferRetriedCount
= Priority =
This is "nn::fs::Priority".
 
{| class="wikitable" border="1"
|-
|-
! Value || Name
| 0x10
| 0x8
| PooledBufferReduceAllocationCount
|-
|-
| 0 || Realtime
| 0x18
| 0x8
| BufferManagerFreeSizePeak
|-
| 0x20
| 0x8
| BufferManagerRetriedCount
|-
| 0x28
| 0x8
| ExpHeapFreeSizePeak
|-
|-
| 1 || Normal
| 0x30
| 0x8
| BufferPoolFreeSizePeak
|-
|-
| 2 || Low
| 0x38
|}
| 0x8
 
| PatrolReadAllocateBufferSuccessCount
= PriorityRaw =
This is "nn::fs::PriorityRaw".
 
{| class="wikitable" border="1"
|-
|-
! Value || Name
| 0x40
| 0x8
| PatrolReadAllocateBufferFailureCount
|-
|-
| 0 || Realtime
| 0x48
| 0x8
| BufferManagerTotalAllocatableSizePeak
|-
|-
| 1 || Normal
| 0x50
| 0x8
| BufferPoolAllocateSizeMax
|-
|-
| 2 || Low
| 0x58
| 0x8
| PooledBufferFailedIdealAllocationCountOnAsyncAccess
|-
|-
| 3 || Background
| 0x60
| 0x20
| Reserved
|}
|}


= AbortSpecifier =
= StorageErrorInfo =
This is "nn::fs::AbortSpecifier".
This is "nn::fs::StorageErrorInfo".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
| 0x0
| 0x4
| NumActivationFailures
|-
|-
| 0 || Default
| 0x4
| 0x4
| NumActivationErrorCorrections
|-
|-
| 1 || Abort
| 0x8
| 0x4
| NumReadWriteFailures
|-
|-
| 2 || ReturnResult
| 0xC
| 0x4
| NumReadWriteErrorCorrections
|}
|}


= OperationId =
= GameCardErrorInfo =
This is "nn::fs::OperationId".
This is "nn::fs::GameCardErrorInfo".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
|-
| 0 || Clear
| 0x0
| 0x2
| GameCardCrcErrorCount
|-
|-
| 1 || ClearSignature
| 0x2
| 0x2
| Reserved
|-
|-
| 2 || InvalidateCache
| 0x4
| 0x2
| AsicCrcErrorCount
|-
|-
| 3 || QueryRange
| 0x6
|}
| 0x2
 
| Reserved
= MountHostOption =
|-
This is "nn::fs::MountHostOption".
| 0x8
 
| 0x2
{| class="wikitable" border="1"
| RefreshCount
|-
| 0xA
| 0x2
| Reserved
|-
|-
! Value || Name
| 0xC
| 0x2
| ReadRetryCount
|-
|-
| 1 || PseudoCaseSensitive
| 0xE
| 0x2
| TimeoutRetryErrorCount
|}
|}


= BisPartitionId =
= GameCardErrorReportInfo =
This is "nn::fs::BisPartitionId".
This is "nn::fs::GameCardErrorReportInfo".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
|-
| 0 || BootPartition1Root
| 0x0
| 0x10
| [[#GameCardErrorInfo|ErrorInfo]]
|-
|-
| 10 || BootPartition2Root
| 0x10
| 0x2
| AsicReinitializeFailureDetail
|-
|-
| 20 || UserDataRoot
| 0x12
| 0x2
| InsertionCount
|-
|-
| 21 || BootConfigAndPackage2Part1
| 0x14
| 0x2
| RemovalCount
|-
|-
| 22 || BootConfigAndPackage2Part2
| 0x16
| 0x2
| AsicReinitializeCount
|-
|-
| 23 || BootConfigAndPackage2Part3
| 0x18
| 0x4
| AsicInitializeCount
|-
|-
| 24 || BootConfigAndPackage2Part4
| 0x1C
| 0x2
| AsicReinitializeFailureCount
|-
|-
| 25 || BootConfigAndPackage2Part5
| 0x1E
| 0x2
| AwakenFailureCount
|-
|-
| 26 || BootConfigAndPackage2Part6
| 0x20
| 0x2
| Reserved
|-
|-
| 27 || CalibrationBinary
| 0x22
| 0x2
| RefreshCount
|-
|-
| 28 || CalibrationFile
| 0x24
| 0x4
| LastReadErrorPageAddress
|-
|-
| 29 || SafeMode
| 0x28
| 0x4
| LastReadErrorPageCount
|-
|-
| 30 || User
| 0x2C
| 0x4
| AwakenCount
|-
|-
| 31 || System
| 0x30
| 0x4
| ReadCountFromInsert
|-
|-
| 32 || SystemProperEncryption
| 0x34
| 0x4
| ReadCountFromAwaken
|-
|-
| 33 || SystemProperPartition
| 0x38
|-
| 0x8
| 34 || SignedSystemPartitionOnSafeMode
| Reserved
|}
|}


= MmcSpeedMode =
= GameCardHandle =
This is "nn::fs::MmcSpeedMode".
This is "nn::fs::GameCardHandle". This is an u32.
 
= GameCardPartition =
This is "nn::fs::GameCardPartition".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,310: Line 2,559:
! Value || Name
! Value || Name
|-
|-
| 0 || Identification
| 0 || Update
|-
|-
| 1 || LegacySpeed
| 1 || Normal
|-
|-
| 2 || HighSpeed
| 2 || Secure
|-
|-
| 3 || Hs200
| 3 || [4.0.0+] Logo
|-
| 4 || Hs400
|-
| 5 || Unknown
|}
|}


= MmcPartition =
= GameCardPartitionRaw =
This is "nn::fs::MmcPartition".
This is "nn::fs::GameCardPartitionRaw".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,330: Line 2,575:
! Value || Name
! Value || Name
|-
|-
| 0 || UserData
| 0 || NormalReadOnly
|-
|-
| 1 || BootPartition1
| 1 || SecureReadOnly
|-
|-
| 2 || BootPartition2
| 2 || RootWriteOnly
|}
|}


= GameCardPartition =
= GameCardAttribute =
This is "nn::fs::GameCardPartition".
This is "nn::fs::GameCardAttribute".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,344: Line 2,589:
! Value || Name
! Value || Name
|-
|-
| 0 || Update
| 1 || AutoBootFlag
|-
| 1 || Normal
|-
| 2 || Secure
|-
| 3 || [4.0.0+] Logo
|}
 
= GameCardPartitionRaw =
This is "nn::fs::GameCardPartitionRaw".
 
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 || NormalReadOnly
|-
| 1 || SecureReadOnly
|-
| 2 || RootWriteOnly
|}
 
= GameCardAttribute =
This is "nn::fs::GameCardAttribute".
 
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 1 || AutoBootFlag
|-
|-
| 2 || HistoryEraseFlag
| 2 || HistoryEraseFlag
Line 2,384: Line 2,599:
| 16 || [9.0.0+] DifferentRegionCupToGlobalDeviceFlag
| 16 || [9.0.0+] DifferentRegionCupToGlobalDeviceFlag
|}
|}
= GameCardAttribute2 =
This is "nn::fs::GameCardAttribute2".


= GameCardSize =
= GameCardSize =
Line 2,417: Line 2,635:
|}
|}


= SimulatingDeviceType =
= GameCardCompatibilityType =
This is "nn::fs::SimulatingDeviceType".
This is "nn::fs::GameCardCompatibilityType".
 
 
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Value || Name
|-
|-
| 0 || eMMC
| 0 || Global
|-
|-
| 1 || SdCard
| 1 || China
|-
| 2 || GameCard
|}
|}


= SimulatingDeviceDetectionMode =
= GameCardUpdatePartitionInfo =
This is "nn::fs::SimulatingDeviceDetectionMode".
This is "nn::fs::GameCardUpdatePartitionInfo".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
|-
| 0 || NoSimulation
| 0x0
| 0x4
| Version
|-
|-
| 1 || DeviceAttached
| 0x4
| 0x4
| Reserved
|-
|-
| 2 || DeviceRemoved
| 0x8
| 0x8
| Id
|}
|}


= SimulatingDeviceAccessFailureEventType =
= GameCardIdSet =
This is "nn::fs::SimulatingDeviceAccessFailureEventType".
This is "nn::gc::GameCardIdSet".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
|-
| 0 || None
| 0x0
| 0x4
| [[#CardId1|Id1]]
|-
|-
| 1 || AccessTimeoutFailure
| 0x4
| 0x4
| [[#CardId2|Id2]]
|-
|-
| 2 || AccessFailure
| 0x8
|-
| 0x4
| 3 || DataCorruption
| [[#CardId3|Id3]]
|}
|}


= SimulatingDeviceTargetOperation =
= CardId1 =
This is "nn::fs::SimulatingDeviceTargetOperation".
This is "nn::gc::detail::CardId1".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
| 0x0
| 0x1
| [[#MakerCodeForCardId1|MakerCode]]
|-
| 0x1
| 0x1
| [[#MemoryCapacity|MemoryCapacity]]
|-
|-
| 1 || Read
| 0x2
| 0x1
| Reserved
|-
|-
| 2 || Write
| 0x3
| 0x1
| [[#MemoryType|MemoryType]]
|}
|}


= SpeedEmulationMode =
= CardId2 =
This is "nn::fs::SpeedEmulationMode".
This is "nn::gc::detail::CardId2".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Value || Name
! Offset
! Size
! Description
|-
|-
| 0 || None
| 0x0
| 0x1
| [[#CardSecurityNumber|CardSecurityNumber]]
|-
|-
| 1 || Faster
| 0x1
| 0x1
| [[#CardType|CardType]]
|-
| 0x2
| 0x2
| Reserved
|}
 
= CardId3 =
This is "nn::gc::detail::CardId3".
 
{| class="wikitable" border="1"
|-
|-
| 2 || Slower
! Offset
! Size
! Description
|-
|-
| 3 || Random
| 0x0
| 0x4
| Reserved
|}
|}


= ContentPath =
= MakerCodeForCardId1 =
These are the 0x300 paths to NCA files for the various filesystems FS can access, beginning with @. They're passed via X descriptors, and returned via various [[Location Resolver services|ncm/lr]] commands.
This is "nn::gc::detail::MakerCodeForCardId1".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Path || Notes
! Value || Name
|-
|-
| @SystemContent ||
| 0xC2 || MegaChips
|-
| @UserContent ||
|-
|-
| @SdCardContent ||
| 0xAE || Lapis
|-
|-
| @CalibFile ||
| 0x36 ||  
|}
 
= MemoryCapacity =
This is "nn::gc::detail::MemoryCapacity".
 
{| class="wikitable" border="1"
|-
|-
| @Safe ||
! Value || Name
|-
|-
| @User ||
| 0xFA || 1GB
|-
|-
| @System ||
| 0xF8 || 2GB
|-
|-
| @Sdcard ||
| 0xF0 || 4GB
|-
|-
| @Host ||
| 0xE0 || 8GB
|-
|-
| @GcApp || Gamecard App partition (Partition 2)
| 0xE1 || 16GB
|-
|-
| @GcXYYYYYYYY || Gamecard Contents. X is the partition type (U - Update, N - Normal, S - Secure). Y is the gamecard handle as a 32-bit hex value
| 0xE2 || 32GB
|-
| @upp || Gamecard update partition (Partition 0)
|-
| [4.0.0+] @RegUpdate || Registered update partition
|}
|}


= SaveDataAttribute =
= MemoryType =
This is "nn::fs::SaveDataAttribute".
This is "nn::gc::detail::MemoryType".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Offset
! Value || Name
! Size
! Description
|-
|-
| 0x0
| 0x1 || T1RomFast
| 0x8
| [[NCM_services#ApplicationId|ApplicationId]] (0 for SystemSaveData)</br>SaveData: 0 can be used for accessing the savedata associated with the current FS session [[NCM_services#ApplicationId|ApplicationId]], otherwise when set this is the [[NCM_services#ApplicationId|ApplicationId]] associated with the savedata to access.
|-
|-
| 0x8
| 0x2 || T2RomFast
| 0x10
| UserId</br>For user-specific savedata(saveuser) when set, otherwise when zero this indicates the common savedata(savecommon). This is loaded from [[Account_services]].
|-
|-
| 0x18
| 0x9 || T1NandFast
| 0x8
| [[Flash_Filesystem|SystemSaveDataId]] (0 for SaveData)
|-
|-
| 0x20
| 0xA || T2NandFast
| 0x1
| [[#SaveDataType]]
|-
|-
| 0x21
| 0x21 || T1RomLate
| 0x1
| [[#SaveDataRank]]
|-
|-
| 0x22
| 0x22 || T2RomLate
| 0x2
| SaveDataIndex
|-
|-
| 0x24
| 0x29 || T1NandLate
| 0x4
| Padding
|-
|-
| 0x28
| 0x2A || T2NandLate
| 0x8
|}
| 0 for SystemSaveData/SaveData.
 
= CardSecurityNumber =
This is "nn::gc::detail::CardSecurityNumber".
 
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 || 0
|-
| 1 || 1
|-
| 2 || 2
|-
|-
| 0x30
| 3 || 3
| 0x8
| 0 for SystemSaveData/SaveData.
|-
|-
| 0x38
| 4 || 4
| 0x8
| 0 for SystemSaveData/SaveData.
|}
|}


Total size is 0x40-bytes.
= CardType =
This is "nn::gc::detail::CardType".
 
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 || Rom
|-
| 1 || WritableDevT1
|-
| 2 || WritableProdT1
|-
| 3 || WritableDevT2
|-
| 4 || WritableProdT2
|}


For DeviceSaveData, this struct is all-zero except for the [[#SaveDataType]] field (and optionally the ApplicationId if specified).
= RmaInformation =
This is "nn::gc::RmaInformation". This is a 0x200-byte struct.


= SaveDataCreationInfo =
= GameCardCardHeader =
This is "nn::fs::SaveDataCreationInfo".
This is a 0x600-byte struct.


{| class="wikitable" border="1"
{| class="wikitable" border="1"
Line 2,587: Line 2,860:
|-
|-
| 0x0
| 0x0
| 0x8
| 0x100
| SaveDataSize
| [[XCI#CardHeader|Signature]]
|-
| 0x100
| 0x100
| [[Lotus3#GetCardHeader|Header]]
|-
|-
| 0x8
| 0x200
| 0x8
| 0x400
| JournalSize
| [[XCI#NewCardHeaderCertArea|NewCardHeaderCertArea]]
|-
| 0x10
| 0x8
| AvailableSize</br>0x4000 for SystemSaveData/SaveData/DeviceSaveData/BcatSaveData.
|-
| 0x18
| 0x8
| OwnerId</br>Official user-processes only uses 0 here for SystemSaveData/SaveData. For the dedicated save-creation code with SaveData/DeviceSaveData, this value comes from an input param with official user-processes. For BcatSaveData, this is the hard-coded [[NCM_services#ProgramId|ProgramId]] of the bcat-sysmodule.
|-
| 0x20
| 0x4
| [[#SaveDataFlags]]</br>Written using an input param for official user-processes. Hard-coded 0 for BcatSaveData.
|-
| 0x24
| 0x1
| [[#SaveDataSpaceId]]</br>Official user-processes only uses 0 here for SystemSaveData, 1 for SaveData/DeviceSaveData/BcatSaveData.
|-
| 0x25
| 0x1
| Unknown. 0 for SystemSaveData/SaveData.
|-
| 0x26
| 0x1A
| Not initialized for SystemSaveData/SaveData.
|}
|}


Total size is 0x40-bytes.
= GameCardAsicProductionFirmware =
This is the [[Lotus3#AsicFirmware|firmware]] for reading production Gamecards.
 
Embedded in "nn::gc::detail::EmbeddedDataHolder::g_FwReadBuffer" when in production mode.


= DeviceSaveData =
[4.0.0+] This firmware was updated to provide support for new Gamecards.
This is accessed using the same commands for SaveData with the same input u8, the only difference compared to SaveData is the [[#SaveDataAttribute]].


= BcatSaveData =
[9.0.0+] This firmware was updated.
This is accessed using the same commands for SaveData with the same input u8. The [[#SaveDataAttribute]] is the same as DeviceSaveData (besides the SaveDataType), except that the [[NCM_services#ApplicationId|ApplicationId]] field is always set to <input ApplicationId> (unlike DeviceSaveData where it's optional). See above regarding [[#SaveDataCreationInfo]].
 
[11.0.0+] This firmware was updated.
 
[12.0.0+] This firmware was updated.
 
[14.0.0+] This firmware was updated.
 
= GameCardAsicDevelopmentFirmware =
This is the [[Lotus3#AsicFirmware|firmware]] for reading development Gamecards.
 
Embedded in "nn::gc::detail::EmbeddedDataHolder::g_FwReadBuffer" when in development mode.
 
[9.0.0+] This firmware was updated.
 
[11.0.0+] This firmware was updated.
 
[14.0.0+] This firmware was updated.


The 0x10-byte struct passed to [[#CreateSaveDataFileSystem]] has the first 0x5-bytes set to all-zero.
= GameCardAsicWriterFirmware =
This is the [[Lotus3#AsicFirmware|firmware]] for writing development Gamecards.


MountSystemBcatSaveData uses [[#OpenSaveDataFileSystemBySystemSaveDataId]] with [[#SaveDataSpaceId]] System. The [[#SaveDataAttribute]] is all-zero, except for the SaveDataType, and SystemSaveDataId is set to the input param.
Embedded in "nn::gc::detail::EmbeddedDataHolder::g_FwWriterBuffer".


= SaveDataInfo =
= SimulatingDeviceType =
This is "nn::fs::SaveDataInfo".
This is "nn::fs::SimulatingDeviceType".


{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Offset
! Value || Name
! Size
! Description
|-
|-
| 0x0
| 0 || eMMC
| 0x8
| SaveDataId
|-
|-
| 0x8
| 1 || SdCard
| 0x1
| [[#SaveDataSpaceId]]
|-
|-
| 0x9
| 2 || GameCard
| 0x1
|}
| [[#SaveDataType]]
 
= SimulatingDeviceDetectionMode =
This is "nn::fs::SimulatingDeviceDetectionMode".
 
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 || NoSimulation
|-
| 1 || DeviceAttached
|-
| 2 || DeviceRemoved
|}
 
= SimulatingDeviceAccessFailureEventType =
This is "nn::fs::SimulatingDeviceAccessFailureEventType".
 
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 || None
|-
| 1 || AccessTimeoutFailure
|-
|-
| 0xA
| 2 || AccessFailure
| 0x6
| Padding?
|-
|-
| 3 || DataCorruption
|}
= SimulatingDeviceTargetOperation =
This is "nn::fs::SimulatingDeviceTargetOperation".
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 1 || Read
|-
| 2 || Write
|}
= SpeedEmulationMode =
This is "nn::fs::SpeedEmulationMode".
{| class="wikitable" border="1"
|-
! Value || Name
|-
| 0 || None
|-
| 1 || Faster
|-
| 2 || Slower
|-
| 3 || Random
|}
= FspPath =
This is "nn::fssrv::sf::FspPath". This is a 0x301-byte string.
{| class="wikitable" border="1"
|-
! Path || Notes
|-
| @SystemContent ||
|-
| @UserContent ||
|-
| @SdCardContent ||
|-
| @CalibFile ||
|-
| @Safe ||
|-
| @User ||
|-
| @System ||
|-
| @Sdcard ||
|-
| @Host ||
|-
| @GcApp || Gamecard App partition (Partition 2)
|-
| @GcXYYYYYYYY || Gamecard Contents. X is the partition type (U - Update, N - Normal, S - Secure). Y is the gamecard handle as a 32-bit hex value
|-
| @upp || Gamecard update partition (Partition 0)
|-
| [4.0.0+] @RegUpdate || Registered update partition
|}
= SaveDataAttribute =
This is "nn::fs::SaveDataAttribute".
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0
| 0x8
| [[NCM_services#ApplicationId|ApplicationId]] (0 for SystemSaveData)</br>SaveData: 0 can be used for accessing the savedata associated with the current FS session [[NCM_services#ApplicationId|ApplicationId]], otherwise when set this is the [[NCM_services#ApplicationId|ApplicationId]] associated with the savedata to access.
|-
| 0x8
| 0x10
| 0x10
| 0x10
| UserId</br>For user-specific savedata(saveuser) when set, otherwise when zero this indicates the common savedata(savecommon). This is loaded from [[Account_services]].
| UserId
|-
| 0x18
| 0x8
| [[Flash_Filesystem|SystemSaveDataId]] (0 for SaveData)
|-
| 0x20
| 0x1
| [[#SaveDataType]]
|-
| 0x21
| 0x1
| [[#SaveDataRank]]
|-
| 0x22
| 0x2
| SaveDataIndex
|-
| 0x24
| 0x4
| Padding
|-
| 0x28
| 0x8
| 0 for SystemSaveData/SaveData.
|-
| 0x30
| 0x8
| 0 for SystemSaveData/SaveData.
|-
| 0x38
| 0x8
| 0 for SystemSaveData/SaveData.
|}
 
Total size is 0x40-bytes.
 
For DeviceSaveData, this struct is all-zero except for the [[#SaveDataType]] field (and optionally the ApplicationId if specified).
 
= SaveDataCreationInfo =
This is "nn::fs::SaveDataCreationInfo".
 
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0
| 0x8
| SaveDataSize
|-
| 0x8
| 0x8
| JournalSize
|-
| 0x10
| 0x8
| AvailableSize</br>0x4000 for SystemSaveData/SaveData/DeviceSaveData/BcatSaveData.
|-
| 0x18
| 0x8
| OwnerId</br>Official user-processes only uses 0 here for SystemSaveData/SaveData. For the dedicated save-creation code with SaveData/DeviceSaveData, this value comes from an input param with official user-processes. For BcatSaveData, this is the hard-coded [[NCM_services#ProgramId|ProgramId]] of the bcat-sysmodule.
|-
| 0x20
| 0x4
| [[#SaveDataFlags]]</br>Written using an input param for official user-processes. Hard-coded 0 for BcatSaveData.
|-
| 0x24
| 0x1
| [[#SaveDataSpaceId]]</br>Official user-processes only uses 0 here for SystemSaveData, 1 for SaveData/DeviceSaveData/BcatSaveData.
|-
| 0x25
| 0x1
| Unknown. 0 for SystemSaveData/SaveData.
|-
| 0x26
| 0x1A
| Not initialized for SystemSaveData/SaveData.
|}
 
Total size is 0x40-bytes.
 
= DeviceSaveData =
This is accessed using the same commands for SaveData with the same input u8, the only difference compared to SaveData is the [[#SaveDataAttribute]].
 
= BcatSaveData =
This is accessed using the same commands for SaveData with the same input u8. The [[#SaveDataAttribute]] is the same as DeviceSaveData (besides the SaveDataType), except that the [[NCM_services#ApplicationId|ApplicationId]] field is always set to <input ApplicationId> (unlike DeviceSaveData where it's optional). See above regarding [[#SaveDataCreationInfo]].
 
The 0x10-byte struct passed to [[#CreateSaveDataFileSystem]] has the first 0x5-bytes set to all-zero.
 
MountSystemBcatSaveData uses [[#OpenSaveDataFileSystemBySystemSaveDataId]] with [[#SaveDataSpaceId]] System. The [[#SaveDataAttribute]] is all-zero, except for the SaveDataType, and SystemSaveDataId is set to the input param.
 
= SaveDataInfo =
This is "nn::fs::SaveDataInfo".
 
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0
| 0x8
| SaveDataId
|-
| 0x8
| 0x1
| [[#SaveDataSpaceId]]
|-
| 0x9
| 0x1
| [[#SaveDataType]]
|-
| 0xA
| 0x6
| Padding?
|-
| 0x10
| 0x10
| UserId
|-
| 0x20
| 0x8
| SystemSaveDataId (0 for regular SaveData)
|-
| 0x28
| 0x8
| [[NCM_services#ApplicationId|ApplicationId]] (for regular SaveData)
|-
| 0x30
| 0x8
| Raw saveimage size
|-
| 0x38
| 0x2
| SaveDataIndex
|-
| 0x3A
| 0x1
| [[#SaveDataRank]]
|-
| 0x3B
| 0x25
| Unknown. Usually zeros?
|}
 
This is a 0x60-byte struct.
 
= SaveDataFileSystemExtraData =
This is a 0x200-byte struct. Appears to match [[Savegames#Extra_data]].
 
= InitialDataVersion2 =
This is a 0x8210-byte struct used by [[#ISaveDataTransferManagerWithDivision]].
 
= FsAccessControlRestrictionMode =
This is "nn::fs::FsAccessControlRestrictionMode".
 
{| class="wikitable" border="1"
|-
! Value || Name
|-
|-
| 0x20
| 0 ||  
| 0x8
| SystemSaveDataId (0 for regular SaveData)
|-
| 0x28
| 0x8
| [[NCM_services#ApplicationId|ApplicationId]] (for regular SaveData)
|-
| 0x30
| 0x8
| Raw saveimage size
|-
| 0x38
| 0x2
| SaveDataIndex
|-
| 0x3A
| 0x1
| [[#SaveDataRank]]
|-
| 0x3B
| 0x25
| Unknown. Usually zeros?
|}
|}
This is a 0x60-byte struct.
= SaveDataFileSystemExtraData =
This is a 0x200-byte struct. Appears to match [[Savegames#Extra_data]].
= InitialDataVersion2 =
This is a 0x8210-byte struct used by [[#ISaveDataTransferManagerWithDivision]].


[[Category:Services]]
[[Category:Services]]
Retrieved from "https://switchbrew.org/wiki/Filesystem_services"