Difference between revisions of "HID services"
(14 intermediate revisions by 3 users not shown) | |||
Line 13: | Line 13: | ||
|- | |- | ||
| 21 || [[#ActivateMouse]] | | 21 || [[#ActivateMouse]] | ||
+ | |- | ||
+ | | 22 || [19.0.0+] AddMouseWheelDelta | ||
|- | |- | ||
| 26 || [16.0.0+] ActivateDebugMouse | | 26 || [16.0.0+] ActivateDebugMouse | ||
Line 95: | Line 97: | ||
|- | |- | ||
| 91 || [[#ActivateGesture]] | | 91 || [[#ActivateGesture]] | ||
+ | |- | ||
+ | | 92 || [18.0.0+] SetGestureOutputRanges | ||
|- | |- | ||
| 100 || [[#SetSupportedNpadStyleSet]] | | 100 || [[#SetSupportedNpadStyleSet]] | ||
Line 173: | Line 177: | ||
|- | |- | ||
| 212 || [11.0.0+] [[#SendVibrationValueInBool]] | | 212 || [11.0.0+] [[#SendVibrationValueInBool]] | ||
+ | |- | ||
+ | | 213 || [17.0.0+] SendVibrationValueInMode | ||
+ | |- | ||
+ | | 214 || [17.0.0+] SendVibrationValuesInMode | ||
|- | |- | ||
| 300 || [3.0.0+] [[#ActivateConsoleSixAxisSensor]] | | 300 || [3.0.0+] [[#ActivateConsoleSixAxisSensor]] | ||
Line 195: | Line 203: | ||
|- | |- | ||
| 310 || [6.0.0+] [[#ResetSevenSixAxisSensorTimestamp]] | | 310 || [6.0.0+] [[#ResetSevenSixAxisSensorTimestamp]] | ||
+ | |- | ||
+ | | 311 || [17.0.0+] ForceActivateConsoleSixAxisSensor | ||
+ | |- | ||
+ | | 312 || [17.0.0+] ForceDeactivateConsoleSixAxisSensor | ||
|- | |- | ||
| 400 || [3.0.0+] [[#IsUsbFullKeyControllerEnabled]] | | 400 || [3.0.0+] [[#IsUsbFullKeyControllerEnabled]] | ||
Line 281: | Line 293: | ||
|- | |- | ||
| 1003 || [9.0.0+] [[#IsFirmwareUpdateNeededForNotification]] | | 1003 || [9.0.0+] [[#IsFirmwareUpdateNeededForNotification]] | ||
+ | |- | ||
+ | | 1004 || [17.0.0+] SetTouchScreenResolution | ||
|- | |- | ||
| 2000 || [10.0.0+] [[#ActivateDigitizer]] | | 2000 || [10.0.0+] [[#ActivateDigitizer]] | ||
Line 533: | Line 547: | ||
* 0x2: [6.0.0+] | * 0x2: [6.0.0+] | ||
* 0x3: [8.0.0+] | * 0x3: [8.0.0+] | ||
+ | * 0x5: [18.0.0+] | ||
== SetNpadJoyHoldType == | == SetNpadJoyHoldType == | ||
Line 1,025: | Line 1,040: | ||
|- | |- | ||
| 17 || [13.0.0+] IsTouchScreenManaged | | 17 || [13.0.0+] IsTouchScreenManaged | ||
+ | |- | ||
+ | | 18 || [18.0.0+] SetTouchScreenAutoPilotStateWithAruid | ||
|- | |- | ||
| 20 || [[#DeactivateMouse]] | | 20 || [[#DeactivateMouse]] | ||
Line 1,135: | Line 1,152: | ||
|- | |- | ||
| 211 || [6.0.0+] StartFirmwareUpdateIndividual | | 211 || [6.0.0+] StartFirmwareUpdateIndividual | ||
+ | |- | ||
+ | | 212 || [19.0.0+] GetDetailFirmwareVersion | ||
|- | |- | ||
| 215 || [6.0.0+] SetUsbFirmwareForceUpdateEnabled | | 215 || [6.0.0+] SetUsbFirmwareForceUpdateEnabled | ||
|- | |- | ||
| 216 || [6.0.0+] SetAllKuinaDevicesToFirmwareUpdateMode | | 216 || [6.0.0+] SetAllKuinaDevicesToFirmwareUpdateMode | ||
+ | |- | ||
+ | | 217 || [17.0.0+] StartFirmwareUpdateFromImageSet | ||
|- | |- | ||
| 221 || [3.0.0+] [[#UpdateControllerColor]] | | 221 || [3.0.0+] [[#UpdateControllerColor]] | ||
Line 1,201: | Line 1,222: | ||
|- | |- | ||
| 251 || [12.0.0+] GetAnalogStickModuleParam | | 251 || [12.0.0+] GetAnalogStickModuleParam | ||
+ | |- | ||
+ | | 253 || [19.0.0+] ClearStorageForShipment | ||
|- | |- | ||
| 301 || [5.0.0-8.1.0] [[#GetAbstractedPadHandles]] | | 301 || [5.0.0-8.1.0] [[#GetAbstractedPadHandles]] | ||
Line 1,233: | Line 1,256: | ||
|- | |- | ||
| 350 || [5.0.0+] [[#AddRegisteredDevice]] | | 350 || [5.0.0+] [[#AddRegisteredDevice]] | ||
+ | |- | ||
+ | | 351 || [17.0.0-18.1.0] GetRegisteredDevicesCountDebug | ||
+ | |- | ||
+ | | 352 || [17.0.0-18.1.0] DeleteRegisteredDevicesDebug | ||
|- | |- | ||
| 400 || [6.0.0+] DisableExternalMcuOnNxDevice | | 400 || [6.0.0+] DisableExternalMcuOnNxDevice | ||
Line 1,255: | Line 1,282: | ||
|- | |- | ||
| 600 || [10.0.0+] ConvertPadState | | 600 || [10.0.0+] ConvertPadState | ||
+ | |- | ||
+ | | 601 || [18.0.0+] [[#IsButtonConfigSupported]] | ||
+ | |- | ||
+ | | 602 || [18.0.0+] [[#IsButtonConfigEmbeddedSupported]] | ||
+ | |- | ||
+ | | 603 || [18.0.0+] [[#DeleteButtonConfig]] | ||
+ | |- | ||
+ | | 604 || [18.0.0+] [[#DeleteButtonConfigEmbedded]] | ||
+ | |- | ||
+ | | 605 || [18.0.0+] [[#SetButtonConfigEnabled]] | ||
+ | |- | ||
+ | | 606 || [18.0.0+] [[#SetButtonConfigEmbeddedEnabled]] | ||
+ | |- | ||
+ | | 607 || [18.0.0+] [[#IsButtonConfigEnabled]] | ||
+ | |- | ||
+ | | 608 || [18.0.0+] [[#IsButtonConfigEmbeddedEnabled]] | ||
+ | |- | ||
+ | | 609 || [18.0.0+] [[#SetButtonConfigEmbedded]] | ||
+ | |- | ||
+ | | 610 || [18.0.0+] [[#SetButtonConfigFull]] | ||
+ | |- | ||
+ | | 611 || [18.0.0+] [[#SetButtonConfigLeft]] | ||
+ | |- | ||
+ | | 612 || [18.0.0+] [[#SetButtonConfigRight]] | ||
+ | |- | ||
+ | | 613 || [18.0.0+] [[#GetButtonConfigEmbedded]] | ||
+ | |- | ||
+ | | 614 || [18.0.0+] [[#GetButtonConfigFull]] | ||
+ | |- | ||
+ | | 615 || [18.0.0+] [[#GetButtonConfigLeft]] | ||
+ | |- | ||
+ | | 616 || [18.0.0+] [[#GetButtonConfigRight]] | ||
|- | |- | ||
| 650 || [12.0.0+] AddButtonPlayData | | 650 || [12.0.0+] AddButtonPlayData | ||
Line 1,360: | Line 1,419: | ||
[9.0.0+] Now takes a total of 8-bytes of input, returns a total of 0x18-bytes of output. | [9.0.0+] Now takes a total of 8-bytes of input, returns a total of 0x18-bytes of output. | ||
+ | |||
+ | [18.0.0+] Now takes a total of 8-bytes of input, returns a total of 0x20-bytes of output. | ||
== GetSixAxisSensorDriverStates == | == GetSixAxisSensorDriverStates == | ||
Line 1,522: | Line 1,583: | ||
| 213 || ActivateNfc | | 213 || ActivateNfc | ||
|- | |- | ||
− | | 214 || [4.0.0 | + | | 214 || [4.0.0-18.1.0] GetXcdHandleForNpadWithNfc |
|- | |- | ||
| 215 || [4.0.0+] IsNfcActivated | | 215 || [4.0.0+] IsNfcActivated | ||
+ | |- | ||
+ | | 216 || [19.0.0+] GetAbstractedPadIdForNpadWithNfc | ||
+ | |- | ||
+ | | 217 || [19.0.0+] [[#SetNfcEvent]] | ||
+ | |- | ||
+ | | 218 || [19.0.0+] [[#GetNfcInfo]] | ||
+ | |- | ||
+ | | 219 || [19.0.0+] StartNfcDiscovery | ||
+ | |- | ||
+ | | 220 || [19.0.0+] StopNfcDiscovery | ||
+ | |- | ||
+ | | 221 || [19.0.0+] StartNtagRead | ||
+ | |- | ||
+ | | 222 || [19.0.0+] StartNtagWrite | ||
+ | |- | ||
+ | | 223 || [19.0.0+] SendNfcRawData | ||
+ | |- | ||
+ | | 224 || [19.0.0+] RegisterMifareKey | ||
+ | |- | ||
+ | | 225 || [19.0.0+] ClearMifareKey | ||
+ | |- | ||
+ | | 226 || [19.0.0+] StartMifareRead | ||
+ | |- | ||
+ | | 227 || [19.0.0+] StartMifareWrite | ||
|- | |- | ||
| 230 || AcquireIrSensorEventHandle | | 230 || AcquireIrSensorEventHandle | ||
Line 1,533: | Line 1,618: | ||
|- | |- | ||
| 233 || [10.0.0+] GetXcdHandleForNpadWithIrSensor | | 233 || [10.0.0+] GetXcdHandleForNpadWithIrSensor | ||
+ | |- | ||
+ | | 234 || [19.0.0+] GetNpadJoyHoldType | ||
+ | |- | ||
+ | | 241 || [19.0.0+] [[#GetDataFormat]] | ||
+ | |- | ||
+ | | 242 || [19.0.0+] [[#SetDataFormat]] | ||
+ | |- | ||
+ | | 243 || [19.0.0+] [[#GetMcuState]] | ||
+ | |- | ||
+ | | 244 || [19.0.0+] [[#SetMcuState]] | ||
+ | |- | ||
+ | | 245 || [19.0.0+] [[#GetMcuVersionForNfc]] | ||
+ | |- | ||
+ | | 246 || [19.0.0+] [[#CheckNfcDevicePower]] | ||
+ | |- | ||
+ | | 247 || [19.0.0+] [[#SetMcuStateImmediate]] | ||
|- | |- | ||
| 301 || ActivateNpadSystem | | 301 || ActivateNpadSystem | ||
Line 1,589: | Line 1,690: | ||
|- | |- | ||
| 330 || [14.0.0+] CheckAbstractedPadConnection | | 330 || [14.0.0+] CheckAbstractedPadConnection | ||
+ | |- | ||
+ | | 332 || [19.0.0+] ConvertAppletDetailedUiTypeFromPlayReportType | ||
|- | |- | ||
| 500 || SetAppletResourceUserId | | 500 || SetAppletResourceUserId | ||
Line 1,627: | Line 1,730: | ||
|- | |- | ||
| 525 || [11.0.0+] IsJoyConAttachedOnAllRail | | 525 || [11.0.0+] IsJoyConAttachedOnAllRail | ||
+ | |- | ||
+ | | 526 || [19.0.0+] IsInvertedControllerConnectedOnRail | ||
|- | |- | ||
| 540 || AcquirePlayReportControllerUsageUpdateEvent | | 540 || AcquirePlayReportControllerUsageUpdateEvent | ||
Line 1,634: | Line 1,739: | ||
| 542 || AcquirePlayReportRegisteredDeviceUpdateEvent | | 542 || AcquirePlayReportRegisteredDeviceUpdateEvent | ||
|- | |- | ||
− | | 543 || GetRegisteredDevicesOld ([1.0.0-4.1.0] GetRegisteredDevices) | + | | 543 || [5.0.0-18.1.0] GetRegisteredDevicesOld ([1.0.0-4.1.0] GetRegisteredDevices) |
|- | |- | ||
| 544 || [3.0.0+] AcquireConnectionTriggerTimeoutEvent | | 544 || [3.0.0+] AcquireConnectionTriggerTimeoutEvent | ||
Line 1,681: | Line 1,786: | ||
|- | |- | ||
| 812 || [8.0.0+] GetConsoleUniqueSixAxisSensorHandle | | 812 || [8.0.0+] GetConsoleUniqueSixAxisSensorHandle | ||
+ | |- | ||
+ | | 813 || [18.0.0+] GetDeviceType | ||
|- | |- | ||
| 821 || StartAnalogStickManualCalibration | | 821 || StartAnalogStickManualCalibration | ||
Line 1,782: | Line 1,889: | ||
| 1157 || [10.0.0+] [[#CancelConnectionTrigger]] | | 1157 || [10.0.0+] [[#CancelConnectionTrigger]] | ||
|- | |- | ||
− | | 1200 || [10.0.0 | + | | 1200 || [10.0.0-17.0.1] [[#IsButtonConfigSupported]] |
|- | |- | ||
− | | 1201 || [11.0.0 | + | | 1201 || [11.0.0-17.0.1] [[#IsButtonConfigEmbeddedSupported]] ([10.0.0-10.2.0] [[#DeleteButtonConfig]]) |
|- | |- | ||
− | | 1202 || [11.0.0 | + | | 1202 || [11.0.0-17.0.1] [[#DeleteButtonConfig]] ([10.0.0-10.2.0] [[#SetButtonConfigEnabled]]) |
|- | |- | ||
− | | 1203 || [11.0.0 | + | | 1203 || [11.0.0-17.0.1] [[#DeleteButtonConfigEmbedded]] ([10.0.0-10.2.0] [[#IsButtonConfigEnabled]]) |
|- | |- | ||
− | | 1204 || [11.0.0 | + | | 1204 || [11.0.0-17.0.1] [[#SetButtonConfigEnabled]] ([10.0.0-10.2.0] [[#SetButtonConfigEmbedded]]) |
|- | |- | ||
− | | 1205 || [11.0.0 | + | | 1205 || [11.0.0-17.0.1] [[#SetButtonConfigEmbeddedEnabled]] ([10.0.0-10.2.0] [[#SetButtonConfigFull]]) |
|- | |- | ||
− | | 1206 || [11.0.0 | + | | 1206 || [11.0.0-17.0.1] [[#IsButtonConfigEnabled]] ([10.0.0-10.2.0] [[#SetButtonConfigLeft]]) |
|- | |- | ||
− | | 1207 || [11.0.0 | + | | 1207 || [11.0.0-17.0.1] [[#IsButtonConfigEmbeddedEnabled]] ([10.0.0-10.2.0] [[#SetButtonConfigRight]]) |
|- | |- | ||
− | | 1208 || [11.0.0 | + | | 1208 || [11.0.0-17.0.1] [[#SetButtonConfigEmbedded]] ([10.0.0-10.2.0] [[#GetButtonConfigEmbedded]]) |
|- | |- | ||
− | | 1209 || [11.0.0 | + | | 1209 || [11.0.0-17.0.1] [[#SetButtonConfigFull]] ([10.0.0-10.2.0] [[#GetButtonConfigFull]]) |
|- | |- | ||
| 1210 || [10.0.0-10.2.0] [[#GetButtonConfigLeft]] | | 1210 || [10.0.0-10.2.0] [[#GetButtonConfigLeft]] | ||
|- | |- | ||
− | | 1211 || [11.0.0 | + | | 1211 || [11.0.0-17.0.1] [[#SetButtonConfigRight]] ([10.0.0-10.2.0] [[#GetButtonConfigRight]]) |
|- | |- | ||
− | | 1212 || [11.0.0 | + | | 1212 || [11.0.0-17.0.1] [[#GetButtonConfigEmbedded]] |
|- | |- | ||
− | | 1213 || [11.0.0 | + | | 1213 || [11.0.0-17.0.1] [[#GetButtonConfigFull]] |
|- | |- | ||
− | | 1214 || [11.0.0 | + | | 1214 || [11.0.0-17.0.1] [[#GetButtonConfigLeft]] |
|- | |- | ||
− | | 1215 || [11.0.0 | + | | 1215 || [11.0.0-17.0.1] [[#GetButtonConfigRight]] |
|- | |- | ||
| 1250 || [10.0.0+] [[#IsCustomButtonConfigSupported]] | | 1250 || [10.0.0+] [[#IsCustomButtonConfigSupported]] | ||
Line 1,898: | Line 2,005: | ||
| 1291 || [11.0.0+] [[#SetButtonConfigStorageRight]] | | 1291 || [11.0.0+] [[#SetButtonConfigStorageRight]] | ||
|- | |- | ||
− | | 12010 || [11.0.0 | + | | 1308 || [18.0.0+] SetButtonConfigVisible |
+ | |- | ||
+ | | 1309 || [18.0.0+] IsButtonConfigVisible | ||
+ | |- | ||
+ | | 1320 || [17.0.0+] WakeTouchScreenUp | ||
+ | |- | ||
+ | | 1321 || [17.0.0+] PutTouchScreenToSleep | ||
+ | |- | ||
+ | | 1420 || [19.0.0+] GetAppletResourceProperty | ||
+ | |- | ||
+ | | 12010 || [11.0.0-17.0.1] [[#SetButtonConfigLeft]] | ||
|} | |} | ||
Line 3,003: | Line 3,120: | ||
= xcd:sys = | = xcd:sys = | ||
This is "nn::xcd::detail::ISystemServer". | This is "nn::xcd::detail::ISystemServer". | ||
+ | |||
+ | This was removed with [19.0.0+]. | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
Line 4,372: | Line 4,491: | ||
|- | |- | ||
| 0x160 | | 0x160 | ||
− | | | + | | 0x60 |
| [[#SixAxisSensorUserCalibrationStateLifo]] | | [[#SixAxisSensorUserCalibrationStateLifo]] | ||
|- | |- | ||
− | | | + | | 0x1C0 |
− | | | + | | 0x20 |
| UniquePadConfigMutex | | UniquePadConfigMutex | ||
|} | |} | ||
Line 4,780: | Line 4,899: | ||
|- | |- | ||
| 0x4208 | | 0x4208 | ||
− | | | + | | 0x20 |
| [1.0.0-8.1.0] Mutex | | [1.0.0-8.1.0] Mutex | ||
|- | |- | ||
Line 7,279: | Line 7,398: | ||
| "FK" || Pro Controller | | "FK" || Pro Controller | ||
|- | |- | ||
− | | "MY" || | + | | "MY" || MiyabiLeft and MiyabiRight |
|- | |- | ||
− | | "LC" || | + | | "LC" || Tarragon and Tarragon2 |
|- | |- | ||
| "HL" || Famicom left controller | | "HL" || Famicom left controller | ||
Line 7,666: | Line 7,785: | ||
= DeviceTypeInternal = | = DeviceTypeInternal = | ||
This is "nn::hid::detail::DeviceTypeInternal". | This is "nn::hid::detail::DeviceTypeInternal". | ||
+ | |||
+ | [9.0.0+] This has been superseded by [[#DeviceType_2|DeviceType]]. | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
Line 7,702: | Line 7,823: | ||
|} | |} | ||
− | + | = DeviceType = | |
+ | This is "nn::hidtypes::DeviceType". | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
! Value | ! Value | ||
− | |||
− | |||
− | |||
! Description | ! Description | ||
|- | |- | ||
− | | 0 || | + | | 0 || Unknown |
|- | |- | ||
− | | 1 || | + | | 1 || [[#JoyConRight|JoyConRight]] |
|- | |- | ||
− | | 2 || | + | | 2 || [[#JoyConLeft|JoyConLeft]] |
|- | |- | ||
− | | 3 || | + | | 3 || [[#SwitchProController|SwitchProController]] |
|- | |- | ||
− | | 4 || | + | | 4 || MiyabiLeft |
|- | |- | ||
− | | 5 || | + | | 5 || MiyabiRight |
|- | |- | ||
− | | 6 || | + | | 6 || [[#Tarragon|Tarragon]] |
|- | |- | ||
− | | 7 || | + | | 7 || [[#LarkH1|LarkH1]] |
|- | |- | ||
− | | 8 || | + | | 8 || [[#LarkH2|LarkH2]] |
|- | |- | ||
− | | 9 || | + | | 9 || [[#LarkNL|LarkNL]] |
|- | |- | ||
− | | 10 || | + | | 10 || [[#LarkNR|LarkNR]] |
|- | |- | ||
− | | 11 || Lucia | | + | | 11 || [[#Lucia|Lucia]] |
|- | |- | ||
− | | 12 || Palma | | + | | 12 || [[#Palma|Palma]] |
|- | |- | ||
− | | 13 || | + | | 13 || [[#GcOnGggg|GcOnGggg]] |
|- | |- | ||
− | | 14 || | + | | 14 || FiftyL |
|- | |- | ||
− | | 15 || | + | | 15 || UsbPad |
|- | |- | ||
− | | 16 || | + | | 16 || WinGenericPad |
|- | |- | ||
− | | 17 || | + | | 17 || Sio |
|- | |- | ||
− | | 18 || | + | | 18 || FiftyR |
|- | |- | ||
− | | 19 || | + | | 19 || DebugSwitchProControllerCompatibleDevice |
|- | |- | ||
− | | 20 || | + | | 20 || DebugJoyConLeftCompatibleDevice |
|- | |- | ||
− | | 21 || | + | | 21 || DebugJoyConRightCompatibleDevice |
|- | |- | ||
− | | [12.0.0+] | + | | 22 || [12.0.0+] [[#Lagon|Lagon]] |
|- | |- | ||
− | | [12.0.0+] | + | | 23 || [12.0.0+] [[#ExternalGrip|ExternalGrip]] |
|- | |- | ||
− | | [13.0.0+] | + | | 24 || [13.0.0+] [[#SwitchProControllerDfu|SwitchProControllerDfu]] |
|- | |- | ||
− | | [13.0.0+] | + | | 25 || [13.0.0+] [[#ExternalGripDfu|ExternalGripDfu]] |
|- | |- | ||
− | | [13.0.0+] | + | | 26 || [13.0.0+] [[#LuciaDfu|LuciaDfu]] |
|- | |- | ||
− | | [13.0.0+] | + | | 27 || [13.0.0+] [[#LagonDfu|LagonDfu]] |
|- | |- | ||
− | | [13.0.0+] | + | | 28 || [13.0.0+] [[#Lager|Lager]] |
|- | |- | ||
− | | [14.0.0+] | + | | 29 || [14.0.0+] [[#LagerDfu|LagerDfu]] |
|- | |- | ||
− | | [14.0.0+] | + | | 30 || [14.0.0+] [[#Tarragon2|Tarragon2]] |
|} | |} | ||
+ | |||
+ | == JoyConRight == | ||
+ | [[Joy-Con|Joy-Con]] right controller. USB PID is 0x2007. | ||
+ | |||
+ | == JoyConLeft == | ||
+ | [[Joy-Con|Joy-Con]] left controller. USB PID is 0x2006. | ||
+ | |||
+ | == SwitchProController == | ||
+ | [[Pro_Controller|Pro Controller]]. USB PID is 0x2009. | ||
+ | |||
+ | == Tarragon == | ||
+ | Licensed Pro Controller. | ||
+ | |||
+ | == LarkH1 == | ||
+ | Famicom left controller. | ||
+ | |||
+ | == LarkH2 == | ||
+ | Famicom right controller (with microphone). | ||
+ | |||
+ | == LarkNL == | ||
+ | NES left controller. | ||
+ | |||
+ | == LarkNR == | ||
+ | NES right controller. | ||
+ | |||
+ | == Lucia == | ||
+ | SNES controller. USB PID is 0x2017. | ||
+ | |||
+ | == Palma == | ||
+ | Poké Ball Plus controller. | ||
+ | |||
+ | == GcOnGggg == | ||
+ | GameCube controller. | ||
+ | |||
+ | == Lagon == | ||
+ | N64 controller. USB PID is 0x2019. | ||
+ | |||
+ | == ExternalGrip == | ||
+ | Joy-Con Charging Grip. USB PID is 0x200E. | ||
+ | |||
+ | == SwitchProControllerDfu == | ||
+ | "Kotetsu" (Pro Controller MCU) in DFU mode. USB PID is 0x200F. | ||
+ | |||
+ | == ExternalGripDfu == | ||
+ | "Kuina" (Joy-Con Charging Grip MCU) in DFU mode. USB PID is 0x2008. | ||
+ | |||
+ | == LuciaDfu == | ||
+ | SNES controller MCU in DFU mode. USB PID is 0x2018. | ||
+ | |||
+ | == LagonDfu == | ||
+ | N64 controller MCU in DFU mode. USB PID is 0x201A. | ||
+ | |||
+ | == Lager == | ||
+ | Sega Genesis controller. USB PID is 0x201E. | ||
+ | |||
+ | == LagerDfu == | ||
+ | Sega Genesis controller MCU in DFU mode. USB PID is 0x201F. | ||
+ | |||
+ | == Tarragon2 == | ||
+ | Licensed Pro Controller. | ||
= VidPidDefinition = | = VidPidDefinition = | ||
Line 7,836: | Line 8,015: | ||
|- | |- | ||
| 0x57E || 0x337 || 0x337 || 13 | | 0x57E || 0x337 || 0x337 || 13 | ||
+ | |- | ||
+ | | 0x57E || 0x300E || 0x300E || [17.0.0+] 18 | ||
+ | |- | ||
+ | | 0x57E || 0x300D || 0x300D || [17.0.0+] 14 | ||
|- | |- | ||
| 0xF0D || 0x92 || 0x92 || 15 | | 0xF0D || 0x92 || 0x92 || 15 | ||
Line 7,878: | Line 8,061: | ||
|- | |- | ||
| 0x8 | | 0x8 | ||
− | | | + | | 0x4 |
| [[#BatteryLevel|BatteryLevel]] | | [[#BatteryLevel|BatteryLevel]] | ||
|} | |} | ||
Line 9,032: | Line 9,215: | ||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | HasLeftJoySixAxisSensor |
|- | |- | ||
| 3 | | 3 | ||
− | | | + | | HasRightJoySixAxisSensor |
|- | |- | ||
| 4 | | 4 | ||
− | | | + | | HasFullKeySixAxisSensor |
|- | |- | ||
| 5 | | 5 | ||
Line 9,062: | Line 9,245: | ||
|- | |- | ||
| 12 | | 12 | ||
− | | | + | | IsPalma |
|- | |- | ||
| 13 | | 13 | ||
Line 9,077: | Line 9,260: | ||
|- | |- | ||
| 17 | | 17 | ||
− | | | + | | HasLeftJoyRightJoyBattery |
|- | |- | ||
| 18 | | 18 | ||
− | | | + | | HasFullKeyBattery |
|- | |- | ||
| 19 | | 19 | ||
− | | | + | | IsDisconnectControllerIfBatteryNone |
|- | |- | ||
| 20 | | 20 | ||
− | | | + | | HasControllerColor |
|- | |- | ||
| 21 | | 21 | ||
− | | | + | | HasGripColor |
|- | |- | ||
| 22 | | 22 | ||
Line 9,110: | Line 9,293: | ||
|- | |- | ||
| 28 | | 28 | ||
− | | | + | | IsButtonConfigEmbeddedSupported |
|- | |- | ||
| 29 | | 29 | ||
− | | | + | | IsButtonConfigFullSupported |
|- | |- | ||
| 30 | | 30 | ||
− | | | + | | IsButtonConfigLeftSupported |
|- | |- | ||
| 31 | | 31 | ||
− | | | + | | IsButtonConfigRightSupported |
|- | |- | ||
| 32 | | 32 | ||
Line 9,131: | Line 9,314: | ||
|- | |- | ||
| 35 | | 35 | ||
− | | | + | | IsNormalizeAnalogStickWithInnerCross |
|} | |} | ||
Latest revision as of 19:58, 8 October 2024
hid
This is "nn::hid::IHidServer".
CreateAppletResource
Takes a PID and an u64 AppletResourceUserId. Returns an #IAppletResource.
ActivateDebugPad
Takes a PID and an AppletResourceUserId, no output.
ActivateTouchScreen
Takes a PID and an AppletResourceUserId, no output.
ActivateMouse
Takes a PID and an AppletResourceUserId, no output.
ActivateKeyboard
Takes a PID and an AppletResourceUserId, no output.
SendKeyboardLockKeyEvent
Takes a PID, an u32 BitFlagSet #KeyboardLockKeyEvent, and an AppletResourceUserId, no output.
This is identical to the hidsys cmd.
AcquireXpadIdEventHandle
Takes an input u64, returns an output handle.
[10.0.0+] Stubbed, just returns 0.
ReleaseXpadIdEventHandle
Takes an input u64, no output.
[10.0.0+] Stubbed, just returns 0.
ActivateXpad
Takes a PID, an u32 "nn::hid::BasicXpadId", an AppletResourceUserId, no output.
[10.0.0+] Stubbed, just returns 0.
GetXpadIds
Takes a type-0xA output buffer containing an array of u32 "nn::hid::BasicXpadId", returns an output s64 total_out (which is exposed by sdknso as a s32).
[10.0.0+] Now returns a hard-coded list of Ids.
ActivateJoyXpad
Takes an input u32 "nn::hid::JoyXpadId", no output.
[10.0.0+] Stubbed, just returns 0.
GetJoyXpadLifoHandle
Takes an input u32 "nn::hid::JoyXpadId", returns an output handle.
[10.0.0+] Stubbed, just returns 0.
GetJoyXpadIds
Takes a type-0xA output buffer containing an array of u32 "nn::hid::BasicXpadId", returns an output s64.
[10.0.0+] Stubbed, just returns 0.
ActivateSixAxisSensor
Takes an input u32 "nn::hid::JoyXpadId", no output.
[10.0.0+] Stubbed, just returns 0.
DeactivateSixAxisSensor
Takes an input u32 "nn::hid::JoyXpadId", no output.
[10.0.0+] Stubbed, just returns 0.
GetSixAxisSensorLifoHandle
Takes an input u32 "nn::hid::JoyXpadId", returns an output handle.
[10.0.0+] Stubbed, just returns 0.
ActivateJoySixAxisSensor
Takes an input u32 "nn::hid::JoyXpadId", no output.
[10.0.0+] Stubbed, just returns 0.
DeactivateJoySixAxisSensor
Takes an input u32 "nn::hid::JoyXpadId", no output.
[10.0.0+] Stubbed, just returns 0.
GetJoySixAxisSensorLifoHandle
Takes an input u32 "nn::hid::JoyXpadId", returns an output handle.
[10.0.0+] Stubbed, just returns 0.
StartSixAxisSensor
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, no output.
StopSixAxisSensor
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, no output.
IsSixAxisSensorFusionEnabled
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns an output bool.
EnableSixAxisSensorFusion
Takes a PID, a bool, a #SixAxisSensorHandle, and an AppletResourceUserId, no output.
SetSixAxisSensorFusionParameters
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, two floats, and an u64 AppletResourceUserId, no output.
Official sw will throw an error before using this cmd, if the first float is outside of the bounds of 0.0f-1.0f.
GetSixAxisSensorFusionParameters
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, returns two output floats.
ResetSixAxisSensorFusionParameters
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, no output.
SetAccelerometerParameters
Takes a PID, a #SixAxisSensorHandle, two floats, and an AppletResourceUserId, no output.
sdknso will throw an error before using this cmd, if either of the floats are less than 0.0f, or when the second float is larger than the first float.
sdknso 10.x removed the nn::hid wrapper for this.
GetAccelerometerParameters
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns two output floats.
sdknso 10.x removed the nn::hid wrapper for this.
ResetAccelerometerParameters
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, no output.
sdknso 10.x removed the nn::hid wrapper for this.
SetAccelerometerPlayMode
Takes a PID, a #SixAxisSensorHandle, an u32 #AccelerometerPlayMode, and an u64 AppletResourceUserId, no output.
sdknso 10.x removed the nn::hid wrapper for this.
GetAccelerometerPlayMode
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns an output u32 #AccelerometerPlayMode.
sdknso 10.x removed the nn::hid wrapper for this.
ResetAccelerometerPlayMode
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, no output.
sdknso 10.x removed the nn::hid wrapper for this.
SetGyroscopeZeroDriftMode
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, an u32 #GyroscopeZeroDriftMode, and an u64 AppletResourceUserId, no output.
GetGyroscopeZeroDriftMode
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, returns an output u32 #GyroscopeZeroDriftMode.
Gets the value written by #SetGyroscopeZeroDriftMode.
ResetGyroscopeZeroDriftMode
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, no output.
Same as #SetGyroscopeZeroDriftMode except the #GyroscopeZeroDriftMode is hard-coded to value 1 (Standard).
IsSixAxisSensorAtRest
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns an output bool.
IsFirmwareUpdateAvailableForSixAxisSensor
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns an output bool.
EnableSixAxisSensorUnalteredPassthrough
Takes a PID, a #SixAxisSensorHandle, a bool, and an AppletResourceUserId, no output.
IsSixAxisSensorUnalteredPassthroughEnabled
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns an output bool.
StoreSixAxisSensorCalibrationParameter
Takes a PID, a #SixAxisSensorHandle, a SixAxisSensorCalibrationParameter, and an AppletResourceUserId, no output.
LoadSixAxisSensorCalibrationParameter
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns a SixAxisSensorCalibrationParameter.
GetSixAxisSensorIcInformation
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, returns a SixAxisSensorIcInformation.
ResetIsSixAxisSensorDeviceNewlyAssigned
Takes a PID, a #SixAxisSensorHandle, and an AppletResourceUserId, no output.
ActivateGesture
Takes a PID-descriptor, a s32, and an u64 AppletResourceUserId, no output.
sdknso passes hard-coded value 1 for the s32.
SetSupportedNpadStyleSet
Takes a PID-descriptor, an u32 #NpadStyleTag, and an u64 AppletResourceUserId, no output.
GetSupportedNpadStyleSet
Takes a PID-descriptor and an u64 AppletResourceUserId, returns an u32 #NpadStyleTag.
SetSupportedNpadIdType
Takes a PID-descriptor, a type-0x9 input buffer, and an AppletResourceUserId. No output.
The input buffer contains an array of #NpadIdType. The total entries in this array must be <=10.
ActivateNpad
Takes a PID-descriptor and an AppletResourceUserId. No output.
On newer sysvers this runs the same code as #ActivateNpadWithRevision, with revision=0.
DeactivateNpad
Takes a PID and an AppletResourceUserId. No output.
This just returns 0.
[10.0.0+] sdknso now uses the hiddbg cmd instead.
AcquireNpadStyleSetUpdateEventHandle
Takes a PID, an input u32, an u64 AppletResourceUserId, and an u64. Returns an output event handle, autoclear for this is user-specified.
The value for the last u64 doesn't seem to matter (?): official sw sets this to the address of the structure used for storing the event which is initialized after using this cmd.
DisconnectNpad
Takes a PID, an u32 #NpadIdType, and an AppletResourceUserId. No output.
GetPlayerLedPattern
Takes an input u32 #NpadIdType, returns an output u64 (which is exposed by sdknso as an u8).
ActivateNpadWithRevision
Takes a PID-descriptor, a s32 revision, and an AppletResourceUserId. No output.
Revisions:
- 0x0: Initial revision, pre-5.0.0.
- 0x1: [5.0.0+]
- 0x2: [6.0.0+]
- 0x3: [8.0.0+]
- 0x5: [18.0.0+]
SetNpadJoyHoldType
Takes a PID-descriptor, an input #NpadJoyHoldType, and an AppletResourceUserId. No output.
GetNpadJoyHoldType
Takes a PID-descriptor and an AppletResourceUserId. Returns an output #NpadJoyHoldType.
sdknso will Abort when the output is not 0-1.
SetNpadJoyAssignmentModeSingleByDefault
Takes a PID-descriptor, an u32 #NpadIdType, and an AppletResourceUserId. No output.
This eventually calls the same func as #SetNpadJoyAssignmentModeSingle, except with #NpadJoyDeviceType=0.
SetNpadJoyAssignmentModeSingle
Takes a PID-descriptor, an u32 #NpadIdType, AppletResourceUserId, and s64 #NpadJoyDeviceType. No output.
This eventually runs the same code as #SetNpadJoyAssignmentModeSingleWithDestination, except the output fields aren't exposed.
SetNpadJoyAssignmentModeDual
Takes a PID-descriptor, an u32 #NpadIdType, and an AppletResourceUserId. No output.
MergeSingleJoyAsDualJoy
Takes a PID-descriptor, two u32 #NpadIdType, and an AppletResourceUserId. No output.
StartLrAssignmentMode
Takes a PID and an AppletResourceUserId, no output.
StopLrAssignmentMode
Takes a PID and an AppletResourceUserId, no output.
SetNpadHandheldActivationMode
Takes a PID, an AppletResourceUserId, a s64 #NpadHandheldActivationMode, no output.
GetNpadHandheldActivationMode
Takes a PID and an u64 AppletResourceUserId. Returns an output s64 #NpadHandheldActivationMode. Official user-processes Abort if the output value is not 0-2.
SwapNpadAssignment
Takes a PID, two u32s #NpadIdType, and an AppletResourceUserId. No output.
IsUnintendedHomeButtonInputProtectionEnabled
Takes a PID, an u32 #NpadIdType, and an AppletResourceUserId. Returns an output bool.
Unused by sdknso, the flag from #NpadSystemProperties is used instead.
EnableUnintendedHomeButtonInputProtection
Takes a PID, a bool, an u32 #NpadIdType, and an AppletResourceUserId. No output.
SetNpadJoyAssignmentModeSingleWithDestination
Takes a PID, an u32, an AppletResourceUserId, and s64 #NpadJoyDeviceType. Returns an output bool and u32 #NpadIdType.
The bool indicates whether the output #NpadIdType is set.
SetNpadAnalogStickUseCenterClamp
Takes a PID, a bool, an AppletResourceUserId, no output.
SetNpadCaptureButtonAssignment
Takes a PID, a #NpadStyleSet, an AppletResourceUserId, a #NpadButtonSet, no output.
Exactly 1 bit must be set in the #NpadStyleSet. Multiple button bits can be set.
This assigns the button(s) which trigger the CaptureButton.
ClearNpadCaptureButtonAssignment
Takes a PID, an AppletResourceUserId, no output.
GetVibrationDeviceInfo
Takes a #VibrationDeviceHandle. Returns an output #VibrationDeviceInfo.
SendVibrationValue
Takes a PID-descriptor, a #VibrationDeviceHandle, a #VibrationValue immediately after that, and an u64 AppletResourceUserId. No output.
GetActualVibrationValue
Takes a PID-descriptor, a #VibrationDeviceHandle, and an u64 AppletResourceUserId. Returns an output #VibrationValue.
CreateActiveVibrationDeviceList
No input. Returns an #IActiveVibrationDeviceList.
PermitVibration
Takes an input u8 bool. No output.
This affects the config displayed by System Settings.
IsVibrationPermitted
No input. Returns an output u8 bool.
SendVibrationValues
Takes an u64 AppletResourceUserId, and two type-0x9 input buffers containing an array of: #VibrationDeviceHandle for first buffer, and #VibrationValue for the second buffer.
Official sw uses the same entry-count for each array.
SendVibrationGcErmCommand
Takes a PID, a #VibrationDeviceHandle, AppletResourceUserId, an u64 #VibrationGcErmCommand, no output.
GetActualVibrationGcErmCommand
Takes a PID, a #VibrationDeviceHandle, AppletResourceUserId, returns an output u64 #VibrationGcErmCommand.
BeginPermitVibrationSession
Takes an input AppletResourceUserId, no output.
Begins a forced-permitted vibration session.
EndPermitVibrationSession
No input/output.
Ends the session started by #BeginPermitVibrationSession.
IsVibrationDeviceMounted
Takes a PID, an #VibrationDeviceHandle, and an u64 AppletResourceUserId, returns an output u8 bool.
SendVibrationValueInBool
Takes a PID, a bool, a #VibrationDeviceHandle, and an AppletResourceUserId, no output.
Stubbed, this just returns 0.
This is currently not exposed by sdknso.
ActivateConsoleSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
As of [10.0.0+] sdknso no longer uses this with SevenSixAxisSensor.
StartConsoleSixAxisSensor
Takes a PID, a #ConsoleSixAxisSensorHandle, and an AppletResourceUserId, no output.
StopConsoleSixAxisSensor
Takes a PID, a #ConsoleSixAxisSensorHandle, and an AppletResourceUserId, no output.
ActivateSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
Unused by official sw, #ActivateConsoleSixAxisSensor is used instead. However, internally ActivateSevenSixAxisSensor is identical to #ActivateConsoleSixAxisSensor. Deactivation is done with hiddbg DeactivateConsoleSixAxisSensor (which is unused by official sw).
StartSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
StopSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
InitializeSevenSixAxisSensor
Takes a PID, an u64 AppletResourceUserId, two u64s for the size of each TransferMemory, and two TransferMemory handles. No output.
The size of the first TransferMemory is 0x1000 with MemoryPermission=read-only, while the second one has size 0x7F000 with MemoryPermission=none. sdknso uses an user-specified buffer for this, with the second tmem immediately following the first one. sdknso later uses data at buf+0 for loading SevenSixAxisSensor state.
The data at tmem+0 has the following structure:
Offset | Size | Description |
---|---|---|
0x0 | 0x10 | Unused by sdknso. |
0x10 | 0x8 | Latest entry. |
0x18 | 0x8 | Total entries. |
0x20 | 0xA50(0x21*0x50) | Array of the below entries. |
Entry:
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Timestamp |
0x8 | 0x10 | Unused by sdknso. |
0x10 | 0x40 | SevenSixAxisSensorState |
SevenSixAxisSensorState:
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | First timestamp. |
0x8 | 0x8 | Second timestamp (in samples). |
0x10 | 0x8 | ? (Increased every sleep cicle) |
0x18 | 0x4 | float AccelerationX |
0x1C | 0x4 | float AccelerationY |
0x20 | 0x4 | float AccelerationZ |
0x24 | 0x4 | float AngularVelocityX |
0x28 | 0x4 | float AngularVelocityY |
0x2C | 0x4 | float AngularVelocityZ |
0x30 | 0x4 | float QuaternionX |
0x34 | 0x4 | float QuaternionY |
0x38 | 0x4 | float QuaternionZ |
0x3C | 0x4 | float QuaternionW |
FinalizeSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
SetSevenSixAxisSensorFusionStrength
Takes a PID, a float, and an u64 AppletResourceUserId, no output.
GetSevenSixAxisSensorFusionStrength
Takes a PID and an u64 AppletResourceUserId, returns an output float.
ResetSevenSixAxisSensorTimestamp
Takes a PID and an u64 AppletResourceUserId, no output.
IsUsbFullKeyControllerEnabled
No input, returns an output bool.
EnableUsbFullKeyController
Takes an input bool, no output.
IsUsbFullKeyControllerConnected
Takes an input u32 #NpadIdType, returns an output bool.
HasBattery
Takes an input u32, returns an output bool.
sdknso exposes this under "nn::hid::system::". [10.0.0+] sdknso now only exposes the hidsys version of this cmd.
HasLeftRightBattery
Takes an input u32, returns two output bools.
sdknso exposes this under "nn::hid::system::". [10.0.0+] sdknso now only exposes the hidsys version of this cmd.
GetNpadInterfaceType
Takes an input u32 #NpadIdType, returns an output u8 #NpadInterfaceType.
The NpadInterfaceType must be 1-4, otherwise this will Abort.
sdknso exposes this under "nn::hid::system::". [10.0.0+] sdknso now only exposes the hidsys version of this cmd.
GetNpadLeftRightInterfaceType
Takes an input u32 #NpadIdType, returns two output u8s #NpadInterfaceType.
sdknso exposes this under "nn::hid::system::". [10.0.0+] sdknso now only exposes the hidsys version of this cmd.
GetNpadOfHighestBatteryLevel
Takes a PID, a type-0x9 input buffer containing an array of u32 #NpadIdType, an u64 AppletResourceUserId, returns an output u32 #NpadIdType.
Handheld is ignored.
GetPalmaConnectionHandle
Takes a PID, an u32 #NpadIdType, an AppletResourceUserId, returns an output #PalmaConnectionHandle.
InitializePalma
Takes an input #PalmaConnectionHandle, no output.
AcquirePalmaOperationCompleteEvent
Takes an input #PalmaConnectionHandle, returns an output Event handle.
sdknso uses an user-specified EventClearMode.
The Event is signaled when data is available with #GetPalmaOperationInfo.
GetPalmaOperationInfo
Takes a #PalmaConnectionHandle, a type-0x6 output buffer, returns an output u64 #PalmaOperationType.
sdknso passes #PalmaOperationInfo+0x8 size 0x140 for the output buffer. [5.1.0+] After using the cmd successfully, #GetPalmaOperationResult is used.
This must be used at some point following using any of the other Palma cmds which trigger an Operation, once the Event is signaled. Up to 4 Operations can be queued at once, the other cmds will throw an error once there's too many operations.
PlayPalmaActivity
Takes an input #PalmaConnectionHandle, an u64 (exposed by sdknso as an u16), no output.
SetPalmaFrModeType
Takes an input #PalmaConnectionHandle, an u64 #PalmaFrModeType, no output.
ReadPalmaStep
Takes an input #PalmaConnectionHandle, no output.
#EnablePalmaStep should be used before this.
EnablePalmaStep
Takes an input bool, a #PalmaConnectionHandle, no output.
ResetPalmaStep
Takes an input #PalmaConnectionHandle, no output.
ReadPalmaApplicationSection
Takes an input #PalmaConnectionHandle, an u64, an u64 size, no output.
sdknso exposes the first u64 as a s32. sdknso will Abort if the input value for the second u64 is >0x100.
WritePalmaApplicationSection
Takes an input #PalmaConnectionHandle, an u64, an u64 size, a type-0x19 input buffer containing a #PalmaApplicationSectionAccessBuffer, no output.
sdknso exposes the first u64 as a s32. Data is copied from the input #PalmaApplicationSectionAccessBuffer with the specified size.
ReadPalmaUniqueCode
Takes an input #PalmaConnectionHandle, no output.
SetPalmaUniqueCodeInvalid
Takes an input #PalmaConnectionHandle, no output.
WritePalmaActivityEntry
Takes an input #PalmaConnectionHandle, an u64, an u64, an u64, an u64, no output.
sdknso exposes the first u64 as an u16, while the rest are exposed as #PalmaActivityEntry.
WritePalmaRgbLedPatternEntry
Takes an input #PalmaConnectionHandle, an u64, a type-0x5 input buffer, no output.
sdknso exposes the u64 as an u16.
WritePalmaWaveEntry
Takes an input #PalmaConnectionHandle, an u64 #PalmaWaveSet, an u64 (exposed by sdknso as an u16), a TransferMemory handle, an u64 tmem_size, an u64 size, no output.
The TransferMemory is created from an user-specified buffer with permissions=R--.
Note that the sysmodule will not properly close the TransferMemory handle if the #PalmaConnectionHandle is invalid.
SetPalmaDataBaseIdentificationVersion
Takes an input s32, a #PalmaConnectionHandle, no output.
GetPalmaDataBaseIdentificationVersion
Takes an input #PalmaConnectionHandle, no output.
SuspendPalmaFeature
Takes an input "nn::util::BitFlagSet<32, #PalmaFeature>", a #PalmaConnectionHandle, no output.
GetPalmaOperationResult
Takes an input #PalmaConnectionHandle, no output.
sdknso only uses this from the wrapper for #GetPalmaOperationInfo.
ReadPalmaPlayLog
Takes an input u16, a #PalmaConnectionHandle, no output.
ResetPalmaPlayLog
Takes an input u16, a #PalmaConnectionHandle, no output.
SetIsPalmaAllConnectable
Takes a PID, a bool, an AppletResourceUserId, no output.
The sysmodule also calls the code which eventually runs from this, from various other funcs internally (bool value varies).
This updates various state. If needed, this uses either StartBleScanForGeneral or StopBleScanForGeneral.
SetIsPalmaPairedConnectable
Takes a PID, a bool, an AppletResourceUserId, no output.
The actual cmd impl ignores the PID/AppletResourceUserId.
This code is also called by another func internally by the sysmodule, where flag = {whether bit6 in a field is set} (presumably #NpadStyleSet). This is eventually called from various funcs, including #SetSupportedNpadStyleSet.
This updates various state. If needed, this uses either StartBleScanForPairedDevice or StopBleScanForPairedDevice.
PairPalma
Takes an input #PalmaConnectionHandle, no output.
This eventually uses BlePairDevice if needed, and updates state.
SetPalmaBoostMode
Takes an input bool, no output.
Stubbed, just returns 0. This was replaced by #EnablePalmaBoostMode.
CancelWritePalmaWaveEntry
Takes an input #PalmaConnectionHandle, no output.
EnablePalmaBoostMode
Takes a PID, a bool, an AppletResourceUserId, no output.
GetPalmaBluetoothAddress
Takes an input #PalmaConnectionHandle, returns an output Address.
SetDisallowedPalmaConnection
Takes a PID, an AppletResourceUserId, a type-0x9 input buffer containing an array of Address, no output.
SetNpadCommunicationMode
Takes a PID, an AppletResourceUserId, a s64 #NpadCommunicationMode, no output.
[2.0.0+] Stubbed, just returns 0.
GetNpadCommunicationMode
No input, returns an output s64 #NpadCommunicationMode.
sdknso uses a switch-statement to determine the value to write to the output #NpadCommunicationMode, with the s64 (written value is the same as the s64). sdknso will Abort if the s64 is not 0-3.
[2.0.0+] Stubbed, just returns hard-coded output mode=3.
SetTouchScreenConfiguration
Takes a PID, a #TouchScreenConfigurationForNx, an AppletResourceUserId, no output.
IsFirmwareUpdateNeededForNotification
Takes a PID, a s32, an AppletResourceUserId, returns an output bool.
sdknso passes hard-coded value 1 for the s32.
ActivateDigitizer
Takes a PID and an AppletResourceUserId, no output.
IAppletResource
This is "nn::hid::IAppletResource".
Cmd | Name |
---|---|
0 | #GetSharedMemoryHandle |
No input. Returns a sharedmem handle.
IActiveVibrationDeviceList
This is "nn::hid::IActiveVibrationDeviceList".
Cmd | Name |
---|---|
0 | #ActivateVibrationDevice |
ActivateVibrationDevice
Takes an input #VibrationDeviceHandle. No output.
hid:dbg
This is "nn::hid::IHidDebugServer".
Cmd | Name |
---|---|
0 | #DeactivateDebugPad |
1 | #SetDebugPadAutoPilotState |
2 | #UnsetDebugPadAutoPilotState |
10 | #DeactivateTouchScreen |
11 | #SetTouchScreenAutoPilotState |
12 | #UnsetTouchScreenAutoPilotState |
13 | [9.0.0+] GetTouchScreenConfiguration |
14 | [11.0.0+] ProcessTouchScreenAutoTune |
15 | [13.0.0+] ForceStopTouchScreenManagement |
16 | [13.0.0+] ForceRestartTouchScreenManagement |
17 | [13.0.0+] IsTouchScreenManaged |
18 | [18.0.0+] SetTouchScreenAutoPilotStateWithAruid |
20 | #DeactivateMouse |
21 | #SetMouseAutoPilotState |
22 | #UnsetMouseAutoPilotState |
25 | [16.0.0+] SetDebugMouseAutoPilotState |
26 | [16.0.0+] UnsetDebugMouseAutoPilotState |
30 | #DeactivateKeyboard |
31 | #SetKeyboardAutoPilotState |
32 | #UnsetKeyboardAutoPilotState |
50 | #DeactivateXpad |
51 | [1.0.0-9.2.0] SetXpadAutoPilotState |
52 | [1.0.0-9.2.0] UnsetXpadAutoPilotState |
53 ([1.0.0-8.1.0] 60) | [1.0.0-9.2.0] #DeactivateJoyXpad |
60 | [9.0.0+] ClearNpadSystemCommonPolicy |
61 | [10.0.0+] DeactivateNpad |
62 | [10.0.0+] ForceDisconnectNpad |
91 | DeactivateGesture |
110 | DeactivateHomeButton |
111 | SetHomeButtonAutoPilotState |
112 | UnsetHomeButtonAutoPilotState |
120 | #DeactivateSleepButton |
121 | #SetSleepButtonAutoPilotState |
122 | #UnsetSleepButtonAutoPilotState |
123 | [1.0.0-9.2.0] DeactivateInputDetector |
130 | DeactivateCaptureButton |
131 | SetCaptureButtonAutoPilotState |
132 | UnsetCaptureButtonAutoPilotState |
133 | [3.0.0+] SetShiftAccelerometerCalibrationValue |
134 | [3.0.0+] GetShiftAccelerometerCalibrationValue |
135 | [3.0.0+] SetShiftGyroscopeCalibrationValue |
136 | [3.0.0+] GetShiftGyroscopeCalibrationValue |
137 | [15.0.0+] SetSixAxisSensorMode |
140 | [3.0.0+] DeactivateConsoleSixAxisSensor |
141 | [5.0.0+] GetConsoleSixAxisSensorSamplingFrequency |
142 | [5.0.0+] DeactivateSevenSixAxisSensor |
143 | [5.0.0+] GetConsoleSixAxisSensorCountStates |
144 | [8.0.0+] GetAccelerometerFsr |
145 | [8.0.0+] SetAccelerometerFsr |
146 | [8.0.0+] GetAccelerometerOdr |
147 | [8.0.0+] SetAccelerometerOdr |
148 | [8.0.0+] GetGyroscopeFsr |
149 | [8.0.0+] SetGyroscopeFsr |
150 | [8.0.0+] GetGyroscopeOdr |
151 | [8.0.0+] SetGyroscopeOdr |
152 | [10.0.0+] GetWhoAmI |
201 | ActivateFirmwareUpdate |
202 | DeactivateFirmwareUpdate |
203 | #StartFirmwareUpdate |
204 | GetFirmwareUpdateStage |
205 | #GetFirmwareVersion |
206 | #GetDestinationFirmwareVersion |
207 | #DiscardFirmwareInfoCacheForRevert |
208 | [3.0.0+] StartFirmwareUpdateForRevert |
209 | [3.0.0+] GetAvailableFirmwareVersionForRevert |
210 | [4.0.0+] IsFirmwareUpdatingDevice |
211 | [6.0.0+] StartFirmwareUpdateIndividual |
212 | [19.0.0+] GetDetailFirmwareVersion |
215 | [6.0.0+] SetUsbFirmwareForceUpdateEnabled |
216 | [6.0.0+] SetAllKuinaDevicesToFirmwareUpdateMode |
217 | [17.0.0+] StartFirmwareUpdateFromImageSet |
221 | [3.0.0+] #UpdateControllerColor |
222 | [4.0.0+] ConnectUsbPadsAsync |
223 | [4.0.0+] DisconnectUsbPadsAsync |
224 | [5.0.0+] #UpdateDesignInfo |
225 | [5.0.0+] #GetUniquePadDriverState |
226 | [5.0.0+] #GetSixAxisSensorDriverStates |
227 | [5.0.0+] GetRxPacketHistory |
228 | [6.0.0+] #AcquireOperationEventHandle |
229 | [6.0.0+] #ReadSerialFlash |
230 | [6.0.0+] #WriteSerialFlash |
231 | [6.0.0+] #GetOperationResult |
232 | [6.0.0+] EnableShipmentMode |
233 | [6.0.0+] ClearPairingInfo |
234 | [6.0.0+] #GetUniquePadDeviceTypeSetInternal |
235 | [7.0.0+] EnableAnalogStickPower |
236 | [9.0.0+] RequestKuinaUartClockCal |
237 | [9.0.0+] GetKuinaUartClockCal |
238 | [9.0.0+] SetKuinaUartClockTrim |
239 | [9.0.0+] KuinaLoopbackTest |
240 | [9.0.0+] RequestBatteryVoltage |
241 | [9.0.0+] GetBatteryVoltage |
242 | [9.0.0+] GetUniquePadPowerInfo |
243 | [9.0.0+] RebootUniquePad |
244 | [9.0.0+] RequestKuinaFirmwareVersion |
245 | [9.0.0+] GetKuinaFirmwareVersion |
246 | [9.0.0+] GetVidPid |
247 | [11.0.0+] GetAnalogStickCalibrationValue |
248 | [11.0.0+] GetUniquePadIdsFull |
249 | [11.0.0+] ConnectUniquePad |
250 | [12.0.0+] IsVirtual |
251 | [12.0.0+] GetAnalogStickModuleParam |
253 | [19.0.0+] ClearStorageForShipment |
301 | [5.0.0-8.1.0] #GetAbstractedPadHandles |
302 | [5.0.0-8.1.0] #GetAbstractedPadState |
303 | [5.0.0-8.1.0] #GetAbstractedPadsState |
321 | [5.0.0-8.1.0] #SetAutoPilotVirtualPadState |
322 | [5.0.0-8.1.0] #UnsetAutoPilotVirtualPadState |
323 | [5.0.0+] #UnsetAllAutoPilotVirtualPadState |
324 | [7.0.0+] #AttachHdlsWorkBuffer |
325 | [7.0.0+] #ReleaseHdlsWorkBuffer |
326 | [7.0.0+] #DumpHdlsNpadAssignmentState |
327 | [7.0.0+] #DumpHdlsStates |
328 | [7.0.0+] #ApplyHdlsNpadAssignmentState |
329 | [7.0.0+] #ApplyHdlsStateList |
330 | [7.0.0+] #AttachHdlsVirtualDevice |
331 | [7.0.0+] #DetachHdlsVirtualDevice |
332 | [7.0.0+] #SetHdlsState |
350 | [5.0.0+] #AddRegisteredDevice |
351 | [17.0.0-18.1.0] GetRegisteredDevicesCountDebug |
352 | [17.0.0-18.1.0] DeleteRegisteredDevicesDebug |
400 | [6.0.0+] DisableExternalMcuOnNxDevice |
401 | [6.0.0+] DisableRailDeviceFiltering |
402 | [10.0.0+] EnableWiredPairing |
403 | [10.0.0+] EnableShipmentModeAutoClear |
404 | [11.0.0+] SetRailEnabled |
500 | [8.0.0+] SetFactoryInt |
501 | [8.0.0+] IsFactoryBootEnabled |
550 | [9.0.0+] SetAnalogStickModelDataTemporarily |
551 | [9.0.0+] GetAnalogStickModelData |
552 | [9.0.0+] ResetAnalogStickModelData |
600 | [10.0.0+] ConvertPadState |
601 | [18.0.0+] #IsButtonConfigSupported |
602 | [18.0.0+] #IsButtonConfigEmbeddedSupported |
603 | [18.0.0+] #DeleteButtonConfig |
604 | [18.0.0+] #DeleteButtonConfigEmbedded |
605 | [18.0.0+] #SetButtonConfigEnabled |
606 | [18.0.0+] #SetButtonConfigEmbeddedEnabled |
607 | [18.0.0+] #IsButtonConfigEnabled |
608 | [18.0.0+] #IsButtonConfigEmbeddedEnabled |
609 | [18.0.0+] #SetButtonConfigEmbedded |
610 | [18.0.0+] #SetButtonConfigFull |
611 | [18.0.0+] #SetButtonConfigLeft |
612 | [18.0.0+] #SetButtonConfigRight |
613 | [18.0.0+] #GetButtonConfigEmbedded |
614 | [18.0.0+] #GetButtonConfigFull |
615 | [18.0.0+] #GetButtonConfigLeft |
616 | [18.0.0+] #GetButtonConfigRight |
650 | [12.0.0+] AddButtonPlayData |
651 | [12.0.0+] StartButtonPlayData |
652 | [12.0.0+] StopButtonPlayData |
2000 | [10.0.0+] DeactivateDigitizer |
2001 | [10.0.0+] SetDigitizerAutoPilotState |
2002 | [10.0.0+] UnsetDigitizerAutoPilotState |
3000 | [16.0.0+] ReloadFirmwareDebugSettings |
DeactivateDebugPad
No input/output.
SetDebugPadAutoPilotState
Takes an input #DebugPadAutoPilotState, no output.
UnsetDebugPadAutoPilotState
No input/output.
DeactivateTouchScreen
No input/output.
SetTouchScreenAutoPilotState
Takes a type-0x5 input buffer containing an array of #TouchState, no output.
The max entries for the array is 16.
UnsetTouchScreenAutoPilotState
No input/output.
DeactivateMouse
No input/output.
SetMouseAutoPilotState
Takes an input #MouseAutoPilotState, no output.
UnsetMouseAutoPilotState
No input/output.
DeactivateKeyboard
No input/output.
SetKeyboardAutoPilotState
Takes an input #KeyboardAutoPilotState, no output.
UnsetKeyboardAutoPilotState
No input/output.
DeactivateXpad
Takes an input "nn::hid::BasicXpadId", no output.
DeactivateNpad
Takes a PID and an AppletResourceUserId, no output.
This just returns 0.
DeactivateSleepButton
No input/output.
SetSleepButtonAutoPilotState
Takes an input #SleepButtonAutoPilotState, no output.
UnsetSleepButtonAutoPilotState
No input/output.
StartFirmwareUpdate
Takes a total of 0x20-bytes of input, 2 handles, and returns an output handle.
[3.0.0+] Now takes a total of 8-bytes of input, and no longer uses any input/output handles.
GetFirmwareVersion
Takes an input #NpadIdType and an input #DeviceType. Returns an output #FirmwareVersion.
GetDestinationFirmwareVersion
Takes an input #NpadIdType and an input #DeviceType. Returns an output #FirmwareVersion.
DiscardFirmwareInfoCacheForRevert
Takes an input #NpadIdType and an input #DeviceType. Returns a total of 5-bytes of output.
[3.0.0+] No input/output.
UpdateControllerColor
Takes two input u32s for the colors, an #UniquePadId, and no output.
A state flag must be clear, otherwise an error is thrown. Afterwards, this flag is set.
Sends the spi-write subcommand to the specified controller, for writing the color data. This writes to offset 0x6050 size 0x6, where the first 3-bytes are from the first u32 and the remaining 3-bytes are from the second u32.
UpdateDesignInfo
Takes 4 input u32s for the colors, an input u8, an input #UniquePadId, and no output.
A state flag must be clear (same as #UpdateControllerColor), otherwise an error is thrown. Afterwards, this flag is set.
Sends the spi-write subcommand to the specified controller, for writing to offset 0x6050 size 0xD. The first 3-bytes from each u32 is used for the spi-write-data, with the u8 being copied immediately afterwards the color data.
GetUniquePadDriverState
Takes a total of 8-bytes of input, returns a total of 0x20-bytes of output.
[9.0.0+] Now takes a total of 8-bytes of input, returns a total of 0x18-bytes of output.
[18.0.0+] Now takes a total of 8-bytes of input, returns a total of 0x20-bytes of output.
GetSixAxisSensorDriverStates
Takes a total of 8-bytes of input and a type-0xA output buffer, returns a total of 8-bytes of output.
[9.0.0+] Now takes a total of 8-bytes of input and a type-0x6 output buffer, returns a total of 8-bytes of output.
AcquireOperationEventHandle
Takes an input #UniquePadId, returns an output Event handle. The EventClearMode used by official sw is user-specified.
This is not used internally by sdk-nso besides exposing it to the user. With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
This must be used before #ReadSerialFlash/#WriteSerialFlash. Afterwards, this Event is used to wait for the async operation started by #ReadSerialFlash/#WriteSerialFlash to finish. After waiting on the Event, #GetOperationResult should be used.
ReadSerialFlash
Takes an input TransferMemory handle, an input u32 offset, an input u64 size, and an #UniquePadId, no output.
Reads from the specified controller's spi-flash. The input size is the original size without page-alignment. The TransferMemory permissions is RW-.
See also #AcquireOperationEventHandle.
With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
WriteSerialFlash
Takes an input TransferMemory handle, an input u32 offset, an input u64 tmem_size, an input u64 size, and an #UniquePadId, no output.
Writes to the specified controller's spi-flash. The TransferMemory permissions is R--.
See also #AcquireOperationEventHandle.
With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
GetOperationResult
Takes an input #UniquePadId, no output.
Get the Result for the Operation and handles cleanup, for the specified controller.
This is not used internally by sdk-nso besides exposing it to the user. With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
GetUniquePadDeviceTypeSetInternal
Takes an input #UniquePadId, returns an #DeviceTypeInternal.
GetAbstractedPadHandles
Takes a type-0xA output buffer containing an array of u64 AbstractedPadHandle and returns an output s32 for total entries.
Returns a handle for each controller detected by the system.
GetAbstractedPadState
Takes an input u64 AbstractedPadHandle, returns an output #AbstractedPadState.
GetAbstractedPadsState
Takes a type-0xA output buffer containing an array of u64 AbstractedPadHandle, a type-0x22 output buffer containing an array of #AbstractedPadState, and returns an output s32 for total entries.
SetAutoPilotVirtualPadState
Takes an input s8 AbstractedVirtualPadId and an input #AbstractedPadState, no output.
UnsetAutoPilotVirtualPadState
Takes an input s8 AbstractedVirtualPadId, no output.
Clears AutoPilot state for the specified pad.
UnsetAllAutoPilotVirtualPadState
No input/output.
Same as #UnsetAutoPilotVirtualPadState except this clears state for every pad.
AttachHdlsWorkBuffer
Takes an input TransferMemory handle and an u64 for the TransferMemory size, no output.
[13.0.0+] Now additionally returns an output #HdlsSessionId.
Official user-processes use TransferMemory size=0x1000 and permissions=RW.
This TransferMemory is used as input/output by the other Hdls commands.
Hdls is for virtual HID controllers.
ReleaseHdlsWorkBuffer
No input/output.
[13.0.0+] Takes an input #HdlsSessionId, no output.
DumpHdlsNpadAssignmentState
No input/output.
[13.0.0+] Takes an input #HdlsSessionId, no output.
After using this cmd, the output #HdlsNpadAssignment is located at tmem+0.
DumpHdlsStates
No input/output.
[13.0.0+] Takes an input #HdlsSessionId, no output.
After using this cmd, the output #HdlsStateList struct is located at tmem+0.
ApplyHdlsNpadAssignmentState
Takes an input u8 bool, no output.
[13.0.0+] Takes an input bool and a #HdlsSessionId, no output.
Prior to using this cmd, the input #HdlsNpadAssignment is written to tmem+0 by the user-process.
ApplyHdlsStateList
No input/output.
[13.0.0+] Takes an input #HdlsSessionId, no output.
Prior to using this cmd, the input #HdlsStateList is written to tmem+0 by the user-process.
The #HdlsState will be applied for each #HdlsHandle. If a #HdlsHandle is not found, code similar to #AttachHdlsVirtualDevice will run with the #HdlsDeviceInfo, then it will continue with applying state with the new device.
AttachHdlsVirtualDevice
Takes an #HdlsDeviceInfo, returns a #HdlsHandle.
DetachHdlsVirtualDevice
Takes an input #HdlsHandle, no output.
SetHdlsState
Takes an input #HdlsState and an input #HdlsHandle, no output.
[9.0.0+] Input order was swapped: now takes an input #HdlsHandle and a #HdlsState, no output.
AddRegisteredDevice
Takes an input #RegisteredDevice, no output.
[11.0.0+] Takes an input #DebugRegisteredDevice, no output.
hid:sys
This is "nn::hid::IHidSystemServer".
Cmd | Name |
---|---|
31 | SendKeyboardLockKeyEvent |
32 | [15.0.0+] SetSystemKeyboardState |
33 | [15.0.0+] UnsetSystemKeyboardState |
101 | #AcquireHomeButtonEventHandle |
111 | #ActivateHomeButton |
121 | #AcquireSleepButtonEventHandle |
131 | #ActivateSleepButton |
141 | #AcquireCaptureButtonEventHandle |
151 | #ActivateCaptureButton |
161 | [7.0.0+] GetPlatformConfig |
210 | AcquireNfcDeviceUpdateEventHandle |
211 | GetNpadsWithNfc |
212 | AcquireNfcActivateEventHandle |
213 | ActivateNfc |
214 | [4.0.0-18.1.0] GetXcdHandleForNpadWithNfc |
215 | [4.0.0+] IsNfcActivated |
216 | [19.0.0+] GetAbstractedPadIdForNpadWithNfc |
217 | [19.0.0+] #SetNfcEvent |
218 | [19.0.0+] #GetNfcInfo |
219 | [19.0.0+] StartNfcDiscovery |
220 | [19.0.0+] StopNfcDiscovery |
221 | [19.0.0+] StartNtagRead |
222 | [19.0.0+] StartNtagWrite |
223 | [19.0.0+] SendNfcRawData |
224 | [19.0.0+] RegisterMifareKey |
225 | [19.0.0+] ClearMifareKey |
226 | [19.0.0+] StartMifareRead |
227 | [19.0.0+] StartMifareWrite |
230 | AcquireIrSensorEventHandle |
231 | ActivateIrSensor |
232 | [10.0.0+] GetIrSensorState |
233 | [10.0.0+] GetXcdHandleForNpadWithIrSensor |
234 | [19.0.0+] GetNpadJoyHoldType |
241 | [19.0.0+] #GetDataFormat |
242 | [19.0.0+] #SetDataFormat |
243 | [19.0.0+] #GetMcuState |
244 | [19.0.0+] #SetMcuState |
245 | [19.0.0+] #GetMcuVersionForNfc |
246 | [19.0.0+] #CheckNfcDevicePower |
247 | [19.0.0+] #SetMcuStateImmediate |
301 | ActivateNpadSystem |
303 | ApplyNpadSystemCommonPolicy |
304 | EnableAssigningSingleOnSlSrPress |
305 | DisableAssigningSingleOnSlSrPress |
306 | GetLastActiveNpad |
307 | GetNpadSystemExtStyle |
308 | [5.0.0+] ApplyNpadSystemCommonPolicyFull |
309 | [5.0.0+] GetNpadFullKeyGripColor |
310 | [6.0.0+] #GetMaskedSupportedNpadStyleSet |
311 | SetNpadPlayerLedBlinkingDevice |
312 | [6.0.0+] SetSupportedNpadStyleSetAll |
313 | [9.0.0+] GetNpadCaptureButtonAssignment |
314 | [9.0.0+] GetAppletFooterUiType |
315 | [9.0.0+] GetAppletDetailedUiType |
316 | [10.0.0+] #GetNpadInterfaceType |
317 | [10.0.0+] #GetNpadLeftRightInterfaceType |
318 | [10.0.0+] #HasBattery |
319 | [10.0.0+] #HasLeftRightBattery |
321 | [3.0.0+] #GetUniquePadsFromNpad |
322 | [10.0.0+] SetNpadSystemExtStateEnabled ([1.0.0-9.2.0] GetIrSensorState) |
323 | [10.0.0+] GetLastActiveUniquePad ([1.0.0-9.2.0] GetXcdHandleForNpadWithIrSensor) |
324 | [10.0.0+] GetUniquePadButtonSet |
325 | [10.0.0+] GetUniquePadColor |
326 | [10.0.0+] GetUniquePadAppletDetailedUiType |
327 | [14.0.0+] GetAbstractedPadIdDataFromNpad |
328 | [14.0.0+] AttachAbstractedPadToNpad |
329 | [14.0.0+] DetachAbstractedPadAll |
330 | [14.0.0+] CheckAbstractedPadConnection |
332 | [19.0.0+] ConvertAppletDetailedUiTypeFromPlayReportType |
500 | SetAppletResourceUserId |
501 | RegisterAppletResourceUserId |
502 | UnregisterAppletResourceUserId |
503 | EnableAppletToGetInput |
504 | SetAruidValidForVibration |
505 | EnableAppletToGetSixAxisSensor |
506 | [14.0.0+] EnableAppletToGetPadInput |
507 | [14.0.0+] EnableAppletToGetTouchScreen |
510 | #SetVibrationMasterVolume |
511 | GetVibrationMasterVolume |
512 | [3.0.0+] BeginPermitVibrationSession |
513 | [3.0.0+] EndPermitVibrationSession |
514 | [12.0.0+] SendVibrationNotificationPattern |
520 | EnableHandheldHids |
521 | DisableHandheldHids |
522 | [9.0.0+] SetJoyConRailEnabled |
523 | [9.0.0+] IsJoyConRailEnabled |
524 | [10.0.0+] IsHandheldHidsEnabled |
525 | [11.0.0+] IsJoyConAttachedOnAllRail |
526 | [19.0.0+] IsInvertedControllerConnectedOnRail |
540 | AcquirePlayReportControllerUsageUpdateEvent |
541 | GetPlayReportControllerUsages |
542 | AcquirePlayReportRegisteredDeviceUpdateEvent |
543 | [5.0.0-18.1.0] GetRegisteredDevicesOld ([1.0.0-4.1.0] GetRegisteredDevices) |
544 | [3.0.0+] AcquireConnectionTriggerTimeoutEvent |
545 | [3.0.0+] SendConnectionTrigger |
546 | [3.0.0+] AcquireDeviceRegisteredEventForControllerSupport |
547 | [3.0.0+] GetAllowedBluetoothLinksCount |
548 | [5.0.0+] GetRegisteredDevices |
549 | [6.0.0+] GetConnectableRegisteredDevices |
700 | ActivateUniquePad |
702 | AcquireUniquePadConnectionEventHandle |
703 | #GetUniquePadIds |
751 | AcquireJoyDetachOnBluetoothOffEventHandle |
800 | ListSixAxisSensorHandles |
801 | IsSixAxisSensorUserCalibrationSupported |
802 | ResetSixAxisSensorCalibrationValues |
803 | StartSixAxisSensorUserCalibration |
804 | CancelSixAxisSensorUserCalibration |
805 | [3.0.0+] GetUniquePadBluetoothAddress |
806 | [3.0.0+] DisconnectUniquePad |
807 | [5.0.0+] #GetUniquePadType |
808 | [5.0.0+] GetUniquePadInterface |
809 | [5.0.0+] #GetUniquePadSerialNumber |
810 | [5.0.0+] GetUniquePadControllerNumber |
811 | [5.0.0+] GetSixAxisSensorUserCalibrationStage |
812 | [8.0.0+] GetConsoleUniqueSixAxisSensorHandle |
813 | [18.0.0+] GetDeviceType |
821 | StartAnalogStickManualCalibration |
822 | RetryCurrentAnalogStickManualCalibrationStage |
823 | CancelAnalogStickManualCalibration |
824 | ResetAnalogStickManualCalibration |
825 | [5.0.0+] GetAnalogStickState |
826 | [5.0.0+] GetAnalogStickManualCalibrationStage |
827 | [5.0.0+] IsAnalogStickButtonPressed |
828 | [5.0.0+] IsAnalogStickInReleasePosition |
829 | [5.0.0+] IsAnalogStickInCircumference |
830 | [7.0.0+] #SetNotificationLedPattern |
831 | [9.0.0+] #SetNotificationLedPatternWithTimeout |
832 | [9.0.0+] #PrepareHidsForNotificationWake |
850 | [3.0.0+] #IsUsbFullKeyControllerEnabled |
851 | [3.0.0+] #EnableUsbFullKeyController |
852 | [3.0.0+] #IsUsbConnected |
870 | [5.1.0+] IsHandheldButtonPressedOnConsoleMode |
900 | [1.0.0-9.2.0] ActivateInputDetector |
901 | [1.0.0-9.2.0] #NotifyInputDetector |
1000 | [3.0.0+] InitializeFirmwareUpdate |
1001 | [3.0.0+] GetFirmwareVersion |
1002 | [3.0.0+] GetAvailableFirmwareVersion |
1003 | [3.0.0+] IsFirmwareUpdateAvailable |
1004 | [3.0.0+] CheckFirmwareUpdateRequired |
1005 | [3.0.0+] StartFirmwareUpdate |
1006 | [3.0.0+] AbortFirmwareUpdate |
1007 | [3.0.0+] GetFirmwareUpdateState |
1008 | [4.0.0+] ActivateAudioControl |
1009 | [4.0.0+] AcquireAudioControlEventHandle |
1010 | [4.0.0+] GetAudioControlStates |
1011 | [4.0.0+] DeactivateAudioControl |
1050 | [5.0.0+] IsSixAxisSensorAccurateUserCalibrationSupported |
1051 | [5.0.0+] StartSixAxisSensorAccurateUserCalibration |
1052 | [5.0.0+] CancelSixAxisSensorAccurateUserCalibration |
1053 | [5.0.0+] GetSixAxisSensorAccurateUserCalibrationState |
1100 | [5.0.0+] #GetHidbusSystemServiceObject |
1120 | [6.0.0+] SetFirmwareHotfixUpdateSkipEnabled |
1130 | [6.0.0-15.0.1] InitializeUsbFirmwareUpdate |
1131 | [6.0.0+] FinalizeUsbFirmwareUpdate |
1132 | [6.0.0+] CheckUsbFirmwareUpdateRequired |
1133 | [6.0.0+] StartUsbFirmwareUpdate |
1134 | [6.0.0+] GetUsbFirmwareUpdateState |
1135 | [15.0.0+] InitializeUsbFirmwareUpdateWithoutMemory |
1150 | [8.0.0+] SetTouchScreenMagnification |
1151 | [9.0.0+] #GetTouchScreenFirmwareVersion |
1152 | [9.0.0+] SetTouchScreenDefaultConfiguration |
1153 | [9.0.0+] GetTouchScreenDefaultConfiguration |
1154 | [9.0.0+] #IsFirmwareAvailableForNotification |
1155 | [9.0.0+] SetForceHandheldStyleVibration |
1156 | [9.0.0+] SendConnectionTriggerWithoutTimeoutEvent |
1157 | [10.0.0+] #CancelConnectionTrigger |
1200 | [10.0.0-17.0.1] #IsButtonConfigSupported |
1201 | [11.0.0-17.0.1] #IsButtonConfigEmbeddedSupported ([10.0.0-10.2.0] #DeleteButtonConfig) |
1202 | [11.0.0-17.0.1] #DeleteButtonConfig ([10.0.0-10.2.0] #SetButtonConfigEnabled) |
1203 | [11.0.0-17.0.1] #DeleteButtonConfigEmbedded ([10.0.0-10.2.0] #IsButtonConfigEnabled) |
1204 | [11.0.0-17.0.1] #SetButtonConfigEnabled ([10.0.0-10.2.0] #SetButtonConfigEmbedded) |
1205 | [11.0.0-17.0.1] #SetButtonConfigEmbeddedEnabled ([10.0.0-10.2.0] #SetButtonConfigFull) |
1206 | [11.0.0-17.0.1] #IsButtonConfigEnabled ([10.0.0-10.2.0] #SetButtonConfigLeft) |
1207 | [11.0.0-17.0.1] #IsButtonConfigEmbeddedEnabled ([10.0.0-10.2.0] #SetButtonConfigRight) |
1208 | [11.0.0-17.0.1] #SetButtonConfigEmbedded ([10.0.0-10.2.0] #GetButtonConfigEmbedded) |
1209 | [11.0.0-17.0.1] #SetButtonConfigFull ([10.0.0-10.2.0] #GetButtonConfigFull) |
1210 | [10.0.0-10.2.0] #GetButtonConfigLeft |
1211 | [11.0.0-17.0.1] #SetButtonConfigRight ([10.0.0-10.2.0] #GetButtonConfigRight) |
1212 | [11.0.0-17.0.1] #GetButtonConfigEmbedded |
1213 | [11.0.0-17.0.1] #GetButtonConfigFull |
1214 | [11.0.0-17.0.1] #GetButtonConfigLeft |
1215 | [11.0.0-17.0.1] #GetButtonConfigRight |
1250 | [10.0.0+] #IsCustomButtonConfigSupported |
1251 | [10.0.0+] #IsDefaultButtonConfigEmbedded |
1252 | [10.0.0+] #IsDefaultButtonConfigFull |
1253 | [10.0.0+] #IsDefaultButtonConfigLeft |
1254 | [10.0.0+] #IsDefaultButtonConfigRight |
1255 | [10.0.0+] #IsButtonConfigStorageEmbeddedEmpty |
1256 | [10.0.0+] #IsButtonConfigStorageFullEmpty |
1257 | [10.0.0+] #IsButtonConfigStorageLeftEmpty |
1258 | [10.0.0+] #IsButtonConfigStorageRightEmpty |
1259 | [11.0.0-12.1.0] #GetButtonConfigStorageEmbeddedDeprecated ([10.0.0-10.2.0] GetButtonConfigStorageEmbedded) |
1260 | [11.0.0-12.1.0] #GetButtonConfigStorageFullDeprecated ([10.0.0-10.2.0] GetButtonConfigStorageFull) |
1261 | [11.0.0-12.1.0] #GetButtonConfigStorageLeftDeprecated ([10.0.0-10.2.0] GetButtonConfigStorageLeft) |
1262 | [11.0.0-12.1.0] #GetButtonConfigStorageRightDeprecated ([10.0.0-10.2.0] GetButtonConfigStorageRight) |
1263 | [11.0.0-12.1.0] #SetButtonConfigStorageEmbeddedDeprecated ([10.0.0-10.2.0] SetButtonConfigStorageEmbedded) |
1264 | [11.0.0-12.1.0] #SetButtonConfigStorageFullDeprecated ([10.0.0-10.2.0] SetButtonConfigStorageFull) |
1265 | [11.0.0-12.1.0] #SetButtonConfigStorageLeftDeprecated ([10.0.0-10.2.0] SetButtonConfigStorageLeft) |
1266 | [11.0.0-12.1.0] #SetButtonConfigStorageRightDeprecated ([10.0.0-10.2.0] SetButtonConfigStorageRight) |
1267 | [10.0.0+] #DeleteButtonConfigStorageEmbedded |
1268 | [10.0.0+] #DeleteButtonConfigStorageFull |
1269 | [10.0.0+] #DeleteButtonConfigStorageLeft |
1270 | [10.0.0+] #DeleteButtonConfigStorageRight |
1271 | [10.0.0+] #IsUsingCustomButtonConfig |
1272 | [10.0.0+] #IsAnyCustomButtonConfigEnabled |
1273 | [10.0.0+] #SetAllCustomButtonConfigEnabled |
1274 | [10.0.0+] #SetDefaultButtonConfig |
1275 | [10.0.0+] #SetAllDefaultButtonConfig |
1276 | [10.0.0+] #SetHidButtonConfigEmbedded |
1277 | [10.0.0+] #SetHidButtonConfigFull |
1278 | [10.0.0+] #SetHidButtonConfigLeft |
1279 | [10.0.0+] #SetHidButtonConfigRight |
1280 | [10.0.0+] #GetHidButtonConfigEmbedded |
1281 | [10.0.0+] #GetHidButtonConfigFull |
1282 | [10.0.0+] #GetHidButtonConfigLeft |
1283 | [10.0.0+] #GetHidButtonConfigRight |
1284 | [11.0.0+] #GetButtonConfigStorageEmbedded |
1285 | [11.0.0+] #GetButtonConfigStorageFull |
1286 | [11.0.0+] #GetButtonConfigStorageLeft |
1287 | [11.0.0+] #GetButtonConfigStorageRight |
1288 | [11.0.0+] #SetButtonConfigStorageEmbedded |
1289 | [11.0.0+] #SetButtonConfigStorageFull |
1290 | [11.0.0+] #SetButtonConfigStorageLeft |
1291 | [11.0.0+] #SetButtonConfigStorageRight |
1308 | [18.0.0+] SetButtonConfigVisible |
1309 | [18.0.0+] IsButtonConfigVisible |
1320 | [17.0.0+] WakeTouchScreenUp |
1321 | [17.0.0+] PutTouchScreenToSleep |
1420 | [19.0.0+] GetAppletResourceProperty |
12010 | [11.0.0-17.0.1] #SetButtonConfigLeft |
SendKeyboardLockKeyEvent
Takes an u32 BitFlagSet #KeyboardLockKeyEvent, no output.
AcquireHomeButtonEventHandle
Takes a PID, an AppletResourceUserId, returns an output Event handle.
The EventClearMode used by sdknso is user-specified. The Event is signaled when #HomeButtonState is updated.
This is used by AM.
ActivateHomeButton
Takes a PID, an AppletResourceUserId, no output.
Activates the HomeButton sharedmem.
AcquireSleepButtonEventHandle
Takes a PID, an AppletResourceUserId, returns an output Event handle.
The EventClearMode used by sdknso is user-specified. The Event is signaled when #SleepButtonState is updated.
This is used by AM.
ActivateSleepButton
Takes a PID, an AppletResourceUserId, no output.
Activates the SleepButton sharedmem.
AcquireCaptureButtonEventHandle
Takes a PID, an AppletResourceUserId, returns an output Event handle.
The EventClearMode used by sdknso is user-specified. The Event is signaled when #CaptureButtonState is updated.
This is used by AM.
ActivateCaptureButton
Takes a PID, an AppletResourceUserId, no output.
Activates the CaptureButton sharedmem.
GetMaskedSupportedNpadStyleSet
Takes an input u64 AppletResourceUserId, returns an output u32 #NpadStyleTag.
Official sw uses the output from GetAppletResourceUserIdOfCallerApplet with this.
GetUniquePadsFromNpad
Takes an input u32 #NpadIdType, a type-0xA output buffer, and returns an output s64 for total output entries (which is copied to a s32 by official sw).
The output buffer contains an array of #UniquePadId.
SetVibrationMasterVolume
Takes an input 32bit float.
GetUniquePadIds
Takes a type-0xA output buffer, and returns an output s64 for total output entries (which is copied to a s32 by official sw).
The output buffer contains an array of #UniquePadId.
GetUniquePadType
Takes an input #UniquePadId and returns an output u64 #UniquePadType.
GetUniquePadSerialNumber
Takes an input #UniquePadId and returns an output #UniquePadSerialNumber.
SetNotificationLedPattern
Takes an input #NotificationLedPattern and an #UniquePadId, no output.
The specified controller must have a HOME button.
This sends subcommand 0x38 to the specified controller, for setting the pattern for the HOME button notification LED. The input structure is converted to the format as follows: ((u8*)cmd_argdata)[pos] = u8_in[pos2] | u8_in[pos3]<<4;
Hence, 4bits from pairs of 2-bytes of the input struct are combined to write to the subcommand. Only the low 4bits of each used byte in the struct is used. This is written to stack initially, then copied to the actual cmd_argdata (the data immediately following the subcommandID byte). There's a total of 0x1D-bytes of cmd_argdata initialized from this.
The layout of cmd_argdata is as follows:
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | ((TimeUnit & 0xF) | ((FrameCount & 0xF) << 4)) |
0x1 | 0x1 | ((CycleCount & 0xF) | ((InitialBrightness & 0xF) << 4)) |
0x2 | 0x1 | ((Frame2Brightness & 0xF) | ((Frame1Brightness & 0xF) << 4)) |
0x3 | 0x1 | ((Frame1TimeToHold & 0xF) | ((Frame1TimeTowards & 0xF) << 4)) |
0x4 | 0x1 | ((Frame2TimeToHold & 0xF) | ((Frame2TimeTowards & 0xF) << 4)) |
0x5 | 0x1 | ((Frame4Brightness & 0xF) | ((Frame3Brightness & 0xF) << 4)) |
0x6 | 0x1 | ((Frame3TimeToHold & 0xF) | ((Frame3TimeTowards & 0xF) << 4)) |
0x7 | 0x1 | ((Frame4TimeToHold & 0xF) | ((Frame4TimeTowards & 0xF) << 4)) |
0x8 | 0x1 | ((Frame6Brightness & 0xF) | ((Frame5Brightness & 0xF) << 4)) |
0x9 | 0x1 | ((Frame5TimeToHold & 0xF) | ((Frame5TimeTowards & 0xF) << 4)) |
0xA | 0x1 | ((Frame6TimeToHold & 0xF) | ((Frame6TimeTowards & 0xF) << 4)) |
0xB | 0x1 | ((Frame8Brightness & 0xF) | ((Frame7Brightness & 0xF) << 4)) |
0xC | 0x1 | ((Frame7TimeToHold & 0xF) | ((Frame7TimeTowards & 0xF) << 4)) |
0xD | 0x1 | ((Frame8TimeToHold & 0xF) | ((Frame8TimeTowards & 0xF) << 4)) |
0xE | 0x1 | ((Frame10Brightness & 0xF) | ((Frame9Brightness & 0xF) << 4)) |
0xF | 0x1 | ((Frame9TimeToHold & 0xF) | ((Frame9TimeTowards & 0xF) << 4)) |
0x10 | 0x1 | ((Frame10TimeToHold & 0xF) | ((Frame10TimeTowards & 0xF) << 4)) |
0x11 | 0x1 | ((Frame12Brightness & 0xF) | ((Frame11Brightness & 0xF) << 4)) |
0x12 | 0x1 | ((Frame11TimeToHold & 0xF) | ((Frame11TimeTowards & 0xF) << 4)) |
0x13 | 0x1 | ((Frame12TimeToHold & 0xF) | ((Frame12TimeTowards & 0xF) << 4)) |
0x14 | 0x1 | ((Frame14Brightness & 0xF) | ((Frame13Brightness & 0xF) << 4)) |
0x15 | 0x1 | ((Frame13TimeToHold & 0xF) | ((Frame13TimeTowards & 0xF) << 4)) |
0x16 | 0x1 | ((Frame14TimeToHold & 0xF) | ((Frame14TimeTowards & 0xF) << 4)) |
0x17 | 0x1 | ((Reserved & 0xF) | ((Frame15Brightness & 0xF) << 4)) |
0x18 | 0x1 | ((Frame15TimeToHold & 0xF) | ((Frame15TimeTowards & 0xF) << 4)) |
0x19 | 0x1 | ((Reserved & 0xF) | ((Reserved & 0xF) << 4)) |
0x1A | 0x1 | ((TimeTowardsFinalBrightness & 0xF) | ((FinalBrightness & 0xF) << 4)) |
0x1B | 0x1 | (Timeout & 0xFF) |
0x1C | 0x1 | ((Timeout >> 8) & 0xFF) |
[9.0.0+] This runs code similar to #SetNotificationLedPatternWithTimeout, except it passes the following param values to an internal func: flag=1 and TimeSpan=0 (with #SetNotificationLedPatternWithTimeout these are flag=0 and TimeSpan={input value}).
SetNotificationLedPatternWithTimeout
Takes an input #NotificationLedPattern, an #UniquePadId, and an s64 TimeSpan, no output.
PrepareHidsForNotificationWake
Takes a type-0x9 input buffer containing an array of #UniquePadId, no output.
IsUsbConnected
Tales an input #UniquePadId, returns an output bool.
NotifyInputDetector
Takes an input u32 bitmask InputSourceId, no output.
This is the only hid:sys command used by USB-sysmodule (with value 0x40).
GetHidbusSystemServiceObject
No input, returns an #IHidbusSystemServer.
GetTouchScreenFirmwareVersion
No input. Returns a #FirmwareVersion.
This requests the current firmware version from the touch screen IC.
It first ensures the touch screen IC's chip id is one of the following:
0x7036 - Ftm4cd60d (STMicroelectronics FingerTipS FT9CJ/FT9CF) 0x4036 - Fst2ba61ya1
Then constructs the final firmware version as follows:
uint32_t FtsVersion = GetFtsReleasedVer(); // Matches the xxxx value found in the FTS_xxxx.fts256 and FTS_xxxx.ftb firmware files. uint8_t FtsVersionByte0 = (FtsVersion & 0xFF); uint8_t FtsVersionByte1 = (FtsVersion & 0xFF00); uint8_t FtsVersionByte2 = (FtsVersion & 0xFF0000); uint8_t FtsVersionByte3 = (FtsVersion & 0xFF000000); uint8_t FirmwareVersionByte0 = FtsVersionByte3; uint8_t FirmwareVersionByte1 = FtsVersionByte2; uint8_t FirmwareVersionByte2 = FtsVersionByte1; uint8_t FirmwareVersionByte3 = FtsVersionByte0; if (FtsVersionByte3 <= 0x31) { FirmwareVersionByte3 = 0; FirmwareVersionByte1 = 0; FirmwareVersionByte0 = 0x31; if (FtsVersionByte2 == 0x5) { FirmwareVersionByte2 = 2; } else if (FtsVersionByte2 == 0x12) { FirmwareVersionByte2 = 0; } else if (FtsVersionByte2 == 0x1A) { FirmwareVersionByte2 = 1; } else { // Throw error. } } uint8_t FirmwareVersion[0x10] = {0}; *(uint32_t *)FirmwareVersion = (FirmwareVersionByte3 << 24) | (FirmwareVersionByte2 << 16) | (FirmwareVersionByte1 << 8) | FirmwareVersionByte0; *((uint32_t *)FirmwareVersion + 1) = 0x5354; // "TS" return FirmwareVersion;
IsFirmwareAvailableForNotification
Takes a PID, a s32, an #UniquePadId, an AppletResourceUserId, returns an output bool.
sdknso uses hard-coded value 1 for the s32.
CancelConnectionTrigger
Takes an input "nn::bluetooth::Address", no output.
IsButtonConfigSupported
Takes an input #UniquePadId, returns an output bool.
[11.0.0+] Takes an input Address, returns an output bool.
IsButtonConfigEmbeddedSupported
No input, returns an output bool.
DeleteButtonConfig
Takes an input #UniquePadId, no output.
[11.0.0+] Takes an input Address, no output.
DeleteButtonConfigEmbedded
No input/output.
SetButtonConfigEnabled
Takes an input bool, an #UniquePadId, no output.
[11.0.0+] Takes an input bool, an Address, no output.
SetButtonConfigEmbeddedEnabled
Takes an input bool, no output.
IsButtonConfigEnabled
Takes an input #UniquePadId, returns an output bool.
[11.0.0+] Takes an input Address, returns an output bool.
IsButtonConfigEmbeddedEnabled
No input, returns an output bool.
SetButtonConfigEmbedded
Takes ([10.0.0-10.2.0] an input #UniquePadId), a type-0x15 input buffer containing a #SystemButtonConfigEmbedded, no output.
SetButtonConfigFull
Takes an input #UniquePadId, a type-0x15 input buffer containing a #SystemButtonConfigFull, no output.
[11.0.0+] Takes an input Address, a type-0x15 input buffer containing a #SystemButtonConfigFull, no output.
SetButtonConfigLeft
Takes an input #UniquePadId, a type-0x15 input buffer containing a #SystemButtonConfigLeft, no output.
[11.0.0+] Takes an input Address, a type-0x15 input buffer containing a #SystemButtonConfigLeft, no output.
SetButtonConfigRight
Takes an input #UniquePadId, a type-0x15 input buffer containing a #SystemButtonConfigRight, no output.
[11.0.0+] Takes an input Address, a type-0x15 input buffer containing a #SystemButtonConfigRight, no output.
GetButtonConfigEmbedded
Takes ([10.0.0-10.2.0] an input #UniquePadId), and a type-0x16 output buffer containing a #SystemButtonConfigEmbedded.
GetButtonConfigFull
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #SystemButtonConfigFull.
[11.0.0+] Takes an input Address, and a type-0x16 output buffer containing a #SystemButtonConfigFull.
GetButtonConfigLeft
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #SystemButtonConfigLeft.
[11.0.0+] Takes an input Address, and a type-0x16 output buffer containing a #SystemButtonConfigLeft.
GetButtonConfigRight
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #SystemButtonConfigRight.
[11.0.0+] Takes an input Address, and a type-0x16 output buffer containing a #SystemButtonConfigRight.
IsCustomButtonConfigSupported
Takes an input #UniquePadId, returns an output bool.
IsDefaultButtonConfigEmbedded
Takes a type-0x15 input buffer containing a #ButtonConfigEmbedded, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsDefaultButtonConfigFull
Takes a type-0x15 input buffer containing a #ButtonConfigFull, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsDefaultButtonConfigLeft
Takes a type-0x15 input buffer containing a #ButtonConfigLeft, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsDefaultButtonConfigRight
Takes a type-0x15 input buffer containing a #ButtonConfigRight, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsButtonConfigStorageEmbeddedEmpty
Takes an input s32 entry-index, returns an output bool.
[10.1.0-10.2.0] This will now Abort if the s32 is negative or >=5. [11.0.0+] This value must now be unsigned <=4, otherwise 0 is returned.
Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. Then the output bool is set to IsFull bit0 == 0. Then 0 is returned.
IsButtonConfigStorageFullEmpty
Takes an input s32 entry-index, returns an output bool.
Same as #IsButtonConfigStorageEmbeddedEmpty except with a different setsys cmd.
IsButtonConfigStorageLeftEmpty
Takes an input s32 entry-index, returns an output bool.
Same as #IsButtonConfigStorageEmbeddedEmpty except with a different setsys cmd.
IsButtonConfigStorageRightEmpty
Takes an input s32 entry-index, returns an output bool.
Same as #IsButtonConfigStorageEmbeddedEmpty except with a different setsys cmd.
GetButtonConfigStorageEmbeddedDeprecated
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigEmbedded.
[10.1.0-10.2.0] This will now Abort if the s32 is negative or >=5.
[11.0.0+] This now calls the same func internally as #GetButtonConfigStorageEmbedded, except the #StorageName isn't exposed.
Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. Then an error is thrown if IsFull bit0 is clear. Then the data at +0x1C8 is converted to #ButtonConfigEmbedded, copied to output, and returns 0.
GetButtonConfigStorageFullDeprecated
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigFull.
Same as #GetButtonConfigStorageEmbeddedDeprecated, except this uses a different setsys cmd, and uses a different conversion func / different output struct.
GetButtonConfigStorageLeftDeprecated
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigLeft.
Same as #GetButtonConfigStorageEmbeddedDeprecated, except this uses a different setsys cmd, and uses a different conversion func / different output struct.
GetButtonConfigStorageRightDeprecated
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigRight.
Same as #GetButtonConfigStorageEmbeddedDeprecated, except this uses a different setsys cmd, and uses a different conversion func / different output struct.
SetButtonConfigStorageEmbeddedDeprecated
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigEmbedded.
[10.1.0-10.2.0] This will now Abort if the s32 is negative or >=5.
[11.0.0+] This now calls the same func internally as #SetButtonConfigStorageEmbedded, except the #StorageName isn't exposed.
If the input config matches the default, this first does:
- Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. When IsFull is set, the config is deleted the same way as #DeleteButtonConfigStorageEmbedded (following the IsFull check).
Afterwards, this uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. The input struct is converted, the output from that is copied to +0x1C8 size 0x3E0, IsFull is set, SetButtonConfigSettingsEmbedded is used with the updated array, and then returns 0.
SetButtonConfigStorageFullDeprecated
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigFull.
Same as #SetButtonConfigStorageEmbeddedDeprecated, except this uses different setsys cmds, and uses a different structs etc.
SetButtonConfigStorageLeftDeprecated
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigLeft.
Same as #SetButtonConfigStorageEmbeddedDeprecated, except this uses different setsys cmds, and uses a different structs etc.
SetButtonConfigStorageRightDeprecated
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigRight.
Same as #SetButtonConfigStorageEmbeddedDeprecated, except this uses different setsys cmds, and uses a different structs etc.
DeleteButtonConfigStorageEmbedded
Takes an input s32 entry-index, no output.
[10.1.0-10.2.0] This will now Abort if the s32 is negative or >=5. [11.0.0+] When the input s32 is larger than unsigned value 4, an error is returned.
Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. Then an error is thrown if IsFull bit0 is clear. Then the data at +0x1C8 size 0x3E0 is cleared, IsFull bit0 is cleared, SetButtonConfigSettingsEmbedded is used with the updated array, and then returns 0.
DeleteButtonConfigStorageFull
Takes an input s32 entry-index, no output.
Same as #DeleteButtonConfigStorageEmbedded except with different setsys cmds.
DeleteButtonConfigStorageLeft
Takes an input s32 entry-index, no output.
Same as #DeleteButtonConfigStorageEmbedded except with different setsys cmds.
DeleteButtonConfigStorageRight
Takes an input s32 entry-index, no output.
Same as #DeleteButtonConfigStorageEmbedded except with different setsys cmds.
IsUsingCustomButtonConfig
Takes an input #UniquePadId, returns an output bool.
IsAnyCustomButtonConfigEnabled
No input, returns an output bool.
SetAllCustomButtonConfigEnabled
Takes an input bool and an AppletResourceUserId, no output.
SetDefaultButtonConfig
Takes an input #UniquePadId, no output.
SetAllDefaultButtonConfig
No input/output.
SetHidButtonConfigEmbedded
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigEmbedded, no output.
SetHidButtonConfigFull
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigFull, no output.
SetHidButtonConfigLeft
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigLeft, no output.
SetHidButtonConfigRight
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigRight, no output.
GetHidButtonConfigEmbedded
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigEmbedded.
GetHidButtonConfigFull
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigFull.
GetHidButtonConfigLeft
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigLeft.
GetHidButtonConfigRight
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigRight.
GetButtonConfigStorageEmbedded
Takes an input s32, a type-0x16 output buffer containing a #ButtonConfigEmbedded, a type-0x1A output buffer containing a #StorageName.
When the input s32 is larger than unsigned value 4, an error is returned.
GetButtonConfigStorageFull
Takes an input s32, a type-0x16 output buffer containing a #ButtonConfigFull, a type-0x1A output buffer containing a #StorageName.
GetButtonConfigStorageLeft
Takes an input s32, a type-0x16 output buffer containing a #ButtonConfigLeft, a type-0x1A output buffer containing a #StorageName.
GetButtonConfigStorageRight
Takes an input s32, a type-0x16 output buffer containing a #ButtonConfigRight, a type-0x1A output buffer containing a #StorageName.
SetButtonConfigStorageEmbedded
Takes an input s32, a type-0x15 input buffer containing a #ButtonConfigEmbedded, a type-0x19 input buffer containing a #StorageName.
When the input s32 is larger than unsigned value 4, this will immediately return (this cmd always returns 0 regardless).
SetButtonConfigStorageFull
Takes an input s32, a type-0x15 input buffer containing a #ButtonConfigFull, a type-0x19 input buffer containing a #StorageName.
SetButtonConfigStorageLeft
Takes an input s32, a type-0x15 input buffer containing a #ButtonConfigLeft, a type-0x19 input buffer containing a #StorageName.
SetButtonConfigStorageRight
Takes an input s32, a type-0x15 input buffer containing a #ButtonConfigRight, a type-0x19 input buffer containing a #StorageName.
IHidbusSystemServer
This is "nn::hidbus::IHidbusSystemServer".
This was added with [5.0.0+].
Cmd | Name |
---|---|
500 | SetAppletResourceUserId |
501 | RegisterAppletResourceUserId |
502 | UnregisterAppletResourceUserId |
hid:tmp
This is "nn::hid::IHidTemporaryServer".
This service was added with [3.0.0+], then removed with [8.0.0+].
Cmd | Name |
---|---|
0 | GetConsoleSixAxisSensorCalibrationValues |
irs
This is "nn::irsensor::IIrSensorServer".
This was added to sdknso with 3.x.
With sdknso versions pre-4.x PointingProcessor used to be DpdProcessor. The packed-config with DpdProcessor (besides RequiredMcuVersion) used to be initialized from user-specified config, now it's hard-coded.
Cmd | Name |
---|---|
302 | #ActivateIrsensor |
303 | #DeactivateIrsensor |
304 | #GetIrsensorSharedMemoryHandle |
305 | #StopImageProcessor |
306 | #RunMomentProcessor |
307 | #RunClusteringProcessor |
308 | #RunImageTransferProcessor |
309 | #GetImageTransferProcessorState |
310 | #RunTeraPluginProcessor |
311 | #GetNpadIrCameraHandle |
312 | #RunPointingProcessor |
313 | #SuspendImageProcessor |
314 | [3.0.0+] #CheckFirmwareVersion |
315 | [4.0.0+] #SetFunctionLevel |
316 | [4.0.0+] #RunImageTransferExProcessor |
317 | [4.0.0+] #RunIrLedProcessor |
318 | [4.0.0+] #StopImageProcessorAsync |
319 | [4.0.0+] #ActivateIrsensorWithFunctionLevel |
ActivateIrsensor
Takes a PID-descriptor and an AppletResourceUserId. No output.
DeactivateIrsensor
Takes a PID-descriptor and an AppletResourceUserId. No output.
Takes a PID-descriptor and an AppletResourceUserId. Returns a SharedMemory handle.
The SharedMemory is "nn::irsensor::detail::StatusManager". It's mapped with permission read-only and size 0x8000.
It's structure is as follows:
Offset | Size | Description |
---|---|---|
0x0 | 0x7FB0 | Array of #DeviceFormat |
0x7FB0 | 0x50 | Array of #AruidFormat |
The array of #DeviceFormat is indexed by PlayerNumber and can hold up to 9 entries. The array of #AruidFormat can only hold up to 5 entries.
DeviceFormat
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #IrCameraStatus |
0x4 | 0x4 | #IrCameraInternalStatus |
0x8 | 0x8 | #IrSensorMode |
0x10 | 0xE20 | #ProcessorStateRingLifo |
ProcessorStateRingLifo
This is "nn::irsensor::detail::RingLifo<X,Y>" where "X" is a specialized processor state (e.g.: "nn::irsensor::MomentProcessorState") and "Y" is the maximum element count (e.g.: 5).
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Start |
0x8 | 0x4 | Count |
0xC | 0x4 | Padding |
0x10 | Variable | ProcessorState |
The maximum element count is 6 for #PointingProcessorMarkerState or 5 for any of the other states.
ProcessorState is specialized depending on the value of #IrSensorMode.
MomentProcessorState
This is "nn::irsensor::MomentProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | AmbientNoiseLevel |
0x14 | 0x4 | Reserved |
0x18 | 0x240 | Array of #MomentStatistic |
The array of #MomentStatistic can hold up to 48 entries. This array can be accessed as [y + x*8] (this is a 6x8 array). region_x = image_x/6, region_y = image_y/8.
MomentStatistic
In sdknso GetMomentProcessorStates, this loops through each MomentProcessorState->MomentStatistic entry: AverageIntensity *= scale;
The scale is calculated with: scale = 76800.0f / (float)(WindowOfInterest.width * WindowOfInterest.height);
Note that 76800 == 320*240
, hence with the default width/height the calculated scale is 1.0f.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | float AverageIntensity |
0x4 | 0x4 | float CentroidX |
0x8 | 0x4 | float CentroidY |
ClusteringProcessorState
This is "nn::irsensor::ClusteringProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x1 | ObjectCount |
0x11 | 0x3 | Reserved |
0x14 | 0x4 | AmbientNoiseLevel |
0x18 | 0x180 | Array of #ClusteringData |
The array of #ClusteringData can hold up to 16 entries.
ClusteringData
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | float AverageIntensity |
0x4 | 0x4 | float CentroidX |
0x8 | 0x4 | float CentroidY |
0xC | 0x4 | PixelCount |
0x10 | 0x2 | BoundX |
0x12 | 0x2 | BoundY |
0x14 | 0x2 | BoundtWidth |
0x16 | 0x2 | BoundHeight |
PointingProcessorMarkerState
This is "nn::irsensor::PointingProcessorMarkerState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x1 | PointingStatus |
0x11 | 0x3 | Reserved |
0x14 | 0x4 | Unknown |
0x18 | 0x4 | float Unknown |
0x1C | 0x4 | float PositionX |
0x20 | 0x4 | float PositionY |
0x24 | 0x4 | float Unknown |
0x28 | 0x2 | WindowOfInterestX |
0x2A | 0x2 | WindowOfInterestY |
0x2C | 0x2 | WindowOfInterestWidth |
0x2E | 0x2 | WindowOfInterestHeight |
0x30 | 0x1 | PointingStatus |
0x31 | 0x3 | Reserved |
0x34 | 0x4 | Unknown |
0x38 | 0x4 | float Unknown |
0x3C | 0x4 | float PositionX |
0x40 | 0x4 | float PositionY |
0x44 | 0x4 | float Unknown |
0x48 | 0x2 | WindowOfInterestX |
0x4A | 0x2 | WindowOfInterestY |
0x4C | 0x2 | WindowOfInterestWidth |
0x4E | 0x2 | WindowOfInterestHeight |
0x50 | 0x1 | PointingStatus |
0x51 | 0x3 | Reserved |
0x54 | 0x4 | Unknown |
0x58 | 0x4 | float Unknown |
0x5C | 0x4 | float PositionX |
0x60 | 0x4 | float PositionY |
0x64 | 0x4 | float Unknown |
0x68 | 0x2 | WindowOfInterestX |
0x6A | 0x2 | WindowOfInterestY |
0x6C | 0x2 | WindowOfInterestWidth |
0x6E | 0x2 | WindowOfInterestHeight |
PointingProcessorState
This is "nn::irsensor::PointingProcessorState".
This is created from #PointingProcessorMarkerState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | PointingStatus |
0x14 | 0x4 | float PositionX |
0x18 | 0x4 | float PositionY |
0x1C | 0x4 | Reserved |
TeraPluginProcessorState
This is "nn::irsensor::TeraPluginProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | AmbientNoiseLevel |
0x14 | 0x12C | PluginData |
AdaptiveClusteringProcessorState
This is "nn::irsensor::AdaptiveClusteringProcessorState".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | AmbientNoiseLevel |
0x14 | 0x4 | AccuracyLevel |
0x18 | 0x1 | ObjectCount |
0x19 | 0x1 | BackgroundIntensity |
0x1A | 0x6 | Reserved |
0x20 | 0x200 | Array of #AdaptiveClusteringData |
The array of #AdaptiveClusteringData can hold up to 16 entries.
AdaptiveClusteringData
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | float CentroidX |
0x4 | 0x4 | float CentroidY |
0x8 | 0x4 | float Area |
0xC | 0x4 | IsIncomplete |
HandAnalysisImageState
This is "nn::irsensor::HandAnalysisImageState".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x960 | Image |
0x96C | 0x4 | Reserved |
HandAnalysisSilhouetteState
This is "nn::irsensor::HandAnalysisSilhouetteState".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x1354 | Unknown |
HandAnalysisSilhouetteStateWithFullFrameShape
This is "nn::irsensor::HandAnalysisSilhouetteStateWithFullFrameShape".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x156C | Unknown |
AruidFormat
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | IrSensorAruid |
0x8 | 0x8 | IrSensorAruidStatus |
StopImageProcessor
Takes a PID-descriptor, an #IrCameraHandle, and an AppletResourceUserId. No output.
RunMomentProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, and a #PackedMomentProcessorConfig. No output.
RunClusteringProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, and a #PackedClusteringProcessorConfig. No output.
RunImageTransferProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, a #PackedImageTransferProcessorConfig, an u64 for the TransferMemory's size, and a TransferMemory handle. No output.
The TransferMemory is created with an user specified buffer and permission none.
GetImageTransferProcessorState
Takes a PID-descriptor, a type-0x6 output buffer, an #IrCameraHandle, and an AppletResourceUserId. Returns an #ImageTransferProcessorState. No output.
RunTeraPluginProcessor
Takes a PID-descriptor, an #IrCameraHandle, a #PackedTeraPluginProcessorConfig (immediately after the previous word), and an AppletResourceUserId. No output.
GetNpadIrCameraHandle
Takes an input #NpadIdType. Returns an output #IrCameraHandle.
RunPointingProcessor
Takes a PID-descriptor, an #IrCameraHandle, a #PackedPointingProcessorConfig (immediately after the previous word), and an AppletResourceUserId. No output.
SuspendImageProcessor
Takes a PID-descriptor, an #IrCameraHandle, and an AppletResourceUserId. No output.
sdknso uses this from the Run*Processor funcs to suspend the current Processor when the current FunctionLevel is >= 0x1, prior to starting another Processor if needed (depending on what Processor was already active via a state field). Hence, this cmd is only used with [4.0.0+].
CheckFirmwareVersion
Takes a PID-descriptor, an #IrCameraHandle, a #PackedMcuVersion, and an AppletResourceUserId. No output.
sdknso didn't actually use this until 4.x (the RequiredMcuVersion was also updated with that version).
SetFunctionLevel
Takes a PID-descriptor, an #IrCameraHandle, a #PackedFunctionLevel, and an AppletResourceUserId. No output.
RunImageTransferExProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, a #PackedImageTransferProcessorExConfig, an u64 for the TransferMemory's size, and a TransferMemory handle. No output.
The TransferMemory is created with an user specified buffer and permission none.
RunIrLedProcessor
Takes a PID-descriptor, an #IrCameraHandle, a #PackedIrLedProcessorConfig (immediately after the previous word), and an AppletResourceUserId. No output.
StopImageProcessorAsync
Takes a PID-descriptor, an #IrCameraHandle, and an AppletResourceUserId. No output.
ActivateIrsensorWithFunctionLevel
Takes a PID-descriptor, an #PackedFunctionLevel, and an AppletResourceUserId. No output.
irs:sys
This is "nn::irsensor::IIrSensorSystemServer".
Cmd | Name |
---|---|
500 | #SetAppletResourceUserId |
501 | #RegisterAppletResourceUserId |
502 | #UnregisterAppletResourceUserId |
503 | #EnableAppletToGetInput |
SetAppletResourceUserId
Takes an AppletResourceUserId. No output.
RegisterAppletResourceUserId
Takes a bool and an AppletResourceUserId. No output.
UnregisterAppletResourceUserId
Takes an AppletResourceUserId. No output.
EnableAppletToGetInput
Takes a bool and an AppletResourceUserId. No output.
ahid:cd
This is "nn::ahid::IServerSession".
Used for USB HID devices.
This service no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | #AcquireDevice |
1 | #ReleaseDevice |
2 | #GetCtrlSession |
3 | #GetReadSession |
4 | [1.0.0-2.3.0] #GetWriteSession |
AcquireDevice
Takes an input s32, no output.
ReleaseDevice
Takes an input s32, no output.
GetCtrlSession
Takes an input u32, returns an #ICtrlSession.
GetReadSession
Takes an input u32, returns an #IReadSession.
GetWriteSession
Takes an input u32, returns an #IWriteSession.
ICtrlSession
This is "nn::ahid::ICtrlSession".
This no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | GetString |
1 | GetCodeBook |
2 | GetReport |
3 | SetReport |
4 | GetIdle |
5 | SetIdle |
6 | GetProtocol |
7 | SetProtocol |
8 | GetDescriptor |
9 | SetDescriptor |
10 | GetStateChangeEvent |
11 | SignalStateChangeEvent |
12 | [3.0.0+] Write |
All of these use USB CtrlXfer, except for GetStateChangeEvent and SignalStateChangeEvent, and GetCodeBook which copies 0x4000-bytes from state to output.
IReadSession
This is "nn::ahid::IReadSession".
This no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | #Read |
Read
Uses PostBufferAsync etc with the INPUT endpoint. The size must be <=0x1000. The actual transfer size is returned in an output u64. The data is copied from the tmpbuf to the output buffer using the actual-transfer-size.
[3.0.0+] Now takes a total of 8-bytes of input.
IWriteSession
This is "nn::ahid::IWriteSession".
This was removed with [3.0.0+].
Cmd | Name |
---|---|
0 | #Write |
Write
This is the inverse of #IReadSession cmd0. Uses the OUTPUT endpoint with an input buffer.
ahid:hdr
This is "nn::ahid::hdr::ISession".
Used internally for USB HID devices.
This service no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | GetDeviceEntries |
1 | GetDeviceList |
2 | GetDeviceParameters |
3 | AttachDevice |
4 | DetachDevice |
5 | [6.0.0+] SetDeviceFilter |
xcd:sys
This is "nn::xcd::detail::ISystemServer".
This was removed with [19.0.0+].
Cmd | Name |
---|---|
0 | #GetDataFormat |
1 | #SetDataFormat |
2 | #GetMcuState |
3 | #SetMcuState |
4 | #GetMcuVersionForNfc |
5 | #CheckNfcDevicePower |
6 | [5.0.0+] #SetMcuStateImmediate |
10 | #SetNfcEvent |
11 | #GetNfcInfo |
12 | StartNfcDiscovery |
13 | StopNfcDiscovery |
14 | StartNtagRead |
15 | StartNtagWrite |
16 | SendNfcRawData |
17 | RegisterMifareKey |
18 | ClearMifareKey |
19 | StartMifareRead |
20 | StartMifareWrite |
101 | GetAwakeTriggerReasonForLeftRail |
102 | GetAwakeTriggerReasonForRightRail |
103 | [10.0.0+] GetAwakeTriggerBatteryLevelTransitionForLeftRail |
104 | [10.0.0+] GetAwakeTriggerBatteryLevelTransitionForRightRail |
[5.0.0+] SetDataFormat, SetMcuState, and ClearMifareKey: now takes a total of 0xC-bytes of input instead of 0x10.
GetDataFormat
Takes an input 8-byte handle, returns an output u8.
SetDataFormat
Takes an input u8 and a 8-byte handle (4-byte alignment), no output.
GetMcuState
Takes an input 8-byte handle, returns an output u8.
SetMcuState
Takes an input u8 and a 8-byte handle (4-byte alignment), no output.
GetMcuVersionForNfc
Takes an input 8-byte handle, returns an output 0x20-byte struct.
CheckNfcDevicePower
Takes an input 8-byte handle, no output.
SetMcuStateImmediate
Takes an input u8 and a 8-byte handle (4-byte alignment), no output.
SetNfcEvent
Takes an input 8-byte handle, returns 2 output Event handles.
GetNfcInfo
Takes an input 8-byte handle and a type-0x1A output buffer.
[6.0.0+]: The buffer type is now 0x32 instead of 0x1A.
This buffer contains a 0x804-byte struct, for the NFC data sent in response to the various other cmds.
hidbus
This is "nn::hidbus::IHidbusServer".
This was added with [5.0.0+].
Official sw opens a temporary service-session for each func using this, with it being closed once done: no global session is kept open.
Cmd | Name |
---|---|
1 | #GetBusHandle |
2 | #IsExternalDeviceConnected |
3 | #Initialize |
4 | #Finalize |
5 | #EnableExternalDevice |
6 | #GetExternalDeviceId |
7 | #SendCommandAsync |
8 | #GetSendCommandAsynceResult |
9 | #SetEventForSendCommandAsycResult |
10 | #GetSharedMemoryHandle |
11 | #EnableJoyPollingReceiveMode |
12 | #DisableJoyPollingReceiveMode |
13 | [5.0.0-6.2.0] GetPollingData |
14 | [6.0.0+] #SetStatusManagerType |
sdknso doesn't use the GetPollingData cmd.
GetBusHandle
Takes an input u32 #NpadIdType, an u64 #BusType and an u64 AppletResourceUserId. Returns an output bool HasHandle and a #BusHandle.
HasHandle indicates whether the #BusHandle is valid.
Official sw will assert when #BusHandle InternalIndex is >=0x11 (>=0x13 with [6.0.0+]). This same check is also done for all funcs using #BusHandle as input.
This cmd will throw an error when #BusType is invalid.
IsExternalDeviceConnected
Takes an input #BusHandle. Returns an output bool IsAttached.
This is not used by sdknso.
Initialize
Takes an input #BusHandle and an u64 AppletResourceUserId. No output.
Prior to using this cmd, sdknso handles sharedmem mapping if not done previously.
Finalize
Takes an input #BusHandle and an u64 AppletResourceUserId. No output.
EnableExternalDevice
Takes an input bool IsEnabled, a #BusHandle, an u64 Version and an u64 AppletResourceUserId. No output.
sdknso passes value 0x38900050018 (0x3A600050018 with 7.x+) for Version.
IsEnabled indicates whether to enable the device (true = enable, false = disable). When false, this will use #DisableJoyPollingReceiveMode if needed.
GetExternalDeviceId
Takes an input #BusHandle. Returns an output u32 DeviceId.
SendCommandAsync
Takes a type-0x21 input buffer and a #BusHandle. No output.
GetSendCommandAsynceResult
Takes a type-0x22 output buffer and a #BusHandle. Returns an output u32 OutSize.
Official sw copies OutSize to an output u64, for the actual output size.
SetEventForSendCommandAsycResult
Takes an input #BusHandle. Returns an output Event handle AttachmentDataReceiveEventHandle with EventClearMode=0.
Official sw with SendAndReceive clears this event (6.x+ sdknso), uses #SendCommandAsync, waits on + clears this event, then uses #GetSendCommandAsynceResult.
No input. Returns an output SharedMemory handle.
The SharedMemory is mapped with size 0x1000 and permissions=R--.
See also #SetStatusManagerType.
This sharedmem is the StatusManager. This sharedmem contains an array of 0x100-byte (0x80-byte with [6.0.0+]) entries, with entry-count {max BusHandles}.
sdknso only uses the first 0x10-bytes of these entries, the rest is the ignored. Entry structure:
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | IsConnected |
0x1 | 0x3 | Reserved |
0x4 | 0x4 | IsConnectedResult |
0x8 | 0x1 | IsEnabled. Bool flag indicating whether a device is enabled. |
0x9 | 0x1 | IsInFocus. Bool flag indicating whether this entry is valid. |
0xA | 0x1 | IsPollingMode. Bool flag indicating whether polling is enabled. |
0xB | 0x1 | Reserved |
0xC | 0x4 | PollingMode |
EnableJoyPollingReceiveMode
Takes a type-0x21 input buffer, a TransferMemory handle, an u32 TransferMemorySize, an u32 #JoyPollingMode and a #BusHandle. No output.
The TransferMemory is created with an user-specified output buffer, with permissions=R--.
The content of the TransferMemory depends of the #JoyPollingMode. This is used by GetJoyPollingReceivedData. Structure of the TransferMemory (DisableSixAxisPollingDataAccessor, EnableSixAxisPollingDataAccessor, JoyButtonOnlyPollingDataAccessor):
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Result. |
0x0 | 0x4 | Padding. |
0x8 | 0x18 | Initialized sysmodule-side, not used by sdknso. |
0x20 | 0x8 | Latest entry. |
0x28 | 0x8 | Total entries. |
The entries specific to the #JoyPollingMode follow, with 0xA entries total. Each entry starts with an u64 timestamp. Structure for each mode, after the timestamp:
DisableSixAxisPollingDataAccessor:
Offset | Size | Description |
---|---|---|
0x0 | 0x26 | Data |
0x26 | 0x1 | Size of data. |
0x27 | 0x1 | Padding |
0x28 | 0x8 | Timestamp |
JoyEnableSixAxisPollingDataAccessor:
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Data |
0x8 | 0x1 | Size of data. |
0x9 | 0x7 | Padding |
0x10 | 0x8 | Timestamp |
JoyButtonOnlyPollingDataAccessor:
Offset | Size | Description |
---|---|---|
0x0 | 0x2C | Data |
0x2C | 0x1 | Size of data. |
0x2D | 0x3 | Padding |
0x30 | 0x8 | Timestamp |
DisableJoyPollingReceiveMode
Takes an input #BusHandle. No output.
SetStatusManagerType
Takes an input u32 #StatusManagerType. No output.
This is used by sdknso immediately after mapping sharedmem (before #Initialize) with hard-coded value 0x2.
This is "nn::hid::detail::SharedMemoryFormat".
The shared memory is a 0x40000 byte read-only segment of memory shared between applications for input. The segment contains structures for most if not all input methods available to applications.
Offset | Size | Description |
---|---|---|
0x0 | 0x400 | DebugPad |
0x400 | 0x3000 | TouchScreen |
0x3400 | 0x400 | Mouse |
0x3800 | 0x400 | Keyboard |
0x3C00 | 0x1000 | Digitizer ([1.0.0-9.2.0] BasicXpad) |
0x4C00 | 0x200 | HomeButton |
0x4E00 | 0x200 | SleepButton |
0x5000 | 0x200 | CaptureButton |
0x5200 | 0x800 | InputDetector |
0x5A00 | 0x4000 | [1.0.0-4.1.0] UniquePad |
0x9A00 | 0x32000 | Npad |
0x3BA00 | 0x800 | Gesture |
0x3C200 | 0x1C | [5.0.0+] ConsoleSixAxisSensor |
0x3DC00 | 0x400 | [16.0.0+] DebugMouse |
This is "nn::hid::detail::DebugPadSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x2C8 | #DebugPadLifo |
DebugPadLifo
This is "nn::hid::detail::DebugPadLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x28 * 17 | Array of #DebugPadStateAtomicStorage |
DebugPadStateAtomicStorage
This is "nn::hid::detail::DebugPadStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x20 | #DebugPadState |
DebugPadState
This is "nn::hid::DebugPadState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | Attributes |
0xC | 0x4 | Buttons |
0x10 | 0x8 | AnalogStickR |
0x18 | 0x8 | AnalogStickL |
This is "nn::hid::detail::TouchScreenSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x2C38 | #TouchScreenLifo |
TouchScreenLifo
This is "nn::hid::detail::TouchScreenLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x298 * 17 | Array of #TouchScreenStateAtomicStorage |
TouchScreenStateAtomicStorage
This is "nn::hid::detail::TouchScreenStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x290 | #TouchScreenState |
TouchScreenState
This is "nn::hid::detail::TouchScreenState" / "nn::hid::TouchScreenState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | s32 Count |
0xC | 0x4 | Reserved |
0x10 | 0x28 * 16 | Touches |
This is "nn::hid::detail::MouseSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x350 | #MouseLifo |
MouseLifo
This is "nn::hid::detail::MouseLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #MouseStateAtomicStorage |
MouseStateAtomicStorage
This is "nn::hid::detail::MouseStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #MouseState |
MouseState
This is "nn::hid::detail::MouseState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | X |
0xC | 0x4 | Y |
0x10 | 0x4 | DeltaX |
0x14 | 0x4 | DeltaY |
0x18 | 0x4 | WheelDeltaX |
0x1C | 0x4 | WheelDeltaY |
0x20 | 0x4 | Buttons |
0x24 | 0x4 | Attributes |
This is "nn::hid::detail::KeyboardSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x3D8 | #KeyboardLifo |
KeyboardLifo
This is "nn::hid::detail::KeyboardLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x38 * 17 | Array of #KeyboardStateAtomicStorage |
KeyboardStateAtomicStorage
This is "nn::hid::detail::KeyboardStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x30 | #KeyboardState |
KeyboardState
This is "nn::hid::detail::KeyboardState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Modifiers |
0x10 | 0x20 | Keys |
This is "nn::hid::detail::BasicXpadSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x400 * 4 | Array of #BasicXpadSharedMemoryEntry |
This is "nn::hid::detail::BasicXpadSharedMemoryEntry".
Offset | Size | Description |
---|---|---|
0x0 | 0x2C8 | #BasicXpadLifo |
BasicXpadLifo
This is "nn::hid::detail::BasicXpadLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x28 * 17 | Array of #BasicXpadStateAtomicStorage |
BasicXpadStateAtomicStorage
This is "nn::hid::detail::BasicXpadStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x20 | #BasicXpadState |
BasicXpadState
This is "nn::hid::detail::BasicXpadState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | Attributes |
0xC | 0x4 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
This is "nn::hid::server::DigitizerSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x680 | #DigitizerLifo |
DigitizerLifo
This is "nn::hid::server::DigitizerLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x60 * 17 | Array of #DigitizerStateAtomicStorage |
DigitizerStateAtomicStorage
This is "nn::hid::server::DigitizerStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x58 | #DigitizerState |
DigitizerState
This is "nn::hid::DigitizerState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | |
0xC | 0x4 | |
0x10 | 0x4 | Attributes |
0x14 | 0x4 | Buttons |
0x18 | 0x4 | |
0x1C | 0x4 | |
0x20 | 0x4 | |
0x24 | 0x4 | |
0x28 | 0x4 | |
0x2C | 0x4 | |
0x30 | 0x4 | |
0x34 | 0x4 | |
0x38 | 0x4 | |
0x3C | 0x4 | |
0x40 | 0x4 | |
0x44 | 0x4 | |
0x48 | 0x4 | |
0x4C | 0x4 | |
0x50 | 0x4 | |
0x54 | 0x4 |
This is "nn::hid::detail::HomeButtonSharedMemoryFormat".
This is used by AM.
Offset | Size | Description |
---|---|---|
0x0 | 0x1B8 | #HomeButtonLifo |
HomeButtonLifo
This is "nn::hid::detail::HomeButtonLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x18 * 17 | Array of #HomeButtonStateAtomicStorage |
HomeButtonStateAtomicStorage
This is "nn::hid::detail::HomeButtonStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x10 | #HomeButtonState |
HomeButtonState
This is "nn::hid::system::HomeButtonState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
This is "nn::hid::detail::SleepButtonSharedMemoryFormat".
This is used by AM.
Offset | Size | Description |
---|---|---|
0x0 | 0x1B8 | #SleepButtonLifo |
SleepButtonLifo
This is "nn::hid::detail::SleepButtonLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x18 * 17 | Array of #SleepButtonStateAtomicStorage |
SleepButtonStateAtomicStorage
This is "nn::hid::detail::SleepButtonStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x10 | #SleepButtonState |
SleepButtonState
This is "nn::hid::system::SleepButtonState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
This is "nn::hid::detail::CaptureButtonSharedMemoryFormat".
This is used by AM.
Offset | Size | Description |
---|---|---|
0x0 | 0x1B8 | #CaptureButtonLifo |
CaptureButtonLifo
This is "nn::hid::detail::CaptureButtonLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x18 * 17 | Array of #CaptureButtonStateAtomicStorage |
CaptureButtonStateAtomicStorage
This is "nn::hid::detail::CaptureButtonStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x10 | #CaptureButtonState |
CaptureButtonState
This is "nn::hid::system::CaptureButtonState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
This is "nn::hid::detail::InputDetectorSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x80 * 16 | Array of #InputDetectorSharedMemoryEntry |
This is "nn::hid::detail::InputDetectorSharedMemoryEntry".
Offset | Size | Description |
---|---|---|
0x0 | 0x50 | #InputDetectorLifo |
InputDetectorLifo
This is "nn::hid::detail::InputDetectorLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x18 * 2 | Array of #InputDetectorStateAtomicStorage |
InputDetectorStateAtomicStorage
This is "nn::hid::detail::InputDetectorStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x10 | #InputDetectorState |
InputDetectorState
This is "nn::hid::detail::InputDetectorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | InputSourceState |
0x8 | 0x8 | SamplingNumber |
This is "nn::hid::detail::UniquePadSharedMemoryFormat".
[5.0.0+] This section has been removed from #SharedMemoryFormat. #UniquePadSharedMemoryFormat is now a specialization of #NpadSharedMemoryFormat.
Offset | Size | Description |
---|---|---|
0x0 | 0x400 * 16 | Array of #UniquePadSharedMemoryEntry |
This is "nn::hid::detail::UniquePadSharedMemoryEntry".
Offset | Size | Description |
---|---|---|
0x0 | 0x1E0 | #UniquePadLifo |
UniquePadLifo
This is "nn::hid::detail::UniquePadLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x80 | #UniquePadConfigLifo |
0x80 | 0x70 * 2 | Array of #AnalogStickCalibrationStateImplLifo |
0x160 | 0x60 | #SixAxisSensorUserCalibrationStateLifo |
0x1C0 | 0x20 | UniquePadConfigMutex |
UniquePadConfigLifo
This is "nn::hid::detail::UniquePadConfigLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 2 | Array of #UniquePadConfigAtomicStorage |
UniquePadConfigAtomicStorage
This is "nn::hid::detail::UniquePadConfigAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #UniquePadConfig |
UniquePadConfig
This is "nn::hid::detail::UniquePadConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Type |
0x4 | 0x4 | Interface |
0x8 | 0x10 | SerialNumber |
0x18 | 0x4 | ControllerNumber |
0x1C | 0x1 | IsActive |
0x1D | 0x3 | Reserved |
0x20 | 0x8 | SamplingNumber |
AnalogStickCalibrationStateImplLifo
This is "nn::hid::detail::AnalogStickCalibrationStateImplLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x28 * 2 | Array of #AnalogStickCalibrationStateImplAtomicStorage |
AnalogStickCalibrationStateImplAtomicStorage
This is "nn::hid::detail::AnalogStickCalibrationStateImplAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x20 | #AnalogStickCalibrationStateImpl |
AnalogStickCalibrationStateImpl
This is "nn::hid::detail::AnalogStickCalibrationStateImpl".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | State |
0x8 | 0x8 | Flags |
0x10 | 0x8 | Stage |
0x18 | 0x8 | SamplingNumber |
SixAxisSensorUserCalibrationStateLifo
This is "nn::hid::detail::SixAxisSensorUserCalibrationStateLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x20 * 2 | Array of #SixAxisSensorUserCalibrationStateAtomicStorage |
SixAxisSensorUserCalibrationStateAtomicStorage
This is "nn::hid::detail::SixAxisSensorUserCalibrationStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x18 | #SixAxisSensorUserCalibrationState |
SixAxisSensorUserCalibrationState
This is "nn::hid::detail::UniquePadConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Flags |
0x4 | 0x4 | Reserved |
0x8 | 0x8 | Stage |
0x10 | 0x8 | SamplingNumber |
This is "nn::hid::detail::NpadSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x5000 * 10 | Array of #NpadSharedMemoryEntry |
Each entry describes an available controller:
Entry | Description |
---|---|
0 to 7 | Players 1 to 8 |
8 | Handheld Mode |
9 | Other |
This is "nn::hid::detail::NpadSharedMemoryEntry".
Offset | Size | Description |
---|---|---|
0x0 | 0x43F8 ([9.0.0-12.1.0] 0x43F0, [1.0.0-8.1.0] 0x4410) | #NpadInternalState |
NpadInternalState
This is "nn::hid::detail::NpadInternalState".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | StyleSet |
0x4 | 0x4 | JoyAssignmentMode |
0x8 | 0xC | FullKeyColor |
0x14 | 0x14 | JoyColor |
0x28 | 0x350 | FullKeyLifo |
0x378 | 0x350 | HandheldLifo |
0x6C8 | 0x350 | JoyDualLifo |
0xA18 | 0x350 | JoyLeftLifo |
0xD68 | 0x350 | JoyRightLifo |
0x10B8 | 0x350 | PalmaLifo ([1.0.0-3.0.2] SystemLifo) |
0x1408 | 0x350 | SystemExtLifo ([4.0.0+] also used for NpadSystem) |
0x1758 | 0x708 | FullKeySixAxisSensorLifo |
0x1E60 | 0x708 | HandheldSixAxisSensorLifo |
0x2568 | 0x708 | JoyDualLeftSixAxisSensorLifo |
0x2C70 | 0x708 | JoyDualRightSixAxisSensorLifo |
0x3378 | 0x708 | JoyLeftSixAxisSensorLifo |
0x3A80 | 0x708 | JoyRightSixAxisSensorLifo |
0x4188 | 0x4 | DeviceType |
0x418C | 0x4 | Reserved |
0x4190 | 0x8 | SystemProperties |
0x4198 | 0x4 | SystemButtonProperties |
0x419C | 0x4 | BatteryLevelJoyDual |
0x41A0 | 0x4 | BatteryLevelJoyLeft |
0x41A4 | 0x4 | BatteryLevelJoyRight |
0x41A8 | 0x60 | [1.0.0-8.1.0] NfcXcdDeviceHandle (replaced by #GetXcdHandleForNpadWithNfc) |
0x41A8 | 0x4 | [9.0.0+] AppletFooterUiAttributes |
0x41AC | 0x1 | [9.0.0+] AppletFooterUiType |
0x41AD | 0x7B | [9.0.0+] Reserved |
0x4208 | 0x20 | [1.0.0-8.1.0] Mutex |
0x4228 ([1.0.0-8.1.0] 0x4248) | 0x1B8 | GcTriggerLifo |
0x43E0 ([1.0.0-8.1.0] 0x4400) | 0x4 | LarkTypeLAndMain |
0x43E4 ([1.0.0-8.1.0] 0x4404) | 0x4 | LarkTypeR |
0x43E8 ([1.0.0-8.1.0] 0x4408) | 0x4 | LuciaType |
0x43EC ([1.0.0-8.1.0] 0x440C) | 0x4 | LagerType |
0x43F0 | 0x1 * 6 | [13.0.0+] Array of #SixAxisSensorProperties |
NpadFullKeyLifo
This is "nn::hid::detail::NpadFullKeyLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadFullKeyStateAtomicStorage |
NpadFullKeyStateAtomicStorage
This is "nn::hid::detail::NpadFullKeyStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadFullKeyState |
NpadFullKeyState
This is "nn::hid::NpadFullKeyState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadHandheldLifo
This is "nn::hid::detail::NpadHandheldLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadHandheldStateAtomicStorage |
NpadHandheldStateAtomicStorage
This is "nn::hid::detail::NpadHandheldStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadHandheldState |
NpadHandheldState
This is "nn::hid::NpadHandheldState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadJoyDualLifo
This is "nn::hid::detail::NpadJoyDualLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadJoyDualStateAtomicStorage |
NpadJoyDualStateAtomicStorage
This is "nn::hid::detail::NpadJoyDualStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadJoyDualState |
NpadJoyDualState
This is "nn::hid::NpadJoyDualState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadJoyLeftLifo
This is "nn::hid::detail::NpadJoyLeftLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadJoyLeftStateAtomicStorage |
NpadJoyLeftStateAtomicStorage
This is "nn::hid::detail::NpadJoyLeftStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadJoyLeftState |
NpadJoyLeftState
This is "nn::hid::NpadJoyLeftState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadJoyRightLifo
This is "nn::hid::detail::NpadJoyRightLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadJoyRightStateAtomicStorage |
NpadJoyRightStateAtomicStorage
This is "nn::hid::detail::NpadJoyRightStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadJoyRightState |
NpadJoyRightState
This is "nn::hid::NpadJoyRightState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadPalmaLifo
This is "nn::hid::detail::NpadPalmaLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadPalmaStateAtomicStorage |
NpadPalmaStateAtomicStorage
This is "nn::hid::detail::NpadPalmaStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadPalmaState |
NpadPalmaState
This is "nn::hid::NpadPalmaState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadSystemLifo
This is "nn::hid::detail::NpadSystemLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadSystemStateAtomicStorage |
NpadSystemStateAtomicStorage
This is "nn::hid::detail::NpadSystemStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadSystemState |
NpadSystemState
This is "nn::hid::system::NpadSystemState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadSystemExtLifo
This is "nn::hid::detail::NpadSystemExtLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x30 * 17 | Array of #NpadSystemExtStateAtomicStorage |
NpadSystemExtStateAtomicStorage
This is "nn::hid::detail::NpadSystemExtStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x28 | #NpadSystemExtState |
NpadSystemExtState
This is "nn::hid::system::NpadSystemExtState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | Buttons |
0x10 | 0x8 | AnalogStickL |
0x18 | 0x8 | AnalogStickR |
0x20 | 0x4 | Attributes |
0x24 | 0x4 | Reserved |
NpadSixAxisSensorLifo
This is "nn::hid::detail::NpadSixAxisSensorLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x68 * 17 | Array of #SixAxisSensorStateAtomicStorage |
SixAxisSensorStateAtomicStorage
This is "nn::hid::detail::SixAxisSensorStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x60 | #SixAxisSensorState |
SixAxisSensorState
This is "nn::hid::SixAxisSensorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | DeltaTime |
0x8 | 0x8 | SamplingNumber |
0x10 | 0x4 | AccelerationX |
0x14 | 0x4 | AccelerationY |
0x18 | 0x4 | AccelerationZ |
0x1C | 0x4 | AngularVelocityX |
0x20 | 0x4 | AngularVelocityY |
0x24 | 0x4 | AngularVelocityZ |
0x28 | 0x4 | AngleX |
0x2C | 0x4 | AngleY |
0x30 | 0x4 | AngleZ |
0x34 | 0x24 | Direction |
0x58 | 0x4 | Attributes |
0x5C | 0x4 | Reserved |
NfcXcdDeviceHandleState
This is "nn::hid::detail::NfcXcdDeviceHandleState". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x20 * 2 | Array of #NfcXcdDeviceHandleStateImplAtomicStorage |
NfcXcdDeviceHandleStateImplAtomicStorage
This is "nn::hid::detail::NfcXcdDeviceHandleStateImplAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x18 | #NfcXcdDeviceHandleStateImpl |
NfcXcdDeviceHandleStateImpl
This is "nn::hid::detail::NfcXcdDeviceHandleStateImpl".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Handle |
0x8 | 0x1 | IsAvailable |
0x9 | 0x1 | IsActivated |
0xA | 0x6 | Reserved |
0x10 | 0x8 | SamplingNumber |
NpadGcTriggerLifo
This is "nn::hid::detail::NpadGcTriggerLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x18 * 17 | Array of #NpadGcTriggerStateAtomicStorage |
NpadGcTriggerStateAtomicStorage
This is "nn::hid::detail::NpadGcTriggerStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x10 | #NpadGcTriggerState |
NpadGcTriggerState
This is "nn::hid::server::NpadGcTriggerState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | TriggerL |
0xC | 0x4 | TriggerR |
This is "nn::hid::detail::GestureSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x708 | #GestureLifo |
GestureLifo
This is "nn::hid::detail::GestureLifo". This is a RingLifo object.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | RingLifoVptr |
0x8 | 0x8 | BufferCount |
0x10 | 0x8 | Tail |
0x18 | 0x8 | Count |
0x20 | 0x68 * 17 | Array of #GestureDummyStateAtomicStorage |
GestureDummyStateAtomicStorage
This is "nn::hid::detail::GestureDummyStateAtomicStorage".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x60 | #GestureDummyState |
GestureDummyState
This is "nn::hid::detail::GestureDummyState" / "nn::hid::GestureState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | ContextNumber |
0x10 | 0x4 | Type |
0x14 | 0x4 | Direction |
0x18 | 0x4 | X |
0x1C | 0x4 | Y |
0x20 | 0x4 | s32 DeltaX |
0x24 | 0x4 | s32 DeltaY |
0x28 | 0x4 | float VelocityX |
0x2C | 0x4 | float VelocityY |
0x30 | 0x4 | Attributes |
0x34 | 0x4 | Scale |
0x38 | 0x4 | RotationAngle |
0x3C | 0x4 | s32 PointCount |
0x40 | 0x8 * 4 | Points |
This is "nn::hid::detail::ConsoleSixAxisSensorSharedMemoryFormat".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x1 | IsSevenSixAxisSensorAtRest |
0x9 | 0x3 | Padding |
0xC | 0x4 | VerticalizationError |
0x10 | 0xC | GyroBias |
AnalogStickState
This is "nn::hid::AnalogStickState".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | X |
0x4 | 0x4 | Y |
TouchState
This is "nn::hid::TouchState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | DeltaTime |
0x8 | 0x4 | Attributes |
0xC | 0x4 | FingerId |
0x10 | 0x4 | X |
0x14 | 0x4 | Y |
0x18 | 0x4 | DiameterX |
0x1C | 0x4 | DiameterY |
0x20 | 0x4 | RotationAngle |
0x24 | 0x4 | Reserved |
TouchScreenConfigurationForNx
This is "nn::hid::TouchScreenConfigurationForNx".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | Mode |
0x8 | 0xF | Reserved |
TouchScreenModeForNx
This is "nn::hid::TouchScreenModeForNx".
Value | Description |
---|---|
0 | UseSystemSetting |
1 | Finger |
2 | Heat2 |
InputSourceState
This is "nn::hid::system::InputSourceState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Timestamp |
NpadControllerColor
This is "nn::hid::NpadControllerColor".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Main |
0x4 | 0x4 | Sub |
NpadFullKeyColorState
This is "nn::hid::detail::NpadFullKeyColorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Attribute |
0x4 | 0x8 | FullKey |
NpadJoyColorState
This is "nn::hid::detail::NpadJoyColorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Attribute |
0x4 | 0x8 | Left |
0xC | 0x8 | Right |
DirectionState
This is "nn::hid::DirectionState".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | XX |
0x4 | 0x4 | XY |
0x8 | 0x4 | XZ |
0xC | 0x4 | YX |
0x10 | 0x4 | YY |
0x14 | 0x4 | YZ |
0x18 | 0x4 | ZX |
0x1C | 0x4 | ZY |
0x20 | 0x4 | ZZ |
GesturePoint
This is "nn::hid::GesturePoint".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | X |
0x4 | 0x4 | Y |
ColorAttribute
This is "nn::hid::detail::ColorAttribute".
Value | Description |
---|---|
0 | Ok |
1 | ReadError |
2 | NoController |
DebugPadAttributeSet
This is "nn::hid::DebugPadAttributeSet". This is a BitFlagSet object for #DebugPadAttribute.
DebugPadAttribute
This is "nn::hid::DebugPadAttribute". This is a 32-bit flag.
Bit | Description |
---|---|
0 | IsConnected |
TouchAttributeSet
This is "nn::hid::TouchAttributeSet". This is a BitFlagSet object for #TouchAttribute.
TouchAttribute
This is "nn::hid::TouchAttribute". This is a 32-bit flag.
Bit | Description |
---|---|
0 | Start |
1 | End |
MouseAttributeSet
This is "nn::hid::MouseAttributeSet". This is a BitFlagSet object for #MouseAttribute.
MouseAttribute
This is "nn::hid::MouseAttribute". This is a 32-bit flag.
Bit | Description |
---|---|
0 | Transferable |
1 | IsConnected |
BasicXpadAttributeSet
This is "nn::hid::BasicXpadAttributeSet". This is a BitFlagSet object for #BasicXpadAttribute.
NpadAttributesSet
This is "nn::hid::NpadAttributesSet". This is a BitFlagSet object for #NpadAttribute.
NpadAttribute
This is "nn::hid::NpadAttribute". This is a 32-bit flag.
Bit | Description |
---|---|
0 | IsConnected |
1 | IsWired |
2 | IsLeftConnected |
3 | IsLeftWired |
4 | IsRightConnected |
5 | IsRightWired |
SixAxisSensorAttributeSet
This is "nn::hid::SixAxisSensorAttributeSet". This is a BitFlagSet object for #SixAxisSensorAttribute.
SixAxisSensorAttribute
This is "nn::hid::SixAxisSensorAttribute". This is a 32-bit flag.
Bit | Description |
---|---|
0 | IsConnected |
1 | IsInterpolated |
GestureAttributeSet
This is "nn::hid::GestureAttributeSet". This is a BitFlagSet object for #GestureAttribute.
GestureAttribute
This is "nn::hid::GestureAttribute". This is a 32-bit flag.
Bit | Description |
---|---|
4 | IsNewTouch |
8 | IsDoubleTap |
DebugPadButtonSet
This is "nn::hid::DebugPadButtonSet". This is a BitFlagSet object for #DebugPadButton.
DebugPadButton
This is "nn::hid::DebugPadButton". This is a 32-bit flag.
Bit | Description |
---|---|
0 | A |
1 | B |
2 | X |
3 | Y |
4 | L |
5 | R |
6 | ZL |
7 | ZR |
8 | Start |
9 | Select |
10 | Left |
11 | Up |
12 | Right |
13 | Down |
MouseButtonSet
This is "nn::hid::MouseButtonSet". This is a BitFlagSet object for #MouseButton.
MouseButton
This is "nn::hid::MouseButton". This is a 32-bit flag.
Bit | Description |
---|---|
0 | Left |
1 | Right |
2 | Middle |
3 | Forward |
4 | Back |
KeyboardModifierSet
This is "nn::hid::KeyboardModifierSet". This is a BitFlagSet object for #KeyboardModifier.
KeyboardModifier
This is "nn::hid::KeyboardModifier". This is a 32-bit flag.
Bit | Description |
---|---|
0 | Control |
1 | Shift |
2 | LeftAlt |
3 | RightAlt |
4 | Gui |
8 | CapsLock |
9 | ScrollLock |
10 | NumLock |
11 | Katakana |
12 | Hiragana |
KeyboardKeySet
This is "nn::hid::KeyboardKeySet". This is a BitFlagSet object for #KeyboardKey.
KeyboardKey
This is "nn::hid::KeyboardKey". This is a 256-bit flag.
Bit | Description |
---|---|
4 | A |
5 | B |
6 | C |
7 | D |
8 | E |
9 | F |
10 | G |
11 | H |
12 | I |
13 | J |
14 | K |
15 | L |
16 | M |
17 | N |
18 | O |
19 | P |
20 | Q |
21 | R |
22 | S |
23 | T |
24 | U |
25 | V |
26 | W |
27 | X |
28 | Y |
29 | Z |
30 | D1 |
31 | D2 |
32 | D3 |
33 | D4 |
34 | D5 |
35 | D6 |
36 | D7 |
37 | D8 |
38 | D9 |
39 | D0 |
40 | Return |
41 | Escape |
42 | Backspace |
43 | Tab |
44 | Space |
45 | Minus |
46 | Plus |
47 | OpenBracket |
48 | CloseBracket |
49 | Pipe |
50 | Tilde |
51 | Semicolon |
52 | Quote |
53 | Backquote |
54 | Comma |
55 | Period |
56 | Slash |
57 | CapsLock |
58 | F1 |
59 | F2 |
60 | F3 |
61 | F4 |
62 | F5 |
63 | F6 |
64 | F7 |
65 | F8 |
66 | F9 |
67 | F10 |
68 | F11 |
69 | F12 |
70 | PrintScreen |
71 | ScrollLock |
72 | Pause |
73 | Insert |
74 | Home |
75 | PageUp |
76 | Delete |
77 | End |
78 | PageDown |
79 | RightArrow |
80 | LeftArrow |
81 | DownArrow |
82 | UpArrow |
83 | NumLock |
84 | NumPadDivide |
85 | NumPadMultiply |
86 | NumPadSubtract |
87 | NumPadAdd |
88 | NumPadEnter |
89 | NumPad1 |
90 | NumPad2 |
91 | NumPad3 |
92 | NumPad4 |
93 | NumPad5 |
94 | NumPad6 |
95 | NumPad7 |
96 | NumPad8 |
97 | NumPad9 |
98 | NumPad0 |
99 | NumPadDot |
100 | Backslash |
101 | Application |
102 | Power |
103 | NumPadEquals |
104 | F13 |
105 | F14 |
106 | F15 |
107 | F16 |
108 | F17 |
109 | F18 |
110 | F19 |
111 | F20 |
112 | F21 |
113 | F22 |
114 | F23 |
115 | F24 |
133 | NumPadComma |
135 | Ro |
136 | KatakanaHiragana |
137 | Yen |
138 | Henkan |
139 | Muhenkan |
140 | NumPadCommaPc98 |
144 | HangulEnglish |
145 | Hanja |
146 | Katakana |
147 | Hiragana |
148 | ZenkakuHankaku |
224 | LeftControl |
225 | LeftShift |
226 | LeftAlt |
227 | LeftGui |
228 | RightControl |
229 | RightShift |
230 | RightAlt |
231 | RightGui |
KeyboardLockKeyEventSet
This is "nn::hid::system::KeyboardLockKeyEventSet". This is a BitFlagSet object for #KeyboardLockKeyEvent.
KeyboardLockKeyEvent
This is "nn::hid::system::KeyboardLockKeyEvent". This is a 32-bit flag.
Bit | Description |
---|---|
0 | NumLockOn |
1 | NumLockOff |
2 | NumLockToggle |
3 | CapsLockOn |
4 | CapsLockOff |
5 | CapsLockToggle |
6 | ScrollLockOn |
7 | ScrollLockOff |
8 | ScrollLockToggle |
BasicXpadButtonSet
This is "nn::hid::BasicXpadButtonSet". This is a BitFlagSet object for #BasicXpadButton.
HomeButtonSet
This is "nn::hid::system::HomeButtonSet". This is a BitFlagSet object for #HomeButton.
SleepButtonSet
This is "nn::hid::system::SleepButtonSet". This is a BitFlagSet object for #SleepButton.
CaptureButtonSet
This is "nn::hid::system::CaptureButtonSet". This is a BitFlagSet object for #CaptureButton.
NpadButtonSet
This is "nn::hid::NpadButtonSet". This is a BitFlagSet object for #NpadButton.
NpadButton
This is "nn::hid::NpadButton". This is a 64-bit flag.
Bit | Description |
---|---|
0 | A |
1 | B |
2 | X |
3 | Y |
4 | StickL |
5 | StickR |
6 | L |
7 | R |
8 | ZL |
9 | ZR |
10 | Plus |
11 | Minus |
12 | Left |
13 | Up |
14 | Right |
15 | Down |
16 | StickLLeft |
17 | StickLUp |
18 | StickLRight |
19 | StickLDown |
20 | StickRLeft |
21 | StickRUp |
22 | StickRRight |
23 | StickRDown |
24 | LeftSL |
25 | LeftSR |
26 | RightSL |
27 | RightSR |
28 | Palma |
29 | Verification |
30 | HandheldLeftB (Left B button on NES controllers in Handheld mode) |
31 | [12.0.0+] LeftC (Left C button in N64 controller) |
32 | [12.0.0+] UpC (Up C button in N64 controller) |
33 | [12.0.0+] RightC (Right C button in N64 controller) |
34 | [12.0.0+] DownC (Down C button in N64 controller) |
AnalogStickCalibrationFlagsSet
This is "nn::hid::detail::AnalogStickCalibrationFlagsSet". This is a BitFlagSet object for #AnalogStickCalibrationFlags.
SixAxisSensorUserCalibrationFlagsSet
This is "nn::hid::detail::SixAxisSensorUserCalibrationFlagsSet". This is a BitFlagSet object for #SixAxisSensorUserCalibrationFlags.
NpadStyleSet
This is "nn::hid::NpadStyleSet". This is a BitFlagSet object for #NpadStyleTag.
NpadStyleTag
This is "nn::hid::NpadStyleTag".
Bits | Description |
---|---|
0 | NpadStyleFullKey (Pro Controller) |
1 | NpadStyleHandheld (Joy-Con controller in handheld mode) |
2 | NpadStyleJoyDual (Joy-Con controller in dual mode) |
3 | NpadStyleJoyLeft (Joy-Con left controller in single mode) |
4 | NpadStyleJoyRight (Joy-Con right controller in single mode) |
5 | NpadStyleGc (GameCube controller) |
6 | NpadStylePalma (Poké Ball Plus controller) |
7 | NpadStyleLark (NES/Famicom controller) |
8 | NpadStyleHandheldLark (NES/Famicom controller in handheld mode) |
9 | NpadStyleLucia (SNES controller) |
10 | [12.0.0+] NpadStyleLagon (N64 controller) |
11 | [13.0.0+] NpadStyleLager (Sega Genesis controller) |
12-28 | Reserved |
29 | NpadStyleSystemExt (generic external controller) |
30 | NpadStyleSystem (generic controller) |
31 | Reserved |
NpadDeviceTypeSet
This is "nn::hid::system::NpadDeviceTypeSet". This is a BitFlagSet object for NpadDeviceType.
NpadSystemPropertiesSet
This is "nn::hid::detail::NpadSystemPropertiesSet". This is a BitFlagSet object for #NpadSystemProperties.
NpadSystemProperties
This is "nn::hid::detail::NpadSystemProperties". This is a 64-bit flag.
Bit | Description |
---|---|
0 | IsChargingJoyDual |
1 | IsChargingJoyLeft |
2 | IsChargingJoyRight |
3 | IsPoweredJoyDual |
4 | IsPoweredJoyLeft |
5 | IsPoweredJoyRight |
9 | IsUnsuportedButtonPressedOnNpadSystem |
10 | IsUnsuportedButtonPressedOnNpadSystemExt |
11 | IsAbxyButtonOriented |
12 | IsSlSrButtonOriented |
13 | [4.0.0+] IsPlusAvailable |
14 | [4.0.0+] IsMinusAvailable |
15 | [8.0.0+] IsDirectionalButtonsAvailable |
NpadSystemButtonPropertiesSet
This is "nn::hid::detail::NpadSystemButtonPropertiesSet". This is a BitFlagSet object for #NpadSystemButtonProperties.
NpadSystemButtonProperties
This is "nn::hid::NpadSystemButtonProperties". This is a 32-bit flag.
Bit | Description |
---|---|
0 | IsUnintendedHomeButtonInputProtectionEnabled |
This is "nn::hid::system::AppletFooterUiAttributesSet". This is a BitFlagSet object for #AppletFooterUiAttribute.
UniquePadType
This is "nn::hid::system::UniquePadType".
Value | Description |
---|---|
0 | Embedded |
1 | FullKeyController |
2 | RightController |
3 | LeftController |
4 | DebugPadController |
UniquePadInterface
This is "nn::hid::system::UniquePadInterface".
Value | Description |
---|---|
0 | Embedded |
1 | Rail |
2 | Bluetooth |
3 | Usb |
UniquePadSerialNumber
This is "nn::hid::system::UniquePadSerialNumber". This is a 0x10 byte value.
UniquePadId
This is "nn::hid::system::UniquePadId". This is a 8 byte value.
AnalogStickManualCalibrationStage
This is "nn::hid::system::AnalogStickManualCalibrationStage".
Value | Description |
---|---|
0 | ReleaseFromRight |
1 | ReleaseFromBottom |
2 | ReleaseFromLeft |
3 | ReleaseFromTop |
4 | Rotate |
5 | Update |
6 | Completed |
7 | Clear |
8 | ClearCompleted |
SixAxisSensorUserCalibrationStage
This is "nn::hid::system::SixAxisSensorUserCalibrationStage".
Value | Description |
---|---|
0 | Measuring |
1 | Update |
2 | Completed |
NpadJoyHoldType
This is "nn::hid::NpadJoyHoldType".
Value | Description |
---|---|
0 | Vertical |
1 | Horizontal |
NpadJoyDeviceType
This is "nn::hid::NpadJoyDeviceType".
Value | Description |
---|---|
0 | Left |
1 | Right |
NpadHandheldActivationMode
This is "nn::hid::NpadHandheldActivationMode".
This controls how many joycons must be attached for handheld mode to be triggered (Dual = 2, Single = 1, None = 0).
Value | Description |
---|---|
0 | Dual |
1 | Single |
2 | None |
NpadJoyAssignmentMode
This is "nn::hid::NpadJoyAssignmentMode".
Value | Description |
---|---|
0 | Dual |
1 | Single |
NpadCommunicationMode
This is "nn::hid::NpadCommunicationMode".
Value | Description |
---|---|
0 | 5ms |
1 | 10ms |
2 | 15ms |
3 | Default |
FirmwareVersion
This is "nn::hid::system::FirmwareVersion" ([1.0.0-2.3.0] "nn::hid::debug::FirmwareVersion").
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | Major |
0x1 | 0x1 | Minor |
0x2 | 0x1 | Micro |
0x3 | 0x1 | Revision |
0x4 | 0xC | [3.0.0+] #DeviceIdentifier |
DeviceIdentifier
Value | Description |
---|---|
"JR" | Joy-Con right controller |
"JL" | Joy-Con left controller |
"FK" | Pro Controller |
"MY" | MiyabiLeft and MiyabiRight |
"LC" | Tarragon and Tarragon2 |
"HL" | Famicom left controller |
"HR" | Famicom right controller (with microphone) |
"NL" | NES left controller |
"NR" | NES right controller |
"SN" | SNES controller |
"LT" | N64 controller |
"LS" | Sega Genesis controller |
"PB" | Poké Ball Plus controller |
"SH" | SioH |
"TS" | TouchScreen |
AppletDetailedUiType
This is "nn::hid::system::AppletDetailedUiType".
Value | Description |
---|---|
0x00000000 | None |
0x01000000 | HandheldNone |
0x02000000 | HandheldJoyConLeftOnly |
0x02000001 | HandheldLarkHvc1Only |
0x02000002 | HandheldLarkNesLeftOnly |
0x03000000 | HandheldJoyConRightOnly |
0x03000001 | HandheldLarkHvc2Only |
0x03000002 | HandheldLarkNesRightOnly |
0x04000000 | HandheldJoyConLeftJoyConRight |
0x04000001 | HandheldJoyConLeftLarkHvc2 |
0x04000002 | HandheldJoyConLeftLarkNesRight |
0x04000003 | HandheldLarkHvc1JoyConRight |
0x04000004 | HandheldLarkHvc1LarkHvc2 |
0x04000005 | HandheldLarkHvc1LarkNesRight |
0x04000006 | HandheldLarkNesLeftJoyConRight |
0x04000007 | HandheldLarkNesLeftLarkHvc2 |
0x04000008 | HandheldLarkNesLeftLarkNesRight |
0x05000000 | JoyDual |
0x06000000 | JoyDualLeftOnly |
0x07000000 | JoyDualRightOnly |
0x08000000 | JoyLeftHorizontal |
0x09000000 | JoyLeftVertical |
0x0A000000 | JoyRightHorizontal |
0x0B000000 | JoyRightVertical |
0x0C000000 | SwitchProController |
0x0D000000 | CompatibleProController |
0x0E000000 | CompatibleJoyCon |
0x0F000000 | LarkHvc1 |
0x10000000 | LarkHvc2 |
0x11000000 | LarkNesLeft |
0x12000000 | LarkNesRight |
0x13000000 | LuciaU |
0x13000001 | LuciaJ |
0x13000002 | LuciaE |
0x14000000 | Verification |
0x15000000 | [13.0.0+] Lagon |
0xFFFFFFFF | Unknown |
This is "nn::hid::system::AppletFooterUiType".
Value | Description |
---|---|
0 | None |
1 | HandheldNone |
2 | HandheldJoyConLeftOnly |
3 | HandheldJoyConRightOnly |
4 | HandheldJoyConLeftJoyConRight |
5 | JoyDual |
6 | JoyDualLeftOnly |
7 | JoyDualRightOnly |
8 | JoyLeftHorizontal |
9 | JoyLeftVertical |
10 | JoyRightHorizontal |
11 | JoyRightVertical |
12 | SwitchProController |
13 | CompatibleProController |
14 | CompatibleJoyCon |
15 | LarkHvc1 |
16 | LarkHvc2 |
17 | LarkNesLeft |
18 | LarkNesRight |
19 | Lucia |
20 | Verification |
21 | [13.0.0+] Lagon |
NpadIdType
This is "nn::hid::NpadIdType". This is the controller index used in sharedmem.
Value | Description |
---|---|
0x0 | No1 |
0x1 | No2 |
0x2 | No3 |
0x3 | No4 |
0x4 | No5 |
0x5 | No6 |
0x6 | No7 |
0x7 | No8 |
0x10 | Other |
0x20 | Handheld |
NpadInterfaceType
This is "nn::hid::NpadInterfaceType".
Value | Description |
---|---|
1 | Bluetooth |
2 | Rail |
3 | Usb |
4 | Embedded |
NpadLarkType
This is "nn::hid::NpadLarkType".
Value | Description |
---|---|
0 | Invalid |
1 | H1 |
2 | H2 |
3 | NL |
4 | NR |
NpadLuciaType
This is "nn::hid::NpadLuciaType".
Value | Description |
---|---|
0 | Invalid |
1 | J |
2 | E |
3 | U |
NpadLagerType
This is "nn::hid::NpadLagerType".
Value | Description |
---|---|
0 | Invalid |
1 | J |
2 | E |
3 | U |
SixAxisSensorProperties
This is "nn::hid::server::SixAxisSensorProperties".
Bit | Description |
---|---|
0 | IsSixAxisSensorDeviceNewlyAssigned |
1 | IsFirmwareUpdateAvailableForSixAxisSensor |
GestureDirection
This is "nn::hid::GestureDirection".
Value | Description |
---|---|
0 | None |
1 | Left |
2 | Up |
3 | Right |
4 | Down |
GestureType
This is "nn::hid::GestureType".
Value | Description |
---|---|
0 | Idle |
1 | Complete |
2 | Cancel |
3 | Touch |
4 | Press |
5 | Tap |
6 | Pan |
7 | Swipe |
8 | Pinch |
9 | Rotate |
DeviceHandle
This is "nn::xcd::DeviceHandle". This is a 8 byte value.
DeviceType
This is "nn::hid::system::DeviceType".
Bits | Description |
---|---|
0 | FullKey |
1 | DebugPad |
2 | HandheldLeft |
3 | HandheldRight |
4 | JoyLeft |
5 | JoyRight |
6 | Palma |
7 | LarkHvcLeft |
8 | LarkHvcRight |
9 | LarkNesLeft |
10 | LarkNesRight |
11 | HandheldLarkHvcLeft |
12 | HandheldLarkHvcRight |
13 | HandheldLarkNesLeft |
14 | HandheldLarkNesRight |
15 | Lucia |
16 | [12.0.0+] Lagon |
17 | [13.0.0+] Lager |
18-30 | Reserved |
31 | System |
DeviceTypeInternal
This is "nn::hid::detail::DeviceTypeInternal".
[9.0.0+] This has been superseded by DeviceType.
Bits | Description |
---|---|
0-7 | BIT(N*4+0) = Pro Controller, BIT(N*4+1) = Joy-Con Left, BIT(N*4+2) = Joy-Con Right, BIT(N*4+3) = invalid. Where N is 0-1. |
8-10 | Pro Controller |
11 | Famicom left controller |
12 | Famicom right controller (with microphone) |
13 | NES left controller |
14 | NES right controller |
15-16 | Invalid |
17 | Generic external controller |
18-20 | Invalid |
21-23 | Generic controller |
DeviceType
This is "nn::hidtypes::DeviceType".
Value | Description |
---|---|
0 | Unknown |
1 | JoyConRight |
2 | JoyConLeft |
3 | SwitchProController |
4 | MiyabiLeft |
5 | MiyabiRight |
6 | Tarragon |
7 | LarkH1 |
8 | LarkH2 |
9 | LarkNL |
10 | LarkNR |
11 | Lucia |
12 | Palma |
13 | GcOnGggg |
14 | FiftyL |
15 | UsbPad |
16 | WinGenericPad |
17 | Sio |
18 | FiftyR |
19 | DebugSwitchProControllerCompatibleDevice |
20 | DebugJoyConLeftCompatibleDevice |
21 | DebugJoyConRightCompatibleDevice |
22 | [12.0.0+] Lagon |
23 | [12.0.0+] ExternalGrip |
24 | [13.0.0+] SwitchProControllerDfu |
25 | [13.0.0+] ExternalGripDfu |
26 | [13.0.0+] LuciaDfu |
27 | [13.0.0+] LagonDfu |
28 | [13.0.0+] Lager |
29 | [14.0.0+] LagerDfu |
30 | [14.0.0+] Tarragon2 |
JoyConRight
Joy-Con right controller. USB PID is 0x2007.
JoyConLeft
Joy-Con left controller. USB PID is 0x2006.
SwitchProController
Pro Controller. USB PID is 0x2009.
Tarragon
Licensed Pro Controller.
LarkH1
Famicom left controller.
LarkH2
Famicom right controller (with microphone).
LarkNL
NES left controller.
LarkNR
NES right controller.
Lucia
SNES controller. USB PID is 0x2017.
Palma
Poké Ball Plus controller.
GcOnGggg
GameCube controller.
Lagon
N64 controller. USB PID is 0x2019.
ExternalGrip
Joy-Con Charging Grip. USB PID is 0x200E.
SwitchProControllerDfu
"Kotetsu" (Pro Controller MCU) in DFU mode. USB PID is 0x200F.
ExternalGripDfu
"Kuina" (Joy-Con Charging Grip MCU) in DFU mode. USB PID is 0x2008.
LuciaDfu
SNES controller MCU in DFU mode. USB PID is 0x2018.
LagonDfu
N64 controller MCU in DFU mode. USB PID is 0x201A.
Lager
Sega Genesis controller. USB PID is 0x201E.
LagerDfu
Sega Genesis controller MCU in DFU mode. USB PID is 0x201F.
Tarragon2
Licensed Pro Controller.
VidPidDefinition
This is "nn::hidtypes::VidPidDefinition".
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | Vid |
0x2 | 0x2 | PidRangeMax |
0x4 | 0x2 | PidRangeMin |
0x6 | 0x1 | DeviceType |
0x7 | 0x1 | Reserved |
VidPidDefinitions
This is "nn::hidtypes::detail::VidPidDefinitions". This is a list of VidPidDefinition objects maintained by the hid-sysmodule.
Vid | PidRangeMax | PidRangeMin | DeviceType |
---|---|---|---|
0x57E | 0x2006 | 0x2006 | 2 |
0x57E | 0x2007 | 0x2007 | 1 |
0x57E | 0x2009 | 0x2009 | 3 |
0x57E | 0x200F | 0x200F | 24 |
0x57E | 0x200E | 0x200E | 23 |
0x57E | 0x2008 | 0x2008 | 25 |
0x57E | 0x2017 | 0x2017 | 11 |
0x57E | 0x2018 | 0x2018 | 26 |
0x57E | 0x2019 | 0x2019 | 22 |
0x57E | 0x201A | 0x201A | 27 |
0x57E | 0x201E | 0x201E | 28 |
0x57E | 0x201F | 0x201F | 29 |
0x57E | 0x337 | 0x337 | 13 |
0x57E | 0x300E | 0x300E | [17.0.0+] 18 |
0x57E | 0x300D | 0x300D | [17.0.0+] 14 |
0xF0D | 0x92 | 0x92 | 15 |
0xF0D | 0xAB | 0xAA | 15 |
0xF0D | 0xC1 | 0xC1 | 15 |
0xF0D | 0xFF | 0xF0 | 15 |
0xF0D | 0x22F | 0x200 | 15 |
0xE6F | 0x193 | 0x180 | 15 |
0x20D6 | 0xA719 | 0xA710 | 15 |
0x20D6 | 0xA729 | 0xA720 | 15 |
0x33DD | 0xB | 0x1 | 15 |
NpadPowerInfo
This is "nn::hid::system::NpadPowerInfo".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | IsPowered |
0x1 | 0x1 | IsCharging |
0x2 | 0x6 | Reserved |
0x8 | 0x4 | BatteryLevel |
BatteryLevel
This is "nn::hid::system::NpadBatteryLevel". This is a 4 byte value.
ConsoleSixAxisSensorHandle
This is "nn::hid::ConsoleSixAxisSensorHandle". This is a 4-byte struct with 4-byte alignment.
sdknso GetConsoleSixAxisSensorHandle always returns a handle with value 0x13.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | TypeValue |
0x0 | 0x1 | |
0x1 | 0x1 |
SixAxisSensorHandle
This is "nn::hid::SixAxisSensorHandle". This is a 4-byte struct with 4-byte alignment.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | TypeValue |
0x0 | 0x1 | NpadStyleIndex |
0x1 | 0x1 | PlayerNumber |
0x2 | 0x1 | DeviceIdx |
VibrationDeviceHandle
This is "nn::hid::VibrationDeviceHandle". This is a 4-byte struct with 4-byte alignment.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | TypeValue |
0x0 | 0x1 | NpadStyleIndex |
0x1 | 0x1 | PlayerNumber |
0x2 | 0x1 | DeviceIdx |
VibrationDeviceInfo
This is "nn::hid::VibrationDeviceInfo" / "nn::hid::VibrationDeviceInfoForIpc". This is a 0x8-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | DeviceType |
0x4 | 0x4 | Position |
VibrationDeviceType
This is "nn::hid::VibrationDeviceType".
Value | Description |
---|---|
0 | Unknown |
1 | LinearResonantActuator |
2 | GcErm |
3 | Erm |
VibrationDevicePosition
This is "nn::hid::VibrationDevicePosition".
Value | Description |
---|---|
0 | None |
1 | Left |
2 | Right |
VibrationValue
This is "nn::hid::VibrationValue". This is a 0x10-byte struct, which contains 4 float values.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | AmplitudeLow |
0x4 | 0x4 | FrequencyLow |
0x8 | 0x4 | AmplitudeHigh |
0xC | 0x4 | FrequencyHigh |
VibrationGcErmCommand
This is "nn::hid::VibrationGcErmCommand".
Value | Name | Description |
---|---|---|
0 | Stop | Stops the vibration with a decay phase. |
1 | Start | Starts the vibration. |
2 | StopHard | Stops the vibration immediately, with no decay phase. |
AccelerometerPlayMode
This is "nn::hid::debug::AccelerometerPlayMode" (pre-10.0.0 this is "nn::hid::AccelerometerPlayMode").
Value | Description |
---|---|
0 | Loose |
1 | Tight |
GyroscopeZeroDriftMode
This is "nn::hid::GyroscopeZeroDriftMode".
Value | Description |
---|---|
0 | Loose |
1 | Standard |
2 | Tight |
PalmaConnectionHandle
This is "nn::hid::PalmaConnectionHandle". This is a 0x8-byte struct with 8-byte alignment.
PalmaOperationInfo
This is "nn::hid::PalmaOperationInfo". This is a 0x148-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #PalmaOperationType |
0x4 | 0x4 | Result |
0x8 | 0x140 | Buffer for #GetPalmaOperationInfo. |
PalmaOperationType
This is "nn::hid::PalmaOperationType".
Value | Description |
---|---|
0 | PlayActivity |
1 | SetFrModeType |
2 | ReadStep |
3 | EnableStep |
4 | ResetStep |
5 | ReadApplicationSection |
6 | WriteApplicationSection |
7 | ReadUniqueCode |
8 | SetUniqueCodeInvalid |
9 | WriteActivityEntry |
10 | WriteRgbLedPatternEntry |
11 | WriteWaveEntry |
12 | ReadDataBaseIdentificationVersion |
13 | WriteDataBaseIdentificationVersion |
14 | SuspendFeature |
15 | [5.1.0+] ReadPlayLog |
16 | [5.1.0+] ResetPlayLog |
PalmaFrModeType
This is "nn::hid::PalmaFrModeType".
Value | Description |
---|---|
0 | Off |
1 | B01 |
2 | B02 |
3 | B03 |
4 | Downloaded |
PalmaApplicationSectionAccessBuffer
This is "nn::hid::PalmaApplicationSectionAccessBuffer". This is a 0x100-byte struct.
PalmaActivityEntry
This is "nn::hid::PalmaActivityEntry".
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | RgbLedPatternIndex. |
0x2 | 0x2 | Padding |
0x4 | 0x4 | WaveSet. |
0x8 | 0x2 | WaveIndex. |
PalmaWaveSet
This is "nn::hid::PalmaWaveSet".
Value | Description |
---|---|
0 | Small |
1 | Medium |
2 | Large |
PalmaFeature
This is "nn::hid::PalmaFeature".
Bit | Description |
---|---|
0 | FrMode |
1 | RumbleFeedback |
2 | Step |
3 | MuteSwitch |
AbstractedPadState
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Type, only 1 bit can be set. Converted to #HdlsDeviceInfo::type internally by #SetAutoPilotVirtualPadState. |
0x4 | 0x1 | Flags. #SetAutoPilotVirtualPadState only uses bit0: when clear it will skip using the rest of the input and run #UnsetAutoPilotVirtualPadState internally. |
0x5 | 0x3 | Padding |
0x8 | 0x4 | RGBA Single Body Color |
0xC | 0x4 | RGBA Single Buttons Color |
0x10 | 0x1 | See #HiddbgHdlsDeviceInfo::#NpadInterfaceType. |
0x11 | 0x3 | Padding |
0x14 | 0x24 | #HdlsState. Unknown if the last 4-bytes are included in this struct, #SetAutoPilotVirtualPadState/#hiddbgGetAbstractedPadsState only uses the first 0x20-bytes. |
0x38 | 0x60 | Unused with #SetAutoPilotVirtualPadState/#GetAbstractedPadsState. |
Normally the input state is merged with an existing controller selected by Type. However in some cases (BIT(2-5) with type2!=0x2 and BIT(31)) it's detected as a dedicated controller.
Type:
Bits | #HdlsDeviceInfo::type bits | Description | Notes |
---|---|---|---|
0 | 0 | ||
1 | 15 | #DeviceType |= BIT(1) | |
2 | 1 | ||
3 | 2 | ||
4 | 1 | ||
5 | 2 | ||
6 | 3 | ||
7 | 11 | #DeviceType |= BIT(11) | |
8 | 12 | #DeviceType |= BIT(12) | |
9 | 13 | #DeviceType |= BIT(13) | |
10 | 14 | #DeviceType |= BIT(14) | |
11 | 15 | #DeviceType |= BIT(11) | |
12 | 12 | #DeviceType |= BIT(12) | |
13 | 13 | #DeviceType |= BIT(13) | |
14 | 14 | #DeviceType |= BIT(14) | |
15 | 17 | ||
31 | 21 | #DeviceType = BIT(31) |
The above "#DeviceType |=" notes only apply when type2 is 0x2.
DebugPadAutoPilotState
This is "nn::hid::debug::DebugPadAutoPilotState"
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Attributes |
0x4 | 0x4 | Buttons |
0x8 | 0x8 | AnalogStickL |
0x10 | 0x8 | AnalogStickR |
MouseAutoPilotState
This is "nn::hid::debug::MouseAutoPilotState".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | X |
0x4 | 0x4 | Y |
0x8 | 0x4 | DeltaX |
0xC | 0x4 | DeltaY |
0x10 | 0x4 | WheelDelta |
0x14 | 0x4 | Buttons |
0x18 | 0x4 | Attributes |
KeyboardAutoPilotState
This is "nn::hid::debug::KeyboardAutoPilotState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Modifiers |
0x8 | 0x20 | Keys |
SleepButtonAutoPilotState
This is "nn::hid::debug::SleepButtonAutoPilotState". This is a 0x8-byte struct with 8-byte alignment.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Buttons (only bit0 is used) |
PowerInfo
This is "nn::hidtypes::PowerInfo".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | BatteryLevel |
0x4 | 0x4 | #PowerAttribute |
PowerAttribute
This is "nn::hidtypes::PowerAttribute". This is a 32-bit flag.
Bits | Description |
---|---|
0 | IsPowered |
1 | IsCharging |
HdlsAttribute
This is "nn::hidtypes::HdlsAttribute". This is a 32-bit flag.
Bits | Description |
---|---|
0 | HasVirtualSixAxisSensorAcceleration |
1 | HasVirtualSixAxisSensorAngle |
HdlsHandle
This is "nn::hid::debug::HdlsHandle". This is a 0x8-byte struct with 8-byte alignment.
HdlsSessionId
This is "nn::hid::debug::detail::HdlsSessionId". This is a 0x8-byte struct with 8-byte alignment.
HdlsNpadAssignment
This is a 0x208-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | s32 Total entries |
0x4 | 0x4 | Padding |
0x8 | 0x200(0x20*0x10) | Array of #HdlsNpadAssignmentEntry. |
HdlsNpadAssignmentEntry
This is a 0x20-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | #HdlsHandle |
0x8 | 0x4 | ? |
0xC | 0x4 | ? |
0x10 | 0x8 | ? |
0x18 | 0x1 | ? |
0x19 | 0x7 | Padding |
HdlsStateList
This is a 0x408-byte struct.
[9.0.0+] This is a 0x488-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | s32 Total entries |
0x4 | 0x4 | Padding |
0x8 | <#HdlsStateListEntry size>*0x10 | Array of #HdlsStateListEntry. |
This contains a list of all controllers, including non-virtual controllers.
HdlsStateListEntry
This is a 0x40-byte struct.
[9.0.0+] This is a 0x48-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | #HdlsHandle |
0x8 | #HdlsDeviceInfo size | #HdlsDeviceInfo. With #ApplyHdlsStateList this is only used when creating new devices. |
0x8 + #HdlsDeviceInfo size, with 8-byte alignment | 0x24 | #HdlsState |
<Immediately following the above> | 0x4 | Padding |
HdlsDeviceInfo
This is "nn::hid::debug::HdlsDeviceInfo". This is a 0x10-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #DeviceTypeInternal |
0x4 | 0x4 | RGBA Single Body Color |
0x8 | 0x4 | RGBA Single Buttons Color |
0xC | 0x1 | #NpadInterfaceType. Additional type field used with the above type field, if the value doesn't match one of the following a default is used. Type Pro-Controller: value 0x3 indicates that the controller is connected via USB. Type bit21: value 0x3 = unknown. When value is 0x2, state is merged with an existing controller (when the type value is compatible with this). Otherwise, it's a dedicated controller. |
0xD | 0x3 | Padding |
[9.0.0+] This is a 0x14-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | #DeviceTypeInternal |
0x1 | 0x1 | #NpadInterfaceType. Similar to the field from the old struct. |
0x2 | 0x2 | Padding |
0x4 | 0x4 | RGBA Single Body Color |
0x8 | 0x4 | RGBA Single Buttons Color |
0xC | 0x4 | RGBA Left Grip Color |
0x10 | 0x4 | RGBA Right Grip Color |
HdlsState
This is "nn::hid::debug::HdlsState". This is a 0x24-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | IsPowered for the main PowerInfo. |
0x1 | 0x1 | ORRed with IsPowered to set the value of the first byte for the controller #NpadSystemProperties. |
0x2 | 0x6 | Unknown |
0x8 | 0x4 | BatteryLevel for the main PowerInfo. |
0xC | 0x4 | Buttons. Bit18 = HOME and bit19 = Capture. |
0x10 | 0x10(4*2*2) | Joystick data. |
0x20 | 0x1 | Indicator. Unused for input. Set with output from #DumpHdlsStates (zero in some cases). |
0x21 | 0x3 | Padding |
[9.0.0+] (0x28-bytes):
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | #PowerInfo |
0x8 | 0x8 | Buttons, masked with 0xfffffffff00fffff. See above table regarding HOME/Capture buttons. |
0x10 | 0x10(4*2*2) | Joystick data. |
0x20 | 0x1 | Indicator. Unused for input. Set with output from #DumpHdlsStates (zero in some cases). |
0x21 | 0x7 | Padding |
[12.0.0+] (0x40-bytes):
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | #PowerInfo |
0x8 | 0x8 | Buttons, masked with 0xfffffffff00fffff. See above table regarding HOME/Capture buttons. |
0x10 | 0x10(4*2*2) | Joystick data. |
0x20 | 0xC | VirtualSixAxisSensorAcceleration |
0x2C | 0xC | VirtualSixAxisSensorAngle |
0x38 | 0x4 | #HdlsAttribute |
0x3C | 0x1 | Indicator. Unused for input. |
0x3D | 0x3 | Padding |
DebugRegisteredDevice
This is "nn::hid::debug::RegisteredDevice". This is a 0x58-byte struct with 2-byte alignment.
RegisteredDevice
This is "nn::hid::system::RegisteredDevice". This is a 0x68-byte struct with 4-byte alignment.
NotificationLedPattern
This is "nn::hid::system::NotificationLedPattern". This is a 0x48-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | TimeUnit |
0x1 | 0x1 | FrameCount |
0x2 | 0x1 | CycleCount |
0x3 | 0x1 | InitialBrightness |
0x4 | 0x4 * 15 | Frames |
0x40 | 0x1 | FinalBrightness |
0x41 | 0x1 | TimeTowardsFinalBrightness |
0x42 | 0x6 | Reserved |
Frame
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | Brightness |
0x1 | 0x1 | TimeTowards |
0x2 | 0x1 | TimeToHold |
0x3 | 0x1 | Reserved |
SystemButtonConfigEmbedded
This is "nn::hid::system::ButtonConfigEmbedded". This is a 0x2C8-byte struct.
SystemButtonConfigFull
This is "nn::hid::system::ButtonConfigFull". This is a 0x2C8-byte struct.
SystemButtonConfigLeft
This is "nn::hid::system::ButtonConfigLeft". This is a 0x1C8-byte struct.
SystemButtonConfigRight
This is "nn::hid::system::ButtonConfigRight". This is a 0x1A0-byte struct.
ButtonConfigEmbedded
This is "nn::hidconfig::ButtonConfigEmbedded". This is a 0x54-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | HardwareButtonLeft |
0x4 | 0x4 | HardwareButtonUp |
0x8 | 0x4 | HardwareButtonRight |
0xC | 0x4 | HardwareButtonDown |
0x10 | 0x4 | HardwareButtonA |
0x14 | 0x4 | HardwareButtonB |
0x18 | 0x4 | HardwareButtonX |
0x1C | 0x4 | HardwareButtonY |
0x20 | 0x4 | HardwareButtonStickL |
0x24 | 0x4 | HardwareButtonStickR |
0x28 | 0x4 | HardwareButtonL |
0x2C | 0x4 | HardwareButtonR |
0x30 | 0x4 | HardwareButtonZL |
0x34 | 0x4 | HardwareButtonZR |
0x38 | 0x4 | HardwareButtonSelect |
0x3C | 0x4 | HardwareButtonStart |
0x40 | 0x4 | HardwareButtonCapture |
0x44 | 0x8 | HardwareStickL |
0x4C | 0x8 | HardwareStickR |
DigitalButtonAssignment
This is "nn::hidconfig::DigitalButtonAssignment".
Value | Description |
---|---|
0 | A |
1 | B |
2 | X |
3 | Y |
4 | StickL |
5 | StickR |
6 | L |
7 | R |
8 | ZL |
9 | ZR |
10 | Select |
11 | Start |
12 | Left |
13 | Up |
14 | Right |
15 | Down |
16 | LeftSL |
17 | LeftSR |
18 | RightSL |
19 | RightSR |
20 | HomeButton |
21 | CaptureButton |
22 | Invalid |
AnalogStickAssignment
This is "nn::hidconfig::AnalogStickAssignment".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #AnalogStickRotation |
0x4 | 0x1 | IsPairedStickAssigned |
0x5 | 0x3 | Reserved |
AnalogStickRotation
This is "nn::hidconfig::AnalogStickRotation".
Value | Description |
---|---|
0 | None |
1 | Clockwise90 |
2 | Anticlockwise90 |
ButtonConfigFull
This is "nn::hidconfig::ButtonConfigFull". This is a 0x54-byte struct.
This is identical to #ButtonConfigEmbedded.
ButtonConfigLeft
This is "nn::hidconfig::ButtonConfigLeft". This is a 0x34-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | HardwareButtonLeft |
0x4 | 0x4 | HardwareButtonUp |
0x8 | 0x4 | HardwareButtonRight |
0xC | 0x4 | HardwareButtonDown |
0x10 | 0x4 | HardwareButtonStickL |
0x14 | 0x4 | HardwareButtonL |
0x18 | 0x4 | HardwareButtonZL |
0x1C | 0x4 | HardwareButtonSelect |
0x20 | 0x4 | HardwareButtonLeftSL |
0x24 | 0x4 | HardwareButtonLeftSR |
0x28 | 0x4 | HardwareButtonCapture |
0x2C | 0x8 | HardwareStickL |
ButtonConfigRight
This is "nn::hidconfig::ButtonConfigRight". This is a 0x30-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | HardwareButtonA |
0x4 | 0x4 | HardwareButtonB |
0x8 | 0x4 | HardwareButtonX |
0xC | 0x4 | HardwareButtonY |
0x10 | 0x4 | HardwareButtonStickR |
0x14 | 0x4 | HardwareButtonR |
0x18 | 0x4 | HardwareButtonZR |
0x1C | 0x4 | HardwareButtonStart |
0x20 | 0x4 | HardwareButtonRightSL |
0x24 | 0x4 | HardwareButtonRightSR |
0x28 | 0x8 | HardwareStickR |
StorageName
This is "nn::hidconfig::StorageName". This is a 0x81-byte struct.
This is an UTF-8 NUL-terminated name string.
InterfaceType
This is "nn::hidtypes::InterfaceType".
Value | Description |
---|---|
1 | Bluetooth |
2 | Rail |
3 | Usb |
4 | Embedded |
DigitalButton
This is "nn::hidtypes::DigitalButton". This is a 64-bit flag.
Bit | Description |
---|---|
0 | A |
1 | B |
2 | X |
3 | Y |
4 | StickL |
5 | StickR |
6 | L |
7 | R |
8 | ZL |
9 | ZR |
10 | Start |
11 | Select |
12 | Left |
13 | Up |
14 | Right |
15 | Down |
16 | SL |
17 | SR |
18 | Home |
19 | Shot |
20 | StickLLeft |
21 | StickLUp |
22 | StickLRight |
23 | StickLDown |
24 | StickRLeft |
25 | StickRUp |
26 | StickRRight |
27 | StickRDown |
28 | Palma |
29 | HandheldLeftB |
30 | Plus |
31 | Minus |
32 | Z |
33 | LeftSL |
34 | LeftSR |
35 | RightSL |
36 | RightSR |
37 | LeftC |
38 | UpC |
39 | RightC |
40 | DownC |
AssignmentStyle
This is "nn::hidtypes::AssignmentStyle". This is a 32-bit flag.
Bit | Description |
---|---|
0 | IsExternalAssigned |
1 | IsExternalLeftAssigned |
2 | IsExternalRightAssigned |
3 | IsHandheldAssigned |
4 | IsHandheldLeftAssigned |
5 | IsHandheldRightAssigned |
FeatureType
This is "nn::hidtypes::FeatureType". This is a 64-bit flag.
Bit | Description |
---|---|
0 | HasLeftAnalogStick |
1 | HasRightAnalogStick |
2 | HasLeftJoySixAxisSensor |
3 | HasRightJoySixAxisSensor |
4 | HasFullKeySixAxisSensor |
5 | HasLeftLraVibrationDevice |
6 | HasRightLraVibrationDevice |
7 | HasGcVibrationDevice |
8 | HasErmVibrationDevice |
9 | HasLeftJoyRailBus |
10 | HasRightJoyRailBus |
11 | HasInternalBus |
12 | IsPalma |
13 | HasNfc |
14 | HasIrSensor |
15 | IsAnalogStickCalibrationSupported |
16 | IsSixAxisSensorUserCalibrationSupported |
17 | HasLeftJoyRightJoyBattery |
18 | HasFullKeyBattery |
19 | IsDisconnectControllerIfBatteryNone |
20 | HasControllerColor |
21 | HasGripColor |
22 | HasIdentificationCode |
23 | HasBluetoothAddress |
24 | HasMcu |
25 | HasNotificationLed |
26 | HasDirectionalButtons |
27 | HasIndicatorLed |
28 | IsButtonConfigEmbeddedSupported |
29 | IsButtonConfigFullSupported |
30 | IsButtonConfigLeftSupported |
31 | IsButtonConfigRightSupported |
32 | IsUsbHidDevice |
33 | IsKuinaDevice |
34 | IsDirectUsbToBtSwitchingDevice |
35 | IsNormalizeAnalogStickWithInnerCross |
Color
This is "nn::hidtypes::Color".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | BodyColor |
0x4 | 0x4 | ButtonColor |
0x8 | 0x4 | LeftGripColor |
0xC | 0x4 | RightGripColor |
DeviceDescriptorType
This is "nn::hidtypes::DeviceDescriptorType".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | DeviceType |
0x1 | 0x7 | Reserved |
0x8 | 0x8 | FeatureType |
0x10 | 0x8 | DigitalButton |
0x18 | 0x4 | AssignmentStyle |
0x1C | 0x10 | DeviceColor |
0x2C | 0x4 | Reserved |
DeviceDescriptionList
This is "nn::hidtypes::detail::DeviceDescriptionList". This is a list of DeviceDescriptorType objects maintained by the hid-sysmodule.
DeviceType | FeatureType | DigitalButton | AssignmentStyle | DeviceColor |
---|---|---|---|---|
1 | 0x18BDBE44A | 0x18F0406AF | 0x24 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
2 | 0x14CDB8225 | 0x6F8F950 | 0x12 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
3 | 0x72BBDA073 | 0xFFCFFFF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
4 | 0x108000025 | 0x6F8F950 | 0x2 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
5 | 0x10800004A | 0x18F0406AF | 0x4 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
6 | 0x108800013 | 0xFFCFFFF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
7 | 0x108CA0000 | 0x2008FCC3 | 0x11 | 0xFF322891, 0xFFFFFFFF, 0x00000000, 0x00000000 |
8 | 0x108CA0800 | 0x4F0C3 | 0x21 | 0xFF322891, 0xFFFFFFFF, 0x00000000, 0x00000000 |
9 | 0x108CA0000 | 0x2008FCC3 | 0x11 | 0xFFD9D7D7, 0xFFFFFFFF, 0x00000000, 0x00000000 |
10 | 0x108CA0000 | 0x4FCC3 | 0x21 | 0xFFD9D7D7, 0xFFFFFFFF, 0x00000000, 0x00000000 |
11 | 0x700CC0000 | 0xFFCF | 0x0 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
12 | 0x841011 | 0x10000010 | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
13 | 0x83 | 0xFF0F6CF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
14 | 0x1 | 0xF8F950 | 0x10 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
15 | 0x3 | 0xFFCFFFF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
16 | 0x3 | 0xFFCFFFF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
17 | 0x1001A013 | 0xFFCFFFF | 0x8 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
18 | 0x2 | 0xF0406AF | 0x20 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
19 | 0x1088DA073 | 0xFFCF3FF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
20 | 0x108CA0025 | 0x6F8F150 | 0x12 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
21 | 0x108CA604A | 0x18F0402AF | 0x24 | 0xFF828282, 0xFF0F0F0F, 0x00000000, 0x00000000 |
[12.0.0+] 22 | 0xF00CC8101 | 0x1E1FCF6C3 | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
[12.0.0+] 23 | 0x100000000 | 0x0 | 0x0 | 0x00000000, 0x00000000, 0x00000000, 0x00000000 |
[13.0.0+] 28 | 0x700CC0000 | 0xCF6CF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
[14.0.0+] 30 | 0x108800003 | 0xFFCFFFF | 0x1 | 0xFF2D2D2D, 0xFFE6E6E6, 0xFF464646, 0xFF464646 |
UnmaskFeatureDescriptorType
This is "nn::hid::server::UnmaskFeatureDescriptorType".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | DeviceType |
0x1 | 0x1 | InterfaceType |
0x2 | 0x6 | Reserved |
0x8 | 0x8 | FeatureType |
UnmaskFeatureDescriptorList
This is "nn::hid::server::UnmaskFeatureDescriptorList". This is a list of UnmaskFeatureDescriptorType objects maintained by the hid-sysmodule.
DeviceType | InterfaceType | FeatureType |
---|---|---|
3 | 3 | 0x2000 |
2 | 2 | 0x200 |
1 | 2 | 0x400 |
19 | 3 | 0x2000 |
2 | 3 | 0x200 |
1 | 3 | 0x6400 |
FirmwareVersionInfo
This is "nn::hidtypes::FirmwareVersionInfo".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | FirmwareVersionAttribute |
0x4 | 0x2 | |
0x6 | 0x2 | MajorVersion |
0x8 | 0x2 | MinorVersion |
0xA | 0x2 |
FirmwareVersionAttribute
This is "nn::hidtypes::FirmwareVersionAttribute". This is a 32-bit flag.
Bit | Description |
---|---|
0 | IsCustomerCodeCorruption |
1 | IsIapCorrupted |
IrCameraHandle
This is "nn::irsensor::IrCameraHandle".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | PlayerNumber |
0x1 | 0x1 | DeviceType |
0x2 | 0x2 | Reserved |
IrCameraStatus
This is "nn::irsensor::IrCameraStatus".
Value | Description |
---|---|
0 | Available |
1 | Unsupported |
2 | Unconnected |
IrCameraInternalStatus
This is "nn::irsensor::IrCameraInternalStatus".
Value | Description |
---|---|
0 | Stopped |
1 | FirmwareUpdateNeeded |
2 | |
3 | |
4 | |
5 | FirmwareVersionRequested |
6 | FirmwareVersionIsInvalid |
7 | [4.0.0+] Ready |
8 | [4.0.0+] Setting |
IrSensorMode
This is "nn::irsensor::detail::StatusManager::IrSensorMode".
Value | Description |
---|---|
0 | None |
1 | MomentProcessor |
2 | ClusteringProcessor |
3 | ImageTransferProcessor |
4 | PointingProcessorMarker |
5 | TeraPluginProcessor |
6 | Unknown |
ImageProcessorStatus
This is "nn::irsensor::ImageProcessorStatus".
Value | Description |
---|---|
0 | Stopped |
1 | Running |
ImageTransferProcessorFormat
This is "nn::irsensor::ImageTransferProcessorFormat".
This controls the IR Sensor image resolution.
Value | Description |
---|---|
0 | 320x240 |
1 | 160x120 |
2 | 80x60 |
3 | [4.0.0+] 40x30 |
4 | [4.0.0+] 20x15 |
MomentProcessorConfig
This is "nn::irsensor::MomentProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime (default is 0x493E0) |
0x8 | 0x4 | LightTarget (default is 0) |
0xC | 0x4 | Gain (default is 0x8) |
0x10 | 0x1 | IsNegativeImageUsed (default is 0) |
0x11 | 0x7 | Reserved |
0x18 | 0x2 | WindowOfInterestX (default is 0) |
0x1A | 0x2 | WindowOfInterestY (default is 0) |
0x1C | 0x2 | WindowOfInterestWidth (default is 0x140) |
0x1E | 0x2 | WindowOfInterestHeight (default is 0xF0) |
0x20 | 0x4 | Preprocess (default is 0x1) |
0x24 | 0x4 | PreprocessIntensityThreshold (default is 0x50) |
PackedMomentProcessorConfig
This is "nn::irsensor::PackedMomentProcessorConfig".
This is converted from #MomentProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime (default is 0x493E0) |
0x8 | 0x1 | LightTarget (default is 0) |
0x9 | 0x1 | Gain (default is 0x8) |
0xA | 0x1 | IsNegativeImageUsed (default is 0) |
0xB | 0x5 | Reserved |
0x10 | 0x2 | WindowOfInterestX (default is 0) |
0x12 | 0x2 | WindowOfInterestY (default is 0) |
0x14 | 0x2 | WindowOfInterestWidth (default is 0x140) |
0x16 | 0x2 | WindowOfInterestHeight (default is 0xF0) |
0x18 | 0x4 | RequiredMcuVersion |
0x1C | 0x1 | Preprocess (default is 0x1) |
0x1D | 0x1 | PreprocessIntensityThreshold (default is 0x50) |
0x1E | 0x2 | Reserved |
ClusteringProcessorConfig
This is "nn::irsensor::ClusteringProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime (default is 200000) |
0x8 | 0x4 | LightTarget (default is 0) |
0xC | 0x4 | Gain (default is 0x2) |
0x10 | 0x1 | IsNegativeImageUsed (default is 0) |
0x11 | 0x7 | Reserved |
0x18 | 0x2 | WindowOfInterestX (default is 0) |
0x1A | 0x2 | WindowOfInterestY (default is 0) |
0x1C | 0x2 | WindowOfInterestWidth (default is 320) |
0x1E | 0x2 | WindowOfInterestHeight (default is 240) |
0x20 | 0x4 | ObjectPixelCountMin (default is 0x3) |
0x24 | 0x4 | ObjectPixelCountMax (default is 0x12C00) |
0x28 | 0x4 | ObjectIntensityMin (default is 150) |
0x2C | 0x1 | IsExternalLightFilterEnabled (default is 0x1) |
PackedClusteringProcessorConfig
This is "nn::irsensor::PackedClusteringProcessorConfig".
This is converted from #ClusteringProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x1 | LightTarget |
0x9 | 0x1 | Gain |
0xA | 0x1 | IsNegativeImageUsed |
0xB | 0x5 | Reserved |
0x10 | 0x2 | WindowOfInterestX |
0x12 | 0x2 | WindowOfInterestY |
0x14 | 0x2 | WindowOfInterestWidth |
0x16 | 0x2 | WindowOfInterestHeight |
0x18 | 0x4 | RequiredMcuVersion |
0x1C | 0x4 | ObjectPixelCountMin |
0x20 | 0x4 | ObjectPixelCountMax |
0x24 | 0x1 | ObjectIntensityMin |
0x25 | 0x1 | IsExternalLightFilterEnabled |
0x26 | 0x2 | Reserved |
ImageTransferProcessorConfig
This is "nn::irsensor::ImageTransferProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x4 | LightTarget |
0xC | 0x4 | Gain |
0x10 | 0x1 | IsNegativeImageUsed |
0x11 | 0x7 | Reserved |
0x18 | 0x4 | Format |
PackedImageTransferProcessorConfig
This is "nn::irsensor::PackedImageTransferProcessorConfig".
This is converted from #ImageTransferProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x1 | LightTarget |
0x9 | 0x1 | Gain |
0xA | 0x1 | IsNegativeImageUsed |
0xB | 0x5 | Reserved |
0x10 | 0x4 | RequiredMcuVersion |
0x14 | 0x1 | Format |
0x15 | 0x3 | Reserved |
ImageTransferProcessorState
This is "nn::irsensor::ImageTransferProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x4 | Reserved |
TeraPluginProcessorConfig
This is "nn::irsensor::TeraPluginProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | Mode |
0x1 | 0x1 | |
0x2 | 0x1 | |
0x3 | 0x1 |
PackedTeraPluginProcessorConfig
This is "nn::irsensor::PackedTeraPluginProcessorConfig".
This is converted from #TeraPluginProcessorConfig. The data starting at offset 0x5 is only initialized by the user-process with [6.0.0+].
#TeraPluginProcessorConfig +0x0, +0x2, and +0x3 are copied to +0x4, 0x6, and +0x7 here. +0x5 here is set to 0x2 | (#TeraPluginProcessorConfig+0x1 << 7).
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | RequiredMcuVersion |
0x4 | 0x1 | Mode |
0x5 | 0x1 | |
0x6 | 0x1 | |
0x7 | 0x1 |
PointingProcessorConfig
This is "nn::irsensor::PointingProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | WindowOfInterestX (default is 0) |
0x2 | 0x2 | WindowOfInterestY (default is 0) |
0x4 | 0x2 | WindowOfInterestWidth (default is 320) |
0x6 | 0x2 | WindowOfInterestHeight (default is 240) |
PackedPointingProcessorConfig
This is "nn::irsensor::PackedPointingProcessorConfig".
This is converted from #PointingProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | WindowOfInterestX (default is 0) |
0x2 | 0x2 | WindowOfInterestY (default is 0) |
0x4 | 0x2 | WindowOfInterestWidth (default is 320) |
0x6 | 0x2 | WindowOfInterestHeight (default is 240) |
0x8 | 0x4 | RequiredMcuVersion |
PackedMcuVersion
This is "nn::irsensor::PackedMcuVersion".
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | MajorVersion |
0x2 | 0x2 | MinorVersion |
Versions
MajorVersion | MinorVersion | SystemVersion |
---|---|---|
0x3 | 0xB | [1.0.0+] |
0x4 | 0x12 | [4.0.0+] |
0x5 | 0x18 | [5.0.0+] |
0x6 | 0x1A | [6.0.0+] |
0x8 | 0x1B | [8.0.0+] |
PackedFunctionLevel
This is nn::irsensor::PackedFunctionLevel.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | #IrSensorFunctionLevel |
0x1 | 0x3 | Reserved |
IrSensorFunctionLevel
This is "nn::irsensor::IrSensorFunctionLevel".
Value | SystemVersion |
---|---|
0 | [1.0.0+] |
1 | [4.0.0+] |
2 | [5.0.0+] |
3 | [6.0.0+] |
4 | [8.0.0+] |
ImageTransferProcessorExConfig
This is "nn::irsensor::ImageTransferProcessorExConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x4 | LightTarget |
0xC | 0x4 | Gain |
0x10 | 0x1 | IsNegativeImageUsed |
0x11 | 0x7 | Reserved |
0x18 | 0x4 | OrigFormat |
0x1C | 0x4 | TrimmingFormat |
0x20 | 0x2 | TrimmingStartX |
0x22 | 0x2 | TrimmingStartY |
0x24 | 0x1 | IsExternalLightFilterEnabled |
PackedImageTransferProcessorExConfig
This is "nn::irsensor::PackedImageTransferProcessorExConfig".
This is converted from #ImageTransferProcessorExConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x1 | LightTarget |
0x9 | 0x1 | Gain |
0xA | 0x1 | IsNegativeImageUsed |
0xB | 0x5 | Reserved |
0x10 | 0x4 | RequiredMcuVersion |
0x14 | 0x1 | OrigFormat |
0x15 | 0x1 | TrimmingFormat |
0x16 | 0x2 | TrimmingStartX |
0x18 | 0x2 | TrimmingStartY |
0x1A | 0x1 | IsExternalLightFilterEnabled |
0x1B | 0x5 | Reserved |
IrLedProcessorConfig
This is "nn::irsensor::IrLedProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | LightTarget |
PackedIrLedProcessorConfig
This is "nn::irsensor::PackedIrLedProcessorConfig".
This is converted from #IrLedProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | RequiredMcuVersion |
0x4 | 0x1 | LightTarget |
0x5 | 0x3 | Padding |
AdaptiveClusteringProcessorConfig
This is "nn::irsensor::AdaptiveClusteringProcessorConfig".
AdaptiveClusteringProcessor was added with [5.0.0+].
This is converted to #TeraPluginProcessorConfig by the user-process. #TeraPluginProcessorConfig+0x3 is zero.
The default config is all-zero.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #AdaptiveClusteringMode |
0x4 | 0x4 | [6.0.0+] #AdaptiveClusteringTargetDistance |
AdaptiveClusteringMode
Value | Description |
---|---|
0 | StaticFov |
1 | DynamicFov |
Controls the mode for #TeraPluginProcessorConfig (DynamicFov -> 0x10; StaticFov -> 0x0F).
AdaptiveClusteringTargetDistance
Value | Description |
---|---|
0 | Near |
1 | Middle |
2 | Far |
Controls the second and third bytes for #TeraPluginProcessorConfig (Near-> 0x00, 0x00; Middle -> 0x01, 0x03; Far -> 0x01, 0x08).
HandAnalysisConfig
This is "nn::irsensor::HandAnalysisConfig".
This is converted to #TeraPluginProcessorConfig by the user-process, which is all-zero except the mode.
- pre-4.0.0: #TeraPluginProcessorConfig mode = #HandAnalysisMode - 1.
- [4.0.0+]: Silhouette = 0x5, Image = 0x6, SilhouetteAndImage = 0x7, SilhouetteOnly = 0xA.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #HandAnalysisMode |
HandAnalysisMode
Value | Description |
---|---|
0 | None (invalid) |
1 | Silhouette |
2 | Image |
3 | SilhouetteAndImage |
4 | [4.0.0+] SilhouetteOnly |
BusHandle
This is "nn::hidbus::BusHandle".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | AbstractedPadId |
0x4 | 0x1 | InternalIndex |
0x5 | 0x1 | PlayerNumber |
0x6 | 0x1 | BusTypeId |
0x7 | 0x1 | IsValid |
JoyPollingReceivedData
This is "nn::hidbus::JoyPollingReceivedData".
This is copied from the entries in TransferMemory by GetJoyPollingReceivedData.
Offset | Size | Description |
---|---|---|
0x0 | 0x30 | Data |
0x30 | 0x8 | OutSize |
0x38 | 0x8 | SamplingNumber |
BusType
This is "nn::hidbus::BusType".
Value | Description |
---|---|
0 | LeftJoyRail |
1 | RightJoyRail |
2 | [6.0.0+] InternalBus (for Lark microphone) |
JoyPollingMode
This is "nn::hidbus::JoyPollingMode".
Value | Description |
---|---|
0 | SixAxisSensorDisable |
1 | SixAxisSensorEnable |
2 | ButtonOnly |
Other values causes #EnableJoyPollingReceiveMode to assert.
StatusManagerType
This is "nn::hidbus::detail::StatusManagerType".
Value | Description |
---|---|
0 | None |
1 | 16 |
2 | 32 |
ExternalDevices
The following devices are used via hidbus:
- Ring-Con
- Famicom right controller (with microphone)
- BusType is 2 (InternalBus).
- DeviceId is 0x21 ("LarkMic").
- SendAndReceive is not used. EnableJoyPollingReceiveMode is used where the input buffer is an u32 with value 0, #JoyPollingMode = 2. GetJoyPollingReceivedData is used to get the output data.
- "Starlink: Battle For Atlas" controller mount
- BusType is 1 (RightJoyRail).
- DeviceId is 0x28 ("Flight").
- EnableJoyPollingReceiveMode is used where the input buffer is an u16 with value 0x09, #JoyPollingMode = 0. SendAndReceive is called from 1 func. GetJoyPollingReceivedData is used to determine whether to call the same func which calls SendAndReceive, which is only done if
out_size==0x4 && data[0]==0x09 && (data[1] & 1 == 1)
.
RomFS
The hid-sysmodule RomFS contains:
ftmFwUpdate ├── NTD_4CD_1801.fts256 ├── NTD_4CD_2602.fts256 ├── NTD_4CD_3801.fts256 └── NTD_4CD_xxxx.fts256 [7.0.0+]
These are firmware files for the touchscreen controller.
[9.0.0+] The hid-sysmodule RomFS now contains:
ftmFwUpdate ├── FTS_00120100.fts256 ├── FTS_32000001.fts256 ├── FTS_32000102.fts256 ├── FTS_32000302.fts256 └── FTS_32000402.fts256
[10.0.0+] The RomFs for hid-sysmodule was removed. The data which used to be in RomFs was moved into title 0100000000000822.
Firmware Update
HID-sysmodule mounts the contents of title 0100000000000822 as "systemData" or the contents of title 010000000000B22B as "systemDataD". Both titles contain the same files, but 0100000000000822 is used on retail units while 010000000000B22B is used for development.
These titles contain the following files:
- ExpectVersionInfo.csv
- List in the format "[device],[type],[version]" where "device" can be "JoyLeft", "JoyRight", "FullKey", "Palma" or "Handheld", "type" can be "BT", "MCU", "USB" or "SioH" and "version" is the hexadecimal representation of the firmware file's version.
- FirmwareInfo.csv
- List in the format "[device],[type],[version],[file]" where "device", "type" and "version" should match the values from "ExpectVersionInfo" and "file" is the name of the firmware file.
- ukyosakyo_ep2_ota.bin
- Left/Right Joy-Con BT firmware.
- raizo_ep2_ota.bin
- Pro Controller BT firmware.
- tera_ota.bin
- Right Joy-Con MCU firmware.
- tera_ota_iap.bin
- Right Joy-Con MCU (IAP profile) firmware.
- tera_fullkey_ota.bin
- Pro Controller MCU firmware.
- tera_fullkey_ota_iap.bin
- Pro Controller MCU (IAP profile) firmware.
- [6.0.0+] ProController.dfu
- Pro Controller USB firmware.
- [6.1.0+] PalmaFw.bin
- Poké Ball Plus BT firmware.
- [8.1.1+] ExpectVersionInfo-platform.hoag.csv
- Same as "ExpectVersionInfo.csv" but for the Switch Lite platform.
- [8.1.1+] FirmwareInfo-platform.hoag.csv
- Same as "FirmwareInfo.csv" but for the Switch Lite platform.
- [8.1.1+] sioh.bin
- Switch Lite Joy-Con firmware.
- [8.1.1+] sioh_iap.bin
- Switch Lite Joy-Con (IAP profile) firmware.
- [10.0.0+] FTS_00120100.fts256
- Touch Screen controller firmware in FTS256 format.
- [10.0.0+] FTS_32000001.fts256
- Touch Screen controller firmware in FTS256 format for panel vendor "Nissha".
- [10.0.0+] FTS_32000102.fts256
- Touch Screen controller firmware in FTS256 format for panel vendor "GIS".
- [10.0.0+] FTS_32000302.fts256
- Touch Screen controller firmware in FTS256 format for panel vendor "Nissha_Hoag".
- [10.0.0+] FTS_32000402.fts256
- Touch Screen controller firmware in FTS256 format for panel vendor "GIS_Hoag".
- [10.0.0+] TouchScreenConfiguration.csv
- List in the format "[gpio],[gpio],[gpio],[config],[config]" where "gpio" can be "0" or "1" and "config" is an integer number.
- [10.0.0+] TouchScreenFirmwareInfo.csv
- List in the format "[driver],[gpio],[gpio],[gpio],[version],[file]" where "driver" can be "FTM" or "FST2", "gpio" can be "0" or "1", "version" is the hexadecimal representation of the firmware file's version and "file" is the name of the firmware file.
- [13.0.0+] FTS_33000510.fts256
- Touch Screen controller firmware in FTS256 format for panel vendor "Samsung_Aula".
- [13.0.0] FTS_98000004.ftb
- Touch Screen controller firmware in FTB format.
- [13.1.0-13.2.1] FTS_50000001.ftb
- Touch Screen controller firmware in FTB format for panel vendor "Nissha".
- [14.0.0+] FTS_50000002.ftb
- Touch Screen controller firmware in FTB format for panel vendor "Nissha".
Versions
Ukyosakyo
SystemVersion | FirmwareVersion |
---|---|
[1.0.0+] | 0348 |
[5.0.0+] | 0389 |
[6.0.0+] | 038B |
[7.0.0+] | 03A6 |
[8.0.0+] | 03B5 |
[9.0.0+] | 0400 |
[10.0.0+] | 0406 |
[11.0.0+] | 0407 |
[12.1.0+] | 0410 |
[13.0.0+] | 0417 |
[14.0.0+] | 0419 |
Raizo
SystemVersion | FirmwareVersion |
---|---|
[1.0.0+] | 0348 |
[15.0.0+] | 0421 |
Tera
SystemVersion | FirmwareVersion |
---|---|
[1.0.0+] | 030B |
[4.0.0+] | 0412 |
[5.0.0+] | 0518 |
[6.0.0+] | 061A |
[8.0.0+] | 081B |
TeraFullKey
SystemVersion | FirmwareVersion |
---|---|
[1.0.0+] | 0305 |
ProController
SystemVersion | FirmwareVersion |
---|---|
- | 010A0200 |
[6.0.0+] | 01100210 |
Palma
SystemVersion | FirmwareVersion |
---|---|
- | 1100 |
[6.1.0+] | 1200 |
SioH
SystemVersion | FirmwareVersion |
---|---|
- | 000D |
[8.1.1+] | 0200 |
[10.0.0+] | 0301 |
[11.0.0+] | 0304 |