Difference between revisions of "TSEC"

From Nintendo Switch Brew
Jump to navigation Jump to search
Line 950: Line 950:
  
 
=== TSEC_THI_METHOD0 ===
 
=== TSEC_THI_METHOD0 ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-11
 +
| TSEC_THI_METHOD0_OFFSET
 +
|}
 +
 +
Used to encode and send a method's ID over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.
 +
 +
The following methods are available:
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
!  ID
 
!  ID
Line 1,138: Line 1,149:
 
|}
 
|}
  
−
Used to encode and send a method's ID over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.
+
=== TSEC_THI_METHOD1 ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| TSEC_THI_METHOD1_DATA
 +
|}
  
−
=== TSEC_THI_METHOD1 ===
 
 
Used to encode and send a method's data over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.
 
Used to encode and send a method's data over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.
  
Line 1,504: Line 1,521:
  
 
=== FALCON_MAILBOX0 ===
 
=== FALCON_MAILBOX0 ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_MAILBOX0_DATA
 +
|}
 +
 
Scratch register for reading/writing data to Falcon.
 
Scratch register for reading/writing data to Falcon.
  
 
=== FALCON_MAILBOX1 ===
 
=== FALCON_MAILBOX1 ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_MAILBOX1_DATA
 +
|}
 +
 
Scratch register for reading/writing data to Falcon.
 
Scratch register for reading/writing data to Falcon.
  
Line 1,553: Line 1,586:
  
 
=== FALCON_DEBUGINFO ===
 
=== FALCON_DEBUGINFO ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_DEBUGINFO_DATA
 +
|}
 +
 
Used for UCODE self revocation. This register takes the base address of the GSC carveout shifted right by 8.
 
Used for UCODE self revocation. This register takes the base address of the GSC carveout shifted right by 8.
  
Line 1,590: Line 1,631:
  
 
=== FALCON_RSTAT0 ===
 
=== FALCON_RSTAT0 ===
−
Mirror of the ICD status register 0.
+
Mirror of the [[#FALCON_ICD_RDATA|ICD status register 0]].
  
 
=== FALCON_RSTAT3 ===
 
=== FALCON_RSTAT3 ===
−
Mirror of the ICD status register 3.
+
Mirror of the [[#FALCON_ICD_RDATA|ICD status register 3]].
  
 
=== FALCON_CPUCTL ===
 
=== FALCON_CPUCTL ===
Line 1,625: Line 1,666:
  
 
=== FALCON_BOOTVEC ===
 
=== FALCON_BOOTVEC ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_BOOTVEC_VEC
 +
|}
 +
 
Takes the Falcon's boot vector address.
 
Takes the Falcon's boot vector address.
  
Line 1,669: Line 1,718:
  
 
=== FALCON_DMATRFBASE ===
 
=== FALCON_DMATRFBASE ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_DMATRFBASE_BASE
 +
|}
 +
 
Base address of the external memory buffer, shifted right by 8.
 
Base address of the external memory buffer, shifted right by 8.
  
Line 1,674: Line 1,731:
  
 
=== FALCON_DMATRFMOFFS ===
 
=== FALCON_DMATRFMOFFS ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-15
 +
| FALCON_DMATRFMOFFS_OFFS
 +
|}
 +
 
For transfers to DMEM: the destination address.
 
For transfers to DMEM: the destination address.
 
For transfers to IMEM: the destination virtual IMEM page.
 
For transfers to IMEM: the destination virtual IMEM page.
Line 1,707: Line 1,772:
  
 
=== FALCON_DMATRFFBOFFS ===
 
=== FALCON_DMATRFFBOFFS ===
−
For transfers to IMEM: the destination physical IMEM page.
+
{| class="wikitable" border="1"
−
 
+
!  Bits
−
=== FALCON_DMAPOLL_FB ===
+
!  Description
 +
|-
 +
| 0-15
 +
| FALCON_DMATRFFBOFFS_OFFS
 +
|}
 +
 
 +
For transfers to IMEM: the destination physical IMEM page.
 +
 
 +
=== FALCON_DMAPOLL_FB ===
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
!  Bits
 
!  Bits
Line 1,820: Line 1,893:
  
 
=== FALCON_IMSTAT ===
 
=== FALCON_IMSTAT ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_IMSTAT_VAL
 +
|}
 +
 
Returns the result of the last command from [[#FALCON_IMCTL|FALCON_IMCTL]].
 
Returns the result of the last command from [[#FALCON_IMCTL|FALCON_IMCTL]].
  
Line 1,840: Line 1,921:
  
 
=== FALCON_TRACEPC ===
 
=== FALCON_TRACEPC ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-23
 +
| FALCON_TRACEPC_PC
 +
|}
 +
 
Returns the PC of the last call or branch executed.
 
Returns the PC of the last call or branch executed.
  
Line 1,875: Line 1,964:
  
 
=== FALCON_IMEMD0 ===
 
=== FALCON_IMEMD0 ===
−
Returns or takes the value for an IMEM read/write operation.
 
−
 
−
=== FALCON_IMEMT0 ===
 
−
Returns or takes the virtual page index for an IMEM read/write operation.
 
−
 
−
=== FALCON_DMEMC0 ===
 
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
!  Bits
 
!  Bits
 
!  Description
 
!  Description
 
|-
 
|-
−
| 2-7
+
| 0-31
 +
| FALCON_IMEMD_DATA
 +
|}
 +
 
 +
Returns or takes the value for an IMEM read/write operation.
 +
 
 +
=== FALCON_IMEMT0 ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-15
 +
| FALCON_IMEMT_TAG
 +
|}
 +
 
 +
Returns or takes the virtual page index for an IMEM read/write operation.
 +
 
 +
=== FALCON_DMEMC0 ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 2-7
 
| FALCON_DMEMC_OFFS
 
| FALCON_DMEMC_OFFS
 
|-
 
|-
Line 1,901: Line 2,006:
  
 
=== FALCON_DMEMD0 ===
 
=== FALCON_DMEMD0 ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_DMEMD_DATA
 +
|}
 +
 
Returns or takes the value for a DMEM read/write operation.
 
Returns or takes the value for a DMEM read/write operation.
  
Line 1,997: Line 2,110:
  
 
=== FALCON_ICD_ADDR ===
 
=== FALCON_ICD_ADDR ===
−
Takes the target address for the Falcon's in-chip debugger.
+
{| class="wikitable" border="1"
−
 
+
!  Bits
−
=== FALCON_ICD_WDATA ===
+
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_ICD_ADDR_ADDR
 +
|}
 +
 
 +
Takes the target address for the Falcon's in-chip debugger.
 +
 
 +
=== FALCON_ICD_WDATA ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_ICD_WDATA_DATA
 +
|}
 +
 
 
Takes the data for writing using the Falcon's in-chip debugger.
 
Takes the data for writing using the Falcon's in-chip debugger.
  
 
=== FALCON_ICD_RDATA ===
 
=== FALCON_ICD_RDATA ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| FALCON_ICD_RDATA_DATA
 +
|}
 +
 
Returns the data read using the Falcon's in-chip debugger.
 
Returns the data read using the Falcon's in-chip debugger.
  
Line 3,125: Line 3,262:
  
 
=== TSEC_TFBIF_ACTMON_ACTIVE_MASK ===
 
=== TSEC_TFBIF_ACTMON_ACTIVE_MASK ===
−
Takes the memory access mask for the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.
 
−
 
−
=== TSEC_TFBIF_ACTMON_ACTIVE_BORPS ===
 
−
Takes the billions of records per second count for the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.
 
−
 
−
=== TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT ===
 
−
Controls the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.
 
−
 
−
=== TSEC_CG ===
 
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
!  Bits
 
!  Bits
 
!  Description
 
!  Description
 
|-
 
|-
−
| 0-5
+
| 0
−
| TSEC_CG_IDLE_CG_DLY_CNT
+
| TSEC_TFBIF_ACTMON_ACTIVE_MASK_STARVED_MC
 +
|-
 +
| 1
 +
| TSEC_TFBIF_ACTMON_ACTIVE_MASK_STALLED_MC
 +
|-
 +
| 2
 +
| TSEC_TFBIF_ACTMON_ACTIVE_MASK_DELAYED_MC
 +
|-
 +
| 3
 +
| TSEC_TFBIF_ACTMON_ACTIVE_MASK_ACTIVE
 +
|}
 +
 
 +
Takes the memory access mask for the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.
 +
 
 +
=== TSEC_TFBIF_ACTMON_ACTIVE_BORPS ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STARVED_MC_POLARITY
 +
|-
 +
| 1
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STARVED_MC_OPERATION
 +
|-
 +
| 2
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STALLED_MC_POLARITY
 +
|-
 +
| 3
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STALLED_MC_OPERATION
 +
|-
 +
| 4
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_DELAYED_MC_POLARITY
 +
|-
 +
| 5
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_DELAYED_MC_OPERATION
 +
|-
 +
| 6
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_ACTIVE_POLARITY
 +
|-
 +
| 7
 +
| TSEC_TFBIF_ACTMON_ACTIVE_BORPS_ACTIVE_OPERATION
 +
|}
 +
 
 +
Takes the billions of records per second count for the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.
 +
 
 +
=== TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT_VAL
 +
|}
 +
 
 +
Controls the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.
 +
 
 +
=== TSEC_CG ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-5
 +
| TSEC_CG_IDLE_CG_DLY_CNT
 +
|-
 +
| 6
 +
| TSEC_CG_IDLE_CG_EN
 +
|-
 +
| 16-18
 +
| TSEC_CG_WAKEUP_DLY_CNT
 +
|-
 +
| 19
 +
| TSEC_CG_WAKEUP_DLY_EN
 +
|}
 +
 
 +
=== TSEC_BAR0_CTL ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0
 +
| TSEC_BAR0_CTL_READ
 +
|-
 +
| 1
 +
| TSEC_BAR0_CTL_WRITE
 +
|-
 +
| 4-7
 +
| TSEC_BAR0_CTL_BYTE_MASK
 +
|-
 +
| 12-13
 +
| TSEC_BAR0_CTL_STATUS
 +
0: Idle
 +
1: Busy
 +
2: Error
 +
3: Disabled
 +
|-
 +
| 31
 +
| TSEC_BAR0_CTL_INIT
 +
|}
 +
 
 +
A BAR0 DMA read/write operation requires bits TSEC_BAR0_CTL_INIT and TSEC_BAR0_CTL_READ/TSEC_BAR0_CTL_WRITE to be set in TSEC_BAR0_CTL.
 +
 
 +
During the transfer, TSEC_BAR0_CTL_STATUS is set to "Busy".
 +
 
 +
Accessing an invalid address sets TSEC_BAR0_CTL_STATUS to "Error".
 +
 
 +
=== TSEC_BAR0_ADDR ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 +
|-
 +
| 0-31
 +
| TSEC_BAR0_ADDR_VAL
 +
|}
 +
 
 +
Takes the address for DMA transfers between TSEC and HOST1X (master and clients).
 +
 
 +
=== TSEC_BAR0_DATA ===
 +
{| class="wikitable" border="1"
 +
!  Bits
 +
!  Description
 
|-
 
|-
−
| 6
+
| 0-31
−
| TSEC_CG_IDLE_CG_EN
+
| TSEC_BAR0_DATA_VAL
−
|-
 
−
| 16-18
 
−
| TSEC_CG_WAKEUP_DLY_CNT
 
−
|-
 
−
| 19
 
−
| TSEC_CG_WAKEUP_DLY_EN
 
 
|}
 
|}
  
−
=== TSEC_BAR0_CTL ===
+
Takes the data for DMA transfers between TSEC and HOST1X (master and clients).
 +
 
 +
=== TSEC_BAR0_TIMEOUT ===
 
{| class="wikitable" border="1"
 
{| class="wikitable" border="1"
 
!  Bits
 
!  Bits
 
!  Description
 
!  Description
 
|-
 
|-
−
| 0
+
| 0-31
−
| TSEC_BAR0_CTL_READ
+
| TSEC_BAR0_TIMEOUT_VAL
−
|-
 
−
| 1
 
−
| TSEC_BAR0_CTL_WRITE
 
−
|-
 
−
| 4-7
 
−
| TSEC_BAR0_CTL_BYTE_MASK
 
−
|-
 
−
| 12-13
 
−
| TSEC_BAR0_CTL_STATUS
 
−
0: Idle
 
−
1: Busy
 
−
2: Error
 
−
3: Disabled
 
−
|-
 
−
| 31
 
−
| TSEC_BAR0_CTL_INIT
 
 
|}
 
|}
  
−
A BAR0 DMA read/write operation requires bits TSEC_BAR0_CTL_INIT and TSEC_BAR0_CTL_READ/TSEC_BAR0_CTL_WRITE to be set in TSEC_BAR0_CTL.
 
−
 
−
During the transfer, TSEC_BAR0_CTL_STATUS is set to "Busy".
 
−
 
−
Accessing an invalid address sets TSEC_BAR0_CTL_STATUS to "Error".
 
−
 
−
=== TSEC_BAR0_ADDR ===
 
−
Takes the address for DMA transfers between TSEC and HOST1X (master and clients).
 
−
 
−
=== TSEC_BAR0_DATA ===
 
−
Takes the data for DMA transfers between TSEC and HOST1X (master and clients).
 
−
 
−
=== TSEC_BAR0_TIMEOUT ===
 
 
Takes the timeout value for DMA transfers between TSEC and HOST1X (master and clients).
 
Takes the timeout value for DMA transfers between TSEC and HOST1X (master and clients).
  

Revision as of 20:09, 20 November 2019

TSEC (Tegra Security Co-processor) is a dedicated unit powered by a NVIDIA Falcon microprocessor with crypto extensions.

Driver

A host driver for communicating with the TSEC is mapped to physical address 0x54500000 with a total size of 0x40000 bytes and exposes several registers.

Registers

The TSEC's MMIO space is divided as follows:

  • 0x54500000 to 0x54501000: THI (Tegra Host Interface)
  • 0x54501000 to 0x54501400: FALCON (Falcon microcontroller)
  • 0x54501400 to 0x54501500: SCP (Secure Co-processor)
  • 0x54501500 to 0x54501600: RND (Random Number Generator)
  • 0x54501600 to 0x54501680: TFBIF (Tegra Framebuffer Interface)
  • 0x54501680 to 0x54501700: CG (Clock Gate)
  • 0x54501700 to 0x54501800: BAR0 (HOST1X device DMA)
  • 0x54501800 to 0x54501900: TEGRA (Miscellaneous interfaces)
Name Address Width
TSEC_THI_INCR_SYNCPT 0x54500000 0x04
TSEC_THI_INCR_SYNCPT_CTRL 0x54500004 0x04
TSEC_THI_INCR_SYNCPT_ERR 0x54500008 0x04
TSEC_THI_CTXSW_INCR_SYNCPT 0x5450000C 0x04
TSEC_THI_CTXSW 0x54500020 0x04
TSEC_THI_CTXSW_NEXT 0x54500024 0x04
TSEC_THI_CONT_SYNCPT_EOF 0x54500028 0x04
TSEC_THI_CONT_SYNCPT_L1 0x5450002C 0x04
TSEC_THI_STREAMID0 0x54500030 0x04
TSEC_THI_STREAMID1 0x54500034 0x04
TSEC_THI_THI_SEC 0x54500038 0x04
TSEC_THI_METHOD0 0x54500040 0x04
TSEC_THI_METHOD1 0x54500044 0x04
TSEC_THI_CONTEXT_SWITCH 0x54500060 0x04
TSEC_THI_INT_STATUS 0x54500078 0x04
TSEC_THI_INT_MASK 0x5450007C 0x04
TSEC_THI_CONFIG0 0x54500080 0x04
TSEC_THI_DBG_MISC 0x54500084 0x04
TSEC_THI_SLCG_OVERRIDE_HIGH_A 0x54500088 0x04
TSEC_THI_SLCG_OVERRIDE_LOW_A 0x5450008C 0x04
TSEC_THI_CLK_OVERRIDE 0x54500E00 0x04
FALCON_IRQSSET 0x54501000 0x04
FALCON_IRQSCLR 0x54501004 0x04
FALCON_IRQSTAT 0x54501008 0x04
FALCON_IRQMODE 0x5450100C 0x04
FALCON_IRQMSET 0x54501010 0x04
FALCON_IRQMCLR 0x54501014 0x04
FALCON_IRQMASK 0x54501018 0x04
FALCON_IRQDEST 0x5450101C 0x04
FALCON_GPTMRINT 0x54501020 0x04
FALCON_GPTMRVAL 0x54501024 0x04
FALCON_GPTMRCTL 0x54501028 0x04
FALCON_PTIMER0 0x5450102C 0x04
FALCON_PTIMER1 0x54501030 0x04
FALCON_WDTMRVAL 0x54501034 0x04
FALCON_WDTMRCTL 0x54501038 0x04
FALCON_IRQDEST2 0x5450103C 0x04
FALCON_MAILBOX0 0x54501040 0x04
FALCON_MAILBOX1 0x54501044 0x04
FALCON_ITFEN 0x54501048 0x04
FALCON_IDLESTATE 0x5450104C 0x04
FALCON_CURCTX 0x54501050 0x04
FALCON_NXTCTX 0x54501054 0x04
FALCON_CTXACK 0x54501058 0x04
FALCON_FHSTATE 0x5450105C 0x04
FALCON_PRIVSTATE 0x54501060 0x04
FALCON_MTHDDATA 0x54501064 0x04
FALCON_MTHDID 0x54501068 0x04
FALCON_MTHDWDAT 0x5450106C 0x04
FALCON_MTHDCOUNT 0x54501070 0x04
FALCON_MTHDPOP 0x54501074 0x04
FALCON_MTHDRAMSZ 0x54501078 0x04
FALCON_SFTRESET 0x5450107C 0x04
FALCON_OS 0x54501080 0x04
FALCON_RM 0x54501084 0x04
FALCON_SOFT_PM 0x54501088 0x04
FALCON_SOFT_MODE 0x5450108C 0x04
FALCON_DEBUG1 0x54501090 0x04
FALCON_DEBUGINFO 0x54501094 0x04
FALCON_IBRKPT1 0x54501098 0x04
FALCON_IBRKPT2 0x5450109C 0x04
FALCON_CGCTL 0x545010A0 0x04
FALCON_ENGCTL 0x545010A4 0x04
FALCON_PMM 0x545010A8 0x04
FALCON_ADDR 0x545010AC 0x04
FALCON_IBRKPT3 0x545010B0 0x04
FALCON_IBRKPT4 0x545010B4 0x04
FALCON_IBRKPT5 0x545010B8 0x04
FALCON_EXCI 0x545010D0 0x04
FALCON_SVEC_SPR 0x545010D4 0x04
FALCON_RSTAT0 0x545010D8 0x04
FALCON_RSTAT3 0x545010DC 0x04
FALCON_UNK_E0 0x545010E0 0x04
FALCON_CPUCTL 0x54501100 0x04
FALCON_BOOTVEC 0x54501104 0x04
FALCON_HWCFG 0x54501108 0x04
FALCON_DMACTL 0x5450110C 0x04
FALCON_DMATRFBASE 0x54501110 0x04
FALCON_DMATRFMOFFS 0x54501114 0x04
FALCON_DMATRFCMD 0x54501118 0x04
FALCON_DMATRFFBOFFS 0x5450111C 0x04
FALCON_DMAPOLL_FB 0x54501120 0x04
FALCON_DMAPOLL_CP 0x54501124 0x04
FALCON_DBG_STATE 0x54501128 0x04
FALCON_HWCFG1 0x5450112C 0x04
FALCON_CPUCTL_ALIAS 0x54501130 0x04
FALCON_STACKCFG 0x54501138 0x04
FALCON_IMCTL 0x54501140 0x04
FALCON_IMSTAT 0x54501144 0x04
FALCON_TRACEIDX 0x54501148 0x04
FALCON_TRACEPC 0x5450114C 0x04
FALCON_IMFILLRNG0 0x54501150 0x04
FALCON_IMFILLRNG1 0x54501154 0x04
FALCON_IMFILLCTL 0x54501158 0x04
FALCON_IMCTL_DEBUG 0x5450115C 0x04
FALCON_CMEMBASE 0x54501160 0x04
FALCON_DMEMAPERT 0x54501164 0x04
FALCON_EXTERRADDR 0x54501168 0x04
FALCON_EXTERRSTAT 0x5450116C 0x04
FALCON_CG2 0x5450117C 0x04
FALCON_IMEMC0 0x54501180 0x04
FALCON_IMEMD0 0x54501184 0x04
FALCON_IMEMT0 0x54501188 0x04
FALCON_IMEMC1 0x54501190 0x04
FALCON_IMEMD1 0x54501194 0x04
FALCON_IMEMT1 0x54501198 0x04
FALCON_IMEMC2 0x545011A0 0x04
FALCON_IMEMD2 0x545011A4 0x04
FALCON_IMEMT2 0x545011A8 0x04
FALCON_IMEMC3 0x545011B0 0x04
FALCON_IMEMD3 0x545011B4 0x04
FALCON_IMEMT3 0x545011B8 0x04
FALCON_DMEMC0 0x545011C0 0x04
FALCON_DMEMD0 0x545011C4 0x04
FALCON_DMEMC1 0x545011C8 0x04
FALCON_DMEMD1 0x545011CC 0x04
FALCON_DMEMC2 0x545011D0 0x04
FALCON_DMEMD2 0x545011D4 0x04
FALCON_DMEMC3 0x545011D8 0x04
FALCON_DMEMD3 0x545011DC 0x04
FALCON_DMEMC4 0x545011E0 0x04
FALCON_DMEMD4 0x545011E4 0x04
FALCON_DMEMC5 0x545011E8 0x04
FALCON_DMEMD5 0x545011EC 0x04
FALCON_DMEMC6 0x545011F0 0x04
FALCON_DMEMD6 0x545011F4 0x04
FALCON_DMEMC7 0x545011F8 0x04
FALCON_DMEMD7 0x545011FC 0x04
FALCON_ICD_CMD 0x54501200 0x04
FALCON_ICD_ADDR 0x54501204 0x04
FALCON_ICD_WDATA 0x54501208 0x04
FALCON_ICD_RDATA 0x5450120C 0x04
FALCON_SCTL 0x54501240 0x04
FALCON_SSTAT 0x54501244 0x04
FALCON_UNK_250 0x54501250 0x04
FALCON_UNK_260 0x54501260 0x04
FALCON_SPROT_IMEM 0x54501280 0x04
FALCON_SPROT_DMEM 0x54501284 0x04
FALCON_SPROT_CPUCTL 0x54501288 0x04
FALCON_SPROT_MISC 0x5450128C 0x04
FALCON_SPROT_IRQ 0x54501290 0x04
FALCON_SPROT_MTHD 0x54501294 0x04
FALCON_SPROT_SCTL 0x54501298 0x04
FALCON_SPROT_WDTMR 0x5450129C 0x04
FALCON_DMAINFO_FINISHED_FBRD_LOW 0x545012C0 0x04
FALCON_DMAINFO_FINISHED_FBRD_HIGH 0x545012C4 0x04
FALCON_DMAINFO_FINISHED_FBWR_LOW 0x545012C8 0x04
FALCON_DMAINFO_FINISHED_FBWR_HIGH 0x545012CC 0x04
FALCON_DMAINFO_CURRENT_FBRD_LOW 0x545012D0 0x04
FALCON_DMAINFO_CURRENT_FBRD_HIGH 0x545012D4 0x04
FALCON_DMAINFO_CURRENT_FBWR_LOW 0x545012D8 0x04
FALCON_DMAINFO_CURRENT_FBWR_HIGH 0x545012DC 0x04
FALCON_DMAINFO_CTL 0x545012E0 0x04
TSEC_SCP_CTL0 0x54501400 0x04
TSEC_SCP_CTL1 0x54501404 0x04
TSEC_SCP_CTL_STAT 0x54501408 0x04
TSEC_SCP_CTL_LOCK 0x5450140C 0x04
TSEC_SCP_CFG 0x54501410 0x04
TSEC_SCP_CTL_SCP 0x54501414 0x04
TSEC_SCP_CTL_PKEY 0x54501418 0x04
TSEC_SCP_CTL_DBG 0x5450141C 0x04
TSEC_SCP_DBG0 0x54501420 0x04
TSEC_SCP_DBG1 0x54501424 0x04
TSEC_SCP_DBG2 0x54501428 0x04
TSEC_SCP_CMD 0x54501430 0x04
TSEC_SCP_STAT0 0x54501450 0x04
TSEC_SCP_STAT1 0x54501454 0x04
TSEC_SCP_STAT2 0x54501458 0x04
TSEC_SCP_RND_STAT0 0x54501470 0x04
TSEC_SCP_RND_STAT1 0x54501474 0x04
TSEC_SCP_IRQSTAT 0x54501480 0x04
TSEC_SCP_IRQMASK 0x54501484 0x04
TSEC_SCP_ACL_ERR 0x54501490 0x04
TSEC_SCP_SEC_ERR 0x54501494 0x04
TSEC_SCP_CMD_ERR 0x54501498 0x04
TSEC_RND_CTL0 0x54501500 0x04
TSEC_RND_CTL1 0x54501504 0x04
TSEC_RND_CTL2 0x54501508 0x04
TSEC_RND_CTL3 0x5450150C 0x04
TSEC_RND_CTL4 0x54501510 0x04
TSEC_RND_CTL5 0x54501514 0x04
TSEC_RND_CTL6 0x54501518 0x04
TSEC_RND_CTL7 0x5450151C 0x04
TSEC_RND_CTL8 0x54501520 0x04
TSEC_RND_CTL9 0x54501524 0x04
TSEC_RND_CTL10 0x54501528 0x04
TSEC_RND_CTL11 0x5450152C 0x04
TSEC_TFBIF_CTL 0x54501600 0x04
TSEC_TFBIF_MCCIF_FIFOCTRL 0x54501604 0x04
TSEC_TFBIF_THROTTLE 0x54501608 0x04
TSEC_TFBIF_DBG_STAT0 0x5450160C 0x04
TSEC_TFBIF_DBG_STAT1 0x54501610 0x04
TSEC_TFBIF_DBG_RDCOUNT_LO 0x54501614 0x04
TSEC_TFBIF_DBG_RDCOUNT_HI 0x54501618 0x04
TSEC_TFBIF_DBG_WRCOUNT_LO 0x5450161C 0x04
TSEC_TFBIF_DBG_WRCOUNT_HI 0x54501620 0x04
TSEC_TFBIF_DBG_R32COUNT 0x54501624 0x04
TSEC_TFBIF_DBG_R64COUNT 0x54501628 0x04
TSEC_TFBIF_DBG_R128COUNT 0x5450162C 0x04
TSEC_TFBIF_UNK_30 0x54501630 0x04
TSEC_TFBIF_MCCIF_FIFOCTRL1 0x54501634 0x04
TSEC_TFBIF_WRR_RDP 0x54501638 0x04
TSEC_TFBIF_SPROT_EMEM 0x54501640 0x04
TSEC_TFBIF_TRANSCFG 0x54501644 0x04
TSEC_TFBIF_REGIONCFG 0x54501648 0x04
TSEC_TFBIF_ACTMON_ACTIVE_MASK 0x5450164C 0x04
TSEC_TFBIF_ACTMON_ACTIVE_BORPS 0x54501650 0x04
TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT 0x54501654 0x04
TSEC_TFBIF_ACTMON_MCB_MASK 0x54501660 0x04
TSEC_TFBIF_ACTMON_MCB_BORPS 0x54501664 0x04
TSEC_TFBIF_ACTMON_MCB_WEIGHT 0x54501668 0x04
TSEC_TFBIF_THI_TRANSPROP 0x54501670 0x04
TSEC_CG 0x545016D0 0x04
TSEC_BAR0_CTL 0x54501700 0x04
TSEC_BAR0_ADDR 0x54501704 0x04
TSEC_BAR0_DATA 0x54501708 0x04
TSEC_BAR0_TIMEOUT 0x5450170C 0x04
TSEC_TEGRA_FALCON_IP_VER 0x54501800 0x04
TSEC_TEGRA_UNK_04 0x54501804 0x04
TSEC_TEGRA_UNK_08 0x54501808 0x04
TSEC_TEGRA_UNK_0C 0x5450180C 0x04
TSEC_TEGRA_UNK_10 0x54501810 0x04
TSEC_TEGRA_UNK_14 0x54501814 0x04
TSEC_TEGRA_UNK_18 0x54501818 0x04
TSEC_TEGRA_UNK_1C 0x5450181C 0x04
TSEC_TEGRA_UNK_20 0x54501820 0x04
TSEC_TEGRA_UNK_24 0x54501824 0x04
TSEC_TEGRA_UNK_28 0x54501828 0x04
TSEC_TEGRA_UNK_2C 0x5450182C 0x04
TSEC_TEGRA_UNK_30 0x54501830 0x04
TSEC_TEGRA_UNK_34 0x54501834 0x04
TSEC_TEGRA_CTL 0x54501838 0x04

TSEC_THI_METHOD0

Bits Description
0-11 TSEC_THI_METHOD0_OFFSET

Used to encode and send a method's ID over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.

The following methods are available:

ID Method
0x100 NOP
0x140 PM_TRIGGER
0x200 SET_APPLICATION_ID
0x204 SET_WATCHDOG_TIMER
0x240 SEMAPHORE_A
0x244 SEMAPHORE_B
0x248 SEMAPHORE_C
0x24C
0x250
0x300 EXECUTE
0x304 SEMAPHORE_D
0x500 HDCP_INIT
0x504 HDCP_CREATE_SESSION
0x508 HDCP_VERIFY_CERT_RX
0x50C HDCP_GENERATE_EKM
0x510 HDCP_REVOCATION_CHECK
0x514 HDCP_VERIFY_HPRIME
0x518 HDCP_ENCRYPT_PAIRING_INFO
0x51C HDCP_DECRYPT_PAIRING_INFO
0x520 HDCP_UPDATE_SESSION
0x524 HDCP_GENERATE_LC_INIT
0x528 HDCP_VERIFY_LPRIME
0x52C HDCP_GENERATE_SKE_INIT
0x530 HDCP_VERIFY_VPRIME
0x534 HDCP_ENCRYPTION_RUN_CTRL
0x538 HDCP_SESSION_CTRL
0x53C HDCP_COMPUTE_SPRIME
0x540 HDCP_GET_CERT_RX
0x544 HDCP_EXCHANGE_INFO
0x548 HDCP_DECRYPT_KM
0x54C HDCP_GET_HPRIME
0x550 HDCP_GENERATE_EKH_KM
0x554 HDCP_VERIFY_RTT_CHALLENGE
0x558 HDCP_GET_LPRIME
0x55C HDCP_DECRYPT_KS
0x560 HDCP_DECRYPT
0x564 HDCP_GET_RRX
0x568 HDCP_DECRYPT_REENCRYPT
0x56C
0x570
0x574
0x578
0x57C
0x700 HDCP_VALIDATE_SRM
0x704 HDCP_VALIDATE_STREAM
0x708 HDCP_TEST_SECURE_STATUS
0x70C HDCP_SET_DCP_KPUB
0x710 HDCP_SET_RX_KPUB
0x714 HDCP_SET_CERT_RX
0x718 HDCP_SET_SCRATCH_BUFFER
0x71C HDCP_SET_SRM
0x720 HDCP_SET_RECEIVER_ID_LIST
0x724 HDCP_SET_SPRIME
0x728 HDCP_SET_ENC_INPUT_BUFFER
0x72C HDCP_SET_ENC_OUTPUT_BUFFER
0x730 HDCP_GET_RTT_CHALLENGE
0x734 HDCP_STREAM_MANAGE
0x738 HDCP_READ_CAPS
0x73C HDCP_ENCRYPT
0x740 [6.0.0+] HDCP_GET_CURRENT_NONCE
0x1114 PM_TRIGGER_END

TSEC_THI_METHOD1

Bits Description
0-31 TSEC_THI_METHOD1_DATA

Used to encode and send a method's data over HOST1X to TSEC. This register mirrors the functionality of HOST1X's channel opcode submission.

TSEC_THI_INT_STATUS

Bits Description
0 TSEC_THI_INT_STATUS_FALCON_INT

TSEC_THI_INT_MASK

Bits Description
0 TSEC_THI_INT_MASK_FALCON_INT

FALCON_IRQSSET

Bits Description
0 FALCON_IRQSSET_GPTMR
1 FALCON_IRQSSET_WDTMR
2 FALCON_IRQSSET_MTHD
3 FALCON_IRQSSET_CTXSW
4 FALCON_IRQSSET_HALT
5 FALCON_IRQSSET_EXTERR
6 FALCON_IRQSSET_SWGEN0
7 FALCON_IRQSSET_SWGEN1
8-15 FALCON_IRQSSET_EXT
16 FALCON_IRQSSET_DMA

Used for setting Falcon's IRQs.

FALCON_IRQSCLR

Bits Description
0 FALCON_IRQSCLR_GPTMR
1 FALCON_IRQSCLR_WDTMR
2 FALCON_IRQSCLR_MTHD
3 FALCON_IRQSCLR_CTXSW
4 FALCON_IRQSCLR_HALT
5 FALCON_IRQSCLR_EXTERR
6 FALCON_IRQSCLR_SWGEN0
7 FALCON_IRQSCLR_SWGEN1
8-15 FALCON_IRQSCLR_EXT
16 FALCON_IRQSCLR_DMA

Used for clearing Falcon's IRQs.

FALCON_IRQSTAT

Bits Description
0 FALCON_IRQSTAT_GPTMR
1 FALCON_IRQSTAT_WDTMR
2 FALCON_IRQSTAT_MTHD
3 FALCON_IRQSTAT_CTXSW
4 FALCON_IRQSTAT_HALT
5 FALCON_IRQSTAT_EXTERR
6 FALCON_IRQSTAT_SWGEN0
7 FALCON_IRQSTAT_SWGEN1
8-15 FALCON_IRQSTAT_EXT
16 FALCON_IRQSTAT_DMA

Used for getting the status of Falcon's IRQs.

FALCON_IRQMODE

Bits Description
0 FALCON_IRQMODE_LVL_GPTMR
1 FALCON_IRQMODE_LVL_WDTMR
2 FALCON_IRQMODE_LVL_MTHD
3 FALCON_IRQMODE_LVL_CTXSW
4 FALCON_IRQMODE_LVL_HALT
5 FALCON_IRQMODE_LVL_EXTERR
6 FALCON_IRQMODE_LVL_SWGEN0
7 FALCON_IRQMODE_LVL_SWGEN1
8-15 FALCON_IRQMODE_LVL_EXT
16 FALCON_IRQMODE_LVL_DMA

Used for changing the mode Falcon's IRQs. A value of 1 means level triggered while a value of 0 means edge triggered.

FALCON_IRQMSET

Bits Description
0 FALCON_IRQMSET_GPTMR
1 FALCON_IRQMSET_WDTMR
2 FALCON_IRQMSET_MTHD
3 FALCON_IRQMSET_CTXSW
4 FALCON_IRQMSET_HALT
5 FALCON_IRQMSET_EXTERR
6 FALCON_IRQMSET_SWGEN0
7 FALCON_IRQMSET_SWGEN1
8-15 FALCON_IRQMSET_EXT
16 FALCON_IRQMSET_DMA

Used for setting the mask for Falcon's IRQs.

FALCON_IRQMCLR

Bits Description
0 FALCON_IRQMCLR_GPTMR
1 FALCON_IRQMCLR_WDTMR
2 FALCON_IRQMCLR_MTHD
3 FALCON_IRQMCLR_CTXSW
4 FALCON_IRQMCLR_HALT
5 FALCON_IRQMCLR_EXTERR
6 FALCON_IRQMCLR_SWGEN0
7 FALCON_IRQMCLR_SWGEN1
8-15 FALCON_IRQMCLR_EXT
16 FALCON_IRQMCLR_DMA

Used for clearing the mask for Falcon's IRQs.

FALCON_IRQMASK

Bits Description
0 FALCON_IRQMASK_GPTMR
1 FALCON_IRQMASK_WDTMR
2 FALCON_IRQMASK_MTHD
3 FALCON_IRQMASK_CTXSW
4 FALCON_IRQMASK_HALT
5 FALCON_IRQMASK_EXTERR
6 FALCON_IRQMASK_SWGEN0
7 FALCON_IRQMASK_SWGEN1
8-15 FALCON_IRQMASK_EXT
16 FALCON_IRQMASK_DMA

Used for getting the value of the mask for Falcon's IRQs.

FALCON_IRQDEST

Bits Description
0 FALCON_IRQDEST_HOST_GPTMR
1 FALCON_IRQDEST_HOST_WDTMR
2 FALCON_IRQDEST_HOST_MTHD
3 FALCON_IRQDEST_HOST_CTXSW
4 FALCON_IRQDEST_HOST_HALT
5 FALCON_IRQDEST_HOST_EXTERR
6 FALCON_IRQDEST_HOST_SWGEN0
7 FALCON_IRQDEST_HOST_SWGEN1
8-15 FALCON_IRQDEST_HOST_EXT
16 FALCON_IRQDEST_TARGET_GPTMR
17 FALCON_IRQDEST_TARGET_WDTMR
18 FALCON_IRQDEST_TARGET_MTHD
19 FALCON_IRQDEST_TARGET_CTXSW
20 FALCON_IRQDEST_TARGET_HALT
21 FALCON_IRQDEST_TARGET_EXTERR
22 FALCON_IRQDEST_TARGET_SWGEN0
23 FALCON_IRQDEST_TARGET_SWGEN1
24-31 FALCON_IRQDEST_TARGET_EXT

Used for routing Falcon's IRQs.

FALCON_IRQDEST2

Bits Description
0 FALCON_IRQDEST2_HOST_DMA
16 FALCON_IRQDEST2_TARGET_DMA

Used for routing Falcon's IRQs.

FALCON_MAILBOX0

Bits Description
0-31 FALCON_MAILBOX0_DATA

Scratch register for reading/writing data to Falcon.

FALCON_MAILBOX1

Bits Description
0-31 FALCON_MAILBOX1_DATA

Scratch register for reading/writing data to Falcon.

FALCON_ITFEN

Bits Description
0 FALCON_ITFEN_CTXEN
1 FALCON_ITFEN_MTHDEN

Used for enabling/disabling Falcon interfaces.

FALCON_IDLESTATE

Bits Description
0 FALCON_IDLESTATE_FALCON_BUSY
1-15 FALCON_IDLESTATE_EXT_BUSY

Used for detecting if Falcon is busy or not.

FALCON_DEBUG1

Bits Description
0-15 FALCON_DEBUG1_MTHD_DRAIN_TIME
16 FALCON_DEBUG1_CTXSW_MODE
17 FALCON_DEBUG1_TRACE_FORMAT

FALCON_DEBUGINFO

Bits Description
0-31 FALCON_DEBUGINFO_DATA

Used for UCODE self revocation. This register takes the base address of the GSC carveout shifted right by 8.

[6.0.0+] nvservices sets this to 0x8005FF00 >> 8 (physical DRAM address inside the GPU UCODE carveout) before starting the nvhost_tsec firmware.

FALCON_EXCI

Bits Description
0-19 FALCON_EXCI_EXPC
20-23 FALCON_EXCI_EXCAUSE 
0x00: TRAP0
0x01: TRAP1
0x02: TRAP2
0x03: TRAP3
0x08: ILL_INS (invalid opcode)
0x09: INV_INS (authentication entry)
0x0A: MISS_INS (page miss)
0x0B: DHIT_INS (page multiple hit)
0x0F: BRKPT_INS (breakpoint hit)

Contains information about raised exceptions.

FALCON_SVEC_SPR

Bits Description
18 FALCON_SVEC_SPR_SIGPASS

FALCON_RSTAT0

Mirror of the ICD status register 0.

FALCON_RSTAT3

Mirror of the ICD status register 3.

FALCON_CPUCTL

Bits Description
0 FALCON_CPUCTL_IINVAL
1 FALCON_CPUCTL_STARTCPU
2 FALCON_CPUCTL_SRESET
3 FALCON_CPUCTL_HRESET
4 FALCON_CPUCTL_HALTED
5 FALCON_CPUCTL_STOPPED
6 FALCON_CPUCTL_ALIAS_EN

Used for signaling the Falcon CPU.

FALCON_BOOTVEC

Bits Description
0-31 FALCON_BOOTVEC_VEC

Takes the Falcon's boot vector address.

FALCON_HWCFG

Bits Description
0-8 FALCON_HWCFG_IMEM_SIZE
9-17 FALCON_HWCFG_DMEM_SIZE
18-26 FALCON_HWCFG_METHODFIFO_DEPTH
27-31 FALCON_HWCFG_DMAQUEUE_DEPTH

FALCON_DMACTL

Bits Description
0 FALCON_DMACTL_REQUIRE_CTX
1 FALCON_DMACTL_DMEM_SCRUBBING
2 FALCON_DMACTL_IMEM_SCRUBBING
3-6 FALCON_DMACTL_DMAQ_NUM
7 FALCON_DMACTL_SECURE_STAT

Used for configuring the Falcon's DMA engine.

FALCON_DMATRFBASE

Bits Description
0-31 FALCON_DMATRFBASE_BASE

Base address of the external memory buffer, shifted right by 8.

The current transfer address is calculated by adding FALCON_DMATRFFBOFFS to the base.

FALCON_DMATRFMOFFS

Bits Description
0-15 FALCON_DMATRFMOFFS_OFFS

For transfers to DMEM: the destination address. For transfers to IMEM: the destination virtual IMEM page.

FALCON_DMATRFCMD

Bits Description
0 FALCON_DMATRFCMD_FULL
1 FALCON_DMATRFCMD_IDLE
2-3 FALCON_DMATRFCMD_SEC
4 FALCON_DMATRFCMD_IMEM
5 FALCON_DMATRFCMD_WRITE
8-10 FALCON_DMATRFCMD_SIZE
12-14 FALCON_DMATRFCMD_CTXDMA

Used for configuring DMA transfers.

FALCON_DMATRFFBOFFS

Bits Description
0-15 FALCON_DMATRFFBOFFS_OFFS

For transfers to IMEM: the destination physical IMEM page.

FALCON_DMAPOLL_FB

Bits Description
0 FALCON_DMAPOLL_FB_FENCE_ACTIVE
1 FALCON_DMAPOLL_FB_DMA_ACTIVE
4 FALCON_DMAPOLL_FB_CFG_R_FENCE
5 FALCON_DMAPOLL_FB_CFG_W_FENCE
16-23 FALCON_DMAPOLL_FB_WCOUNT
24-31 FALCON_DMAPOLL_FB_RCOUNT

Contains the status of a DMA transfer between the Falcon and external memory.

FALCON_DMAPOLL_CP

Bits Description
0 FALCON_DMAPOLL_CP_FENCE_ACTIVE
1 FALCON_DMAPOLL_CP_DMA_ACTIVE
4 FALCON_DMAPOLL_CP_CFG_R_FENCE
5 FALCON_DMAPOLL_CP_CFG_W_FENCE
16-23 FALCON_DMAPOLL_CP_WCOUNT
24-31 FALCON_DMAPOLL_CP_RCOUNT

Contains the status of a DMA transfer between the Falcon and the SCP.

FALCON_HWCFG1

Bits Description
0-3 FALCON_HWCFG1_CORE_REV
4-5 FALCON_HWCFG1_SECURITY_MODEL
6-7 FALCON_HWCFG1_CORE_REV_SUBVERSION
8-11 FALCON_HWCFG1_IMEM_PORTS
12-15 FALCON_HWCFG1_DMEM_PORTS
16-20 FALCON_HWCFG1_TAG_WIDTH
27 FALCON_HWCFG1_DBG_PRIV_BUS
28 FALCON_HWCFG1_CSB_SIZE_16M
29 FALCON_HWCFG1_PRIV_DIRECT
30 FALCON_HWCFG1_DMEM_APERTURES
31 FALCON_HWCFG1_IMEM_AUTOFILL

FALCON_IMCTL

Bits Description
0-23 FALCON_IMCTL_ADDR_BLK
24-26 FALCON_IMCTL_CMD 
0x00: NOP
0x01: IMINV (ITLB)
0x02: IMBLK (PTLB)
0x03: IMTAG (VTLB)
0x04: IMTAG_SETVLD

Controls the Falcon TLB.

FALCON_IMSTAT

Bits Description
0-31 FALCON_IMSTAT_VAL

Returns the result of the last command from FALCON_IMCTL.

FALCON_TRACEIDX

Bits Description
0-7 FALCON_TRACEIDX_IDX
16-23 FALCON_TRACEIDX_MAXIDX
24-31 FALCON_TRACEIDX_CNT

Controls the index for tracing with FALCON_TRACEPC.

FALCON_TRACEPC

Bits Description
0-23 FALCON_TRACEPC_PC

Returns the PC of the last call or branch executed.

FALCON_IMEMC0

Bits Description
2-7 FALCON_IMEMC_OFFS
8-15 FALCON_IMEMC_BLK
24 FALCON_IMEMC_AINCW
25 FALCON_IMEMC_AINCR
28 FALCON_IMEMC_SECURE
29 FALCON_IMEMC_SEC_ATOMIC
30 FALCON_IMEMC_SEC_WR_VIO
31 FALCON_IMEMC_SEC_LOCK

Used for configuring access to Falcon's IMEM.

FALCON_IMEMD0

Bits Description
0-31 FALCON_IMEMD_DATA

Returns or takes the value for an IMEM read/write operation.

FALCON_IMEMT0

Bits Description
0-15 FALCON_IMEMT_TAG

Returns or takes the virtual page index for an IMEM read/write operation.

FALCON_DMEMC0

Bits Description
2-7 FALCON_DMEMC_OFFS
8-15 FALCON_DMEMC_BLK
24 FALCON_DMEMC_AINCW
25 FALCON_DMEMC_AINCR

Used for configuring access to Falcon's DMEM.

FALCON_DMEMD0

Bits Description
0-31 FALCON_DMEMD_DATA

Returns or takes the value for a DMEM read/write operation.

FALCON_ICD_CMD

Bits Description
0-3 FALCON_ICD_CMD_OPC 
0x00: STOP
0x01: RUN (run from PC)
0x02: JRUN (run from address)
0x03: RUNB (run from PC)
0x04: JRUNB (run from address)
0x05: STEP (step from PC)
0x06: JSTEP (step from address)
0x07: EMASK (set exception mask)
0x08: RREG (read register)
0x09: WREG (write register)
0x0A: RDM (read data memory)
0x0B: WDM (write data memory)
0x0C: RCM (read MMIO/configuration memory)
0x0D: WCM (write MMIO/configuration memory)
0x0E: RSTAT (read status)
0x0F: SBU
6-7 FALCON_ICD_CMD_SZ 
0x00: B (byte)
0x01: HW (half word)
0x02: W (word)
8-12 FALCON_ICD_CMD_IDX 
0x00: REG0 | RSTAT0 | WB0
0x01: REG1 | RSTAT1 | WB1
0x02: REG2 | RSTAT2 | WB2
0x03: REG3 | RSTAT3 | WB3
0x04: REG4 | RSTAT4
0x05: REG5 | RSTAT5
0x06: REG6
0x07: REG7
0x08: REG8
0x09: REG9
0x0A: REG10
0x0B: REG11
0x0C: REG12
0x0D: REG13
0x0E: REG14
0x0F: REG15
0x10: IV0
0x11: IV1
0x12: UNDEFINED
0x13: EV
0x14: SP
0x15: PC
0x16: IMB
0x17: DMB
0x18: CSW
0x19: CCR
0x1A: SEC
0x1B: CTX
0x1C: EXCI
0x1D: SEC1
0x1E: IMB1
0x1F: DMB1
14 FALCON_ICD_CMD_ERROR
15 FALCON_ICD_CMD_RDVLD
16-31 FALCON_ICD_CMD_PARM 
0x0001: EMASK_TRAP0
0x0002: EMASK_TRAP1
0x0004: EMASK_TRAP2
0x0008: EMASK_TRAP3
0x0010: EMASK_EXC_UNIMP
0x0020: EMASK_EXC_IMISS
0x0040: EMASK_EXC_IMHIT
0x0080: EMASK_EXC_IBREAK
0x0100: EMASK_IV0
0x0200: EMASK_IV1
0x0400: EMASK_IV2
0x0800: EMASK_EXT0
0x1000: EMASK_EXT1
0x2000: EMASK_EXT2
0x4000: EMASK_EXT3
0x8000: EMASK_EXT4

Used for sending commands to the Falcon's in-chip debugger.

FALCON_ICD_ADDR

Bits Description
0-31 FALCON_ICD_ADDR_ADDR

Takes the target address for the Falcon's in-chip debugger.

FALCON_ICD_WDATA

Bits Description
0-31 FALCON_ICD_WDATA_DATA

Takes the data for writing using the Falcon's in-chip debugger.

FALCON_ICD_RDATA

Bits Description
0-31 FALCON_ICD_RDATA_DATA

Returns the data read using the Falcon's in-chip debugger.

When reading from an internal status register (STAT), the following applies:

Bits Description
0 RSTAT0_MEM_STALL
1 RSTAT0_DMA_STALL
2 RSTAT0_FENCE_STALL
3 RSTAT0_DIV_STALL
4 RSTAT0_DMA_STALL_DMAQ
5 RSTAT0_DMA_STALL_DMWAITING
6 RSTAT0_DMA_STALL_IMWAITING
7 RSTAT0_ANY_STALL
8 RSTAT0_SBFULL_STALL
9 RSTAT0_SBHIT_STALL
10 RSTAT0_FLOW_STALL
11 RSTAT0_SP_STALL
12 RSTAT0_BL_STALL
13 RSTAT0_IPND_STALL
14 RSTAT0_LDSTQ_STALL
16 RSTAT0_NOINSTR_STALL
20 RSTAT0_HALTSTOP_FLUSH
21 RSTAT0_AFILL_FLUSH
22 RSTAT0_EXC_FLUSH
23-25 RSTAT0_IRQ_FLUSH
28 RSTAT0_VALIDRD
29 RSTAT0_WAITING
30 RSTAT0_HALTED
31 RSTAT0_MTHD_FULL
Bits Description
0-3 RSTAT1_WB_ALLOC
4-7 RSTAT1_WB_VALID
8-9 RSTAT1_WB0_SZ
10-11 RSTAT1_WB1_SZ
12-13 RSTAT1_WB2_SZ
14-15 RSTAT1_WB3_SZ
16-19 RSTAT1_WB0_IDX
20-23 RSTAT1_WB1_IDX
24-27 RSTAT1_WB2_IDX
28-31 RSTAT1_WB3_IDX
Bits Description
0-3 RSTAT2_DMAQ_NUM
4 RSTAT2_DMA_ENABLE
5-7 RSTAT2_LDSTQ_NUM
16-19 RSTAT2_EM_BUSY
20-23 RSTAT2_EM_ACKED
24-27 RSTAT2_EM_ISWR
28-31 RSTAT2_EM_DVLD
Bits Description
0 RSTAT3_MTHD_IDLE
1 RSTAT3_CTXSW_IDLE
2 RSTAT3_DMA_IDLE
3 RSTAT3_SCP_IDLE
4 RSTAT3_LDST_IDLE
5 RSTAT3_SBWB_EMPTY
6-8 RSTAT3_CSWIE
10 RSTAT3_CSWE
12-14 RSTAT3_CTXSW_STATE 
0x00: IDLE
0x01: SM_CHECK
0x02: SM_SAVE
0x03: SM_SAVE_WAIT
0x04: SM_BLK_BIND
0x05: SM_RESET
0x06: SM_RESETWAIT
0x07: SM_ACK
15 RSTAT3_CTXSW_PEND
17 RSTAT3_DMA_FBREQ_IDLE
18 RSTAT3_DMA_ACKQ_EMPTY
19 RSTAT3_DMA_RDQ_EMPTY
20 RSTAT3_DMA_WR_BUSY
21 RSTAT3_DMA_RD_BUSY
22 RSTAT3_LDST_XT_BUSY
23 RSTAT3_LDST_XT_BLOCK
24 RSTAT3_ENG_IDLE
Bits Description
0-1 RSTAT4_ICD_STATE 
0x00: NORMAL
0x01: WAIT_ISSUE_CLEAR
0x02: WAIT_EXLDQ_CLEAR
0x03: FULL_DBG_MODE
2-3 RSTAT4_ICD_MODE 
0x00: SUPPRESSICD
0x01: ENTERICD_IBRK
0x02: ENTERICD_STEP
16 RSTAT4_ICD_EMASK_TRAP0
17 RSTAT4_ICD_EMASK_TRAP1
18 RSTAT4_ICD_EMASK_TRAP2
19 RSTAT4_ICD_EMASK_TRAP3
20 RSTAT4_ICD_EMASK_EXC_UNIMP
21 RSTAT4_ICD_EMASK_EXC_IMISS
22 RSTAT4_ICD_EMASK_EXC_IMHIT
23 RSTAT4_ICD_EMASK_EXC_IBREAK
24 RSTAT4_ICD_EMASK_IV0
25 RSTAT4_ICD_EMASK_IV1
26 RSTAT4_ICD_EMASK_IV2
27 RSTAT4_ICD_EMASK_EXT0
28 RSTAT4_ICD_EMASK_EXT1
29 RSTAT4_ICD_EMASK_EXT2
30 RSTAT4_ICD_EMASK_EXT3
31 RSTAT4_ICD_EMASK_EXT4
Bits Description
0-7 RSTAT5_LRU_STATE

FALCON_SCTL

Bits Description
0-1 FALCON_SCTL_SEC_MODE 
0: Non-secure
1: Light Secure
2: Heavy Secure
4-5 FALCON_SCTL_OLD_SEC_MODE 
0: Non-secure
1: Light Secure
2: Heavy Secure
12-13 Unknown
14 Initialize the transition to LS mode

FALCON_SSTAT

Bits Description
31 Set on memory protection violation

FALCON_SPROT_IMEM

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to Falcon IMEM.

FALCON_SPROT_DMEM

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to Falcon DMEM.

FALCON_SPROT_CPUCTL

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to the FALCON_CPUCTL register.

FALCON_SPROT_MISC

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to the following registers:

FALCON_SPROT_IRQ

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to the following registers:

FALCON_SPROT_MTHD

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to the following registers:

  • FALCON_ITFEN
  • FALCON_CURCTX
  • FALCON_NXTCTX
  • FALCON_CTXACK
  • FALCON_MTHDDATA
  • FALCON_MTHDID
  • FALCON_MTHDWDAT
  • FALCON_MTHDCOUNT
  • FALCON_MTHDPOP
  • FALCON_MTHDRAMSZ
  • FALCON_DEBUG1

FALCON_SPROT_SCTL

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to the FALCON_SCTL register.

FALCON_SPROT_WDTMR

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to the following registers:

  • FALCON_WDTMRVAL
  • FALCON_WDTMRCTL

TSEC_SCP_CTL0

Bits Description
20 Enable the TSEC_SCP_CMD register
16 Enable the SEQ controller
14 Enable the CMD interface
12 Enable the STORE interface
10 Enable the LOAD interface

TSEC_SCP_CTL1

Bits Description
0 Flush SEQ controller
11 Enable RND test mode
12 Enable the RND controller

TSEC_SCP_CFG

Bits Description
16-31 Timeout value

TSEC_SCP_CTL_STAT

Bits Description
20 TSEC_SCP_CTL_STAT_DEBUG_MODE

TSEC_SCP_CTL_LOCK

Bits Description
0 Enable lockdown mode
4 Lock SCP and RND

Controls lockdown mode and can only be cleared in Heavy Secure mode.

TSEC_SCP_CTL_PKEY

Bits Description
0 TSEC_SCP_CTL_PKEY_REQUEST_RELOAD
1 TSEC_SCP_CTL_PKEY_LOADED

TSEC_SCP_DBG0

Bits Description
0-3 Index
4 Automatic increment
5-6 Target 
0: None
1: Unknown
2: Unknown
3: SEQ
8-12 SEQ size

Used for debugging crypto controllers such as the SEQ (crypto sequence).

TSEC_SCP_DBG1

Bits Description
0-3 SEQ instruction's first operand
4-9 SEQ instruction's second operand
10-14 SEQ instruction's opcode

Used for retrieving debug data. Contains information on the last crypto sequence created when debugging the SEQ controller.

TSEC_SCP_DBG2

Bits Description
0-1 SEQ state 
0: Idle
1: Recording is active (cs0begin/cs1begin)
4-7 Number of SEQ instructions left
12-15 Active crypto key register

Used for retrieving additional debug data associated with the SEQ controller.

TSEC_SCP_CMD

Bits Description
0-3 Destination register
8-13 Source register or immediate value
20-24 Command opcode 
0x0:  nop (fuc5 opcode 0x00) 
0x1:  cmov (fuc5 opcode 0x84)
0x2:  cxsin (fuc5 opcode 0x88) or xdst (with cxset)
0x3:  cxsout (fuc5 opcode 0x8C) or xdld (with cxset) 
0x4:  crnd (fuc5 opcode 0x90)
0x5:  cs0begin (fuc5 opcode 0x94)
0x6:  cs0exec (fuc5 opcode 0x98)
0x7:  cs1begin (fuc5 opcode 0x9C)
0x8:  cs1exec (fuc5 opcode 0xA0)
0x9:  invalid (fuc5 opcode 0xA4)
0xA:  cchmod (fuc5 opcode 0xA8)
0xB:  cxor (fuc5 opcode 0xAC)
0xC:  cadd (fuc5 opcode 0xB0)
0xD:  cand (fuc5 opcode 0xB4)
0xE:  crev (fuc5 opcode 0xB8)
0xF:  cprecmac (fuc5 opcode 0xBC)
0x10: csecret (fuc5 opcode 0xC0)
0x11: ckeyreg (fuc5 opcode 0xC4)
0x12: ckexp (fuc5 opcode 0xC8)
0x13: ckrexp (fuc5 opcode 0xCC)
0x14: cenc (fuc5 opcode 0xD0)
0x15: cdec (fuc5 opcode 0xD4)
0x16: csigauth (fuc5 opcode 0xD8)
0x17: csigenc (fuc5 opcode 0xDC)
0x18: csigclr (fuc5 opcode 0xE0)
28 Set if the command is valid
31 Set if running in HS mode

Contains information on the last crypto command executed.

TSEC_SCP_STAT0

Bits Description
0 SCP is active
2 CMD interface is active
6 SEQ controller is active
14 AES controller is active
16 RND controller is active

Contains the status of the crypto controllers and interfaces.

TSEC_SCP_STAT1

Bits Description
0-1 Signature comparison result 
0: None
1: Running
2: Failed
3: Succeeded

Contains the status of the last authentication attempt.

TSEC_SCP_STAT2

Bits Description
0-4 Current SEQ opcode
5-9 Current CMD opcode
10-14 Pending CMD opcode
15-16 AES operation 
0: Encryption
1: Decryption
2: Key expansion
3: Key reverse expansion
25 STORE operation is stalled
26 LOAD operation is stalled
27 RND operation is stalled
29 AES operation is stalled

Contains the status of crypto operations.

TSEC_SCP_RND_STAT0

Bits Description
0 RND is ready

Contains the status of the RND controller.

TSEC_SCP_IRQSTAT

Bits Description
0 RND ready
8 ACL error
12 SEC error
16 CMD error
20 Single step
24 RND called
28 Timeout

Used for getting the status of crypto IRQs.

TSEC_SCP_IRQMASK

Bits Description
0 RND ready
8 ACL error
12 SEC error
16 CMD error
20 Single step
24 RND called
28 Timeout

Used for getting the value of the mask for crypto IRQs.

TSEC_SCP_ACL_ERR

Bits Description
0 Writing to a crypto register without the correct ACL
4 Reading from a crypto register without the correct ACL
8 Invalid ACL change (cchmod)
31 ACL error occurred

Contains information on errors generated by the ACL error IRQ.

TSEC_SCP_CMD_ERR

Bits Description
0 Invalid command
4 Empty crypto sequence
8 Crypto sequence is too long
12 Crypto sequence was not finished
16 Insecure signature (csigenc, csigclr or csigauth)
20 Invalid signature (csigauth in HS mode)
24 Forbidden ACL change (cchmod in NS mode)

Contains information on errors generated by the CMD error IRQ.

TSEC_RND_CTL0

Bits Description
0-31 RND clock trigger lower limit

TSEC_RND_CTL1

Bits Description
0-15 RND clock trigger upper limit
16-31 RND clock trigger mask

TSEC_TFBIF_CTL

Bits Description
0 TSEC_TFBIF_CTL_CLR_BWCOUNT
1 TSEC_TFBIF_CTL_ENABLE
2 TSEC_TFBIF_CTL_CLR_IDLEWDERR
3 TSEC_TFBIF_CTL_RESET
4 TSEC_TFBIF_CTL_IDLE
5 TSEC_TFBIF_CTL_IDLEWDERR
6 TSEC_TFBIF_CTL_SRTOUT
7 TSEC_TFBIF_CTL_CLR_SRTOUT
8-11 TSEC_TFBIF_CTL_SRTOVAL
12 TSEC_TFBIF_CTL_VPR

TSEC_TFBIF_MCCIF_FIFOCTRL

Bits Description
0 TSEC_TFBIF_MCCIF_FIFOCTRL_RCLK_OVERRIDE
1 TSEC_TFBIF_MCCIF_FIFOCTRL_WCLK_OVERRIDE
2 TSEC_TFBIF_MCCIF_FIFOCTRL_WRCL_MCLE2X
3 TSEC_TFBIF_MCCIF_FIFOCTRL_RDMC_RDFAST
4 TSEC_TFBIF_MCCIF_FIFOCTRL_WRMC_CLLE2X
5 TSEC_TFBIF_MCCIF_FIFOCTRL_RDCL_RDFAST
6 TSEC_TFBIF_MCCIF_FIFOCTRL_CCLK_OVERRIDE
7 TSEC_TFBIF_MCCIF_FIFOCTRL_RCLK_OVR_MODE
8 TSEC_TFBIF_MCCIF_FIFOCTRL_WCLK_OVR_MODE

TSEC_TFBIF_MCCIF_FIFOCTRL1

Bits Description
0-15 TSEC_TFBIF_MCCIF_FIFOCTRL1_SRD2MC_REORDER_DEPTH_LIMIT
16-31 TSEC_TFBIF_MCCIF_FIFOCTRL1_SWR2MC_REORDER_DEPTH_LIMIT

TSEC_TFBIF_THROTTLE

Bits Description
0-11 TSEC_TFBIF_THROTTLE_BUCKET_SIZE
16-27 TSEC_TFBIF_THROTTLE_LEAK_COUNT
30-31 TSEC_TFBIF_THROTTLE_LEAK_SIZE

TSEC_TFBIF_DBG_STAT0

Bits Description
0 TSEC_TFBIF_DBG_STAT0_1K_TRANSFER
1 TSEC_TFBIF_DBG_STAT0_RREQ_ISSUED
2 TSEC_TFBIF_DBG_STAT0_WREQ_ISSUED
3 TSEC_TFBIF_DBG_STAT0_TAGQ_ISSUED
4 TSEC_TFBIF_DBG_STAT0_STALL_RDATQ
5 TSEC_TFBIF_DBG_STAT0_STALL_RACKQ
6 TSEC_TFBIF_DBG_STAT0_STALL_WREQQ
7 TSEC_TFBIF_DBG_STAT0_STALL_WDATQ
8 TSEC_TFBIF_DBG_STAT0_STALL_WACKQ
9 TSEC_TFBIF_DBG_STAT0_STALL_RREQ_PENDING
10 TSEC_TFBIF_DBG_STAT0_STALL_WREQ_PENDING
11 TSEC_TFBIF_DBG_STAT0_STALL_MREQ
12 TSEC_TFBIF_DBG_STAT0_ENGINE_IDLE
13 TSEC_TFBIF_DBG_STAT0_RMCCIF_IDLE
14 TSEC_TFBIF_DBG_STAT0_WMCCIF_IDLE
15 TSEC_TFBIF_DBG_STAT0_CSB_IDLE
16 TSEC_TFBIF_DBG_STAT0_RU_IDLE
17 TSEC_TFBIF_DBG_STAT0_WU_IDLE
19 TSEC_TFBIF_DBG_STAT0_UNWEIGHT_ACTMON_ACTIVE
20 TSEC_TFBIF_DBG_STAT0_UNWEIGHT_ACTMON_MCB

TSEC_TFBIF_SPROT_EMEM

Bits Description
0-3 Read access level
4-7 Write access level

Controls accesses to external memory regions. Accessible in HS mode only.

TSEC_TFBIF_TRANSCFG

Bits Description
0 TSEC_TFBIF_TRANSCFG_ATT0_SWID
4 TSEC_TFBIF_TRANSCFG_ATT1_SWID
8 TSEC_TFBIF_TRANSCFG_ATT2_SWID
12 TSEC_TFBIF_TRANSCFG_ATT3_SWID
16 TSEC_TFBIF_TRANSCFG_ATT4_SWID
20 TSEC_TFBIF_TRANSCFG_ATT5_SWID
24 TSEC_TFBIF_TRANSCFG_ATT6_SWID
28 TSEC_TFBIF_TRANSCFG_ATT7_SWID

Configures the software ID per CTXDMA port for memory transactions. Software ID 0 (HW_SWID) forces all transactions to go through the SMMU while software ID 1 (PHY_SWID) bypasses it. Accessible in HS mode only.

[6.0.0+] The nvhost_tsec firmware sets this register to 0x10 or 0x111110 before reading memory from the GPU UCODE carveout.

TSEC_TFBIF_REGIONCFG

Bits Description
0-2 TSEC_TFBIF_REGIONCFG_T0_APERT_ID
3 TSEC_TFBIF_REGIONCFG_T0_VPR
4-6 TSEC_TFBIF_REGIONCFG_T1_APERT_ID
7 TSEC_TFBIF_REGIONCFG_T1_VPR
8-10 TSEC_TFBIF_REGIONCFG_T2_APERT_ID
11 TSEC_TFBIF_REGIONCFG_T2_VPR
12-14 TSEC_TFBIF_REGIONCFG_T3_APERT_ID
15 TSEC_TFBIF_REGIONCFG_T3_VPR
16-18 TSEC_TFBIF_REGIONCFG_T4_APERT_ID
19 TSEC_TFBIF_REGIONCFG_T4_VPR
20-22 TSEC_TFBIF_REGIONCFG_T5_APERT_ID
23 TSEC_TFBIF_REGIONCFG_T5_VPR
24-26 TSEC_TFBIF_REGIONCFG_T6_APERT_ID
27 TSEC_TFBIF_REGIONCFG_T6_VPR
28-30 TSEC_TFBIF_REGIONCFG_T7_APERT_ID
31 TSEC_TFBIF_REGIONCFG_T7_VPR

Configures the aperture ID and VPR mode per CTXDMA port for memory region accessing. Accessible in HS mode only.

[6.0.0+] The nvhost_tsec firmware sets this register to 0x20 or 0x140 before reading memory from the GPU UCODE carveout.

TSEC_TFBIF_ACTMON_ACTIVE_MASK

Bits Description
0 TSEC_TFBIF_ACTMON_ACTIVE_MASK_STARVED_MC
1 TSEC_TFBIF_ACTMON_ACTIVE_MASK_STALLED_MC
2 TSEC_TFBIF_ACTMON_ACTIVE_MASK_DELAYED_MC
3 TSEC_TFBIF_ACTMON_ACTIVE_MASK_ACTIVE

Takes the memory access mask for the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.

TSEC_TFBIF_ACTMON_ACTIVE_BORPS

Bits Description
0 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STARVED_MC_POLARITY
1 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STARVED_MC_OPERATION
2 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STALLED_MC_POLARITY
3 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_STALLED_MC_OPERATION
4 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_DELAYED_MC_POLARITY
5 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_DELAYED_MC_OPERATION
6 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_ACTIVE_POLARITY
7 TSEC_TFBIF_ACTMON_ACTIVE_BORPS_ACTIVE_OPERATION

Takes the billions of records per second count for the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.

TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT

Bits Description
0-31 TSEC_TFBIF_ACTMON_ACTIVE_WEIGHT_VAL

Controls the Activity Monitor. Disconnected on the TSEC, but available on NVDEC, NVENC and NVJPG.

TSEC_CG

Bits Description
0-5 TSEC_CG_IDLE_CG_DLY_CNT
6 TSEC_CG_IDLE_CG_EN
16-18 TSEC_CG_WAKEUP_DLY_CNT
19 TSEC_CG_WAKEUP_DLY_EN

TSEC_BAR0_CTL

Bits Description
0 TSEC_BAR0_CTL_READ
1 TSEC_BAR0_CTL_WRITE
4-7 TSEC_BAR0_CTL_BYTE_MASK
12-13 TSEC_BAR0_CTL_STATUS 
0: Idle
1: Busy
2: Error
3: Disabled
31 TSEC_BAR0_CTL_INIT

A BAR0 DMA read/write operation requires bits TSEC_BAR0_CTL_INIT and TSEC_BAR0_CTL_READ/TSEC_BAR0_CTL_WRITE to be set in TSEC_BAR0_CTL.

During the transfer, TSEC_BAR0_CTL_STATUS is set to "Busy".

Accessing an invalid address sets TSEC_BAR0_CTL_STATUS to "Error".

TSEC_BAR0_ADDR

Bits Description
0-31 TSEC_BAR0_ADDR_VAL

Takes the address for DMA transfers between TSEC and HOST1X (master and clients).

TSEC_BAR0_DATA

Bits Description
0-31 TSEC_BAR0_DATA_VAL

Takes the data for DMA transfers between TSEC and HOST1X (master and clients).

TSEC_BAR0_TIMEOUT

Bits Description
0-31 TSEC_BAR0_TIMEOUT_VAL

Takes the timeout value for DMA transfers between TSEC and HOST1X (master and clients).

TSEC_TEGRA_CTL

Bits Description
16 TSEC_TEGRA_CTL_TKFI_KFUSE
17 TSEC_TEGRA_CTL_TKFI_RESTART_FSM_KFUSE
24 TSEC_TEGRA_CTL_TMPI_FORCE_IDLE_INPUTS_I2C
25 TSEC_TEGRA_CTL_TMPI_RESTART_FSM_HOST1X
26 TSEC_TEGRA_CTL_TMPI_RESTART_FSM_APB
27 TSEC_TEGRA_CTL_TMPI_DISABLE_OUTPUT_I2C

Falcon

"Falcon" (FAst Logic CONtroller) is a proprietary general purpose CPU which can be found inside various hardware blocks that require some sort of logic processing such as TSEC (TSECA and TSECB), NVDEC, NVENC, NVJPG, VIC, GPU PMU and XUSB.

Processor Registers

A total of 32 processor registers are available in the Falcon CPU.

REG0-REG15

These are 16 32-bit GPRs (general purpose registers).

IV0

This is a SPR (special purpose register) that holds the address for interrupt vector 0.

IV1

This is a SPR (special purpose register) that holds the address for interrupt vector 1.

IV2

This is a SPR (special purpose register) that holds the address for interrupt vector 2. This register is considered "UNDEFINED" and appears to be unused.

EV

This is a SPR (special purpose register) that holds the address for the exception vector.

Alternative name (envytools): "tv".

SP

This is a SPR (special purpose register) that holds the current stack pointer.

PC

This is a SPR (special purpose register) that holds the current program counter.

IMB

This is a SPR (special purpose register) that holds the external base address for IMEM transfers.

Alternative name (envytools): "xcbase".

DMB

This is a SPR (special purpose register) that holds the external base address for DMEM transfers.

Alternative name (envytools): "xdbase".

CSW

This is a SPR (special purpose register) that holds various flag bits.

Bits Description
0-7 General purpose predicates
8 ALU carry flag
9 ALU signed overflow flag
10 ALU sign flag
11 ALU zero flag
12-15 Unused
16 Interrupt 0 enable
17 Interrupt 1 enable
18 Interrupt 2 enable (undefined)
19 Unused
20 Interrupt 0 saved enable
21 Interrupt 1 saved enable
22 Interrupt 2 saved enable (undefined)
23 Unused
24 Exception active
25 Unused
26 Unknown
27-28 Unused
29 Unknown
30-31 Unused

Alternative name (envytools): "flags".

CCR

This is a SPR (special purpose register) that holds configuration bits for the SCP DMA override functionality. The value of this register is set using the "cxset" instruction which provides a way to change the behavior of a variable amount of successively executed DMA-related instructions ("xdwait", "xdst" and "xdld").

Bits Description
0-4 Number of instructions the override is valid for (0x1F means infinite)
5 Crypto destination/source select 
0: Crypto register
1: Crypto stream
6 External memory override 
0: Disabled
1: Enabled
7 Internal memory select 
0: DMEM
1: IMEM
8-31 Unused

Alternative name (envytools): "cx".

SEC

This is a SPR (special purpose register) that holds configuration bits for the SCP authentication process.

Bits Description
0-7 Start of region to authenticate (in 0x100 pages)
8-15 Unused
16 Mark all subsequent code transfers as secret
17 Region is encrypted
18 Unknown (set in HS mode)
19 Block traps and interrupts (set in HS mode)
20-23 Unused
24-31 Size of region to authenticate (in 0x100 pages)

Alternative name (envytools): "cauth".

CTX

This is a SPR (special purpose register) that holds configuration bits for the CTXDMA ports.

Bits Description
0-2 CTXDMA port for code loads (xcld)
3 Unused
4-6 CTXDMA port for code stores (invalid)
7 Unused
8-10 CTXDMA port for data loads (xdld)
11 Unused
12-14 CTXDMA port for data stores (xdst)
15-31 Unused

Alternative name (envytools): "xtargets".

EXCI

This is a SPR (special purpose register) that holds information on raised exceptions.

Bits Description
0-19 Exception PC
20-23 Exception cause
24-31 Unused

Alternative name (envytools): "tstatus".

SEC1

Unknown. Marked as "RESERVED".

IMB1

Unknown. Marked as "RESERVED".

DMB1

Unknown. Marked as "RESERVED".

SCP

Part of the information here (which hasn't made it into envytools documentation yet) was shared by mwk from reverse engineering falcon processors over the years.

Heavy Secure Mode

Entry

From non-secure mode, upon jumping to a page marked as secret, a secret fault occurs. This causes the CPU to verify the region specified in $cauth against the MAC loaded in $c6. If the comparison is successful, the valid bit (bit0) is set on all pages in the $cauth region, and $pc is set to the base of the $cauth region. If the comparsion fails, the CPU is halted.

Exit

The CPU automatically goes back to non-secure mode when returning back into non-secret pages. When this happens, the valid bit (bit0) in the TLB flags is cleared for all secret pages.

Implementation

Under certain circumstances, it is possible to observe sigauth being briefly written to TSEC_SCP_CMD as "csigauth $c4 $c6" while the opcodes in TSEC_SCP_STAT2 are set to "cxsin" and "csigauth", respectively.

Via TSEC_SCP_DBG0 it can be observed that a 3-sized macro sequence is loaded into cs0 during a secure mode transition.

Operations

Opcode Name Operand0 Operand1 Operation Condition
0 nop N/A N/A
1 mov $cX $cY $cX = $cY; ACL(X) = ACL(Y);
2 sin $cX N/A $cX = read_stream(); ACL(X) = ???;
3 sout $cX N/A write_stream($cX); ?
4 rnd $cX N/A $cX = read_rnd(); ACL(X) = ???;
5 s0begin immX N/A record_macro_for_N_instructions(0, immX);
6 s0exec immX N/A execute_macro_N_times(0, immX);
7 s1begin immX N/A record_macro_for_N_instructions(1, immX);
8 s1exec immX N/A execute_macro_N_times(1, immX);
9 <invalid>
0xA chmod $cX immY Complicated, see ACL.
0xB xor $cX $cY $cX ^= $cY; (ACL(X) & 2) && (ACL(Y) & 2)
0xC add $cX immY $cX += immY; (ACL(X) & 2)
0xD and $cX $cY $cX &= $cY; (ACL(X) & 2) && (ACL(Y) & 2)
0xE rev $cX $cY $cX = endian_swap128($cY); ACL(X) = ACL(Y);
0xF gfmul $cX $cY $cX = gfmul($cY); ACL(X) = ACL(Y); (ACL(Y) & 2)
0x10 secret $cX immY $cX = load_secret(immY); ACL(X) = load_secret_acl(immY);
0x11 keyreg immX N/A active_key_idx = immX;
0x12 kexp $cX $cY $cX = aes_kexp($cY); ACL(X) = ACL(Y);
0x13 krexp $cX $cY $cX = aes_kexp_reverse($cY); ACL(X) = ACL(Y);
0x14 enc $cX $cY $cX = aes_enc(active_key_idx, $cY); ACL(X) = ACL(active_key_idx) & ACL(Y);
0x15 dec $cX $cY $cX = aes_dec(active_key_idx, $cY); ACL(X) = ACL(active_key_idx) & ACL(Y);
0x16 sigauth $cX $cY if (hash_verify($cX, $cY)) { has_sig = true; current_sig = $cX; } ?
0x17 sigclr N/A N/A has_sig = false;
0x18 sigenc $cX $cY if (has_sig) { $cX = aes_enc($cY, current_sig); ACL(X) = 0x13; }

sigauth

00000000: f5 3c XY d8 csigauth $cY $cX

Takes 2 crypto registers as operands and is automatically executed when jumping to a code region previously uploaded as secret. This instruction does not work in secure mode.

sigclr

00000000: f5 3c 00 e0 csigclr

This instruction takes no operands and clears the saved cauth signature used by the csigenc instruction.

chmod

00000000: f5 3c XY a8 cchmod $cY 0X or 00000000: f5 3c XY a9 cchmod $cY 1X

This instruction takes a crypto register and a 5 bit immediate value which represents the ACL mask to set.

rnd

00000000: f5 3c 0X 90 crnd $cX

This instruction initializes a crypto register with random data.

Executing this instruction only succeeds if the RND interface is enabled for the SCP, which requires taking the following steps:

Otherwise it hangs forever.

ACL

Bit Meaning
0 Secure key. Forced set if bit1 is set. Once cleared, cannot be set again.
1 Secure readable. Once cleared, cannot be set again.
2 Insecure key. Forced set if bit3 is set. Forced clear if bit0 is clear. Can be toggled back and forth.
3 Insecure readable. Forced clear if bit1 is clear. Can be toggled back and forth.
4 Insecure overwritable. Can be toggled back and forth.

Initial values

On SCP boot, the ACL is 0x1F for all $cX.

Loading into $cX using xdst instruction sets ACL($cX) to 0x13 and 0x1F, for secure and insecure mode respectively.

Spilling a $cX to DMEM using xdld instruction is allowed if (ACL($cX) & 2) or (ACL($cX) & 8), for secure and insecure mode respectively.

Loading a secret into $cX sets a per-secret ACL, unconditionally.

Secrets

Falcon's Heavy Secure Mode has access to 64 128-bit keys which are burned at factory. These keys can be loaded using the $csecret instruction which takes the target crypto register and the key index as arguments.

Secrets are specific to each Falcon unit with the exception of secret 0x3F. This secret is effectively empty (all zeros), but is configured to be overwritten with the KFUSE private key once the KFUSE clock is enabled. The KFUSE private key is console-unique.

Index ACL Notes
0x00 0x13 Used by Keygen, nvhost_tsec, nvhost_nvdec_bl020_prod, nvhost_nvdec020_prod, nvhost_nvdec020_ns and acr_ucode firmwares.
0x01 0x10 Used by nvhost_nvdec_bl020_prod firmware.
0x02 0x10
0x03 0x11 Used by nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
0x04 0x10 Used by nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
0x05 0x13 Used by nvhost_tsec, nvhost_nvdec_bl020_prod, nvhost_nvdec020_prod, nvhost_nvdec020_ns and acr_ucode firmwares.
0x06 0x11
0x07 0x11 Used by [6.0.0+] nvhost_tsec firmware.
0x08 0x10
0x09 0x13 Used by nvhost_tsec firmware.
0x0A 0x11
0x0B 0x10 Used by nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
0x0C 0x13
0x0D 0x11
0x0E 0x10
0x0F 0x13 Used by nvhost_tsec firmware.
0x10 0x11 Used by [1.0.0-5.1.0] nvhost_tsec firmware.
0x11 0x10
0x12 0x13
0x13 0x11
0x14 0x10
0x15 0x13 Used by nvhost_nvdec_bl020_prod, [5.0.0+] nvhost_nvdec020_prod, [5.0.0+] nvhost_nvdec020_ns and [6.0.0+] nvhost_tsec firmwares.
0x16 0x11
0x17 0x10
0x18 0x13
0x19 0x11
0x1A 0x10
0x1B 0x13
0x1C 0x11
0x1D 0x10
0x1E 0x13
0x1F 0x11
0x20 0x10
0x21 0x13
0x22 0x11
0x23 0x10
0x24 0x13
0x25 0x11
0x26 0x10 Used by KeygenLdr and SecureBoot
0x27 0x13
0x28 0x11
0x29 0x10
0x2A 0x13
0x2B 0x11
0x2C 0x10
0x2D 0x13
0x2E 0x11
0x2F 0x10
0x30 0x13
0x31 0x11
0x32 0x10
0x33 0x13
0x34 0x11
0x35 0x10
0x36 0x13
0x37 0x11
0x38 0x10
0x39 0x13
0x3A 0x11
0x3B 0x10
0x3C 0x13 Used by nvhost_tsec firmware.
0x3D 0x11
0x3E 0x10
0x3F 0x10 Used by Keygen, nvhost_tsec, nvhost_nvdec020_prod and nvhost_nvdec020_ns firmwares.
Retrieved from "https://switchbrew.org/w/index.php?title=TSEC&oldid=8371"