333
edits
Changes
Bluetooth Driver services (view source)
Revision as of 00:06, 8 October 2024
, 00:06, 8 October 2024no edit summary
|-
|-
| 100 || [12.0.0+] [[#IsBluetoothEnabled]]
| 100 || [12.0.0+] [[#IsBluetoothEnabled]]
|-
| 101 || [15.0.0+] ForceEnableBluetooth
|-
| 102 || [15.0.0+] EnableBluetoothStub
|-
|-
| 128 || [12.0.0+] [[#AcquireAudioEvent]]
| 128 || [12.0.0+] [[#AcquireAudioEvent]]
| 143 || [12.0.0+] [[#GetAudioControlInputState]]
| 143 || [12.0.0+] [[#GetAudioControlInputState]]
|-
|-
| 144 || [12.0.0+] [[#AcquireAudioConnectionStateChangedEvent]]
| 144 || [12.0.0-13.2.1] [[#AcquireAudioConnectionStateChangedEvent]]
|-
| 145 || [12.0.0-13.2.1] [[#GetConnectedAudioDevice]]
|-
| 146 || [13.0.0+] [[#CloseAudioControlInput]]
|-
| 147 || [13.0.0+] [[#RegisterAudioControlNotification]]
|-
| 148 || [13.0.0+] [[#SendAudioControlPassthroughCommand]]
|-
| 149 || [13.0.0+] [[#SendAudioControlSetAbsoluteVolumeCommand]]
|-
| 150 || [14.0.0+] AcquireAudioSinkVolumeLocallyChangedEvent
|-
| 151 || [14.0.0+] AcquireAudioSinkVolumeUpdateRequestCompletedEvent
|-
| 152 || [14.0.0+] GetAudioSinkVolume
|-
|-
| 145 || [12.0.0+] [[#GetConnectedAudioDevice]]
| 153 || [14.0.0+] RequestUpdateAudioSinkVolume
|-
| 154 || [14.0.0+] IsAudioSinkVolumeSupported
|-
| 155 || [15.0.0+] IsAudioSinkVolumeSupported2
|-
|-
| 256 || [5.0.0+] [[#IsManufacturingMode]]
| 256 || [5.0.0+] [[#IsManufacturingMode]]
This is used by [[BTM_services|btm]], this should not be used by other processes.
This is used by [[BTM_services|btm]], this should not be used by other processes.
This first initializes the funcptr table interfaces to the defaults (same as [[#DisableBluetooth]]). [[Settings_services#GetConfigurationId1|GetConfigurationId1]] is used, an error is thrown if the output string is empty, or if it matches "SDEV_00_01_00".
[1.0.0-11.0.1] This first initializes the funcptr table interfaces to the defaults (same as [[#DisableBluetooth]]). [[Settings_services#GetConfigurationId1|GetConfigurationId1]] is used, an error is thrown if the output string is empty, or if it matches "SDEV_00_01_00".
If the flag for [[#IsManufacturingMode]] is 0, or if this cmd was already used where that flag was 1, an interface funcptr is called. This is passed a ptr to a table of funcptrs. The ret is converted to a Result and returned if needed.
If the flag for [[#IsManufacturingMode]] is 0, or if this cmd was already used where that flag was 1, an interface funcptr is called. This is passed a ptr to a table of funcptrs. The ret is converted to a Result and returned if needed. [12.0.0+] A normal func is called instead, with no params/ret. This cmd always returns 0.
The funcptr does the following:
The above called func does the following:
* A func is called, which copies the input funcptr table into global state. These are used for writing events into [[#EventInfo]].
* [1.0.0-11.0.1] A func is called, which copies the input funcptr table into global state. These are used for writing events into [[#EventInfo]].
* A func is called 5 times with input param = [1-5]. This initializes the specified nn::bluetooth::CircularBuffer (sharedmem and internal).
* A func is called 5 times with input param = [1-5]. This initializes the specified nn::bluetooth::CircularBuffer (sharedmem and internal). [12.0.0+] This functionality is now inlined.
* A func is called for creating the "nn.bluetooth.HidMessageHandler" thread.
* A func is called for creating the "nn.bluetooth.HidMessageHandler" thread. [12.0.0+] This functionality is now inlined.
Lastly, the Event is created and returned (which global state the Event is stored in depends on whether the code-path which calls the above funcptr was used).
Lastly, the Event is ([1.0.0-11.0.1] created and) returned (which global state the Event is stored in depends on whether the code-path which calls the above funcptr was used).
== EnableBluetooth ==
== EnableBluetooth ==
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
This first calls an interface funcptr, on failure 0xCA71 is returned.
[1.0.0-11.0.1] This first calls an interface funcptr, on failure 0xCA71 is returned.
A global fixed [[#Address]] is copied to stack, this stack data is then overwritten with the output from [[Settings_services|GetBluetoothBdAddress]]. If GetBluetoothBdAddress fails, this will Abort. Then the same funcptr used by [[#SetAdapterProperty]] is called with this stack data, with [[#BluetoothPropertyType|type2]]. A converted error is returned if needed.
[1.0.0-11.0.1] A global fixed [[#Address]] is copied to stack, this stack data is then overwritten with the output from [[Settings_services|GetBluetoothBdAddress]]. If GetBluetoothBdAddress fails, this will Abort. Then the same funcptr used by [[#SetAdapterProperty]] is called with this stack data, with [[#BluetoothPropertyType|type2]]. A converted error is returned if needed.
The last two bytes of the stack [[#Address]] are inverted (byteval = ~byteval), then the above funcptr is called with this for [[#BluetoothPropertyType|type3]]. Error conversion is handled if needed, then this returns 0.
[1.0.0-11.0.1] The last two bytes of the stack [[#Address]] are inverted (byteval = ~byteval), then the above funcptr is called with this for [[#BluetoothPropertyType|type3]]. Error conversion is handled if needed, then this returns 0.
The first funcptr called above does the following:
The first funcptr called above does the following ([12.0.0+] this code is now inlined):
* Calls a GPIO func with param=0, [[SVC|sleeps]] for 10000000 nanoseconds, then calls the GPIO func again with param=1.
* Calls a GPIO func with param=0, [[SVC|sleeps]] for 10000000 nanoseconds, then calls the GPIO func again with param=1.
* [12.0.0+] Calls a func to update an interface object ptr to use the enabled-object. A vfunc for various interface objects are called, with Result 0xCA71 being returned if the ret is non-zero (failure after the first interface object will trigger an Abort).
* [12.0.0+] [[Settings_services|GetBluetoothBdAddress]] is used, on failure this will Abort. Then the same vfunc used by [[#SetAdapterProperty]] is called with the output from GetBluetoothBdAddress, with [[#AdapterPropertyType|type0]]. This will Abort on failure.
* [12.0.0+] The last two bytes of the stack [[#Address]] are inverted (byteval = ~byteval), then the above vfunc is called with this for [[#AdapterPropertyType|type3]]. This will Abort on failure, otherwise 0 is returned.
* [12.0.0+] Various code described below was moved into the above vfunc(s), etc.
* Calls a func for initializing the paired-devices table (empty).
* Calls a func for initializing the paired-devices table (empty).
* Calls a modified version of BSA_Boot, which handles BSA server initialization.
* Calls a modified version of BSA_Boot, which handles BSA server initialization.
* Uses SetValue with the param which was passed to this func.
* Uses SetValue with the param which was passed to this func.
* Does cleanup for the session object and exits the service.
* Does cleanup for the session object and exits the service.
[12.0.0+] The Enable vfunc called above for Audio does the following:
* Calls a func which does the following:
** Uses BSA to enable AV. Besides the callback, the only field in the passed struct which is set is <code>features</code>. This is ORRed to set bit0 for "remote control target", which with [13.0.0+] is only done if [[System_Settings|system-setting]] <code>bluetooth_debug!is_av_rc_tg</code> is set to true. With [14.0.0+] this is also ORRed with value 0xA (bit1/bit3) when [[System_Settings|system-setting]] <code>bluetooth_debug!is_av_rc_ct</code> is set to true (which is the case for [14.0.0+]).
** Error handling + state setup is done.
** Uses BSA to register AV twice, with the default input struct.
** Error handling + state setup is done.
* If an error occurred in a certain range, a [[#FatalReason|fatal]] is triggered and 0 is returned.
* Otherwise when successful, state init is done then 0 is returned.
== DisableBluetooth ==
== DisableBluetooth ==
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
This calls an interface funcptr. On success, the funcs for updating the interface funcptr tables are called (same as [[#InitializeBluetooth]]). Then the converted ret is returned as needed.
[1.0.0-11.0.1] This calls an interface funcptr. On success, the funcs for updating the interface funcptr tables are called (same as [[#InitializeBluetooth]]). Then the converted ret is returned as needed.
* [12.0.0+] Vfuncs for various interface objects are called, with failure triggering an Abort in some cases.
* [12.0.0+] Calls funcs to update interfaces object ptrs to use the disabled-object.
* [12.0.0+] Calls the same GPIO func as [[#EnableBluetooth]] with param=0, then 0 is returned.
* [12.0.0+] Various code described below was moved into the above vfunc(s), etc.
When bluetooth is already disabled, that funcptr just returns 0. Otherwise when it's already enabled, it does the following:
When bluetooth is already disabled, that funcptr just returns 0. Otherwise when it's already enabled, it does the following:
This starts Inquiry, the output data will be available via [[#GetEventInfo]]. Inquiry will automatically stop in 10.24 seconds ([12.0.0+] calculated from the input duration instead).
This starts Inquiry, the output data will be available via [[#GetEventInfo]]. Inquiry will automatically stop in 10.24 seconds ([12.0.0+] calculated from the input duration instead).
[12.0.0+] When service_mask is -1 the original defaults from pre-12.0.0 are used (besides duration). Otherwise, service_mask is written into the parameter struct (masked with the all-allowed-BSA-services value), and the EventInfo for discovered devices are triggered when inquiry finishes instead of immediately.
[12.0.0+] When services is -1 the original defaults from pre-12.0.0 are used (besides duration). Otherwise, services is written into the parameter struct (masked with the all-allowed-BSA-services value), and the EventInfo for discovered devices are triggered when inquiry finishes instead of immediately.
== StopInquiry ==
== StopInquiry ==
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
[12.0.0+] If [[Settings_services#BluetoothDevicesSettings|TrustedServices]] is 0, value 0x100000 is used. When bit20 is set, HID is initialized for this device, otherwise when bitmask 0xC0000 is set (<code>if((TrustedServices & 0xC0000) != 0)</code>) [[#OpenAudioConnection|audio]] is initialized for this device.
== GetPairedDeviceInfo ==
== GetPairedDeviceInfo ==
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
See [[#HidEventInfo]].
== SetTsi ==
== SetTsi ==
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
The response will be available via [[#GetHidEventInfo]].
The response will be available via [[#GetHidEventInfo]] ([12.0.0+] [[#GetEventInfo]]).
This uses a BSA extension.
This uses a BSA extension.
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
The response will be available via [[#GetHidEventInfo]].
The response will be available via [[#GetHidEventInfo]] ([12.0.0+] [[#GetEventInfo]]).
This uses a BSA extension.
This uses a BSA extension.
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
The response will be available via [[#GetHidEventInfo]].
The response will be available via [[#GetHidEventInfo]] ([12.0.0+] [[#GetEventInfo]]).
This uses a BSA extension (message 0x8CF).
This uses a BSA extension (message 0x8CF).
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
The output data will be available via [[#GetHidEventInfo]].
The output data will be available via [[#GetHidEventInfo]] ([12.0.0+] [[#GetEventInfo]]).
== GetChannelMap ==
== GetChannelMap ==
== ConnectGattServer ==
== ConnectGattServer ==
Takes an input u8, an [[#Address]], a bool, an [[Applet_Manager_services#AppletResourceUserId|AppletResourceUserId]], no output.
Takes an input u8 client_if, an [[#Address]], a bool, an [[Applet_Manager_services#AppletResourceUserId|AppletResourceUserId]], no output.
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
The input bool and AppletResourceUserId are unused.
The is_direct field passed to BSA is value 1.
== CancelConnectGattServer ==
== CancelConnectGattServer ==
== SetBleScanParameter ==
== SetBleScanParameter ==
Takes two input u16s, no output.
Takes two input u16s, no output.
The first u16 is scan_interval, the second u16 is scan_window.
This is used by [[BTM_services|btm]].
This is used by [[BTM_services|btm]].
Takes an input [[#Address]], no output.
Takes an input [[#Address]], no output.
The response will be available via [[#GetHidEventInfo]].
The response will be available via [[#GetHidEventInfo]] ([12.0.0+] [[#GetEventInfo]]).
This uses a BSA extension (message 0x8D0).
This uses a BSA extension (message 0x8D0).
sdknso uses an user-specified EventClearMode.
sdknso uses an user-specified EventClearMode.
This just gets a previously-initialized Event from global state, [[#IsManufacturingMode]] is used to select which Event to use.
== GetAudioEventInfo ==
== GetAudioEventInfo ==
Takes a type-0xA output buffer, returns an output [[#AudioEventType]].
Takes a type-0xA output buffer, returns an output [[#AudioEventType]].
This is essentially the same as the other [12.0.0+] Get*EventInfo cmds, however in this case the output type is set to value 0 when no event is available.
See [[#AudioEventInfo]].
== OpenAudioConnection ==
== OpenAudioConnection ==
Takes an input [[#Address]], no output.
Takes an input [[#Address]], no output.
This goes through state and eventually uses BSA to open an AV connection. The input struct has the RC flag set to true. sec_mask is set to require authentication and encryption.
== CloseAudioConnection ==
== CloseAudioConnection ==
Takes an input [[#Address]], no output.
Takes an input [[#Address]], no output.
This goes through state and eventually uses BSA to close an AV connection.
== OpenAudioOut ==
== OpenAudioOut ==
Takes an input [[#Address]], returns an output u32.
Takes an input [[#Address]], returns an output u32 audio_handle.
== CloseAudioOut ==
== CloseAudioOut ==
Takes an input u32, no output.
Takes an input u32 [[#OpenAudioOut|audio_handle]], no output.
== AcquireAudioOutStateChangedEvent ==
== AcquireAudioOutStateChangedEvent ==
Takes an input u32, returns an output Event handle.
Takes an input u32 [[#OpenAudioOut|audio_handle]], returns an output Event handle.
sdknso uses an user-specified EventClearMode.
sdknso uses an user-specified EventClearMode.
== StartAudioOut ==
== StartAudioOut ==
Takes an input u32, a [[#PcmParameter]], a nn::TimeSpan, returns an output nn::TimeSpan and u64.
Takes an input u32 [[#OpenAudioOut|audio_handle]], a [[#PcmParameter]], a nn::TimeSpan latency, returns an output nn::TimeSpan latency and u64.
This eventually uses BSA to start an AV stream. The codec is "Raw PCM". Synchronous feeding mode is used.
== StopAudioOut ==
== StopAudioOut ==
Takes an input u32, no output.
Takes an input u32 [[#OpenAudioOut|audio_handle]], no output.
This eventually uses BSA to stop an AV stream. The pause flag is set to false.
== GetAudioOutState ==
== GetAudioOutState ==
Takes an input u32, returns an output [[#AudioOutState]].
Takes an input u32 [[#OpenAudioOut|audio_handle]], returns an output [[#AudioOutState]].
== GetAudioOutFeedingCodec ==
== GetAudioOutFeedingCodec ==
Takes an input u32, returns an output [[#AudioCodec]].
Takes an input u32 [[#OpenAudioOut|audio_handle]], returns an output [[#AudioCodec]].
== GetAudioOutFeedingParameter ==
== GetAudioOutFeedingParameter ==
Takes an input u32, returns an output [[#PcmParameter]].
Takes an input u32 [[#OpenAudioOut|audio_handle]], returns an output [[#PcmParameter]].
== AcquireAudioOutBufferAvailableEvent ==
== AcquireAudioOutBufferAvailableEvent ==
Takes an input u32, returns an output Event handle.
Takes an input u32 [[#OpenAudioOut|audio_handle]], returns an output Event handle.
sdknso uses an user-specified EventClearMode.
sdknso uses an user-specified EventClearMode.
This gets an Event which was previously initialized.
== SendAudioData ==
== SendAudioData ==
Takes an input u32, a type-0x9 input buffer, returns an output u64.
Takes an input u32 [[#OpenAudioOut|audio_handle]], a type-0x9 input buffer, returns an output u64 transferred_size.
This eventually uses BSA to send the specified buffer to the required UIPC channel. If transferred_size doesn't match the buffer size, error 0x177A71 is returned. transferred_size is always either 0 (error occured) or the buffer size.
== AcquireAudioControlInputStateChangedEvent ==
== AcquireAudioControlInputStateChangedEvent ==
sdknso uses an user-specified EventClearMode.
sdknso uses an user-specified EventClearMode.
This gets an Event which was previously initialized.
== GetAudioControlInputState ==
== GetAudioControlInputState ==
Takes a type-0xA output buffer containing an array of [[#AudioControlButtonState]], returns an output s32.
Takes a type-0xA output buffer containing an array of [[#AudioControlButtonState]], returns an output s32 total_out.
A maximum of 0xF entries can be returned.
== AcquireAudioConnectionStateChangedEvent ==
== AcquireAudioConnectionStateChangedEvent ==
sdknso uses an user-specified EventClearMode.
sdknso uses an user-specified EventClearMode.
This gets an Event which was previously initialized.
== GetConnectedAudioDevice ==
== GetConnectedAudioDevice ==
Takes a type-0xA output buffer containing an array of [[#Address]], returns an output s32.
Takes a type-0xA output buffer containing an array of [[#Address]], returns an output s32 total_out.
A maximum of 0x8 entries can be returned.
== CloseAudioControlInput ==
Takes an input [[#Address]], no output.
This uses the BSA AV API to close the AVRCP connection.
== RegisterAudioControlNotification ==
Takes an input [[#Address]] and an u32 [[#AvrcEventType]], no output.
This uses the BSA AV API to send a vendor control command: ctype=0x3, label={counter which is incremented}, length=0x9, data=[0x31, 0x00, 0x00, 0x05, {u8 [[#AvrcEventType]]}, {rest is zeros}].
This does nothing since BSA requires [[#EnableBluetooth|features]] bit1 and bit3 to be set in order to use this.
== SendAudioControlPassthroughCommand ==
Takes an input [[#Address]], an u32 [[#AvrcOperationId]], an u32 [[#AvrcStateType]], no output.
This uses the BSA AV API to send a remote control command: label={counter which is incremented}, rc_id=[[#AvrcOperationId]], key_state=[[#AvrcStateType]].
This does nothing since BSA requires [[#EnableBluetooth|features]] bit1 to be set in order to use this.
== SendAudioControlSetAbsoluteVolumeCommand ==
Takes an input [[#Address]] and a s32, no output.
This uses the BSA AV API to send a vendor control command: ctype=0x0, label={counter which is incremented}, length=0x5, data=[0x50, 0x00, 0x00, 0x01, {input s32 value written as an u8}].
See [[#RegisterAudioControlNotification]] regarding the usage requirement.
== IsManufacturingMode ==
== IsManufacturingMode ==
This is u32 enum "nn::bluetooth::hal::AdapterPropertyType".
This is u32 enum "nn::bluetooth::hal::AdapterPropertyType".
The sysmodule will Abort if the input type is unavailable / not recognized.
= BluetoothSspVariant =
{| class="wikitable" border="1"
This is u8 enum "nn::bluetooth::BluetoothSspVariant". [12.0.0+] This is u32 enum "nn::bluetooth::hal::BluetoothSspVariant".
|-
! Value
! Description
! Data contents
|-
| 0 || Address || [[#Address]]
|-
| 1 || Name || String, max length 0xF8 excluding NUL-terminator.
|-
| 2 || || 3-bytes, Class of Device.
|-
| 3 || || Only available with [[#SetAdapterProperty]]. Same as [[#BluetoothPropertyType]] type3.
|}
= TransportType =
This is u32 enum "nn::bluetooth::TransportType".
= BluetoothSspVariant =
This is u8 enum "nn::bluetooth::BluetoothSspVariant". [12.0.0+] This is u32 enum "nn::bluetooth::hal::BluetoothSspVariant".
= EventType =
= EventType =
| 1 ([1.0.0-11.0.1] 4) || || Inquiry status changed.
| 1 ([1.0.0-11.0.1] 4) || || Inquiry status changed.
|-
|-
| 5 || || Triggered by BSA_SEC_PIN_REQ_EVT: PIN code request for pairing.
| 2 ([1.0.0-11.0.1] 5) || || Triggered by BSA_SEC_PIN_REQ_EVT: PIN code request for pairing.
|-
| 3 ([1.0.0-11.0.1] 6) || || Triggered by BSA_SEC_SP_CFM_REQ_EVT/BSA_SEC_SP_KEY_NOTIF_EVT: SSP confirm request / SSP passkey notification.
|-
| 4 ([1.0.0-11.0.1] 7) || || Connection
|-
| 5 || || [12.0.0+] [[#SetTsi|Tsi]]
|-
| 6 || || [12.0.0+] [[#EnableBurstMode|BurstMode]]
|-
|-
| 6 || || Triggered by BSA_SEC_SP_CFM_REQ_EVT/BSA_SEC_SP_KEY_NOTIF_EVT: SSP confirm request / SSP passkey notification.
| 7 || || [12.0.0+] [[#SetZeroRetransmission]]
|-
|-
| 7 || || Connection
| 8 || || [12.0.0+] [[#GetPendingConnections]]
|-
| 9 || || [12.0.0+] [[#MoveToSecondaryPiconet]]
|-
|-
| 10 ([1.0.0-11.0.1] 13) || || BluetoothCrash. Triggered by [[#EmulateBluetoothCrash]] and BSA_MGT_DISCONNECT_EVT.
| 10 ([1.0.0-11.0.1] 13) || || BluetoothCrash. Triggered by [[#EmulateBluetoothCrash]] and BSA_MGT_DISCONNECT_EVT.
= ConnectionEventType =
= ConnectionEventType =
This is the event value in [[#EventInfo]] when [[#EventType]] is type7.
This is the event value in [[#EventInfo]] when [[#EventType]] is type4 ([1.0.0-11.0.1] type7).
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0 || || Connection status.
| 0 || || [1.0.0-11.0.1] Connection status.
|-
|-
| 1 || || Triggered by BSA_SEC_SP_CFM_REQ_EVT: SSP confirm request.
| 1 || || [1.0.0-11.0.1] Triggered by BSA_SEC_SP_CFM_REQ_EVT: SSP confirm request.
|-
|-
| 2 || || Triggered by BSA_SEC_SUSPENDED_EVT: ACL Link is now Suspended.
| 2 || || [12.0.0+] Triggered by BSA_SEC_RESUMED_EVT: ACL Link is now Resumed.
|-
| 3 ([1.0.0-11.0.1] 2) || || Triggered by BSA_SEC_SUSPENDED_EVT: ACL Link is now Suspended.
|}
|}
| 3 ([1.0.0-11.0.1] 9) || || Response to GET_REPORT.
| 3 ([1.0.0-11.0.1] 9) || || Response to GET_REPORT.
|-
|-
| 7 || || Response for extensions. Only used with [[#GetHidEventInfo]].
| [1.0.0-11.0.1] 7 || || Response for extensions. Only used with [[#GetHidEventInfo]].
|}
|}
|-
|-
| 7 || Only for [[#EventInfo]]: triggered after enabling bluetooth, when a global state field is value 4 or 2.
| 7 || Only for [[#EventInfo]]: triggered after enabling bluetooth, when a global state field is value 4 or 2.
|-
| 9 || [12.0.0+] Only for [[#EventInfo]]: triggered when bluetooth errors occur in a certain range, with various Audio interface vfuncs.
|}
|}
[12.0.0+]:
[12.0.0+]:
{...}
{| class="wikitable" border="1"
|-
= AdapterPropertySet =
! Offset
This is "nn::bluetooth::hal::AdapterPropertySet". This is a 0x102-byte struct.
! Size
! Description
|-
| 0x0 || 0x1 || [[#AdapterPropertyType]]
|-
| 0x1 || 0x1 || Data size
|-
| 0x2 || {Above size} || Data, as specified by the type.
|}
= AdapterPropertySet =
This is "nn::bluetooth::hal::AdapterPropertySet". This is a 0x102-byte struct.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x6 || Same as the data for [[#AdapterPropertyType]] type0.
|-
| 0x6 || 0x3 || Same as the data for [[#AdapterPropertyType]] type2.
|-
| 0x9 || 0xF9 || Same as the data for [[#AdapterPropertyType]] type1.
|}
= Address =
= Address =
This is "nn::bluetooth::Address". This is a 0x6-byte struct with 1-byte alignment.
This is "nn::bluetooth::Address". This is a 0x6-byte struct with 1-byte alignment.
|}
|}
[[#EventType|Type5]]:
[[#EventType|Type2]] ([1.0.0-11.0.1] type5):
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|}
|}
[[#EventType|Type6]]:
[1.0.0-11.0.1] [[#EventType|Type6]]:
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|}
|}
[[#EventType|Type7]]:
[12.0.0+] [[#EventType|Type3]]:
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x4 || Status, always 0 except with [[#ConnectionEventType|event0]]: 2 = ACL Link is now Resumed (BSA_SEC_RESUMED_EVT), 9 = connection failed (pairing/authentication failed, or opening the hid connection failed).
| 0x0 || 0x6 || Device [[#Address|address]].
|-
| 0x6 || 0xF9 || Device name, NUL-terminated string.
|-
| 0xFF || 0x3 || Class of Device.
|-
|-
| 0x4 || 0x6 || Device [[#Address|address]].
| 0x102 || 0x1 || bool flag for Just Works. With SSP passkey notification this is always 0.
|-
|-
| 0xA || 0x2 || Padding
| 0x103 || 0x1 || Padding
|-
|-
| 0xC || 0x4 || [[#ConnectionEventType]]
| 0x104 || 0x4 || s32 Passkey
|}
|}
[1.0.0-8.1.1] [[#EventType|Type7]]:
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Size
! Size
! Description
! Description
|-
| 0x0 || 0x6 || Device [[#Address|address]].
|-
|-
| 0x0 || 0x2 || [[#FatalReason]]
| 0x6 || 0x2 || Padding
|-
| 0x8 || 0x4 || Status, always 0 except with [[#ConnectionEventType|event0]]: 2 = ACL Link is now Resumed (BSA_SEC_RESUMED_EVT), 9 = connection failed (pairing/authentication failed, or opening the hid connection failed).
|-
| 0xC || 0x4 || [[#ConnectionEventType]]
|}
|}
[9.0.0-11.0.1] [[#EventType|Type7]]:
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0xF || PinCode
| 0x0 || 0x4 || Status, always 0 except with [[#ConnectionEventType|event0]]: 2 = ACL Link is now Resumed (BSA_SEC_RESUMED_EVT), 9 = connection failed (pairing/authentication failed, or opening the hid connection failed).
|-
| 0x4 || 0x6 || Device [[#Address|address]].
|-
| 0xA || 0x2 || Padding
|-
|-
| 0xF || 0x1 || PinCode length, must be 0x1-0xF otherwise the sysmodule will Abort.
| 0xC || 0x4 || [[#ConnectionEventType]]
|}
|}
[12.0.0+] [[#EventType|Type4]]:
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x2 || Size of the following data.
| 0x0 || 0x4 || [[#ConnectionEventType]]
|-
|-
| 0x2 || 0x280 || Data
| 0x4 || 0x6 || Device [[#Address|address]].
|-
| 0xA || 0xFE || Reserved
|}
|}
[12.0.0+] [[#EventType|Type5]]:
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x2 || Size of the following data.
| 0x0 || 0x6 || Device [[#Address|address]].
|-
| 0x6 || 0x1 || Status flag: 1 = success, 0 = failure.
|-
|-
| 0x2 || 0x2BC || Data
| 0x7 || 0x1 || Tsi value, when the above indicates success.
|}
|}
[12.0.0+] [[#EventType|Type6]]:
= PacketLostRate =
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x6 || Device [[#Address|address]].
|-
| 0x6 || 0x1 || Status flag: 1 = success, 0 = failure.
|-
| 0x7 || 0x1 || Input bool value from [[#EnableBurstMode]], when the above indicates success.
|}
[12.0.0+] [[#EventType|Type7]]:
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x4 ||
| 0x0 || 0x6 || Device [[#Address|address]].
|-
|-
| 0x4 || 0x1 ||
| 0x6 || 0x1 || Status flag: 1 = success, 0 = failure.
|-
|-
| 0x5 || 0x1 || Size of the data at +0x6.
| 0x7 || 0x1 || Bool flag, when the above indicates success.
|}
[12.0.0+] [[#EventType|Type8]]:
{| class="wikitable" border="1"
|-
|-
! Offset
! Size
! Description
|-
|-
| 0x25 || 0x3 || Padding
| 0x0 || 0x1 || Status flag: 0 = failure, 1 = success.
|-
|-
| 0x28 || 0x1 || Total array entries for the below array, can be 0.
| 0x1 || 0x3 || Padding
|-
|-
| 0x29 || 0x7 || Padding
| 0x4 || 0x4 || Count value.
|}
[12.0.0+] [[#EventType|Type9]]:
{| class="wikitable" border="1"
|-
|-
! Offset
! Size
! Description
|-
|-
| 0xA4 || 0x1 || Size of the data at +0xA8.
| 0x0 || 0x6 || Device [[#Address|address]].
|-
|-
| 0xC8 || 0x1 ||
| 0x6 || 0x1 || Status flag: 1 = success, 0 = failure.
|}
|}
[[#EventType|Type10]] ([1.0.0-11.0.1] type13):
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x2 ||
| 0x0 || 0x2 || [[#FatalReason]]
|}
|}
= BleAdvertiseFilter =
= HidEventInfo =
This is "nn::bluetooth::BleAdvertiseFilter". This is a 0x3E-byte struct.
This is the output buffer for [[#GetHidEventInfo]] / events in sharedmem. The data stored here depends on the [[#HidEventType]].
[[#HidEventType|Type0]], for [[#GetHidEventInfo]]:
[1.0.0-11.0.1]
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Description
! Description
|-
|-
| 0x0 || 0x1 ||
| 0x0 || 0x6 || Device [[#Address|address]].
|-
|-
| 0x1 || 0x6 || [[#Address]]
| 0x6 || 0x2 || Padding
|-
|-
| 0x7 || 0x139 ||
| 0x8 || 0x4 || Status: 0 = hid connection opened, 2 = hid connection closed, 8 = failed to open hid connection.
|}
|}
[12.0.0+]
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
! Description
! Description
|-
|-
| 0x0 || 0x4 || ConnectionHandle, 0xFFFFFFFF ([5.0.0-5.0.2] 0xFFFF) is invalid.
| 0x0 || 0x4 || Status: 0 = hid connection closed, 1 = hid connection opened, 2 = failed to open hid connection.
|-
|-
| 0x4 || 0x6 || Device [[#Address|address]].
|}
|}
= GattAttributeUuid =
= BluetoothPinCode =
This is "nn::bluetooth::GattAttributeUuid". This is a 0x14-byte struct with 4-byte alignment.
This is "nn::bluetooth::BluetoothPinCode". This is a 0x10-byte struct with 1-byte alignment.
= PinCode =
This is "nn::bluetooth::hal::PinCode". This is a 0x11-byte struct with 1-byte alignment.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x4 || UUID size, must be 0x2, 0x4, or 0x10.
| 0x0 || 0xF || PinCode
|-
|-
| 0x4 || 0x10 || UUID with the above size.
| 0xF || 0x1 || PinCode length, must be 0x1-0xF otherwise the sysmodule will Abort.
|}
|}
= GattId =
= ServiceFlag =
This is "nn::bluetooth::GattId". This is a 0x18-byte struct with 4-byte alignment.
This is "nn::bluetooth::hal::ServiceFlag". This is the same as the BSA service-mask.
= HidData =
This is "nn::bluetooth::HidData". This is a 0x282-byte struct.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x1 || InstanceId
| 0x0 || 0x2 || Size of the following data.
|-
|-
| 0x1 || 0x3 || Padding
| 0x2 || 0x280 || Data
|}
|}
= LeEventInfo =
= HidReport =
This is a 0x400-byte struct.
This is "nn::bluetooth::HidReport". This is a 0x2BE-byte struct.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Description
! Description
|-
|-
| 0x0 || 0x4 ||
| 0x0 || 0x2 || Size of the following data.
|-
|-
| 0x4 || 0x4 ||
| 0x2 || 0x2BC || Data
|-
|}
= PlrStatistics =
This is "nn::bluetooth::PlrStatistics". This is a 0x84-byte struct.
= PlrList =
This is "nn::bluetooth::PlrList". This is a 0xA4-byte struct.
= PacketLostRate =
This is "nn::bluetooth::hal::PacketLostRate".
= BleClientGattOperationInfo =
= ChannelMapList =
This is "nn::bluetooth::BleClientGattOperationInfo". This is converted from [[#LeEventInfo]].
This is "nn::bluetooth::ChannelMapList". This is a 0x88-byte struct.
= Channel =
This is "nn::bluetooth::hal::Channel".
= LeChannel =
This is "nn::bluetooth::hal::LeChannel".
= LeConnectionParams =
This is "nn::bluetooth::LeConnectionParams". This is a 0x14-byte struct with 2-byte alignment.
| 0x1 || 0x3 || Padding
= BleConnectionParameter =
This is "nn::bluetooth::BleConnectionParameter". This is a 0xC-byte struct with 2-byte alignment.
= BleAdvertisePacketData =
This is "nn::bluetooth::BleAdvertisePacketData" ([5.0.0-8.1.1] "nn::bluetooth::LeAdvertiseData"). This is a 0xCC-byte struct.
{| class="wikitable" border="1"
|-
|-
! Offset
! Size
! Description
|-
|-
| 0x8 || 0x1 || Same as [[#LeEventInfo]]+0x8.
| 0x0 || 0x4 ||
|-
|-
| 0x9 || 0x3 || Padding
| 0x4 || 0x1 ||
|-
|-
| 0xC || 0x14 || Same as [[#LeEventInfo]]+0xC.
| 0x5 || 0x1 || Size of the data at +0x6.
|-
|-
| 0x20 || 0x14 || Same as [[#LeEventInfo]]+0x20.
| 0x6 || 0x1F ||
|-
|-
| 0x34 || 0x14 || Same as [[#LeEventInfo]]+0x34.
| 0x25 || 0x3 || Padding
|-
|-
| 0x48 || 0x8 || Same as [[#LeEventInfo]]+0x48.
| 0x28 || 0x1 || Total array entries for the below array, can be 0.
|-
|-
| 0x50 || {above size} || Same as [[#LeEventInfo]]+0x4A.
| 0x29 || 0x7 || Padding
|}
|-
| 0x30 || count*0x14 || Array entries, see below.
= AudioEventType =
|-
This is "nn::bluetooth::hal::AudioEventType". This is an u32 enum.
| 0xA4 || 0x1 || Size of the data at +0xA8.
|-
= PcmParameter =
| 0xA5 || 0x1 ||
This is "nn::bluetooth::system::PcmParameter". This is a 0xC-byte struct with 4-byte alignment.
|-
| 0xA6 || 0x2 || Padding
= AudioOutState =
|-
This is "nn::bluetooth::system::AudioOutState". This is an u32 enum.
| 0xA8 || 0x1F ||
|-
= AudioCodec =
| 0xC7 || 0x1 ||
This is "nn::bluetooth::system::AudioCodec". This is an u32 enum.
|-
| 0xC8 || 0x1 ||
= AudioControlButtonState =
|-
This is "nn::bluetooth::system::AudioControlButtonState". This is a 0x10-byte struct.
| 0xC9 || 0x3 || Padding
|}
= Notes =
The output from <code>sudo hcitool info {BDADDR}</code> is identical for [1.0.0-11.0.0]:
Array entry:
BD Address: {BDADDR}
{| class="wikitable" border="1"
OUI Company: Nintendo Co.,Ltd (98-B6-E9)
|-
Device Name: Nintendo Switch
! Offset
LMP Version: 4.2 (0x8) LMP Subversion: 0x2409
! Size
Manufacturer: Broadcom Corporation (15)
! Description
Features page 0: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
|-
<3-slot packets> <5-slot packets> <encryption> <slot offset>
| 0x0 || 0x2 ||
|-
| 0x2 || 0x12 || Unused
|}
= BleAdvertiseFilter =
This is "nn::bluetooth::BleAdvertiseFilter". This is a 0x3E-byte struct.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x1 || FilterId
|-
| 0x1 || 0x1 || CondDataSize. Only used with CondType Manu.
|-
| 0x2 || 0x1 || CondType
|-
| 0x3 || 0x1D || CondData, content depends on CondType.
|-
| 0x20 || 0x1D || Mask. Only used with CondType Manu. +0 = u16 CompanyIdMask, then {pattern mask}.
|-
| 0x3D || 0x1 || MaskSize. Only used with CondType Manu.
|}
CondType:
{| class="wikitable" border="1"
|-
! Value
! Name
! Description
|-
| 2-3 || || ServiceUuid16. CondData = 16bit UUID which is byteswapped.
|-
| 4-5 || || ServiceUuid32. CondData = 32bit UUID which is byteswapped.
|-
| 6-7 || || ServiceUuid128. CondData = 128bit UUID which is copied raw into the param struct.
|-
| 255 || || Manu. CondData: u16 CompanyId, then {pattern data}.
|}
To pass filtering, the BLE advert data should be: data & Mask == CondData (following the type field in the advert entry with the matching type).
= BleAdvertisePacketParameter =
This is "nn::bluetooth::BleAdvertisePacketParameter". This is a 8-byte struct with 1-byte alignment.
[[BTM_services#StartBleScanForGeneral|StartBleScanForGeneral]] generates a [[#BleAdvertiseFilter]] from this. CondType = Manu, CondDataSize = 0xA. CondData: +0 = u16 CompanyId, u8 +2 = 0x1, +3 = {data copied from PatternData, then an u8 with value 0x0}. MaskSize = 0x9, Mask = {all 0xFF}.
[[BTM_services#StartBleScanForPaired|StartBleScanForPaired]] generates a [[#BleAdvertiseFilter]] from this, similar to the above. CondType = Manu, CondDataSize = 0x11. CondData: +0 = u16 CompanyId, u8 +2 = 0x1, +3 = {data copied from PatternData, then an u8 with value 0x0, then {6-byte system btaddr}}. MaskSize = 0x10, Mask = {all 0xFF except u8 +0x9 which is 0x0}.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x2 || CompanyId
|-
| 0x2 || 0x6 || PatternData
|}
= BleScanResult =
This is "nn::bluetooth::BleScanResult". This is a 0x148-byte struct.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x1 ||
|-
| 0x1 || 0x6 || [[#Address]]
|-
| 0x7 || || Array of entries where each entry is 0x1F-bytes. hid compares +1 with 0xFF and +0x2 with the cached output from [[#BTM_services#GetBleScanParameterGeneral|GetBleScanParameterGeneral]] (entry+0x4 is skipped over).
|-
| 0x140 || 0x4 || s32 Total entries in the array at 0x8.
|-
| 0x144 || 0x4 || s32
|}
= BleConnectionInfo =
This is "nn::bluetooth::BleConnectionInfo". This is a 0xC-byte struct.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x4 || ConnectionHandle, 0xFFFFFFFF ([5.0.0-5.0.2] 0xFFFF) is invalid.
|-
| 0x4 || 0x6 || [[#Address]]
|-
| 0xA || 0x2 || Padding
|-
|}
= GattAttributeUuid =
This is "nn::bluetooth::GattAttributeUuid". This is a 0x14-byte struct with 4-byte alignment.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x4 || [[#BleGattUuid]] size. Must be 0x2, 0x4, or 0x10.
|-
| 0x4 || 0x10 || [[#BleGattUuid]] with the above size.
|}
= GattId =
This is "nn::bluetooth::GattId". This is a 0x18-byte struct with 4-byte alignment.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x1 || InstanceId
|-
| 0x1 || 0x3 || Padding
|-
| 0x4 || 0x14 || [[#GattAttributeUuid]]
|}
= BleGattUuid =
This is an enum of u16, u32 and u128 values.
{| class="wikitable" border="1"
|-
! Value
! Description
|-
| 0x2902 || ClientConfigUuid16
|-
| 0x2908 || ReportReferenceUuid16
|-
| 0x1B666C080A578E83994EA7F7BF50DDA3 || PalmaOtafuControlPointUuid128
|-
| 0x26FE2EE709244FB7914061D97A6CE8A2 || PalmaOtafuDataUuid128
|-
| 0x45CEF889AF8E0784664404737C7FBE2B || NbatUuid128
|-
| 0x46CEF889AF8E0784664404737C7FBE2B || BatteryLevelUuid128
|-
| 0x47CEF889AF8E0784664404737C7FBE2B || BatteryStateUuid128
|-
| 0xD88B7646729DBDA17A4425F4101126C7 || PalmaOtafuUuid128
|-
| 0xE5237AE2516B55BB67456DF36CE17566 || NhogUuid128
|-
| 0xE6237AE2516B55BB67456DF36CE17566 || InputReportUuid128
|-
| 0xE7237AE2516B55BB67456DF36CE17566 || OutputCommandUuid128
|-
| 0xE8237AE2516B55BB67456DF36CE17566 || CommandResponseUuid128
|}
= BleClientGattOperationStatus =
This is an u8 enum. This is converted from the [[#LeEventInfo]] status field.
{| class="wikitable" border="1"
|-
! Value
! Name
! Description
|-
| 0 || || Same as [[#LeEventInfo]] status 0.
|-
| 1 || || Same as [[#LeEventInfo]] status 55.
|-
| 2 || || Same as [[#LeEventInfo]] status 25, 52.
|-
| 3 || || Same as [[#LeEventInfo]] status 4, 16, 21, 50.
|-
| 4 || || Same as [[#LeEventInfo]] status 5.
|-
| 5 || || Same as [[#LeEventInfo]] status 6.
|-
| 6 || || Same as [[#LeEventInfo]] status 7.
|-
| 7 || || Same as [[#LeEventInfo]] status 9.
|-
| 8 || || Same as [[#LeEventInfo]] status 13.
|-
| 9 || || Used as the default case when the [[#LeEventInfo]] status is unrecognized.
|-
| 10 || || Same as [[#LeEventInfo]] status 35.
|}
= LeEventInfo =
This is a 0x400-byte struct.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x4 || Status. 0 = success, non-zero = error.
|-
| 0x4 || 0x4 || ConnectionId
|-
| 0x8 || 0x1 || Flags. Bit0 = IsWrite, bit1 = IsDescriptor, bit2 = IsNotify.
When bit2 is set, bit0 = IsIndication.
|-
| 0x9 || 0x3 || Padding
|-
| 0xC || 0x14 || Service [[#GattAttributeUuid]]
|-
| 0x20 || 0x14 || Characteristic [[#GattAttributeUuid]]
|-
| 0x34 || 0x14 || Descriptor [[#GattAttributeUuid]]
|-
| 0x48 || 0x2 || Size of the below data.
|-
| 0x4A || 0x200 || Data with the above size.
|}
= BleClientGattOperationInfo =
This is "nn::bluetooth::BleClientGattOperationInfo". This is converted from [[#LeEventInfo]].
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x1 || [[#BleClientGattOperationStatus]]
|-
| 0x1 || 0x3 || Padding
|-
| 0x4 || 0x4 || Same as [[#LeEventInfo]]+0x4.
|-
| 0x8 || 0x1 || Same as [[#LeEventInfo]]+0x8.
|-
| 0x9 || 0x3 || Padding
|-
| 0xC || 0x14 || Same as [[#LeEventInfo]]+0xC.
|-
| 0x20 || 0x14 || Same as [[#LeEventInfo]]+0x20.
|-
| 0x34 || 0x14 || Same as [[#LeEventInfo]]+0x34.
|-
| 0x48 || 0x8 || Same as [[#LeEventInfo]]+0x48.
|-
| 0x50 || {above size} || Same as [[#LeEventInfo]]+0x4A.
|}
= AudioEventType =
This is "nn::bluetooth::hal::AudioEventType". This is an u32 enum.
{| class="wikitable" border="1"
|-
! Value
! Name
! Description
|-
| 0 || || None
|-
| 1 || || Connection
|}
= AudioEventInfo =
This is the output buffer for [[#GetAudioEventInfo]]. The data stored here depends on the [[#AudioEventType]].
[[#AudioEventType|Type1]]:
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x4 || Status: 0 = AV connection closed, 1 = AV connection opened, 2 = failed to open AV connection.
|-
| 0x4 || 0x6 || Device [[#Address|address]].
|-
| 0xA || 0x2 || Padding
|}
= PcmParameter =
This is "nn::bluetooth::system::PcmParameter". This is a 0xC-byte struct with 4-byte alignment.
The sysmodule will Abort if any of these fields are invalid.
{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0 || 0x4 || Must be 0-3. Controls number of channels: 0 = mono, non-zero = stereo.
|-
| 0x4 || 0x4 || s32 SampleRate. Must be one of the following: 16000, 32000, 44100, 48000.
|-
| 0x8 || 0x4 || Bits per sample. Must be 8 or 16.
|}
= AudioOutState =
This is "nn::bluetooth::system::AudioOutState". This is an u32 enum.
{| class="wikitable" border="1"
|-
! Value
! Description
|-
| 0 || Stopped
|-
| 1 || Started
|}
= AudioCodec =
This is "nn::bluetooth::system::AudioCodec". This is an u32 enum.
{| class="wikitable" border="1"
|-
! Value
! Description
|-
| 0 || Raw PCM
|}
= AudioControlButtonState =
This is "nn::bluetooth::system::AudioControlButtonState". This is a 0x10-byte struct.
= AvrcEventType =
This is "nn::bluetooth::hal::AvrcEventType".
= AvrcOperationId =
This is "nn::bluetooth::hal::AvrcOperationId". This is the same as tBSA_AV_RC.
= AvrcStateType =
This is "nn::bluetooth::hal::AvrcStateType". This is the same as tBSA_AV_STATE.
= Notes =
The output from <code>sudo hcitool info {BDADDR}</code> is identical for [1.0.0-11.0.0]:
BD Address: {BDADDR}
OUI Company: Nintendo Co.,Ltd (98-B6-E9)
Device Name: Nintendo Switch
LMP Version: 4.2 (0x8) LMP Subversion: 0x2409
Manufacturer: Broadcom Corporation (15)
Features page 0: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <sniff mode> <RSSI>
<timing accuracy> <role switch> <sniff mode> <RSSI>
<channel quality> <SCO link> <HV2 packets> <HV3 packets>
<channel quality> <SCO link> <HV2 packets> <HV3 packets>
The bluetooth stack is Broadcom/Cypress brcm BSA (for example, see [https://github.com/hardkernel/buildroot_linux_amlogic_brcm-bsa here]).
The bluetooth stack is Broadcom/Cypress brcm BSA (for example, see [https://github.com/hardkernel/buildroot_linux_amlogic_brcm-bsa here]).
Various btdrv service commands use a custom BSA extension (message-ids based at 0x8CA/2250), this is referred to as "robson".
Various btdrv service commands use a custom BSA extension (message-ids based at 0x8CA/2250), this is referred to as "robson". The following BSA modules are supported by the BSA server task thread (including the aforementioned robson): sys, dm, disc, sec, hh, [12.0.0+] av, dg, tm, ble.
The following L2CAP services are registered (dynamic channels): SDP, ATT (GATT), RFCOMM, HID (PSMs: 0x11, 0x13, 0x8001, 0x8003).
The following L2CAP services are registered (dynamic channels): SDP, ATT (GATT), RFCOMM, HID (PSMs: 0x11, 0x13, 0x8001, 0x8003), [12.0.0+] AVCTP/AVCTP_Browsing (only when the features bitfield passed to BSA_AvEnable by [[#EnableBluetooth]] has bit0 ("remote control target") or bit1 set), [12.0.0+] AVDTP.
<code>l2cu_send_peer_echo_rsp</code> is called with p_data=NULL and data_len=0, therefore no data is returned in the L2CAP ECHO response.
<code>l2cu_send_peer_echo_rsp</code> is called with p_data=NULL and data_len=0, therefore no data is returned in the L2CAP ECHO response.
| CYW4356A3_001.004.009.0092.0095
| CYW4356A3_001.004.009.0092.0095
|-
|-
| [12.0.0]
| [12.0.0-14.1.2]
| BSA0106_01.60.00_
| BSA0106_01.60.00_
| Hayward_T3_RC_20210224
| Hayward_T3_RC_20210224
| CYW4356A3_001.004.009.0092.0095
| CYW4356A3_001.004.009.0092.0095
|-
| [15.0.0-19.0.0]
| BSA0106_01.60.00_
| Hayward_T3_RC_20210224
| BCM4356A3 UART 37.4 MHz wlbga_bu
|}
|}
<code>bsa_sv_tm_read_version_excback</code> copies bsa_version_string and concats with bsa_version_info_string to generate <code>tBSA_TM_READ_VERSION.bsa_server_version</code>.
<code>bsa_sv_tm_read_version_excback</code> copies bsa_version_string and concats with bsa_version_info_string to generate <code>tBSA_TM_READ_VERSION.bsa_server_version</code>.
* [15.0.0]: In the HCI memwrite data, only config data was changed, no code changes.
[[Category:Services]]
[[Category:Services]]