Secure Monitor: Difference between revisions

Line 627:

Hardware is '''Icosa''' (Erista retail, EDEV and SDEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 1 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 0.

Hardware is '''Copper''' (Erista ~~simulation~~) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.

Hardware is '''Copper''' (unreleased Erista model) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.

[4.0.0+] Hardware is '''Iowa''' (Mariko retail, EDEV and SDEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType3]] (bits 16-19) is 1.

Line 633:

[8.0.0+] Hardware is '''Hoag''' (Mariko Lite retail and HDEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType3]] (bits 16-19) is 2.

[8.0.0+] Hardware is '''Calcio''' (Mariko ~~simulation~~) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.

[8.0.0+] Hardware is '''Calcio''' (unreleased Mariko model) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.

[10.0.0+] Hardware is '''Aula''' (Mariko OLED Model retail and ADEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType3]] (bits 16-19) is 4.

Line 744:

|-

| 2

| ~~PerformanceMonitoringUnit~~

| EnablePmuAccess

|-

| 3

| [8.0.0+] ~~EnableApplicationExtraThread~~

| [8.0.0+] EnableExtraThreadResourceAllocation

|-

| 4

| [13.0.0+] DisableDynamicSystemResourceAllocation

|-

| 8

Line 762:

Line 765:

'''EnableUserExceptionHandler''' is a boolean determining whether kernel should forcefully enable usermode exception handlers (when false, only certain aborts (((1LL << (esr >> 26)) & 0x1115804400224001) == 0, typically data/prefetch aborts) that occur when the faulting address is in a readable region with MemoryType_CodeStatic will trigger usermode exception handlers).

'''~~PerformanceMonitoringUnit~~''' is a boolean determining whether kernel should enable usermode access to the Performance Monitors (whether PMUSERENR_EL0 should be 1 or 0).

'''EnablePmuAccess''' is a boolean determining whether kernel should enable usermode access to the Performance Monitors (whether PMUSERENR_EL0 should be 1 or 0).

'''~~EnableApplicationExtraThread~~''' is a boolean determining whether the kernel should increase the KThread slabheap capacity by 160. This also increases object capacities that are calculated based on number of threads.

'''EnableExtraThreadResourceAllocation''' is a boolean determining whether the kernel should increase the KThread slabheap capacity by 160. This also increases object capacities that are calculated based on number of threads.

'''CallShowErrorOnPanic''' is a boolean determining whether kernel should call smcPanic on error instead of infinite-looping.

@@ Line 627: / Line 627: @@
 Hardware is '''Icosa''' (Erista retail, EDEV and SDEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 1 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 0.
-Hardware is '''Copper''' (Erista simulation) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.
+Hardware is '''Copper''' (unreleased Erista model) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.
 [4.0.0+] Hardware is '''Iowa''' (Mariko retail, EDEV and SDEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType3]] (bits 16-19) is 1.
@@ Line 633: / Line 633: @@
 [8.0.0+] Hardware is '''Hoag''' (Mariko Lite retail and HDEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType3]] (bits 16-19) is 2.
-[8.0.0+] Hardware is '''Calcio''' (Mariko simulation) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.
+[8.0.0+] Hardware is '''Calcio''' (unreleased Mariko model) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType1]] (bit 2) is 0 and [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType2]] (bit 8) is 1.
 [10.0.0+] Hardware is '''Aula''' (Mariko OLED Model retail and ADEV) if [[Fuse_registers#FUSE_RESERVED_ODM4|HardwareType3]] (bits 16-19) is 4.
@@ Line 744: / Line 744: @@
 |-
 | 2
-| PerformanceMonitoringUnit
+| EnablePmuAccess
 |-
 | 3
-| [8.0.0+] EnableApplicationExtraThread
+| [8.0.0+] EnableExtraThreadResourceAllocation
+|-
+| 4
+| [13.0.0+] DisableDynamicSystemResourceAllocation
 |-
 | 8
@@ Line 762: / Line 765: @@
 '''EnableUserExceptionHandler''' is a boolean determining whether kernel should forcefully enable usermode exception handlers (when false, only certain aborts (((1LL << (esr >> 26)) & 0x1115804400224001) == 0, typically data/prefetch aborts) that occur when the faulting address is in a readable region with MemoryType_CodeStatic will trigger usermode exception handlers).
-'''PerformanceMonitoringUnit''' is a boolean determining whether kernel should enable usermode access to the Performance Monitors (whether PMUSERENR_EL0 should be 1 or 0).
+'''EnablePmuAccess''' is a boolean determining whether kernel should enable usermode access to the Performance Monitors (whether PMUSERENR_EL0 should be 1 or 0).
-'''EnableApplicationExtraThread''' is a boolean determining whether the kernel should increase the KThread slabheap capacity by 160. This also increases object capacities that are calculated based on number of threads.
+'''EnableExtraThreadResourceAllocation''' is a boolean determining whether the kernel should increase the KThread slabheap capacity by 160. This also increases object capacities that are calculated based on number of threads.
 '''CallShowErrorOnPanic''' is a boolean determining whether kernel should call smcPanic on error instead of infinite-looping.