Difference between revisions of "HID services"
Line 2,490: | Line 2,490: | ||
|- | |- | ||
| 0x20 || Handheld | | 0x20 || Handheld | ||
+ | |} | ||
+ | |||
+ | = NpadJoyAssignmentMode = | ||
+ | This is u32 enum "nn::hid::NpadJoyAssignmentMode". | ||
+ | |||
+ | {| class="wikitable" border="1" | ||
+ | ! Value | ||
+ | ! Description | ||
+ | |- | ||
+ | | 0 || Dual (Set by [[#SetNpadJoyAssignmentModeDual]]) | ||
+ | |- | ||
+ | | 1 || Single (Set by [[#SetNpadJoyAssignmentModeSingleByDefault]]/[[#SetNpadJoyAssignmentModeSingle]]) | ||
|} | |} | ||
Revision as of 06:23, 15 November 2020
See here for the HID shared-memory.
hid
This is "nn::hid::IHidServer".
Cmd | Name |
---|---|
0 | #CreateAppletResource |
1 | ActivateDebugPad |
11 | ActivateTouchScreen |
21 | ActivateMouse |
31 | ActivateKeyboard |
32 | [6.0.0+] SendKeyboardLockKeyEvent |
40 | AcquireXpadIdEventHandle |
41 | ReleaseXpadIdEventHandle |
51 | ActivateXpad |
55 | GetXpadIds |
56 | ActivateJoyXpad |
58 | GetJoyXpadLifoHandle |
59 | GetJoyXpadIds |
60 | ActivateSixAxisSensor |
61 | DeactivateSixAxisSensor |
62 | GetSixAxisSensorLifoHandle |
63 | ActivateJoySixAxisSensor |
64 | DeactivateJoySixAxisSensor |
65 | GetJoySixAxisSensorLifoHandle |
66 | StartSixAxisSensor |
67 | StopSixAxisSensor |
68 | IsSixAxisSensorFusionEnabled |
69 | EnableSixAxisSensorFusion |
70 | #SetSixAxisSensorFusionParameters |
71 | #GetSixAxisSensorFusionParameters |
72 | #ResetSixAxisSensorFusionParameters |
73 | SetAccelerometerParameters |
74 | GetAccelerometerParameters |
75 | ResetAccelerometerParameters |
76 | SetAccelerometerPlayMode |
77 | GetAccelerometerPlayMode |
78 | ResetAccelerometerPlayMode |
79 | #SetGyroscopeZeroDriftMode |
80 | #GetGyroscopeZeroDriftMode |
81 | #ResetGyroscopeZeroDriftMode |
82 | IsSixAxisSensorAtRest |
83 | [6.0.0+] IsFirmwareUpdateAvailableForSixAxisSensor |
91 | ActivateGesture |
100 | #SetSupportedNpadStyleSet |
101 | #GetSupportedNpadStyleSet |
102 | #SetSupportedNpadIdType |
103 | #ActivateNpad |
104 | #DeactivateNpad |
106 | #AcquireNpadStyleSetUpdateEventHandle |
107 | DisconnectNpad |
108 | GetPlayerLedPattern |
109 | [5.0.0+] #ActivateNpadWithRevision |
120 | #SetNpadJoyHoldType |
121 | #GetNpadJoyHoldType |
122 | #SetNpadJoyAssignmentModeSingleByDefault |
123 | #SetNpadJoyAssignmentModeSingle |
124 | #SetNpadJoyAssignmentModeDual |
125 | #MergeSingleJoyAsDualJoy |
126 | StartLrAssignmentMode |
127 | StopLrAssignmentMode |
128 | SetNpadHandheldActivationMode |
129 | #GetNpadHandheldActivationMode |
130 | SwapNpadAssignment |
131 | IsUnintendedHomeButtonInputProtectionEnabled |
132 | EnableUnintendedHomeButtonInputProtection |
133 | [5.0.0+] SetNpadJoyAssignmentModeSingleWithDestination |
134 | [6.1.0+] SetNpadAnalogStickUseCenterClamp |
135 | [8.0.0+] SetNpadCaptureButtonAssignment |
136 | [8.0.0+] ClearNpadCaptureButtonAssignment |
200 | #GetVibrationDeviceInfo |
201 | #SendVibrationValue |
202 | #GetActualVibrationValue |
203 | #CreateActiveVibrationDeviceList |
204 | #PermitVibration |
205 | #IsVibrationPermitted |
206 | #SendVibrationValues |
207 | [4.0.0+] SendVibrationGcErmCommand |
208 | [4.0.0+] GetActualVibrationGcErmCommand |
209 | [4.0.0+] BeginPermitVibrationSession |
210 | [4.0.0+] EndPermitVibrationSession |
211 | [7.0.0+] #IsVibrationDeviceMounted |
300 | [3.0.0+] #ActivateConsoleSixAxisSensor |
301 | [3.0.0+] StartConsoleSixAxisSensor |
302 | [3.0.0+] StopConsoleSixAxisSensor |
303 | [5.0.0+] #ActivateSevenSixAxisSensor |
304 | [5.0.0+] #StartSevenSixAxisSensor |
305 | [5.0.0+] #StopSevenSixAxisSensor |
306 | [5.0.0+] #InitializeSevenSixAxisSensor |
307 | [5.0.0+] #FinalizeSevenSixAxisSensor |
308 | [5.0.0+] #SetSevenSixAxisSensorFusionStrength |
309 | [5.0.0+] #GetSevenSixAxisSensorFusionStrength |
310 | [6.0.0+] #ResetSevenSixAxisSensorTimestamp |
400 | [3.0.0+] IsUsbFullKeyControllerEnabled |
401 | [3.0.0+] EnableUsbFullKeyController |
402 | [3.0.0+] IsUsbFullKeyControllerConnected |
403 | [4.0.0+] HasBattery |
404 | [4.0.0+] HasLeftRightBattery |
405 | [4.0.0+] #GetNpadInterfaceType |
406 | [4.0.0+] GetNpadLeftRightInterfaceType |
407 | [10.0.0+] GetNpadOfHighestBatteryLevel ([9.0.0+] GetNpadOfHighestBatteryLevelForJoyLeft) |
408 | [9.0.0-9.2.0] GetNpadOfHighestBatteryLevelForJoyRight |
500 | [5.0.0+] GetPalmaConnectionHandle |
501 | [5.0.0+] InitializePalma |
502 | [5.0.0+] AcquirePalmaOperationCompleteEvent |
503 | [5.0.0+] GetPalmaOperationInfo |
504 | [5.0.0+] PlayPalmaActivity |
505 | [5.0.0+] SetPalmaFrModeType |
506 | [5.0.0+] ReadPalmaStep |
507 | [5.0.0+] EnablePalmaStep |
508 | [5.0.0+] ResetPalmaStep |
509 | [5.0.0+] ReadPalmaApplicationSection |
510 | [5.0.0+] WritePalmaApplicationSection |
511 | [5.0.0+] ReadPalmaUniqueCode |
512 | [5.0.0+] SetPalmaUniqueCodeInvalid |
513 | [5.0.0+] WritePalmaActivityEntry |
514 | [5.0.0+] WritePalmaRgbLedPatternEntry |
515 | [5.0.0+] WritePalmaWaveEntry |
516 | [5.0.0+] SetPalmaDataBaseIdentificationVersion |
517 | [5.0.0+] GetPalmaDataBaseIdentificationVersion |
518 | [5.0.0+] SuspendPalmaFeature |
519 | [5.1.0+] GetPalmaOperationResult |
520 | [5.1.0+] ReadPalmaPlayLog |
521 | [5.1.0+] ResetPalmaPlayLog |
522 | [5.1.0+] SetIsPalmaAllConnectable |
523 | [5.1.0+] SetIsPalmaPairedConnectable |
524 | [5.1.0+] PairPalma |
525 | [5.1.0+] SetPalmaBoostMode |
526 | [7.0.0+] CancelWritePalmaWaveEntry |
527 | [8.0.0+] EnablePalmaBoostMode |
528 | [8.0.0+] GetPalmaBluetoothAddress |
529 | [8.0.0+] SetDisallowedPalmaConnection |
1000 | SetNpadCommunicationMode |
1001 | GetNpadCommunicationMode |
1002 | [9.0.0+] SetTouchScreenConfiguration |
1003 | [9.0.0+] IsFirmwareUpdateNeededForNotification |
2000 | [10.0.0+] ActivateDigitizer |
CreateAppletResource
Takes a PID and an u64 AppletResourceUserId. Returns an #IAppletResource.
SetSixAxisSensorFusionParameters
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, two floats, and an u64 AppletResourceUserId, no output.
Official sw will throw an error before using this cmd, if the first float is outside of the bounds of 0.0f-1.0f.
GetSixAxisSensorFusionParameters
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, returns two output floats.
ResetSixAxisSensorFusionParameters
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, no output.
SetGyroscopeZeroDriftMode
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, an u32 #GyroscopeZeroDriftMode, and an u64 AppletResourceUserId, no output.
GetGyroscopeZeroDriftMode
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, returns an output u32 #GyroscopeZeroDriftMode.
Gets the value written by #SetGyroscopeZeroDriftMode.
ResetGyroscopeZeroDriftMode
Takes a PID-descriptor, an u32 #SixAxisSensorHandle, and an u64 AppletResourceUserId, no output.
Same as #SetGyroscopeZeroDriftMode except the #GyroscopeZeroDriftMode is hard-coded to value 1 (Standard).
SetSupportedNpadStyleSet
Takes a PID-descriptor, an u32 #NpadStyleTag, and an u64 AppletResourceUserId, no output.
GetSupportedNpadStyleSet
Takes a PID-descriptor and an u64 AppletResourceUserId, returns an u32 #NpadStyleTag.
SetSupportedNpadIdType
Takes a PID-descriptor, a type-0x9 input buffer, and an AppletResourceUserId. No output.
The input buffer contains an array of u32 #NpadIdType.
ActivateNpad
Takes a PID-descriptor and an AppletResourceUserId. No output.
On newer sysvers this runs the same code as #ActivateNpadWithRevision, with revision=0.
DeactivateNpad
Takes a PID-descriptor and an AppletResourceUserId. No output.
This just returns 0.
AcquireNpadStyleSetUpdateEventHandle
Takes a PID, an input u32, an u64 AppletResourceUserId, and an u64. Returns an output event handle, autoclear for this is user-specified.
The value for the last u64 doesn't seem to matter (?): official sw sets this to the address of the structure used for storing the event which is initialized after using this cmd.
ActivateNpadWithRevision
Takes a PID-descriptor, a s32 revision, and an AppletResourceUserId. No output.
Revisions:
- 0x0: Initial revision, pre-5.0.0.
- 0x1: [5.0.0+]
- 0x2: [6.0.0+]
- 0x3: [8.0.0+]
SetNpadJoyHoldType
Takes a PID-descriptor, a s64, and an AppletResourceUserId. No output.
GetNpadJoyHoldType
Takes a PID-descriptor and an AppletResourceUserId. Returns an output s64.
sdknso will Abort when the output is not 0-1.
SetNpadJoyAssignmentModeSingleByDefault
Takes a PID-descriptor, an u32, and an AppletResourceUserId. No output.
SetNpadJoyAssignmentModeSingle
Takes a PID-descriptor, an u32, AppletResourceUserId, and s64 NpadJoyDeviceType. No output.
SetNpadJoyAssignmentModeDual
Takes a PID-descriptor, an u32, and an AppletResourceUserId. No output.
MergeSingleJoyAsDualJoy
Takes a PID-descriptor, two u32s, and an AppletResourceUserId. No output.
GetNpadHandheldActivationMode
Takes a PID and an u64 AppletResourceUserId. Returns an output u64. Official user-processes Abort if the output u64 is not 0-2.
GetVibrationDeviceInfo
Takes a #VibrationDeviceHandle. Returns an output #VibrationDeviceInfo.
SendVibrationValue
Takes a PID-descriptor, a #VibrationDeviceHandle, a #VibrationValue immediately after that, and an u64 AppletResourceUserId. No output.
GetActualVibrationValue
Takes a PID-descriptor, a #VibrationDeviceHandle, and an u64 AppletResourceUserId. Returns an output #VibrationValue.
CreateActiveVibrationDeviceList
No input. Returns an #IActiveVibrationDeviceList.
PermitVibration
Takes an input u8 bool. No output.
This affects the config displayed by System Settings.
IsVibrationPermitted
No input. Returns an output u8 bool.
SendVibrationValues
Takes an u64 AppletResourceUserId, and two type-0x9 input buffers containing an array of: #VibrationDeviceHandle for first buffer, and #VibrationValue for the second buffer.
Official sw uses the same entry-count for each array.
IsVibrationDeviceMounted
Takes a PID, an #VibrationDeviceHandle, and an u64 AppletResourceUserId, returns an output u8 bool.
ActivateConsoleSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
As of [10.0.0+] sdknso no longer uses this.
ActivateSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
Unused by official sw, #ActivateConsoleSixAxisSensor is used instead. However, internally ActivateSevenSixAxisSensor is identical to #ActivateConsoleSixAxisSensor. Deactivation is done with hiddbg DeactivateConsoleSixAxisSensor (which is unused by official sw).
StartSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
StopSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
InitializeSevenSixAxisSensor
Takes a PID, an u64 AppletResourceUserId, two u64s for the size of each TransferMemory, and two TransferMemory handles. No output.
The size of the first TransferMemory is 0x1000 with MemoryPermission=read-only, while the second one has size 0x7F000 with MemoryPermission=none. sdknso uses an user-specified buffer for this, with the second tmem immediately following the first one. sdknso later uses data at buf+0 for loading SevenSixAxisSensor state.
The data at tmem+0 has the following structure:
Offset | Size | Description |
---|---|---|
0x0 | 0x10 | Unused by sdknso. |
0x10 | 0x8 | Latest entry. |
0x18 | 0x8 | Total entries. |
0x20 | 0xA50(0x21*0x50) | Array of the below entries. |
Entry:
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Timestamp |
0x8 | 0x10 | Unused by sdknso. |
0x10 | 0x40 | SevenSixAxisSensorState |
SevenSixAxisSensorState:
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | First timestamp. |
0x8 | 0x8 | Second timestamp (in samples). |
0x10 | 0x8 | ? |
0x18 | 0x28 | float data |
FinalizeSevenSixAxisSensor
Takes a PID and an u64 AppletResourceUserId, no output.
SetSevenSixAxisSensorFusionStrength
Takes a PID, a float, and an u64 AppletResourceUserId, no output.
GetSevenSixAxisSensorFusionStrength
Takes a PID and an u64 AppletResourceUserId, returns an output float.
ResetSevenSixAxisSensorTimestamp
Takes a PID and an u64 AppletResourceUserId, no output.
GetNpadInterfaceType
Takes an input u32 NpadIdType, returns an output u8 #NpadInterfaceType.
The NpadInterfaceType must be 1-4, otherwise this will assert.
IAppletResource
Cmd | Name |
---|---|
0 | #GetSharedMemoryHandle |
No input. Returned a sharedmem handle.
IActiveVibrationDeviceList
This is "nn::hid::IActiveVibrationDeviceList".
Cmd | Name |
---|---|
0 | #ActivateVibrationDevice |
ActivateVibrationDevice
Takes an input #VibrationDeviceHandle. No output.
SixAxisSensorHandle
This is an u32.
VibrationDeviceHandle
This is an u32.
VibrationDeviceInfo
This is a 0x8-byte struct.
VibrationValue
This is a 0x10-byte struct, which contains 4 float values.
hid:dbg
This is "nn::hid::IHidDebugServer".
Cmd | Name |
---|---|
0 | DeactivateDebugPad |
1 | SetDebugPadAutoPilotState |
2 | UnsetDebugPadAutoPilotState |
10 | DeactivateTouchScreen |
11 | SetTouchScreenAutoPilotState |
12 | UnsetTouchScreenAutoPilotState |
13 | [9.0.0+] GetTouchScreenConfiguration |
20 | DeactivateMouse |
21 | SetMouseAutoPilotState |
22 | UnsetMouseAutoPilotState |
30 | DeactivateKeyboard |
31 | SetKeyboardAutoPilotState |
32 | UnsetKeyboardAutoPilotState |
50 | DeactivateXpad |
51 | [1.0.0-9.2.0] SetXpadAutoPilotState |
52 | [1.0.0-9.2.0] UnsetXpadAutoPilotState |
53 ([1.0.0-8.1.0] 60) | [1.0.0-9.2.0] #DeactivateJoyXpad |
60 | [9.0.0+] ClearNpadSystemCommonPolicy |
61 | [10.0.0+] DeactivateNpad |
62 | [10.0.0+] ForceDisconnectNpad |
91 | DeactivateGesture |
110 | DeactivateHomeButton |
111 | SetHomeButtonAutoPilotState |
112 | UnsetHomeButtonAutoPilotState |
120 | DeactivateSleepButton |
121 | SetSleepButtonAutoPilotState |
122 | UnsetSleepButtonAutoPilotState |
123 | [1.0.0-9.2.0] DeactivateInputDetector |
130 | DeactivateCaptureButton |
131 | SetCaptureButtonAutoPilotState |
132 | UnsetCaptureButtonAutoPilotState |
133 | [3.0.0+] SetShiftAccelerometerCalibrationValue |
134 | [3.0.0+] GetShiftAccelerometerCalibrationValue |
135 | [3.0.0+] SetShiftGyroscopeCalibrationValue |
136 | [3.0.0+] GetShiftGyroscopeCalibrationValue |
140 | [3.0.0+] DeactivateConsoleSixAxisSensor |
141 | [5.0.0+] GetConsoleSixAxisSensorSamplingFrequency |
142 | [5.0.0+] DeactivateSevenSixAxisSensor |
143 | [5.0.0+] GetConsoleSixAxisSensorCountStates |
144 | [8.0.0+] GetAccelerometerFsr |
145 | [8.0.0+] SetAccelerometerFsr |
146 | [8.0.0+] GetAccelerometerOdr |
147 | [8.0.0+] SetAccelerometerOdr |
148 | [8.0.0+] GetGyroscopeFsr |
149 | [8.0.0+] SetGyroscopeFsr |
150 | [8.0.0+] GetGyroscopeOdr |
151 | [8.0.0+] SetGyroscopeOdr |
152 | [10.0.0+] GetWhoAmI |
201 | ActivateFirmwareUpdate |
202 | DeactivateFirmwareUpdate |
203 | #StartFirmwareUpdate |
204 | GetFirmwareUpdateStage |
205 | #GetFirmwareVersion |
206 | #GetDestinationFirmwareVersion |
207 | #DiscardFirmwareInfoCacheForRevert |
208 | [3.0.0+] StartFirmwareUpdateForRevert |
209 | [3.0.0+] GetAvailableFirmwareVersionForRevert |
210 | [4.0.0+] IsFirmwareUpdatingDevice |
211 | [6.0.0+] StartFirmwareUpdateIndividual |
215 | [6.0.0+] SetUsbFirmwareForceUpdateEnabled |
216 | [6.0.0+] SetAllKuinaDevicesToFirmwareUpdateMode |
221 | [3.0.0+] #UpdateControllerColor |
222 | [4.0.0+] ConnectUsbPadsAsync |
223 | [4.0.0+] DisconnectUsbPadsAsync |
224 | [5.0.0+] #UpdateDesignInfo |
225 | [5.0.0+] #GetUniquePadDriverState |
226 | [5.0.0+] #GetSixAxisSensorDriverStates |
227 | [5.0.0+] GetRxPacketHistory |
228 | [6.0.0+] #AcquireOperationEventHandle |
229 | [6.0.0+] #ReadSerialFlash |
230 | [6.0.0+] #WriteSerialFlash |
231 | [6.0.0+] #GetOperationResult |
232 | [6.0.0+] EnableShipmentMode |
233 | [6.0.0+] ClearPairingInfo |
234 | [6.0.0+] #GetUniquePadDeviceTypeSetInternal |
235 | [7.0.0+] EnableAnalogStickPower |
236 | [9.0.0+] RequestKuinaUartClockCal |
237 | [9.0.0+] GetKuinaUartClockCal |
238 | [9.0.0+] SetKuinaUartClockTrim |
239 | [9.0.0+] KuinaLoopbackTest |
240 | [9.0.0+] RequestBatteryVoltage |
241 | [9.0.0+] GetBatteryVoltage |
242 | [9.0.0+] GetUniquePadPowerInfo |
243 | [9.0.0+] RebootUniquePad |
244 | [9.0.0+] RequestKuinaFirmwareVersion |
245 | [9.0.0+] GetKuinaFirmwareVersion |
246 | [9.0.0+] GetVidPid |
301 | [5.0.0-8.1.0] #GetAbstractedPadHandles |
302 | [5.0.0-8.1.0] #GetAbstractedPadState |
303 | [5.0.0-8.1.0] #GetAbstractedPadsState |
321 | [5.0.0-8.1.0] #SetAutoPilotVirtualPadState |
322 | [5.0.0-8.1.0] #UnsetAutoPilotVirtualPadState |
323 | [5.0.0+] #UnsetAllAutoPilotVirtualPadState |
324 | [7.0.0+] #AttachHdlsWorkBuffer |
325 | [7.0.0+] #ReleaseHdlsWorkBuffer |
326 | [7.0.0+] #DumpHdlsNpadAssignmentState |
327 | [7.0.0+] #DumpHdlsStates |
328 | [7.0.0+] #ApplyHdlsNpadAssignmentState |
329 | [7.0.0+] #ApplyHdlsStateList |
330 | [7.0.0+] #AttachHdlsVirtualDevice |
331 | [7.0.0+] #DetachHdlsVirtualDevice |
332 | [7.0.0+] #SetHdlsState |
350 | [5.0.0+] AddRegisteredDevice |
400 | [6.0.0+] DisableExternalMcuOnNxDevice |
401 | [6.0.0+] DisableRailDeviceFiltering |
402 | [10.0.0+] EnableWiredPairing |
403 | [10.0.0+] EnableShipmentModeAutoClear |
500 | [8.0.0+] SetFactoryInt |
501 | [8.0.0+] IsFactoryBootEnabled |
550 | [9.0.0+] SetAnalogStickModelDataTemporarily |
551 | [9.0.0+] GetAnalogStickModelData |
552 | [9.0.0+] ResetAnalogStickModelData |
600 | [10.0.0+] ConvertPadState |
2000 | [10.0.0+] DeactivateDigitizer |
2001 | [10.0.0+] SetDigitizerAutoPilotState |
2002 | [10.0.0+] UnsetDigitizerAutoPilotState |
StartFirmwareUpdate
Takes a total of 0x20-bytes of input, 2 handles, and returns an output handle.
[3.0.0+] Now takes a total of 8-bytes of input, and no longer uses any input/output handles.
GetFirmwareVersion
Takes a total of 8-bytes of input, and returns a total of 4-bytes of output.
[3.0.0+] Now returns an additional 0xC-bytes of output.
GetDestinationFirmwareVersion
Takes a total of 8-bytes of input, and returns a total of 4-bytes of output.
[3.0.0+] Now returns an additional 0xC-bytes of output.
DiscardFirmwareInfoCacheForRevert
Takes a total of 8-bytes of input, and returns a total of 5-bytes of output.
[3.0.0+] No input/output.
UpdateControllerColor
Takes two input u32s for the colors, an #UniquePadId, and no output.
A state flag must be clear, otherwise an error is thrown. Afterwards, this flag is set.
Sends the spi-write subcommand to the specified controller, for writing the color data. This writes to offset 0x6050 size 0x6, where the first 3-bytes are from the first u32 and the remaining 3-bytes are from the second u32.
UpdateDesignInfo
Takes 4 input u32s for the colors, an input u8, an input #UniquePadId, and no output.
A state flag must be clear (same as #UpdateControllerColor), otherwise an error is thrown. Afterwards, this flag is set.
Sends the spi-write subcommand to the specified controller, for writing to offset 0x6050 size 0xD. The first 3-bytes from each u32 is used for the spi-write-data, with the u8 being copied immediately afterwards the color data.
GetUniquePadDriverState
Takes a total of 8-bytes of input, returns a total of 0x20-bytes of output.
[9.0.0+] Now takes a total of 8-bytes of input, returns a total of 0x18-bytes of output.
GetSixAxisSensorDriverStates
Takes a total of 8-bytes of input and a type-0xA output buffer, returns a total of 8-bytes of output.
[9.0.0+] Now takes a total of 8-bytes of input and a type-0x6 output buffer, returns a total of 8-bytes of output.
AcquireOperationEventHandle
Takes an input #UniquePadId, returns an output Event handle. The EventClearMode used by official sw is user-specified.
This is not used internally by sdk-nso besides exposing it to the user. With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
This must be used before #ReadSerialFlash/#WriteSerialFlash. Afterwards, this Event is used to wait for the async operation started by #ReadSerialFlash/#WriteSerialFlash to finish. After waiting on the Event, #GetOperationResult should be used.
ReadSerialFlash
Takes an input TransferMemory handle, an input u32 offset, an input u64 size, and an #UniquePadId, no output.
Reads from the specified controller's spi-flash. The input size is the original size without page-alignment. The TransferMemory permissions is RW-.
See also #AcquireOperationEventHandle.
With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
WriteSerialFlash
Takes an input TransferMemory handle, an input u32 offset, an input u64 tmem_size, an input u64 size, and an #UniquePadId, no output.
Writes to the specified controller's spi-flash. The TransferMemory permissions is R--.
See also #AcquireOperationEventHandle.
With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
GetOperationResult
Takes an input #UniquePadId, no output.
Get the Result for the Operation and handles cleanup, for the specified controller.
This is not used internally by sdk-nso besides exposing it to the user. With the sdk-nso for [9.0.0+] the wrapper funcs for this was removed (sdk-nso still has the actual cmd).
GetUniquePadDeviceTypeSetInternal
Takes an input #UniquePadId, returns an #DeviceTypeInternal.
GetAbstractedPadHandles
Takes a type-0xA output buffer containing an array of u64 AbstractedPadHandle and returns an output s32 for total entries.
Returns a handle for each controller detected by the system.
GetAbstractedPadState
Takes an input u64 AbstractedPadHandle, returns an output #AbstractedPadState.
GetAbstractedPadsState
Takes a type-0xA output buffer containing an array of u64 AbstractedPadHandle, a type-0x22 output buffer containing an array of #AbstractedPadState, and returns an output s32 for total entries.
SetAutoPilotVirtualPadState
Takes an input s8 AbstractedVirtualPadId and an input #AbstractedPadState, no output.
UnsetAutoPilotVirtualPadState
Takes an input s8 AbstractedVirtualPadId, no output.
Clears AutoPilot state for the specified pad.
UnsetAllAutoPilotVirtualPadState
No input/output.
Same as #UnsetAutoPilotVirtualPadState except this clears state for every pad.
AttachHdlsWorkBuffer
Takes an input TransferMemory handle and an u64 for the TransferMemory size, no output.
Official user-processes use TransferMemory size=0x1000 and permissions=RW.
This TransferMemory is used as input/output by the other Hdls commands.
Hdls is for virtual HID controllers.
ReleaseHdlsWorkBuffer
No input/output.
DumpHdlsNpadAssignmentState
No input/output.
After using this cmd, the output #HdlsNpadAssignment is located at tmem+0.
DumpHdlsStates
No input/output.
After using this cmd, the output #HdlsStateList struct is located at tmem+0.
ApplyHdlsNpadAssignmentState
Takes an input u8 bool, no output.
Prior to using this cmd, the input #HdlsNpadAssignment is written to tmem+0 by the user-process.
ApplyHdlsStateList
No input/output.
Prior to using this cmd, the input #HdlsStateList is written to tmem+0 by the user-process.
The #HdlsState will be applied for each HdlsHandle. If a HdlsHandle is not found, code similar to #AttachHdlsVirtualDevice will run with the #HdlsDeviceInfo, then it will continue with applying state with the new device.
AttachHdlsVirtualDevice
Takes an #HdlsDeviceInfo, returns a 8-byte HdlsHandle.
DetachHdlsVirtualDevice
Takes an input 8-byte HdlsHandle, no output.
SetHdlsState
Takes an input #HdlsState and an input 8-byte HdlsHandle, no output.
[9.0.0+] Input order was swapped: now takes an input 8-byte HdlsHandle and a #HdlsState, no output.
hid:sys
This is "nn::hid::IHidSystemServer".
Cmd | Name |
---|---|
31 | SendKeyboardLockKeyEvent |
101 | AcquireHomeButtonEventHandle |
111 | ActivateHomeButton |
121 | AcquireSleepButtonEventHandle |
131 | ActivateSleepButton |
141 | AcquireCaptureButtonEventHandle |
151 | ActivateCaptureButton |
161 | [7.0.0+] GetPlatformConfig |
210 | AcquireNfcDeviceUpdateEventHandle |
211 | GetNpadsWithNfc |
212 | AcquireNfcActivateEventHandle |
213 | ActivateNfc |
214 | [4.0.0+] GetXcdHandleForNpadWithNfc |
215 | [4.0.0+] IsNfcActivated |
230 | AcquireIrSensorEventHandle |
231 | ActivateIrSensor |
232 | [10.0.0+] GetIrSensorState |
233 | [10.0.0+] GetXcdHandleForNpadWithIrSensor |
301 | ActivateNpadSystem |
303 | ApplyNpadSystemCommonPolicy |
304 | EnableAssigningSingleOnSlSrPress |
305 | DisableAssigningSingleOnSlSrPress |
306 | GetLastActiveNpad |
307 | GetNpadSystemExtStyle |
308 | [5.0.0+] ApplyNpadSystemCommonPolicyFull |
309 | [5.0.0+] GetNpadFullKeyGripColor |
310 | [6.0.0+] #GetMaskedSupportedNpadStyleSet |
311 | SetNpadPlayerLedBlinkingDevice |
312 | [6.0.0+] SetSupportedNpadStyleSetAll |
313 | [9.0.0+] GetNpadCaptureButtonAssignment |
314 | [9.0.0+] GetAppletFooterUiType |
315 | [9.0.0+] GetAppletDetailedUiType |
316 | [10.0.0+] GetNpadInterfaceType |
317 | [10.0.0+] GetNpadLeftRightInterfaceType |
318 | [10.0.0+] HasBattery |
319 | [10.0.0+] HasLeftRightBattery |
321 | [3.0.0+] #GetUniquePadsFromNpad |
322 | [10.0.0+] SetNpadSystemExtStateEnabled ([1.0.0-9.2.0] GetIrSensorState) |
323 | [10.0.0+] GetLastActiveUniquePad ([1.0.0-9.2.0] GetXcdHandleForNpadWithIrSensor) |
324 | [10.0.0+] GetUniquePadButtonSet |
325 | [10.0.0+] GetUniquePadColor |
326 | [10.0.0+] GetUniquePadAppletDetailedUiType |
500 | SetAppletResourceUserId |
501 | RegisterAppletResourceUserId |
502 | UnregisterAppletResourceUserId |
503 | EnableAppletToGetInput |
504 | SetAruidValidForVibration |
505 | EnableAppletToGetSixAxisSensor |
510 | #SetVibrationMasterVolume |
511 | GetVibrationMasterVolume |
512 | [3.0.0+] BeginPermitVibrationSession |
513 | [3.0.0+] EndPermitVibrationSession |
520 | EnableHandheldHids |
521 | DisableHandheldHids |
522 | [9.0.0+] SetJoyConRailEnabled |
523 | [9.0.0+] IsJoyConRailEnabled |
524 | [10.0.0+] IsHandheldHidsEnabled |
540 | AcquirePlayReportControllerUsageUpdateEvent |
541 | GetPlayReportControllerUsages |
542 | AcquirePlayReportRegisteredDeviceUpdateEvent |
543 | GetRegisteredDevicesOld ([1.0.0-4.1.0] GetRegisteredDevices) |
544 | [3.0.0+] AcquireConnectionTriggerTimeoutEvent |
545 | [3.0.0+] SendConnectionTrigger |
546 | [3.0.0+] AcquireDeviceRegisteredEventForControllerSupport |
547 | [3.0.0+] GetAllowedBluetoothLinksCount |
548 | [5.0.0+] GetRegisteredDevices |
549 | [6.0.0+] GetConnectableRegisteredDevices |
700 | ActivateUniquePad |
702 | AcquireUniquePadConnectionEventHandle |
703 | #GetUniquePadIds |
751 | AcquireJoyDetachOnBluetoothOffEventHandle |
800 | ListSixAxisSensorHandles |
801 | IsSixAxisSensorUserCalibrationSupported |
802 | ResetSixAxisSensorCalibrationValues |
803 | StartSixAxisSensorUserCalibration |
804 | CancelSixAxisSensorUserCalibration |
805 | [3.0.0+] GetUniquePadBluetoothAddress |
806 | [3.0.0+] DisconnectUniquePad |
807 | [5.0.0+] #GetUniquePadType |
808 | [5.0.0+] GetUniquePadInterface |
809 | [5.0.0+] GetUniquePadSerialNumber |
810 | [5.0.0+] GetUniquePadControllerNumber |
811 | [5.0.0+] GetSixAxisSensorUserCalibrationStage |
812 | [8.0.0+] GetConsoleUniqueSixAxisSensorHandle |
821 | StartAnalogStickManualCalibration |
822 | RetryCurrentAnalogStickManualCalibrationStage |
823 | CancelAnalogStickManualCalibration |
824 | ResetAnalogStickManualCalibration |
825 | [5.0.0+] GetAnalogStickState |
826 | [5.0.0+] GetAnalogStickManualCalibrationStage |
827 | [5.0.0+] IsAnalogStickButtonPressed |
828 | [5.0.0+] IsAnalogStickInReleasePosition |
829 | [5.0.0+] IsAnalogStickInCircumference |
830 | [7.0.0+] #SetNotificationLedPattern |
831 | [9.0.0+] #SetNotificationLedPatternWithTimeout |
832 | [9.0.0+] #PrepareHidsForNotificationWake |
850 | [3.0.0+] IsUsbFullKeyControllerEnabled |
851 | [3.0.0+] EnableUsbFullKeyController |
852 | [3.0.0+] IsUsbConnected |
870 | [5.1.0+] IsHandheldButtonPressedOnConsoleMode |
900 | [1.0.0-9.2.0] ActivateInputDetector |
901 | [1.0.0-9.2.0] #NotifyInputDetector |
1000 | [3.0.0+] InitializeFirmwareUpdate |
1001 | [3.0.0+] GetFirmwareVersion |
1002 | [3.0.0+] GetAvailableFirmwareVersion |
1003 | [3.0.0+] IsFirmwareUpdateAvailable |
1004 | [3.0.0+] CheckFirmwareUpdateRequired |
1005 | [3.0.0+] StartFirmwareUpdate |
1006 | [3.0.0+] AbortFirmwareUpdate |
1007 | [3.0.0+] GetFirmwareUpdateState |
1008 | [4.0.0+] ActivateAudioControl |
1009 | [4.0.0+] AcquireAudioControlEventHandle |
1010 | [4.0.0+] GetAudioControlStates |
1011 | [4.0.0+] DeactivateAudioControl |
1050 | [5.0.0+] IsSixAxisSensorAccurateUserCalibrationSupported |
1051 | [5.0.0+] StartSixAxisSensorAccurateUserCalibration |
1052 | [5.0.0+] CancelSixAxisSensorAccurateUserCalibration |
1053 | [5.0.0+] GetSixAxisSensorAccurateUserCalibrationState |
1100 | [5.0.0+] #GetHidbusSystemServiceObject |
1120 | [6.0.0+] SetFirmwareHotfixUpdateSkipEnabled |
1130 | [6.0.0+] InitializeUsbFirmwareUpdate |
1131 | [6.0.0+] FinalizeUsbFirmwareUpdate |
1132 | [6.0.0+] CheckUsbFirmwareUpdateRequired |
1133 | [6.0.0+] StartUsbFirmwareUpdate |
1134 | [6.0.0+] GetUsbFirmwareUpdateState |
1150 | [8.0.0+] SetTouchScreenMagnification |
1151 | [9.0.0+] GetTouchScreenFirmwareVersion |
1152 | [9.0.0+] SetTouchScreenDefaultConfiguration |
1153 | [9.0.0+] GetTouchScreenDefaultConfiguration |
1154 | [9.0.0+] IsFirmwareAvailableForNotification |
1155 | [9.0.0+] SetForceHandheldStyleVibration |
1156 | [9.0.0+] SendConnectionTriggerWithoutTimeoutEvent |
1157 | [10.0.0+] #CancelConnectionTrigger |
1200 | [10.0.0+] #IsButtonConfigSupported |
1201 | [10.0.0+] #DeleteButtonConfig |
1202 | [10.0.0+] #SetButtonConfigEnabled |
1203 | [10.0.0+] #IsButtonConfigEnabled |
1204 | [10.0.0+] #SetButtonConfigEmbedded |
1205 | [10.0.0+] #SetButtonConfigFull |
1206 | [10.0.0+] #SetButtonConfigLeft |
1207 | [10.0.0+] #SetButtonConfigRight |
1208 | [10.0.0+] #GetButtonConfigEmbedded |
1209 | [10.0.0+] #GetButtonConfigFull |
1210 | [10.0.0+] #GetButtonConfigLeft |
1211 | [10.0.0+] #GetButtonConfigRight |
1250 | [10.0.0+] #IsCustomButtonConfigSupported |
1251 | [10.0.0+] #IsDefaultButtonConfigEmbedded |
1252 | [10.0.0+] #IsDefaultButtonConfigFull |
1253 | [10.0.0+] #IsDefaultButtonConfigLeft |
1254 | [10.0.0+] #IsDefaultButtonConfigRight |
1255 | [10.0.0+] #IsButtonConfigStorageEmbeddedEmpty |
1256 | [10.0.0+] #IsButtonConfigStorageFullEmpty |
1257 | [10.0.0+] #IsButtonConfigStorageLeftEmpty |
1258 | [10.0.0+] #IsButtonConfigStorageRightEmpty |
1259 | [10.0.0+] #GetButtonConfigStorageEmbedded |
1260 | [10.0.0+] #GetButtonConfigStorageFull |
1261 | [10.0.0+] #GetButtonConfigStorageLeft |
1262 | [10.0.0+] #GetButtonConfigStorageRight |
1263 | [10.0.0+] #SetButtonConfigStorageEmbedded |
1264 | [10.0.0+] #SetButtonConfigStorageFull |
1265 | [10.0.0+] #SetButtonConfigStorageLeft |
1266 | [10.0.0+] #SetButtonConfigStorageRight |
1267 | [10.0.0+] #DeleteButtonConfigStorageEmbedded |
1268 | [10.0.0+] #DeleteButtonConfigStorageFull |
1269 | [10.0.0+] #DeleteButtonConfigStorageLeft |
1270 | [10.0.0+] #DeleteButtonConfigStorageRight |
1271 | [10.0.0+] #IsUsingCustomButtonConfig |
1272 | [10.0.0+] #IsAnyCustomButtonConfigEnabled |
1273 | [10.0.0+] #SetAllCustomButtonConfigEnabled |
1274 | [10.0.0+] #SetDefaultButtonConfig |
1275 | [10.0.0+] #SetAllDefaultButtonConfig |
1276 | [10.0.0+] #SetHidButtonConfigEmbedded |
1277 | [10.0.0+] #SetHidButtonConfigFull |
1278 | [10.0.0+] #SetHidButtonConfigLeft |
1279 | [10.0.0+] #SetHidButtonConfigRight |
1280 | [10.0.0+] #GetHidButtonConfigEmbedded |
1281 | [10.0.0+] #GetHidButtonConfigFull |
1282 | [10.0.0+] #GetHidButtonConfigLeft |
1283 | [10.0.0+] #GetHidButtonConfigRight |
GetMaskedSupportedNpadStyleSet
Takes an input u64 AppletResourceUserId, returns an output u32 #NpadStyleTag.
Official sw uses the output from GetAppletResourceUserIdOfCallerApplet with this.
GetUniquePadsFromNpad
Takes an input u32 #NpadIdType, a type-0xA output buffer, and returns an output s64 for total output entries (which is copied to a s32 by official sw).
The output buffer contains an array of #UniquePadId.
SetVibrationMasterVolume
Takes an input 32bit float.
GetUniquePadIds
Takes a type-0xA output buffer, and returns an output s64 for total output entries (which is copied to a s32 by official sw).
The output buffer contains an array of #UniquePadId.
GetUniquePadType
Takes an input #UniquePadId and returns an output u64 #UniquePadType.
SetNotificationLedPattern
Takes an input #NotificationLedPattern and an #UniquePadId, no output.
The specified controller must have a HOME button.
This sends subcommand 0x38 to the specified controller, for setting the pattern for the HOME button notification LED. The input structure is converted to the format used by this subcommand.
[9.0.0+] This runs code similar to #SetNotificationLedPatternWithTimeout, except it passes the following param values to an internal func: flag=1 and TimeSpan=0 (with #SetNotificationLedPatternWithTimeout these are flag=0 and TimeSpan={input value}).
SetNotificationLedPatternWithTimeout
Takes an input #NotificationLedPattern, an #UniquePadId, and an s64 TimeSpan, no output.
PrepareHidsForNotificationWake
Takes a type-0x9 input buffer containing an array of #UniquePadId, no output.
NotifyInputDetector
Takes an input u32 bitmask InputSourceId, no output.
This is the only hid:sys command used by USB-sysmodule (with value 0x40).
GetHidbusSystemServiceObject
No input, returns an #IHidbusSystemServer.
CancelConnectionTrigger
Takes an input "nn::bluetooth::Address", no output.
IsButtonConfigSupported
Takes an input #UniquePadId, returns an output bool.
DeleteButtonConfig
Takes an input #UniquePadId, no output.
SetButtonConfigEnabled
Takes an input bool, an #UniquePadId, no output.
IsButtonConfigEnabled
Takes an input #UniquePadId, returns an output bool.
SetButtonConfigEmbedded
Takes an input #UniquePadId, a type-0x15 input buffer containing a #SystemButtonConfigEmbedded, no output.
SetButtonConfigFull
Takes an input #UniquePadId, a type-0x15 input buffer containing a #SystemButtonConfigFull, no output.
SetButtonConfigLeft
Takes an input #UniquePadId, a type-0x15 input buffer containing a #SystemButtonConfigLeft, no output.
SetButtonConfigRight
Takes an input #UniquePadId, a type-0x15 input buffer containing a #SystemButtonConfigRight, no output.
GetButtonConfigEmbedded
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #SystemButtonConfigEmbedded.
GetButtonConfigFull
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #SystemButtonConfigFull.
GetButtonConfigLeft
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #SystemButtonConfigLeft.
GetButtonConfigRight
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #SystemButtonConfigRight.
IsCustomButtonConfigSupported
Takes an input #UniquePadId, returns an output bool.
IsDefaultButtonConfigEmbedded
Takes a type-0x15 input buffer containing a #ButtonConfigEmbedded, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsDefaultButtonConfigFull
Takes a type-0x15 input buffer containing a #ButtonConfigFull, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsDefaultButtonConfigLeft
Takes a type-0x15 input buffer containing a #ButtonConfigLeft, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsDefaultButtonConfigRight
Takes a type-0x15 input buffer containing a #ButtonConfigRight, returns an output bool.
This compares the input config with config in state, sets the output bool to whether these match, then returns 0.
IsButtonConfigStorageEmbeddedEmpty
Takes an input s32 entry-index, returns an output bool.
[10.1.0+] This will now Abort if the s32 is negative or >=5.
Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. Then the output bool is set to IsFull bit0 == 0. Then 0 is returned.
IsButtonConfigStorageFullEmpty
Takes an input s32 entry-index, returns an output bool.
Same as #IsButtonConfigStorageEmbeddedEmpty except with a different setsys cmd.
IsButtonConfigStorageLeftEmpty
Takes an input s32 entry-index, returns an output bool.
Same as #IsButtonConfigStorageEmbeddedEmpty except with a different setsys cmd.
IsButtonConfigStorageRightEmpty
Takes an input s32 entry-index, returns an output bool.
Same as #IsButtonConfigStorageEmbeddedEmpty except with a different setsys cmd.
GetButtonConfigStorageEmbedded
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigEmbedded.
[10.1.0+] This will now Abort if the s32 is negative or >=5.
Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. Then an error is thrown if IsFull bit0 is clear. Then the data at +0x1C8 is converted to #ButtonConfigEmbedded, copied to output, and returns 0.
GetButtonConfigStorageFull
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigFull.
Same as #GetButtonConfigStorageEmbedded, except this uses a different setsys cmd, and uses a different conversion func / different output struct.
GetButtonConfigStorageLeft
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigLeft.
Same as #GetButtonConfigStorageEmbedded, except this uses a different setsys cmd, and uses a different conversion func / different output struct.
GetButtonConfigStorageRight
Takes an input s32 entry-index, and a type-0x16 output buffer containing a #ButtonConfigRight.
Same as #GetButtonConfigStorageEmbedded, except this uses a different setsys cmd, and uses a different conversion func / different output struct.
SetButtonConfigStorageEmbedded
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigEmbedded.
[10.1.0+] This will now Abort if the s32 is negative or >=5.
If the input config matches the default, this first does:
- Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. When IsFull is set, the config is deleted the same way as #DeleteButtonConfigStorageEmbedded (following the IsFull check).
Afterwards, this uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. The input struct is converted, the output from that is copied to +0x1C8 size 0x3E0, IsFull is set, SetButtonConfigSettingsEmbedded is used with the updated array, and then returns 0.
SetButtonConfigStorageFull
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigFull.
Same as #SetButtonConfigStorageEmbedded, except this uses different setsys cmds, and uses a different structs etc.
SetButtonConfigStorageLeft
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigLeft.
Same as #SetButtonConfigStorageEmbedded, except this uses different setsys cmds, and uses a different structs etc.
SetButtonConfigStorageRight
Takes an input s32 entry-index, and a type-0x15 input buffer containing a #ButtonConfigRight.
Same as #SetButtonConfigStorageEmbedded, except this uses different setsys cmds, and uses a different structs etc.
DeleteButtonConfigStorageEmbedded
Takes an input s32 entry-index, no output.
[10.1.0+] This will now Abort if the s32 is negative or >=5.
Uses GetButtonConfigSettingsEmbedded with count=5 (output s32 ignored). The input entry-index is used with this array. Then an error is thrown if IsFull bit0 is clear. Then the data at +0x1C8 size 0x3E0 is cleared, IsFull bit0 is cleared, SetButtonConfigSettingsEmbedded is used with the updated array, and then returns 0.
DeleteButtonConfigStorageFull
Takes an input s32 entry-index, no output.
Same as #IsButtonConfigStorageEmbeddedEmpty except with different setsys cmds.
DeleteButtonConfigStorageLeft
Takes an input s32 entry-index, no output.
Same as #IsButtonConfigStorageEmbeddedEmpty except with different setsys cmds.
DeleteButtonConfigStorageRight
Takes an input s32 entry-index, no output.
Same as #IsButtonConfigStorageEmbeddedEmpty except with different setsys cmds.
IsUsingCustomButtonConfig
Takes an input #UniquePadId, returns an output bool.
IsAnyCustomButtonConfigEnabled
No input, returns an output bool.
SetAllCustomButtonConfigEnabled
Takes an input bool and an AppletResourceUserId, no output.
SetDefaultButtonConfig
Takes an input #UniquePadId, no output.
SetAllDefaultButtonConfig
No input/output.
SetHidButtonConfigEmbedded
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigEmbedded, no output.
SetHidButtonConfigFull
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigFull, no output.
SetHidButtonConfigLeft
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigLeft, no output.
SetHidButtonConfigRight
Takes an input #UniquePadId and a type-0x15 input buffer containing a #ButtonConfigRight, no output.
GetHidButtonConfigEmbedded
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigEmbedded.
GetHidButtonConfigFull
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigFull.
GetHidButtonConfigLeft
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigLeft.
GetHidButtonConfigRight
Takes an input #UniquePadId, and a type-0x16 output buffer containing a #ButtonConfigRight.
IHidbusSystemServer
This is "nn::hidbus::IHidbusSystemServer".
This was added with [5.0.0+].
Cmd | Name |
---|---|
500 | SetAppletResourceUserId |
501 | RegisterAppletResourceUserId |
502 | UnregisterAppletResourceUserId |
hid:tmp
This is "nn::hid::IHidTemporaryServer".
This service was added with [3.0.0+], then removed with [8.0.0+].
Cmd | Name |
---|---|
0 | GetConsoleSixAxisSensorCalibrationValues |
irs
This is "nn::irsensor::IIrSensorServer".
This was added to sdknso with 3.x.
With sdknso versions pre-4.x PointingProcessor used to be DpdProcessor. The packed-config with DpdProcessor (besides RequiredMcuVersion) used to be initialized from user-specified config, now it's hard-coded.
Cmd | Name |
---|---|
302 | #ActivateIrsensor |
303 | #DeactivateIrsensor |
304 | #GetIrsensorSharedMemoryHandle |
305 | #StopImageProcessor |
306 | #RunMomentProcessor |
307 | #RunClusteringProcessor |
308 | #RunImageTransferProcessor |
309 | #GetImageTransferProcessorState |
310 | #RunTeraPluginProcessor |
311 | #GetNpadIrCameraHandle |
312 | #RunPointingProcessor |
313 | #SuspendImageProcessor |
314 | [3.0.0+] #CheckFirmwareVersion |
315 | [4.0.0+] #SetFunctionLevel |
316 | [4.0.0+] #RunImageTransferExProcessor |
317 | [4.0.0+] #RunIrLedProcessor |
318 | [4.0.0+] #StopImageProcessorAsync |
319 | [4.0.0+] #ActivateIrsensorWithFunctionLevel |
ActivateIrsensor
Takes a PID-descriptor and an AppletResourceUserId. No output.
DeactivateIrsensor
Takes a PID-descriptor and an AppletResourceUserId. No output.
Takes a PID-descriptor and an AppletResourceUserId. Returns a SharedMemory handle.
The SharedMemory is "nn::irsensor::detail::StatusManager". It's mapped with permission read-only and size 0x8000.
It's structure is as follows:
Offset | Size | Description |
---|---|---|
0x0 | 0x7FB0 | Array of #DeviceFormat |
0x7FB0 | 0x50 | Array of #AruidFormat |
The array of #DeviceFormat is indexed by PlayerNumber and can hold up to 9 entries. The array of #AruidFormat can only hold up to 5 entries.
DeviceFormat
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #IrCameraStatus |
0x4 | 0x4 | #IrCameraInternalStatus |
0x8 | 0x8 | #IrSensorMode |
0x10 | 0xE20 | #ProcessorStateRingLifo |
ProcessorStateRingLifo
This is "nn::irsensor::detail::RingLifo<X,Y>" where "X" is a specialized processor state (e.g.: "nn::irsensor::MomentProcessorState") and "Y" is the maximum element count (e.g.: 5).
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Start |
0x8 | 0x4 | Count |
0xC | 0x4 | Padding |
0x10 | Variable | ProcessorState |
The maximum element count is 6 for #PointingProcessorMarkerState or 5 for any of the other states.
ProcessorState is specialized depending on the value of #IrSensorMode.
MomentProcessorState
This is "nn::irsensor::MomentProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | AmbientNoiseLevel |
0x14 | 0x4 | Reserved |
0x18 | 0x240 | Array of #MomentStatistic |
The array of #MomentStatistic can hold up to 48 entries. This array can be accessed as [y + x*8] (this is a 6x8 array). region_x = image_x/6, region_y = image_y/8.
MomentStatistic
In sdknso GetMomentProcessorStates, this loops through each MomentProcessorState->MomentStatistic entry: AverageIntensity *= scale;
The scale is calculated with: scale = 76800.0f / (float)(WindowOfInterest.width * WindowOfInterest.height);
Note that 76800 == 320*240
, hence with the default width/height the calculated scale is 1.0f.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | float AverageIntensity |
0x4 | 0x4 | float CentroidX |
0x8 | 0x4 | float CentroidY |
ClusteringProcessorState
This is "nn::irsensor::ClusteringProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x1 | ObjectCount |
0x11 | 0x3 | Reserved |
0x14 | 0x4 | AmbientNoiseLevel |
0x18 | 0x180 | Array of #ClusteringData |
The array of #ClusteringData can hold up to 16 entries.
ClusteringData
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | float AverageIntensity |
0x4 | 0x4 | float CentroidX |
0x8 | 0x4 | float CentroidY |
0xC | 0x4 | PixelCount |
0x10 | 0x2 | BoundX |
0x12 | 0x2 | BoundY |
0x14 | 0x2 | BoundtWidth |
0x16 | 0x2 | BoundHeight |
PointingProcessorMarkerState
This is "nn::irsensor::PointingProcessorMarkerState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x1 | PointingStatus |
0x11 | 0x3 | Reserved |
0x14 | 0x4 | Unknown |
0x18 | 0x4 | float Unknown |
0x1C | 0x4 | float PositionX |
0x20 | 0x4 | float PositionY |
0x24 | 0x4 | float Unknown |
0x28 | 0x2 | WindowOfInterestX |
0x2A | 0x2 | WindowOfInterestY |
0x2C | 0x2 | WindowOfInterestWidth |
0x2E | 0x2 | WindowOfInterestHeight |
0x30 | 0x1 | PointingStatus |
0x31 | 0x3 | Reserved |
0x34 | 0x4 | Unknown |
0x38 | 0x4 | float Unknown |
0x3C | 0x4 | float PositionX |
0x40 | 0x4 | float PositionY |
0x44 | 0x4 | float Unknown |
0x48 | 0x2 | WindowOfInterestX |
0x4A | 0x2 | WindowOfInterestY |
0x4C | 0x2 | WindowOfInterestWidth |
0x4E | 0x2 | WindowOfInterestHeight |
0x50 | 0x1 | PointingStatus |
0x51 | 0x3 | Reserved |
0x54 | 0x4 | Unknown |
0x58 | 0x4 | float Unknown |
0x5C | 0x4 | float PositionX |
0x60 | 0x4 | float PositionY |
0x64 | 0x4 | float Unknown |
0x68 | 0x2 | WindowOfInterestX |
0x6A | 0x2 | WindowOfInterestY |
0x6C | 0x2 | WindowOfInterestWidth |
0x6E | 0x2 | WindowOfInterestHeight |
PointingProcessorState
This is "nn::irsensor::PointingProcessorState".
This is created from #PointingProcessorMarkerState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | PointingStatus |
0x14 | 0x4 | float PositionX |
0x18 | 0x4 | float PositionY |
0x1C | 0x4 | Reserved |
TeraPluginProcessorState
This is "nn::irsensor::TeraPluginProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | AmbientNoiseLevel |
0x14 | 0x12C | PluginData |
AdaptiveClusteringProcessorState
This is "nn::irsensor::AdaptiveClusteringProcessorState".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x8 | TimeStamp |
0x10 | 0x4 | AmbientNoiseLevel |
0x14 | 0x4 | AccuracyLevel |
0x18 | 0x1 | ObjectCount |
0x19 | 0x1 | BackgroundIntensity |
0x1A | 0x6 | Reserved |
0x20 | 0x200 | Array of #AdaptiveClusteringData |
The array of #AdaptiveClusteringData can hold up to 16 entries.
AdaptiveClusteringData
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | float CentroidX |
0x4 | 0x4 | float CentroidY |
0x8 | 0x4 | float Area |
0xC | 0x4 | IsIncomplete |
HandAnalysisImageState
This is "nn::irsensor::HandAnalysisImageState".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x960 | Image |
0x96C | 0x4 | Reserved |
HandAnalysisSilhouetteState
This is "nn::irsensor::HandAnalysisSilhouetteState".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x1354 | Unknown |
HandAnalysisSilhouetteStateWithFullFrameShape
This is "nn::irsensor::HandAnalysisSilhouetteStateWithFullFrameShape".
This is created from #TeraPluginProcessorState.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x156C | Unknown |
AruidFormat
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | IrSensorAruid |
0x8 | 0x8 | IrSensorAruidStatus |
StopImageProcessor
Takes a PID-descriptor, an #IrCameraHandle, and an AppletResourceUserId. No output.
RunMomentProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, and a #PackedMomentProcessorConfig. No output.
RunClusteringProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, and a #PackedClusteringProcessorConfig. No output.
RunImageTransferProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, a #PackedImageTransferProcessorConfig, an u64 for the TransferMemory's size, and a TransferMemory handle. No output.
The TransferMemory is created with an user specified buffer and permission none.
GetImageTransferProcessorState
Takes a PID-descriptor, a type-0x6 output buffer, an #IrCameraHandle, and an AppletResourceUserId. Returns an #ImageTransferProcessorState. No output.
RunTeraPluginProcessor
Takes a PID-descriptor, an #IrCameraHandle, a #PackedTeraPluginProcessorConfig (immediately after the previous word), and an AppletResourceUserId. No output.
GetNpadIrCameraHandle
Takes an input #NpadIdType. Returns an output #IrCameraHandle.
RunPointingProcessor
Takes a PID-descriptor, an #IrCameraHandle, a #PackedPointingProcessorConfig (immediately after the previous word), and an AppletResourceUserId. No output.
SuspendImageProcessor
Takes a PID-descriptor, an #IrCameraHandle, and an AppletResourceUserId. No output.
sdknso uses this from the Run*Processor funcs to suspend the current Processor when the current FunctionLevel is >= 0x1, prior to starting another Processor if needed (depending on what Processor was already active via a state field). Hence, this cmd is only used with [4.0.0+].
CheckFirmwareVersion
Takes a PID-descriptor, an #IrCameraHandle, a #PackedMcuVersion, and an AppletResourceUserId. No output.
sdknso didn't actually use this until 4.x (the RequiredMcuVersion was also updated with that version).
SetFunctionLevel
Takes a PID-descriptor, an #IrCameraHandle, a #PackedFunctionLevel, and an AppletResourceUserId. No output.
RunImageTransferExProcessor
Takes a PID-descriptor, an #IrCameraHandle, an AppletResourceUserId, a #PackedImageTransferProcessorExConfig, an u64 for the TransferMemory's size, and a TransferMemory handle. No output.
The TransferMemory is created with an user specified buffer and permission none.
RunIrLedProcessor
Takes a PID-descriptor, an #IrCameraHandle, a #PackedIrLedProcessorConfig (immediately after the previous word), and an AppletResourceUserId. No output.
StopImageProcessorAsync
Takes a PID-descriptor, an #IrCameraHandle, and an AppletResourceUserId. No output.
ActivateIrsensorWithFunctionLevel
Takes a PID-descriptor, an #PackedFunctionLevel, and an AppletResourceUserId. No output.
irs:sys
This is "nn::irsensor::IIrSensorSystemServer".
Cmd | Name |
---|---|
500 | #SetAppletResourceUserId |
501 | #RegisterAppletResourceUserId |
502 | #UnregisterAppletResourceUserId |
503 | #EnableAppletToGetInput |
SetAppletResourceUserId
Takes an AppletResourceUserId. No output.
RegisterAppletResourceUserId
Takes a bool and an AppletResourceUserId. No output.
UnregisterAppletResourceUserId
Takes an AppletResourceUserId. No output.
EnableAppletToGetInput
Takes a bool and an AppletResourceUserId. No output.
ahid:cd
This is "nn::ahid::IServerSession".
Used for USB HID devices.
This service no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | #AcquireDevice |
1 | #ReleaseDevice |
2 | #GetCtrlSession |
3 | #GetReadSession |
4 | [1.0.0-2.3.0] #GetWriteSession |
AcquireDevice
Takes an input s32, no output.
ReleaseDevice
Takes an input s32, no output.
GetCtrlSession
Takes an input u32, returns an #ICtrlSession.
GetReadSession
Takes an input u32, returns an #IReadSession.
GetWriteSession
Takes an input u32, returns an #IWriteSession.
ICtrlSession
This is "nn::ahid::ICtrlSession".
This no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | GetString |
1 | GetCodeBook |
2 | GetReport |
3 | SetReport |
4 | GetIdle |
5 | SetIdle |
6 | GetProtocol |
7 | SetProtocol |
8 | GetDescriptor |
9 | SetDescriptor |
10 | GetStateChangeEvent |
11 | SignalStateChangeEvent |
12 | [3.0.0+] Write |
All of these use USB CtrlXfer, except for GetStateChangeEvent and SignalStateChangeEvent, and GetCodeBook which copies 0x4000-bytes from state to output.
IReadSession
This is "nn::ahid::IReadSession".
This no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | #Read |
Read
Uses PostBufferAsync etc with the INPUT endpoint. The size must be <=0x1000. The actual transfer size is returned in an output u64. The data is copied from the tmpbuf to the output buffer using the actual-transfer-size.
[3.0.0+] Now takes a total of 8-bytes of input.
IWriteSession
This is "nn::ahid::IWriteSession".
This was removed with [3.0.0+].
Cmd | Name |
---|---|
0 | #Write |
Write
This is the inverse of #IReadSession cmd0. Uses the OUTPUT endpoint with an input buffer.
ahid:hdr
This is "nn::ahid::hdr::ISession".
Used internally for USB HID devices.
This service no longer exists in [9.0.0+].
Cmd | Name |
---|---|
0 | GetDeviceEntries |
1 | GetDeviceList |
2 | GetDeviceParameters |
3 | AttachDevice |
4 | DetachDevice |
5 | [6.0.0+] SetDeviceFilter |
xcd:sys
This is "nn::xcd::detail::ISystemServer".
Cmd | Name |
---|---|
0 | GetDataFormat |
1 | SetDataFormat |
2 | GetMcuState |
3 | SetMcuState |
4 | GetMcuVersionForNfc |
5 | CheckNfcDevicePower |
6 | [5.0.0+] SetMcuStateImmediate |
10 | SetNfcEvent |
11 | GetNfcInfo |
12 | StartNfcDiscovery |
13 | StopNfcDiscovery |
14 | StartNtagRead |
15 | StartNtagWrite |
16 | SendNfcRawData |
17 | RegisterMifareKey |
18 | ClearMifareKey |
19 | StartMifareRead |
20 | StartMifareWrite |
101 | GetAwakeTriggerReasonForLeftRail |
102 | GetAwakeTriggerReasonForRightRail |
103 | [10.0.0+] GetAwakeTriggerBatteryLevelTransitionForLeftRail |
104 | [10.0.0+] GetAwakeTriggerBatteryLevelTransitionForRightRail |
[5.0.0+] SetDataFormat, SetMcuState, and ClearMifareKey: now takes a total of 0xC-bytes of input instead of 0x10.
[6.0.0+]: The buffer type used by GetNfcInfo is now 0x32 instead of 0x1A.
hidbus
This is "nn::hidbus::IHidbusServer".
This was added with [5.0.0+].
Official sw opens a temporary service-session for each func using this, with it being closed once done: no global session is kept open.
Cmd | Name |
---|---|
1 | #GetBusHandle |
2 | #IsExternalDeviceConnected |
3 | #Initialize |
4 | #Finalize |
5 | #EnableExternalDevice |
6 | #GetExternalDeviceId |
7 | #SendCommandAsync |
8 | #GetSendCommandAsynceResult |
9 | #SetEventForSendCommandAsycResult |
10 | #GetSharedMemoryHandle |
11 | #EnableJoyPollingReceiveMode |
12 | #DisableJoyPollingReceiveMode |
13 | [5.0.0-6.2.0] GetPollingData |
14 | [6.0.0+] #SetStatusManagerType |
sdknso doesn't use the GetPollingData cmd.
GetBusHandle
Takes an input u32 #NpadIdType, an u64 #BusType, an u64 AppletResourceUserId, returns an output u8 bool and a #BusHandle.
The bool indicates whether the #BusHandle is valid.
Official sw will assert when #BusHandle InternalIndex is >=0x11 (>=0x13 with [6.0.0+]). This same check is also done for all funcs using #BusHandle as input.
This cmd will throw an error when #BusType is invalid.
IsExternalDeviceConnected
Takes an input #BusHandle, returns an output u8 bool.
This is not used by sdknso.
Initialize
Takes an input #BusHandle, an u64 AppletResourceUserId, no output.
Prior to using this cmd, sdknso handles sharedmem mapping if not done previously.
Finalize
Takes an input #BusHandle, an u64 AppletResourceUserId, no output.
EnableExternalDevice
Takes an input u8 bool, a #BusHandle, an u64, an u64 AppletResourceUserId, no output.
sdknso passes value 0x38900050018 (0x3A600050018 with 7.x+) for the u64.
The bool flag indicates whether to enable the device (true = enable, false = disable). When false, this will use #DisableJoyPollingReceiveMode if needed.
GetExternalDeviceId
Takes an input #BusHandle, returns an output u32 ExternalDeviceId.
SendCommandAsync
Takes a type-0x21 input buffer and a #BusHandle, no output.
GetSendCommandAsynceResult
Takes a type-0x22 output buffer and a #BusHandle, returns an output u32.
Official sw copies the u32 to an output u64, for the actual output size.
SetEventForSendCommandAsycResult
Takes an input #BusHandle, returns an output Event handle with EventClearMode=0.
Official sw with SendAndReceive clears this event (6.x+ sdknso), uses #SendCommandAsync, waits on + clears this event, then uses #GetSendCommandAsynceResult.
No input, returns an output SharedMemory handle.
The SharedMemory is mapped with size 0x1000 and permissions=R--.
See also #SetStatusManagerType.
This sharedmem is the StatusManager. This sharedmem contains an array of 0x100-byte (0x80-byte with [6.0.0+]) entries, with entry-count {max BusHandles}.
sdknso only uses the first 0x10-bytes of these entries, the rest is the ignored. Entry structure:
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | Bool flag |
0x1 | 0x3 | Padding |
0x4 | 0x4 | Result |
0x8 | 0x1 | DeviceEnabled. Bool flag indicating whether a device is enabled. |
0x9 | 0x1 | IsValid. Bool flag indicating whether this entry is valid. |
0xA | 0x1 | PollingEnabled. Bool flag indicating whether polling is enabled. |
0xB | 0x1 | Unknown / padding? |
0xC | 0x4 | #JoyPollingMode |
EnableJoyPollingReceiveMode
Takes a type-0x21 input buffer, a TransferMemory handle, an u32 tmem_size, an u32 #JoyPollingMode, a #BusHandle, no output.
The TransferMemory is created with an user-specified output buffer, with permissions=R--.
The content of the TransferMemory depends of the #JoyPollingMode. This is used by GetJoyPollingReceivedData. Structure of the TransferMemory (DisableSixAxisPollingDataAccessor, EnableSixAxisPollingDataAccessor, JoyButtonOnlyPollingDataAccessor):
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Result. |
0x0 | 0x4 | Padding. |
0x8 | 0x18 | Initialized sysmodule-side, not used by sdknso. |
0x20 | 0x8 | Latest entry. |
0x28 | 0x8 | Total entries. |
The entries specific to the #JoyPollingMode follow, with 0xA entries total. Each entry starts with an u64 timestamp. Structure for each mode, after the timestamp:
DisableSixAxisPollingDataAccessor:
Offset | Size | Description |
---|---|---|
0x0 | 0x26 | Data |
0x26 | 0x1 | Size of data. |
0x27 | 0x1 | Padding |
0x28 | 0x8 | Timestamp |
JoyEnableSixAxisPollingDataAccessor:
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | Data |
0x8 | 0x1 | Size of data. |
0x9 | 0x7 | Padding |
0x10 | 0x8 | Timestamp |
JoyButtonOnlyPollingDataAccessor:
Offset | Size | Description |
---|---|---|
0x0 | 0x2C | Data |
0x2C | 0x1 | Size of data. |
0x2D | 0x3 | Padding |
0x30 | 0x8 | Timestamp |
DisableJoyPollingReceiveMode
Takes an input #BusHandle, no output.
SetStatusManagerType
Takes an input u32, no output.
This is used by sdknso immediately after mapping sharedmem (before #Initialize) with hard-coded value 0x2.
GyroscopeZeroDriftMode
This is "nn::hid::GyroscopeZeroDriftMode".
Value | Description |
---|---|
0 | Loose |
1 | Standard |
2 | Tight |
NpadStyleTag
This is "nn::hid::NpadStyleTag".
Bits | Description | Notes |
---|---|---|
0 | NpadFullKey | Pro Controller |
1 | NpadHandheld | Joy-Con controller in handheld mode |
2 | NpadJoyDual | Joy-Con controller in dual mode |
3 | NpadJoyLeft | Joy-Con left controller in single mode |
4 | NpadJoyRight | Joy-Con right controller in single mode |
5 | NpadGc | GameCube controller |
6 | NpadPalma | Poké Ball Plus controller |
7 | NpadLark | NES/Famicom controller |
8 | NpadHandheldLark | NES/Famicom controller in handheld mode |
9 | NpadLucia | SNES controller |
10-28 | Reserved | |
29 | NpadSystemExt | Generic external controller |
30 | NpadSystem | Generic controller |
31 | Reserved |
NpadIdType
This is "nn::hid::NpadIdType". This is the controller index used in sharedmem.
Value | Description |
---|---|
0x0 | No1 |
0x1 | No2 |
0x2 | No3 |
0x3 | No4 |
0x4 | No5 |
0x5 | No6 |
0x6 | No7 |
0x7 | No8 |
0x10 | Other |
0x20 | Handheld |
NpadJoyAssignmentMode
This is u32 enum "nn::hid::NpadJoyAssignmentMode".
Value | Description |
---|---|
0 | Dual (Set by #SetNpadJoyAssignmentModeDual) |
1 | Single (Set by #SetNpadJoyAssignmentModeSingleByDefault/#SetNpadJoyAssignmentModeSingle) |
NpadInterfaceType
This is "nn::hid::NpadInterfaceType".
Value | Description |
---|---|
1 | Bluetooth |
2 | Rail |
3 | USB |
4 | Unknown |
AbstractedPadState
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Type, only 1 bit can be set. Converted to #HdlsDeviceInfo::type internally by #SetAutoPilotVirtualPadState. |
0x4 | 0x1 | Flags. #SetAutoPilotVirtualPadState only uses bit0: when clear it will skip using the rest of the input and run #UnsetAutoPilotVirtualPadState internally. |
0x5 | 0x3 | Padding |
0x8 | 0x4 | RGBA Single Body Color |
0xC | 0x4 | RGBA Single Buttons Color |
0x10 | 0x1 | See #HiddbgHdlsDeviceInfo::#NpadInterfaceType. |
0x11 | 0x3 | Padding |
0x14 | 0x24 | #HdlsState. Unknown if the last 4-bytes are included in this struct, #SetAutoPilotVirtualPadState/#hiddbgGetAbstractedPadsState only uses the first 0x20-bytes. |
0x38 | 0x60 | Unused with #SetAutoPilotVirtualPadState/#GetAbstractedPadsState. |
Normally the input state is merged with an existing controller selected by Type. However in some cases (BIT(2-5) with type2!=0x2 and BIT(31)) it's detected as a dedicated controller.
Type:
Bits | #HdlsDeviceInfo::type bits | Description | Notes |
---|---|---|---|
0 | 0 | ||
1 | 15 | #DeviceType |= BIT(1) | |
2 | 1 | ||
3 | 2 | ||
4 | 1 | ||
5 | 2 | ||
6 | 3 | ||
7 | 11 | #DeviceType |= BIT(11) | |
8 | 12 | #DeviceType |= BIT(12) | |
9 | 13 | #DeviceType |= BIT(13) | |
10 | 14 | #DeviceType |= BIT(14) | |
11 | 15 | #DeviceType |= BIT(11) | |
12 | 12 | #DeviceType |= BIT(12) | |
13 | 13 | #DeviceType |= BIT(13) | |
14 | 14 | #DeviceType |= BIT(14) | |
15 | 17 | ||
31 | 21 | #DeviceType = BIT(31) |
The above "#DeviceType |=" notes only apply when type2 is 0x2.
HdlsNpadAssignment
This is a 0x208-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | s32 Total entries |
0x4 | 0x4 | Padding |
0x8 | 0x200(0x20*0x10) | Array of #HdlsNpadAssignmentEntry. |
HdlsNpadAssignmentEntry
This is a 0x20-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | HdlsHandle |
0x8 | 0x4 | ? |
0xC | 0x4 | ? |
0x10 | 0x8 | ? |
0x18 | 0x1 | ? |
0x19 | 0x7 | Padding |
HdlsStateList
This is a 0x408-byte struct.
[9.0.0+] This is a 0x488-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | s32 Total entries |
0x4 | 0x4 | Padding |
0x8 | <#HdlsStateListEntry size>*0x10 | Array of #HdlsStateListEntry. |
This contains a list of all controllers, including non-virtual controllers.
HdlsStateListEntry
This is a 0x40-byte struct.
[9.0.0+] This is a 0x48-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | HdlsHandle |
0x8 | #HdlsDeviceInfo size | #HdlsDeviceInfo. With #ApplyHdlsStateList this is only used when creating new devices. |
0x8 + #HdlsDeviceInfo size, with 8-byte alignment | 0x24 | #HdlsState |
<Immediately following the above> | 0x4 | Padding |
HdlsDeviceInfo
This is a 0x10-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #DeviceTypeInternal |
0x4 | 0x4 | RGBA Single Body Color |
0x8 | 0x4 | RGBA Single Buttons Color |
0xC | 0x1 | #NpadInterfaceType. Additional type field used with the above type field, if the value doesn't match one of the following a default is used. Type Pro-Controller: value 0x3 indicates that the controller is connected via USB. Type bit21: value 0x3 = unknown. When value is 0x2, state is merged with an existing controller (when the type value is compatible with this). Otherwise, it's a dedicated controller. |
0xD | 0x3 | Padding |
[9.0.0+] This is a 0x14-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | #DeviceTypeInternal |
0x1 | 0x1 | #NpadInterfaceType. Similar to the field from the old struct. |
0x2 | 0x2 | Padding |
0x4 | 0x4 | RGBA Single Body Color |
0x8 | 0x4 | RGBA Single Buttons Color |
0xC | 0x4 | RGBA Unknown Body Color |
0x10 | 0x4 | RGBA Unknown Buttons Color |
DeviceTypeInternal
This is "nn::hid::detail::DeviceTypeInternal".
Bits | Description |
---|---|
0-7 | BIT(N*4+0) = Pro Controller, BIT(N*4+1) = Joy-Con Left, BIT(N*4+2) = Joy-Con Right, BIT(N*4+3) = invalid. Where N is 0-1. |
8-10 | Pro Controller |
11 | Famicom left controller |
12 | Famicom right controller (with microphone) |
13 | NES left controller |
14 | NES right controller |
15-16 | Invalid |
17 | Generic external controller |
18-20 | Invalid |
21-23 | Generic controller |
[9.0.0+] This is "nn::hidtypes::DeviceType".
Value | DeviceType | UniquePadType | Description |
---|---|---|---|
1 | JoyRight, HandheldRight | JoyRight | Joy-Con right controller |
2 | JoyLeft, HandheldLeft | JoyLeft | Joy-Con left controller |
3 | FullKey | FullKey | Pro Controller |
4 | JoyLeft | JoyLeft | Reserved |
5 | JoyRight | JoyRight | Reserved |
6 | FullKey | FullKey | Reserved |
7 | LarkHvcLeft, HandheldLarkHvcLeft | JoyLeft | Famicom left controller |
8 | LarkHvcRight, HandheldLarkHvcRight | JoyRight | Famicom right controller (with microphone) |
9 | LarkNesLeft, HandheldLarkNesLeft | JoyLeft | NES left controller |
10 | LarkNesRight, HandheldLarkNesRight | JoyRight | NES right controller |
11 | Lucia | FullKey | SNES controller |
12 | Palma | Other | Poké Ball Plus controller |
13 | FullKey | FullKey | Gc controller |
14 | HandheldLeft | JoyLeft | Reserved |
15 | FullKey | FullKey | Reserved |
16 | FullKey | FullKey | Reserved |
17 | DebugPad | DebugPad | Debug controller |
18 | HandheldRight | JoyRight | Reserved |
19 | System | Other | Unknown (has NpadFullKey style tag) |
20 | System | Other | Unknown (has NpadJoyDual style tag) |
21 | System | Other | Unknown (has NpadJoyDual style tag) |
HdlsState
This is a 0x24-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | powerConnected for the main PowerInfo. |
0x1 | 0x1 | ORRed with powerConnected to set the value of the first byte for the controller flags. |
0x2 | 0x6 | Unknown |
0x8 | 0x4 | batteryCharge for the main PowerInfo. |
0xC | 0x4 | Buttons. Bit18 = HOME and bit19 = Capture. |
0x10 | 0x10(4*2*2) | Joystick data, see HID_Shared_Memory#Controller_State. |
0x20 | 0x1 | Unused for input. Set with output from #DumpHdlsStates (zero in some cases). |
0x21 | 0x3 | Padding |
[9.0.0+]:
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | batteryCharge for the main PowerInfo. |
0x4 | 0x4 | Unknown |
0x8 | 0x8 | Buttons, masked with 0xfffffffff00fffff. See above table regarding HOME/Capture buttons. |
0x10 | 0x10(4*2*2) | Joystick data, see HID_Shared_Memory#Controller_State. |
0x20 | 0x1 | Unused for input. Set with output from #DumpHdlsStates (zero in some cases). |
0x21 | 0x3 | Padding |
NotificationLedPattern
Offset | Size | Subcommand argdata bytepos | Subcommand argdata nibble | Description |
---|---|---|---|---|
0x0 | 0x1 | 0x0 | Low | Mini Cycle Base Duration. Value 0x1-0xF: 12.5ms - 187.5ms. Value 0x0 = 0ms/OFF. |
0x1 | 0x1 | 0x0 | High | Number of Mini Cycles + 1. Value 0x0-0xF: 1 - 16 mini cycles. |
0x2 | 0x1 | 0x1 | Low | Number of Full Cycles. Value 0x1-0xF: 1 - 15 full cycles. Value 0x0 is repeat forever, but if Mini Cycle Base Duration is set to 0x0, it does the 1st Mini Cycle with a 12.5ms base duration and then the LED stays on with LED Start Intensity. |
0x3 | 0x1 | 0x1 | High | LED Start Intensity. Value 0x0-0xF: 0% - 100%. (In HW, 1 - 241 duty) |
0x4 | 0x1 | 0x2 | High | Mini Cycle 1 LED Intensity. Value 0x0-0xF: 0% - 100%. (In HW, 1 - 241 duty) |
0x5 | 0x1 | 0x3 | High | Fading Transition Steps to Mini Cycle 1 (Uses PWM). Value 0x0: Instant. Each step duration is based on Mini Cycle Step Duration Multiplier. |
0x6 | 0x1 | 0x3 | Low | Final Step Duration Multiplier of Mini Cycle 1. Value is a Multiplier of Mini Cycle Base Duration. Value 0x0: 12.5ms, 0x1 - xF: 1x - 15x. |
0x7 | 0x1 | Unused | ||
0x8 | 0x1 | 0x2 | Low | Mini Cycle 2 LED Intensity. |
0x9 | 0x1 | 0x4 | High | Fading Transition Steps to Mini Cycle 2 (see above). |
0xA | 0x1 | 0x4 | Low | Final Step Duration Multiplier of Mini Cycle 2 (see above). |
0xB | 0x1 | Unused | ||
0xC | 0x1 | 0x5 | High | Mini Cycle 3 LED Intensity. |
0xD | 0x1 | 0x6 | High | Fading Transition Steps to Mini Cycle 3 (see above). |
0xE | 0x1 | 0x6 | Low | Final Step Duration Multiplier of Mini Cycle 3 (see above). |
0xF | 0x1 | Unused | ||
0x10 | 0x1 | 0x5 | Low | Mini Cycle 4 LED Intensity. |
0x11 | 0x1 | 0x7 | High | Fading Transition Duration to Mini Cycle 4 (see above). |
0x12 | 0x1 | 0x7 | Low | Final Step Duration Multiplier of Mini Cycle 4 (see above). |
0x13 | 0x1 | Unused | ||
0x14 | 0x1 | 0x8 | High | Mini Cycle 5 LED Intensity. |
0x15 | 0x1 | 0x9 | High | Fading Transition Steps to Mini Cycle 5 (see above). |
0x16 | 0x1 | 0x9 | Low | Final Step Duration Multiplier of Mini Cycle 5 (see above). |
0x17 | 0x1 | Unused | ||
0x18 | 0x1 | 0x8 | Low | Mini Cycle 6 LED Intensity. |
0x19 | 0x1 | 0xA | High | Fading Transition Steps to Mini Cycle 6 (see above). |
0x1A | 0x1 | 0xA | Low | Final Step Duration Multiplier of Mini Cycle 6 (see above). |
0x1B | 0x1 | Unused | ||
0x1C | 0x1 | 0xB | High | Mini Cycle 7 LED Intensity. |
0x1D | 0x1 | 0xC | High | Fading Transition Steps to Mini Cycle 7 (see above). |
0x1E | 0x1 | 0xC | Low | Final Step Duration Multiplier of Mini Cycle 7 (see above). |
0x1F | 0x1 | Unused | ||
0x20 | 0x1 | 0xB | Low | Mini Cycle 8 LED Intensity. |
0x21 | 0x1 | 0xD | Low | Fading Transition Steps to Mini Cycle 8 (see above). |
0x22 | 0x1 | 0xD | High | Final Step Duration Multiplier of Mini Cycle 8 (see above). |
0x23 | 0x1 | Unused | ||
0x24 | 0x1 | 0xE | High | Mini Cycle 9 LED Intensity. |
0x25 | 0x1 | 0xF | High | Fading Transition Steps to Mini Cycle 9 (see above). |
0x26 | 0x1 | 0xF | Low | Final Step Duration Multiplier of Mini Cycle 9 (see above). |
0x27 | 0x1 | Unused | ||
0x28 | 0x1 | 0xE | Low | Mini Cycle 10 LED Intensity. |
0x29 | 0x1 | 0x10 | High | Fading Transition Steps to Mini Cycle 10 (see above). |
0x2A | 0x1 | 0x10 | Low | Final Step Duration Multiplier of Mini Cycle 10 (see above). |
0x2B | 0x1 | Unused | ||
0x2C | 0x1 | 0x11 | High | Mini Cycle 11 LED Intensity. |
0x2D | 0x1 | 0x12 | High | Fading Transition Steps to Mini Cycle 11 (see above). |
0x2E | 0x1 | 0x12 | Low | Final Step Duration Multiplier of Mini Cycle 11 (see above). |
0x2F | 0x1 | Unused | ||
0x30 | 0x1 | 0x11 | Low | Mini Cycle 12 LED Intensity. |
0x31 | 0x1 | 0x13 | High | Fading Transition Steps to Mini Cycle 12 (see above). |
0x32 | 0x1 | 0x13 | Low | Final Step Duration Multiplier of Mini Cycle 12 (see above). |
0x33 | 0x1 | Unused | ||
0x34 | 0x1 | 0x14 | High | Mini Cycle 13 LED Intensity. |
0x35 | 0x1 | 0x15 | High | Fading Transition Steps to Mini Cycle 13 (see above). |
0x36 | 0x1 | 0x15 | Low | Final Step Duration Multiplier of Mini Cycle 13 (see above). |
0x37 | 0x1 | Unused | ||
0x38 | 0x1 | 0x14 | Low | Mini Cycle 14 LED Intensity. |
0x39 | 0x1 | 0x16 | High | Fading Transition Steps to Mini Cycle 14 (see above). |
0x3A | 0x1 | 0x16 | Low | Final Step Duration Multiplier of Mini Cycle 14 (see above). |
0x3B | 0x1 | Unused | ||
0x3C | 0x1 | 0x17 | High | Mini Cycle 15 LED Intensity. |
0x3D | 0x1 | 0x18 | High | Fading Transition Steps to Mini Cycle 15 (see above). |
0x3E | 0x1 | 0x18 | Low | Final Step Duration Multiplier of Mini Cycle 15 (see above). |
0x3F | 0x1 | Unused | ||
0x40 | 0x1 | 0x17 | Low | Mini Cycle 16 LED Intensity. |
0x41 | 0x1 | 0x19 | High | Fading Transition Steps to Mini Cycle 16 (see above). (Unused in older Joy-Con / Pro-Con FW. Unknown for new.) |
0x42 | 0x1 | 0x19 | Low | Final Step Duration Multiplier of Mini Cycle 16 (see above). (Unused in older Joy-Con / Pro-Con FW. Unknown for new.) |
0x43 | 0x1 | Unused | ||
0x44 | 0x1 | 0x1A | High | Unknown (Unused in older Joy-Con / Pro-Con FW. Unknown for new.) |
0x45 | 0x1 | 0x1A | Low | Unknown (Unused in older Joy-Con / Pro-Con FW. Unknown for new.) |
0x46 | 0x1 | Padding | ||
0x47 | 0x1 | Padding |
This is "nn::hid::system::NotificationLedPattern".
This is a 0x48-byte struct.
The above descriptions in the table are based on the info from here.
argdata in the subcommand is initialized as follows: ((u8*)cmd_argdata)[pos] = u8_in[pos2] | u8_in[pos3]<<4;
Hence, 4bits from pairs of 2-bytes of the input struct are combined to write to the subcommand. Only the low 4bits of each used byte in the struct is used. This is written to stack initially, then copied to the actual cmd_argdata (the data immediately following the subcommandID byte). There's a total of 0x1B-bytes of cmd_argdata initialized from this.
The layout of cmd_argdata is as follows:
Offset | Size | Description |
---|---|---|
0x0 | 0x1B | See above. |
0x1B | 0xB | Cleared to zero. |
0x26 | 0x5 | Unused |
0x2B | 0x8 | Set to an input value, which is hard-coded 0. |
0x33 | 0x2 | Set to value 0. |
0x35 | 0x1 | Set to value 1. |
DeviceType
This is "nn::hid::system::DeviceType".
Bits | Description |
---|---|
0 | FullKey |
1 | DebugPad |
2 | HandheldLeft |
3 | HandheldRight |
4 | JoyLeft |
5 | JoyRight |
6 | Palma |
7 | LarkHvcLeft |
8 | LarkHvcRight |
9 | LarkNesLeft |
10 | LarkNesRight |
11 | HandheldLarkHvcLeft |
12 | HandheldLarkHvcRight |
13 | HandheldLarkNesLeft |
14 | HandheldLarkNesRight |
15 | Lucia |
16-30 | Reserved |
31 | System |
UniquePadId
This is "nn::hid::system::UniquePadId". This struct contains an u64.
UniquePadType
This is "nn::hid::system::UniquePadType".
Value | Description |
---|---|
0x0 | Other |
0x1 | FullKey |
0x2 | JoyRight |
0x3 | JoyLeft |
0x4 | DebugPad |
SystemButtonConfigEmbedded
This is "nn::hid::system::ButtonConfigEmbedded". This is a 0x2C8-byte struct.
SystemButtonConfigFull
This is "nn::hid::system::ButtonConfigFull". This is a 0x2C8-byte struct.
SystemButtonConfigLeft
This is "nn::hid::system::ButtonConfigLeft". This is a 0x1C8-byte struct.
SystemButtonConfigRight
This is "nn::hid::system::ButtonConfigRight". This is a 0x1A0-byte struct.
ButtonConfigEmbedded
This is "nn::hidconfig::ButtonConfigEmbedded". This is a 0x54-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x44 (4*17) | #ButtonConfig, for the following buttons: DLeft, DUp, DRight, DDown, A, B, X, Y, L-Stick, R-Stick, L, R, ZL, ZR, -, +, Capture. |
0x44 | 0x8 | #JoystickConfig, for the left-stick. |
0x4C | 0x8 | #JoystickConfig, for the right-stick. |
ButtonConfig
u32 button mapping config. Must be value 0 - 22, which selects what button to map to.
Value | Description |
---|---|
0 | A |
1 | B |
2 | X |
3 | Y |
4 | L-Stick |
5 | R-Stick |
6 | L |
7 | R |
8 | ZL |
9 | ZR |
10 | - |
11 | + |
12 | DLeft |
13 | DUp |
14 | DRight |
15 | DDown |
16 | SL_Left |
17 | SR_Left |
18 | SL_Right |
19 | SR_Right |
20 | HOME |
21 | Capture |
22 | Disabled |
JoystickConfig
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | Orientation. 0 = default, 1 = enabled for Left, 2 = enabled for Right. |
0x4 | 0x1 | StickChange |
0x5 | 0x3 | Padding |
ButtonConfigFull
This is "nn::hidconfig::ButtonConfigFull". This is a 0x54-byte struct.
This is identical to #ButtonConfigEmbedded.
ButtonConfigLeft
This is "nn::hidconfig::ButtonConfigLeft". This is a 0x34-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x2C (4*11) | #ButtonConfig, for the following buttons: DLeft, DUp, DRight, DDown, L-Stick, L, ZL, -, SL_Left, SR_Left, Capture. |
0x2C | 0x8 | #JoystickConfig |
ButtonConfigRight
This is "nn::hidconfig::ButtonConfigRight". This is a 0x30-byte struct.
Offset | Size | Description |
---|---|---|
0x0 | 0x28 (4*10) | #ButtonConfig, for the following buttons: A, B, X, Y, R-Stick, R, ZR, +, SL_Right, SR_Right. |
0x28 | 0x8 | #JoystickConfig |
IrCameraHandle
This is "nn::irsensor::IrCameraHandle".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | PlayerNumber |
0x1 | 0x1 | DeviceType |
0x2 | 0x2 | Reserved |
IrCameraStatus
This is "nn::irsensor::IrCameraStatus".
Value | Description |
---|---|
0 | Available |
1 | Unsupported |
2 | Unconnected |
IrCameraInternalStatus
This is "nn::irsensor::IrCameraInternalStatus".
Value | Description |
---|---|
0 | Stopped |
1 | FirmwareUpdateNeeded |
2 | |
3 | |
4 | |
5 | FirmwareVersionRequested |
6 | FirmwareVersionIsInvalid |
7 | [4.0.0+] Ready |
8 | [4.0.0+] Setting |
IrSensorMode
This is "nn::irsensor::detail::StatusManager::IrSensorMode".
Value | Description |
---|---|
0 | None |
1 | MomentProcessor |
2 | ClusteringProcessor |
3 | ImageTransferProcessor |
4 | PointingProcessorMarker |
5 | TeraPluginProcessor |
6 | Unknown |
ImageProcessorStatus
This is "nn::irsensor::ImageProcessorStatus".
Value | Description |
---|---|
0 | Stopped |
1 | Running |
ImageTransferProcessorFormat
This is "nn::irsensor::ImageTransferProcessorFormat".
This controls the IR Sensor image resolution.
Value | Description |
---|---|
0 | 320x240 |
1 | 160x120 |
2 | 80x60 |
3 | [4.0.0+] 40x30 |
4 | [4.0.0+] 20x15 |
MomentProcessorConfig
This is "nn::irsensor::MomentProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime (default is 0x493E0) |
0x8 | 0x4 | LightTarget (default is 0) |
0xC | 0x4 | Gain (default is 0x8) |
0x10 | 0x1 | IsNegativeImageUsed (default is 0) |
0x11 | 0x7 | Reserved |
0x18 | 0x2 | WindowOfInterestX (default is 0) |
0x1A | 0x2 | WindowOfInterestY (default is 0) |
0x1C | 0x2 | WindowOfInterestWidth (default is 0x140) |
0x1E | 0x2 | WindowOfInterestHeight (default is 0xF0) |
0x20 | 0x4 | Preprocess (default is 0x1) |
0x24 | 0x4 | PreprocessIntensityThreshold (default is 0x50) |
PackedMomentProcessorConfig
This is "nn::irsensor::PackedMomentProcessorConfig".
This is converted from #MomentProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime (default is 0x493E0) |
0x8 | 0x1 | LightTarget (default is 0) |
0x9 | 0x1 | Gain (default is 0x8) |
0xA | 0x1 | IsNegativeImageUsed (default is 0) |
0xB | 0x5 | Reserved |
0x10 | 0x2 | WindowOfInterestX (default is 0) |
0x12 | 0x2 | WindowOfInterestY (default is 0) |
0x14 | 0x2 | WindowOfInterestWidth (default is 0x140) |
0x16 | 0x2 | WindowOfInterestHeight (default is 0xF0) |
0x18 | 0x4 | RequiredMcuVersion |
0x1C | 0x1 | Preprocess (default is 0x1) |
0x1D | 0x1 | PreprocessIntensityThreshold (default is 0x50) |
0x1E | 0x2 | Reserved |
ClusteringProcessorConfig
This is "nn::irsensor::ClusteringProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime (default is 200000) |
0x8 | 0x4 | LightTarget (default is 0) |
0xC | 0x4 | Gain (default is 0x2) |
0x10 | 0x1 | IsNegativeImageUsed (default is 0) |
0x11 | 0x7 | Reserved |
0x18 | 0x2 | WindowOfInterestX (default is 0) |
0x1A | 0x2 | WindowOfInterestY (default is 0) |
0x1C | 0x2 | WindowOfInterestWidth (default is 320) |
0x1E | 0x2 | WindowOfInterestHeight (default is 240) |
0x20 | 0x4 | ObjectPixelCountMin (default is 0x3) |
0x24 | 0x4 | ObjectPixelCountMax (default is 0x12C00) |
0x28 | 0x4 | ObjectIntensityMin (default is 150) |
0x2C | 0x1 | IsExternalLightFilterEnabled (default is 0x1) |
PackedClusteringProcessorConfig
This is "nn::irsensor::PackedClusteringProcessorConfig".
This is converted from #ClusteringProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x1 | LightTarget |
0x9 | 0x1 | Gain |
0xA | 0x1 | IsNegativeImageUsed |
0xB | 0x5 | Reserved |
0x10 | 0x2 | WindowOfInterestX |
0x12 | 0x2 | WindowOfInterestY |
0x14 | 0x2 | WindowOfInterestWidth |
0x16 | 0x2 | WindowOfInterestHeight |
0x18 | 0x4 | RequiredMcuVersion |
0x1C | 0x4 | ObjectPixelCountMin |
0x20 | 0x4 | ObjectPixelCountMax |
0x24 | 0x1 | ObjectIntensityMin |
0x25 | 0x1 | IsExternalLightFilterEnabled |
0x26 | 0x2 | Reserved |
ImageTransferProcessorConfig
This is "nn::irsensor::ImageTransferProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x4 | LightTarget |
0xC | 0x4 | Gain |
0x10 | 0x1 | IsNegativeImageUsed |
0x11 | 0x7 | Reserved |
0x18 | 0x4 | Format |
PackedImageTransferProcessorConfig
This is "nn::irsensor::PackedImageTransferProcessorConfig".
This is converted from #ImageTransferProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x1 | LightTarget |
0x9 | 0x1 | Gain |
0xA | 0x1 | IsNegativeImageUsed |
0xB | 0x5 | Reserved |
0x10 | 0x4 | RequiredMcuVersion |
0x14 | 0x1 | Format |
0x15 | 0x3 | Reserved |
ImageTransferProcessorState
This is "nn::irsensor::ImageTransferProcessorState".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | SamplingNumber |
0x8 | 0x4 | AmbientNoiseLevel |
0xC | 0x4 | Reserved |
TeraPluginProcessorConfig
This is "nn::irsensor::TeraPluginProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | Mode |
0x1 | 0x1 | |
0x2 | 0x1 | |
0x3 | 0x1 |
PackedTeraPluginProcessorConfig
This is "nn::irsensor::PackedTeraPluginProcessorConfig".
This is converted from #TeraPluginProcessorConfig. The data starting at offset 0x5 is only initialized by the user-process with [6.0.0+].
#TeraPluginProcessorConfig +0x0, +0x2, and +0x3 are copied to +0x4, 0x6, and +0x7 here. +0x5 here is set to 0x2 | (#TeraPluginProcessorConfig+0x1 << 7).
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | RequiredMcuVersion |
0x4 | 0x1 | Mode |
0x5 | 0x1 | |
0x6 | 0x1 | |
0x7 | 0x1 |
PointingProcessorConfig
This is "nn::irsensor::PointingProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | WindowOfInterestX (default is 0) |
0x2 | 0x2 | WindowOfInterestY (default is 0) |
0x4 | 0x2 | WindowOfInterestWidth (default is 320) |
0x6 | 0x2 | WindowOfInterestHeight (default is 240) |
PackedPointingProcessorConfig
This is "nn::irsensor::PackedPointingProcessorConfig".
This is converted from #PointingProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | WindowOfInterestX (default is 0) |
0x2 | 0x2 | WindowOfInterestY (default is 0) |
0x4 | 0x2 | WindowOfInterestWidth (default is 320) |
0x6 | 0x2 | WindowOfInterestHeight (default is 240) |
0x8 | 0x4 | RequiredMcuVersion |
PackedMcuVersion
This is "nn::irsensor::PackedMcuVersion".
Offset | Size | Description |
---|---|---|
0x0 | 0x2 | MajorVersion |
0x2 | 0x2 | MinorVersion |
Versions
MajorVersion | MinorVersion | SystemVersion |
---|---|---|
0x3 | 0xB | [1.0.0+] |
0x4 | 0x12 | [4.0.0+] |
0x5 | 0x18 | [5.0.0+] |
0x6 | 0x1A | [6.0.0+] |
0x8 | 0x1B | [8.0.0+] |
PackedFunctionLevel
This is nn::irsensor::PackedFunctionLevel.
Offset | Size | Description |
---|---|---|
0x0 | 0x1 | #IrSensorFunctionLevel |
0x1 | 0x3 | Reserved |
IrSensorFunctionLevel
This is "nn::irsensor::IrSensorFunctionLevel".
Value | SystemVersion |
---|---|
0 | [1.0.0+] |
1 | [4.0.0+] |
2 | [5.0.0+] |
3 | [6.0.0+] |
4 | [8.0.0+] |
ImageTransferProcessorExConfig
This is "nn::irsensor::ImageTransferProcessorExConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x4 | LightTarget |
0xC | 0x4 | Gain |
0x10 | 0x1 | IsNegativeImageUsed |
0x11 | 0x7 | Reserved |
0x18 | 0x4 | OrigFormat |
0x1C | 0x4 | TrimmingFormat |
0x20 | 0x2 | TrimmingStartX |
0x22 | 0x2 | TrimmingStartY |
0x24 | 0x1 | IsExternalLightFilterEnabled |
PackedImageTransferProcessorExConfig
This is "nn::irsensor::PackedImageTransferProcessorExConfig".
This is converted from #ImageTransferProcessorExConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x8 | ExposureTime |
0x8 | 0x1 | LightTarget |
0x9 | 0x1 | Gain |
0xA | 0x1 | IsNegativeImageUsed |
0xB | 0x5 | Reserved |
0x10 | 0x4 | RequiredMcuVersion |
0x14 | 0x1 | OrigFormat |
0x15 | 0x1 | TrimmingFormat |
0x16 | 0x2 | TrimmingStartX |
0x18 | 0x2 | TrimmingStartY |
0x1A | 0x1 | IsExternalLightFilterEnabled |
0x1B | 0x5 | Reserved |
IrLedProcessorConfig
This is "nn::irsensor::IrLedProcessorConfig".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | LightTarget |
PackedIrLedProcessorConfig
This is "nn::irsensor::PackedIrLedProcessorConfig".
This is converted from #IrLedProcessorConfig.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | RequiredMcuVersion |
0x4 | 0x1 | LightTarget |
0x5 | 0x3 | Padding |
AdaptiveClusteringProcessorConfig
This is "nn::irsensor::AdaptiveClusteringProcessorConfig".
AdaptiveClusteringProcessor was added with [5.0.0+].
This is converted to #TeraPluginProcessorConfig by the user-process. #TeraPluginProcessorConfig+0x3 is zero.
The default config is all-zero.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #AdaptiveClusteringMode |
0x4 | 0x4 | [6.0.0+] #AdaptiveClusteringTargetDistance |
AdaptiveClusteringMode
Value | Description |
---|---|
0 | StaticFov |
1 | DynamicFov |
Controls the mode for #TeraPluginProcessorConfig (DynamicFov -> 0x10; StaticFov -> 0x0F).
AdaptiveClusteringTargetDistance
Value | Description |
---|---|
0 | Near |
1 | Middle |
2 | Far |
Controls the second and third bytes for #TeraPluginProcessorConfig (Near-> 0x00, 0x00; Middle -> 0x01, 0x03; Far -> 0x01, 0x08).
HandAnalysisConfig
This is "nn::irsensor::HandAnalysisConfig".
This is converted to #TeraPluginProcessorConfig by the user-process, which is all-zero except the mode.
- pre-4.0.0: #TeraPluginProcessorConfig mode = #HandAnalysisMode - 1.
- [4.0.0+]: Silhouette = 0x5, Image = 0x6, SilhouetteAndImage = 0x7, SilhouetteOnly = 0xA.
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | #HandAnalysisMode |
HandAnalysisMode
Value | Description |
---|---|
0 | None (invalid) |
1 | Silhouette |
2 | Image |
3 | SilhouetteAndImage |
4 | [4.0.0+] SilhouetteOnly |
BusHandle
This is "nn::hidbus::BusHandle".
Offset | Size | Description |
---|---|---|
0x0 | 0x4 | AbstractedPadId |
0x4 | 0x1 | InternalIndex |
0x5 | 0x1 | PlayerNumber |
0x6 | 0x1 | BusTypeId |
0x7 | 0x1 | IsValid |
JoyPollingReceivedData
This is "nn::hidbus::JoyPollingReceivedData".
This is copied from the entries in TransferMemory by GetJoyPollingReceivedData.
Offset | Size | Description |
---|---|---|
0x0 | 0x30 | Data |
0x30 | 0x8 | Size of data. |
0x38 | 0x8 | Timestamp |
BusType
This is "nn::hidbus::BusType".
Value | Description |
---|---|
0 | JoyLeftRail |
1 | JoyRightRail |
2 | [6.0.0+] LarkRightRail (for microphone) |
JoyPollingMode
This is "nn::hidbus::JoyPollingMode".
Value | Description |
---|---|
0 | sdknso uses GetJoyDisableSixAxisPollingDataAccessor with this.
|
1 | sdknso uses GetJoyEnableSixAxisPollingDataAccessor with this.
|
2 | [6.0.0+] sdknso uses GetJoyButtonOnlyPollingDataAccessor with this.
|
Other values causes #EnableJoyPollingReceiveMode to assert.
ExternalDevices
The following devices are used via hidbus:
- Ring-Con
- Famicom right controller (with microphone)
RomFS
The hid-sysmodule RomFS contains:
ftmFwUpdate ├── NTD_4CD_1801.fts256 ├── NTD_4CD_2602.fts256 ├── NTD_4CD_3801.fts256 └── NTD_4CD_xxxx.fts256 [7.0.0+]
These are firmware files for the touchscreen controller.
[9.0.0+] The hid-sysmodule RomFS now contains:
ftmFwUpdate ├── FTS_00120100.fts256 ├── FTS_32000001.fts256 ├── FTS_32000102.fts256 ├── FTS_32000302.fts256 └── FTS_32000402.fts256
Firmware update
HID-sysmodule mounts the contents of title 0100000000000822 as "systemData" or the contents of title 010000000000B22B as "systemDataD". Both titles contain the same files, but 0100000000000822 is used on retail units while 010000000000B22B is used for development.
[10.0.0+]: The RomFs for hid-sysmodule was removed, the data which used to be in that RomFs was moved into this SystemData (the below .fts256 files).
These titles contain the following files:
- ExpectVersionInfo.csv - List in the format "[device],[type],[version]" where "device" can be "JoyLeft", "JoyRight", "FullKey", "Palma" or "Handheld", "type" can be "BT", "MCU", "USB" or "SioH" and "version" is the hexadecimal representation of the firmware file's version.
- FirmwareInfo.csv - List in the format "[device],[type],[version],[file]" where "device", "type" and "version" should match the values from "ExpectVersionInfo" and "file" is the name of the firmware file.
- ukyosakyo_ep2_ota.bin - Left/Right Joy-Con BT firmware.
- raizo_ep2_ota.bin - Pro Controller BT firmware.
- tera_ota.bin - Right Joy-Con MCU firmware.
- tera_ota_iap.bin - Right Joy-Con MCU (IAP profile) firmware.
- tera_fullkey_ota.bin - Pro Controller MCU firmware.
- tera_fullkey_ota_iap.bin - Pro Controller MCU (IAP profile) firmware.
- [6.0.0+] ProController.dfu - Pro Controller USB firmware.
- [6.1.0+] PalmaFw.bin - Poké Ball Plus BT firmware.
- [9.0.0+] ExpectVersionInfo-platform.hoag.csv - Same as "ExpectVersionInfo.csv" but for the Switch Lite platform.
- [9.0.0+] FirmwareInfo-platform.hoag.csv - Same as "FirmwareInfo.csv" but for the Switch Lite platform.
- [9.0.0+] sioh.bin - Switch Lite Joy-Con firmware.
- [9.0.0+] sioh_iap.bin - Switch Lite Joy-Con (IAP profile) firmware.
- [10.0.0+] FTS_00120100.fts256
- [10.0.0+] FTS_32000001.fts256
- [10.0.0+] FTS_32000102.fts256
- [10.0.0+] FTS_32000302.fts256
- [10.0.0+] FTS_32000402.fts256
- [10.0.0+] TouchScreenConfiguration.csv
- [10.0.0+] TouchScreenFirmwareInfo.csv