Nintendo Switch Brew - User contributions [en]

Fuses

2020-04-14T15:11:08Z

Gren: Added fuse count for 10.0.0

The Nintendo Switch makes use of Tegra's fuse driver for a number of operations. This driver is mapped to physical address 0x7000F800 with a total size of 0x400 bytes and exposes several registers for fuse programming.

Registers from 0x7000F800 to 0x7000F800 + 0xFF can be used to directly program the hardware fuse bitmap, while registers from 0x7000F800 + 0x100 (FUSE_CHIP_REG_START_OFFSET) to 0x7000F800 + 0x3FC (FUSE_CHIP_REG_END_OFFSET) represent cached values read from certain fuses.

== Registers ==
Below is a list of fuse driver registers used by the Switch's bootloaders.

=== Driver registers ===
{| class="wikitable" border="1"
! Name
! Address
|-
| [[#FUSE_FUSECTRL|FUSE_FUSECTRL]]
| 0x7000F800
|-
| [[#FUSE_FUSEADDR|FUSE_FUSEADDR]]
| 0x7000F804
|-
| [[#FUSE_FUSERDATA|FUSE_FUSERDATA]]
| 0x7000F808
|-
| [[#FUSE_FUSEWDATA|FUSE_FUSEWDATA]]
| 0x7000F80C
|-
| [[#FUSE_FUSETIME_RD1|FUSE_FUSETIME_RD1]]
| 0x7000F810
|-
| [[#FUSE_FUSETIME_RD2|FUSE_FUSETIME_RD2]]
| 0x7000F814
|-
| [[#FUSE_FUSETIME_PGM1|FUSE_FUSETIME_PGM1]]
| 0x7000F818
|-
| [[#FUSE_FUSETIME_PGM2|FUSE_FUSETIME_PGM2]]
| 0x7000F81C
|-
| [[#FUSE_PRIV2INTFC_START|FUSE_PRIV2INTFC_START]]
| 0x7000F820
|-
| [[#FUSE_FUSEBYPASS|FUSE_FUSEBYPASS]]
| 0x7000F824
|-
| [[#FUSE_PRIVATEKEYDISABLE|FUSE_PRIVATEKEYDISABLE]]
| 0x7000F828
|-
| [[#FUSE_DISABLEREGPROGRAM|FUSE_DISABLEREGPROGRAM]]
| 0x7000F82C
|-
| [[#FUSE_WRITE_ACCESS_SW|FUSE_WRITE_ACCESS_SW]]
| 0x7000F830
|-
| [[#FUSE_PWR_GOOD_SW|FUSE_PWR_GOOD_SW]]
| 0x7000F834
|-
| [[#FUSE_PRIV2RESHIFT|FUSE_PRIV2RESHIFT]]
| 0x7000F83C
|-
| [[#FUSE_FUSETIME_RD3|FUSE_FUSETIME_RD3]]
| 0x7000F84C
|-
| [[#FUSE_PRIVATE_KEY0_NONZERO|FUSE_PRIVATE_KEY0_NONZERO]]
| 0x7000F880
|-
| [[#FUSE_PRIVATE_KEY1_NONZERO|FUSE_PRIVATE_KEY1_NONZERO]]
| 0x7000F884
|-
| [[#FUSE_PRIVATE_KEY2_NONZERO|FUSE_PRIVATE_KEY2_NONZERO]]
| 0x7000F888
|-
| [[#FUSE_PRIVATE_KEY3_NONZERO|FUSE_PRIVATE_KEY3_NONZERO]]
| 0x7000F88C
|-
| [[#FUSE_PRIVATE_KEY4_NONZERO|FUSE_PRIVATE_KEY4_NONZERO]]
| 0x7000F890
|}

==== FUSE_FUSECTRL ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-1
| FUSE_FUSECTRL_CMD
0x00: IDLE
0x01: READ
0x02: WRITE
0x03: SENSE_CTRL
|-
| 16-20
| FUSE_FUSECTRL_STATE
0x00: STATE_RESET
0x01: STATE_POST_RESET
0x02: STATE_LOAD_ROW0
0x03: STATE_LOAD_ROW1
0x04: STATE_IDLE
0x05: STATE_READ_SETUP
0x06: STATE_READ_STROBE
0x07: STATE_SAMPLE_FUSES
0x08: STATE_READ_HOLD
0x09: STATE_FUSE_SRC_SETUP
0x0A: STATE_WRITE_SETUP
0x0B: STATE_WRITE_ADDR_SETUP
0x0C: STATE_WRITE_PROGRAM
0x0D: STATE_WRITE_ADDR_HOLD
0x0E: STATE_FUSE_SRC_HOLD
0x0F: STATE_LOAD_RIR
0x10: STATE_READ_BEFORE_WRITE_SETUP
0x11: STATE_READ_DEASSERT_PD
|-
| 21
| FUSE_FUSECTRL_MARGIN_READ
|-
| 22
| FUSE_FUSECTRL_RWL
|-
| 23
| FUSE_FUSECTRL_TRCS
|-
| 24
| FUSE_FUSECTRL_AT1
|-
| 25
| FUSE_FUSECTRL_AT0
|-
| 26
| FUSE_FUSECTRL_PD_CTRL
|-
| 30
| FUSE_FUSECTRL_FUSE_SENSE_DONE
|-
| 31
| FUSE_FUSECTRL_RECORD_SHIFT_DONE
|}

FUSE_FUSECTRL_CMD takes the fuse controller's operation mode. READ and WRITE interact directly with the hardware fuse bitmap while SENSE_CTRL flushes programmed values into the [[Fuses#Cache_registers|cache registers]].

FUSE_FUSECTRL_STATE returns the current state of the fuse controller.

FUSE_FUSECTRL_MARGIN_READ changes the fuse read trip point setting to margin read mode.

FUSE_FUSECTRL_RWL selects the fuse redundancy information row.

FUSE_FUSECTRL_PD_CTRL controls the fuse macro's power down mode.

FUSE_FUSECTRL_FUSE_SENSE_DONE is set if fuse sensing is completed.

FUSE_FUSECTRL_RECORD_SHIFT_DONE is set if ramrepair shift is completed.

==== FUSE_FUSEADDR ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-7
| FUSE_FUSEADDR_VLDFLD
|}

Takes the address of the fuse to be read/written/sensed.

==== FUSE_FUSERDATA ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-31
| FUSE_FUSERDATA_DATA
|}

Returns the value read from the fuse.

==== FUSE_FUSEWDATA ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-31
| FUSE_FUSEWDATA_DATA
|}

Takes the value to be written to the fuse.

==== FUSE_FUSETIME_RD1 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-7
| FUSE_FUSETIME_RD1_TSUR_MAX
|-
| 8-15
| FUSE_FUSETIME_RD1_TSUR_FUSEOUT
|-
| 16-23
| FUSE_FUSETIME_RD1_THR_MAX
|}

FUSE_FUSETIME_RD1_TSUR_MAX takes the maximum time for [[#FUSE_FUSECTRL|STATE_READ_SETUP]].

FUSE_FUSETIME_RD1_TSUR_FUSEOUT takes the time to spend on [[#FUSE_FUSECTRL|STATE_SAMPLE_FUSES]].

FUSE_FUSETIME_RD1_THR_MAX takes the maximum time for [[#FUSE_FUSECTRL|STATE_READ_HOLD]].

==== FUSE_FUSETIME_RD2 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-15
| FUSE_FUSETIME_RD2_TWIDTH_RD
|}

Takes the read strobe pulse width used during [[#FUSE_FUSECTRL|STATE_READ_STROBE]].

==== FUSE_FUSETIME_PGM1 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-7
| FUSE_FUSETIME_PGM1_TSUP_MAX
|-
| 8-15
| FUSE_FUSETIME_PGM1_TSUP_ADDR
|-
| 16-23
| FUSE_FUSETIME_PGM1_THP_ADDR
|-
| 24-31
| FUSE_FUSETIME_PGM1_THP_PS
|}

FUSE_FUSETIME_PGM1_TSUP_MAX takes the maximum time for [[#FUSE_FUSECTRL|STATE_WRITE_SETUP]].

FUSE_FUSETIME_PGM1_TSUP_ADDR takes the time to spend on [[#FUSE_FUSECTRL|STATE_WRITE_ADDR_SETUP]].

FUSE_FUSETIME_PGM1_THP_ADDR takes the time to spend on [[#FUSE_FUSECTRL|STATE_WRITE_ADDR_HOLD]].

FUSE_FUSETIME_PGM1_THP_PS takes the time to spend on [[#FUSE_FUSECTRL|STATE_FUSE_SRC_HOLD]].

==== FUSE_FUSETIME_PGM2 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-15
| FUSE_FUSETIME_PGM2_TWIDTH_PGM
|-
| 16-23
| FUSE_FUSETIME_PGM2_TSUP_PS
|-
| 24-31
| FUSE_FUSETIME_PGM2_THP_CSPS
|}

FUSE_FUSETIME_PGM2_TWIDTH_PGM takes the program strobe pulse width used during [[#FUSE_FUSECTRL|STATE_WRITE_PROGRAM]].

FUSE_FUSETIME_PGM2_TSUP_PS takes the time to spend on [[#FUSE_FUSECTRL|STATE_FUSE_SRC_SETUP]].

FUSE_FUSETIME_PGM2_THP_CSPS takes the time to spend on [[#FUSE_FUSECTRL|STATE_READ_BEFORE_WRITE_SETUP]].

==== FUSE_PRIV2INTFC_START ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIV2INTFC_START_DATA
|-
| 1
| FUSE_PRIV2INTFC_SKIP_RECORDS
|}

Controls the interface between the internal fuse chip (INTFC) and the fuse cache registers (PRIV).

==== FUSE_FUSEBYPASS ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_FUSEBYPASS_VAL
|}

If set, this register enables fuse bypass mode. This is only available in hardware where the [[#Bitmap|production_mode]] fuse remains unburnt.

==== FUSE_PRIVATEKEYDISABLE ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIVATEKEYDISABLE_VAL
|-
| 4
| FUSE_PRIVATEKEYDISABLE_TZ_STICKY_BIT_VAL
|}

If set, this register hides the [[#Bitmap|private_key]] fuses until the next reset.

==== FUSE_DISABLEREGPROGRAM ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_DISABLEREGPROGRAM_VAL
|}

If set, this register disables fuse programming until the next reset.

==== FUSE_WRITE_ACCESS_SW ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_WRITE_ACCESS_SW_CTRL
|-
| 16
| FUSE_WRITE_ACCESS_SW_STATUS
|}

Controls and returns the status of software writes to the fuse cache registers.

==== FUSE_PWR_GOOD_SW ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PWR_GOOD_SW_VAL
|}

This register is deprecated and has no effect.

==== FUSE_PRIV2RESHIFT ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIV2RESHIFT_TRIGENABLE_VAL
|-
| 1
| FUSE_PRIV2RESHIFT_TRIG_1_FCPU0_VAL
|-
| 2
| FUSE_PRIV2RESHIFT_TRIG_1_FCPU1_VAL
|-
| 3
| FUSE_PRIV2RESHIFT_TRIG_1_FCPU2_VAL
|-
| 4
| FUSE_PRIV2RESHIFT_TRIG_1_FCPU3_VAL
|-
| 5
| FUSE_PRIV2RESHIFT_TRIG_1_FL2_TBANK0_VAL
|-
| 6
| FUSE_PRIV2RESHIFT_TRIG_1_FL2_TBANK1_VAL
|-
| 7
| FUSE_PRIV2RESHIFT_TRIG_1_FL2_TBANK2_VAL
|-
| 8
| FUSE_PRIV2RESHIFT_TRIG_1_FL2_TBANK3_VAL
|-
| 9
| FUSE_PRIV2RESHIFT_TRIG_1_SCPU_VAL
|-
| 10
| FUSE_PRIV2RESHIFT_TRIG_1_SL2_TBANK_VAL
|-
| 11
| FUSE_PRIV2RESHIFT_STATUS_1_FCPU0_VAL
|-
| 12
| FUSE_PRIV2RESHIFT_STATUS_1_FCPU1_VAL
|-
| 13
| FUSE_PRIV2RESHIFT_STATUS_1_FCPU2_VAL
|-
| 14
| FUSE_PRIV2RESHIFT_STATUS_1_FCPU3_VAL
|-
| 15
| FUSE_PRIV2RESHIFT_STATUS_1_FL2_TBANK0_VAL
|-
| 16
| FUSE_PRIV2RESHIFT_STATUS_1_FL2_TBANK1_VAL
|-
| 17
| FUSE_PRIV2RESHIFT_STATUS_1_FL2_TBANK2_VAL
|-
| 18
| FUSE_PRIV2RESHIFT_STATUS_1_FL2_TBANK3_VAL
|-
| 19
| FUSE_PRIV2RESHIFT_STATUS_1_SCPU_VAL
|-
| 20
| FUSE_PRIV2RESHIFT_STATUS_1_SL2_TBANK_VAL
|}

Controls and returns the status of the RESHIFT hardware block used in RAM repair.

==== FUSE_FUSETIME_RD3 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-15
| FUSE_FUSETIME_RD3_TSUR_PDCS
|}

Takes the time to spend on [[#FUSE_FUSECTRL|STATE_READ_DEASSERT_PD]].

==== FUSE_PRIVATE_KEY0_NONZERO ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIVATE_KEY0_NONZERO_DATA
|}

Returns whether [[#Bitmap|private_key0]] is empty or not.

==== FUSE_PRIVATE_KEY1_NONZERO ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIVATE_KEY1_NONZERO_DATA
|}

Returns whether [[#Bitmap|private_key1]] is empty or not.

==== FUSE_PRIVATE_KEY2_NONZERO ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIVATE_KEY2_NONZERO_DATA
|}

Returns whether [[#Bitmap|private_key2]] is empty or not.

==== FUSE_PRIVATE_KEY3_NONZERO ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIVATE_KEY3_NONZERO_DATA
|}

Returns whether [[#Bitmap|private_key3]] is empty or not.

==== FUSE_PRIVATE_KEY4_NONZERO ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| FUSE_PRIVATE_KEY4_NONZERO_DATA
|}

Returns whether [[#Bitmap|private_key4]] is empty or not.

=== Cache registers ===
{| class="wikitable" border="1"
! Name
! Address
|-
| FUSE_PRODUCTION_MODE
| 0x7000F900
|-
| FUSE_JTAG_SECUREID_VALID
| 0x7000F904
|-
| FUSE_ODM_LOCK
| 0x7000F908
|-
| FUSE_OPT_OPENGL_EN
| 0x7000F90C
|-
| [[#FUSE_SKU_INFO|FUSE_SKU_INFO]]
| 0x7000F910
|-
| FUSE_CPU_SPEEDO_0_CALIB
| 0x7000F914
|-
| FUSE_CPU_IDDQ_CALIB
| 0x7000F918
|-
| FUSE_DAC_CRT_CALIB
| 0x7000F91C
|-
| FUSE_DAC_HDTV_CALIB
| 0x7000F920
|-
| FUSE_DAC_SDTV_CALIB
| 0x7000F924
|-
| [[#FUSE_OPT_FT_REV|FUSE_OPT_FT_REV]]
| 0x7000F928
|-
| FUSE_CPU_SPEEDO_1_CALIB
| 0x7000F92C
|-
| FUSE_CPU_SPEEDO_2_CALIB
| 0x7000F930
|-
| FUSE_SOC_SPEEDO_0_CALIB
| 0x7000F934
|-
| [[#FUSE_SOC_SPEEDO_1_CALIB|FUSE_SOC_SPEEDO_1_CALIB]]
| 0x7000F938
|-
| FUSE_SOC_SPEEDO_2_CALIB
| 0x7000F93C
|-
| FUSE_SOC_IDDQ_CALIB
| 0x7000F940
|-
| FUSE_RESERVED_PRODUCTION_WP
| 0x7000F944
|-
| [[#FUSE_FA|FUSE_FA]]
| 0x7000F948
|-
| FUSE_RESERVED_PRODUCTION
| 0x7000F94C
|-
| FUSE_HDMI_LANE0_CALIB
| 0x7000F950
|-
| FUSE_HDMI_LANE1_CALIB
| 0x7000F954
|-
| FUSE_HDMI_LANE2_CALIB
| 0x7000F958
|-
| FUSE_HDMI_LANE3_CALIB
| 0x7000F95C
|-
| FUSE_ENCRYPTION_RATE
| 0x7000F960
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY0]]
| 0x7000F964
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY1]]
| 0x7000F968
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY2]]
| 0x7000F96C
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY3]]
| 0x7000F970
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY4]]
| 0x7000F974
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY5]]
| 0x7000F978
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY6]]
| 0x7000F97C
|-
| [[#FUSE_PUBLIC_KEY|FUSE_PUBLIC_KEY7]]
| 0x7000F980
|-
| FUSE_TSENSOR1_CALIB
| 0x7000F984
|-
| FUSE_TSENSOR2_CALIB
| 0x7000F988
|-
| FUSE_VSENSOR_CALIB
| 0x7000F98C
|-
| [[#FUSE_OPT_CP_REV|FUSE_OPT_CP_REV]]
| 0x7000F990
|-
| FUSE_OPT_PFG
| 0x7000F994
|-
| FUSE_TSENSOR0_CALIB
| 0x7000F998
|-
| FUSE_FIRST_BOOTROM_PATCH_SIZE
| 0x7000F99C
|-
| FUSE_SECURITY_MODE
| 0x7000F9A0
|-
| [[#FUSE_PRIVATE_KEY|FUSE_PRIVATE_KEY0]]
| 0x7000F9A4
|-
| [[#FUSE_PRIVATE_KEY|FUSE_PRIVATE_KEY1]]
| 0x7000F9A8
|-
| [[#FUSE_PRIVATE_KEY|FUSE_PRIVATE_KEY2]]
| 0x7000F9AC
|-
| [[#FUSE_PRIVATE_KEY|FUSE_PRIVATE_KEY3]]
| 0x7000F9B0
|-
| [[#FUSE_PRIVATE_KEY|FUSE_PRIVATE_KEY4]]
| 0x7000F9B4
|-
| FUSE_ARM_JTAG_DIS
| 0x7000F9B8
|-
| FUSE_BOOT_DEVICE_INFO
| 0x7000F9BC
|-
| [[#FUSE_RESERVED_SW|FUSE_RESERVED_SW]]
| 0x7000F9C0
|-
| FUSE_OPT_VP9_DISABLE
| 0x7000F9C4
|-
| [[#FUSE_RESERVED_ODM0|FUSE_RESERVED_ODM0]]
| 0x7000F9C8
|-
| [[#FUSE_RESERVED_ODM1|FUSE_RESERVED_ODM1]]
| 0x7000F9CC
|-
| [[#FUSE_RESERVED_ODM2|FUSE_RESERVED_ODM2]]
| 0x7000F9D0
|-
| [[#FUSE_RESERVED_ODM3|FUSE_RESERVED_ODM3]]
| 0x7000F9D4
|-
| [[#FUSE_RESERVED_ODM4|FUSE_RESERVED_ODM4]]
| 0x7000F9D8
|-
| FUSE_RESERVED_ODM5
| 0x7000F9DC
|-
| [[#FUSE_RESERVED_ODM6|FUSE_RESERVED_ODM6]]
| 0x7000F9E0
|-
| [[#FUSE_RESERVED_ODM7|FUSE_RESERVED_ODM7]]
| 0x7000F9E4
|-
| FUSE_OBS_DIS
| 0x7000F9E8
|-
| FUSE_NOR_INFO
| 0x7000F9EC
|-
| FUSE_USB_CALIB
| 0x7000F9F0
|-
| FUSE_SKU_DIRECT_CONFIG
| 0x7000F9F4
|-
| FUSE_KFUSE_PRIVKEY_CTRL
| 0x7000F9F8
|-
| FUSE_PACKAGE_INFO
| 0x7000F9FC
|-
| FUSE_OPT_VENDOR_CODE
| 0x7000FA00
|-
| FUSE_OPT_FAB_CODE
| 0x7000FA04
|-
| FUSE_OPT_LOT_CODE_0
| 0x7000FA08
|-
| FUSE_OPT_LOT_CODE_1
| 0x7000FA0C
|-
| FUSE_OPT_WAFER_ID
| 0x7000FA10
|-
| FUSE_OPT_X_COORDINATE
| 0x7000FA14
|-
| FUSE_OPT_Y_COORDINATE
| 0x7000FA18
|-
| [[#FUSE_OPT_SEC_DEBUG_EN|FUSE_OPT_SEC_DEBUG_EN]]
| 0x7000FA1C
|-
| FUSE_OPT_OPS_RESERVED
| 0x7000FA20
|-
| FUSE_SATA_CALIB
| 0x7000FA24
|-
| FUSE_GPU_IDDQ_CALIB
| 0x7000FA28
|-
| FUSE_TSENSOR3_CALIB
| 0x7000FA2C
|-
| FUSE_SKU_BOND_OUT_L
| 0x7000FA30
|-
| FUSE_SKU_BOND_OUT_H
| 0x7000FA34
|-
| FUSE_SKU_BOND_OUT_U
| 0x7000FA38
|-
| FUSE_SKU_BOND_OUT_V
| 0x7000FA3C
|-
| FUSE_SKU_BOND_OUT_W
| 0x7000FA40
|-
| FUSE_OPT_SAMPLE_TYPE
| 0x7000FA44
|-
| FUSE_OPT_SUBREVISION
| 0x7000FA48
|-
| FUSE_OPT_SW_RESERVED_0
| 0x7000FA4C
|-
| FUSE_OPT_SW_RESERVED_1
| 0x7000FA50
|-
| FUSE_TSENSOR4_CALIB
| 0x7000FA54
|-
| FUSE_TSENSOR5_CALIB
| 0x7000FA58
|-
| FUSE_TSENSOR6_CALIB
| 0x7000FA5C
|-
| FUSE_TSENSOR7_CALIB
| 0x7000FA60
|-
| [[#FUSE_OPT_PRIV_SEC_EN|FUSE_OPT_PRIV_SEC_EN]]
| 0x7000FA64
|-
| [[#FUSE_PKC_DISABLE|FUSE_PKC_DISABLE]]
| 0x7000FA68
|-
| FUSE_FUSE2TSEC_DEBUG_DISABLE
| 0x7000FA7C
|-
| FUSE_TSENSOR_COMMON
| 0x7000FA80
|-
| FUSE_OPT_CP_BIN
| 0x7000FA84
|-
| FUSE_OPT_GPU_DISABLE
| 0x7000FA88
|-
| FUSE_OPT_FT_BIN
| 0x7000FA8C
|-
| FUSE_OPT_DONE_MAP
| 0x7000FA90
|-
| FUSE_APB2JTAG_DISABLE
| 0x7000FA98
|-
| FUSE_ODM_INFO
| 0x7000FA9C
|-
| FUSE_ARM_CRYPT_DE_FEATURE
| 0x7000FAA8
|-
| FUSE_WOA_SKU_FLAG
| 0x7000FAC0
|-
| FUSE_ECO_RESERVE_1
| 0x7000FAC4
|-
| FUSE_GCPLEX_CONFIG_FUSE
| 0x7000FAC8
|-
| FUSE_PRODUCTION_MONTH
| 0x7000FACC
|-
| FUSE_RAM_REPAIR_INDICATOR
| 0x7000FAD0
|-
| FUSE_TSENSOR9_CALIB
| 0x7000FAD4
|-
| FUSE_VMIN_CALIBRATION
| 0x7000FADC
|-
| FUSE_AGING_SENSOR_CALIBRATION
| 0x7000FAE0
|-
| FUSE_DEBUG_AUTHENTICATION
| 0x7000FAE4
|-
| FUSE_SECURE_PROVISION_INDEX
| 0x7000FAE8
|-
| FUSE_SECURE_PROVISION_INFO
| 0x7000FAEC
|-
| FUSE_OPT_GPU_DISABLE_CP1
| 0x7000FAF0
|-
| FUSE_SPARE_ENDIS
| 0x7000FAF4
|-
| [[#FUSE_ECO_RESERVE_0|FUSE_ECO_RESERVE_0]]
| 0x7000FAF8
|-
| FUSE_RESERVED_CALIB0
| 0x7000FB04
|-
| FUSE_RESERVED_CALIB1
| 0x7000FB08
|-
| FUSE_OPT_GPU_TPC0_DISABLE
| 0x7000FB0C
|-
| FUSE_OPT_GPU_TPC0_DISABLE_CP1
| 0x7000FB10
|-
| FUSE_OPT_CPU_DISABLE
| 0x7000FB14
|-
| FUSE_OPT_CPU_DISABLE_CP1
| 0x7000FB18
|-
| FUSE_TSENSOR10_CALIB
| 0x7000FB1C
|-
| FUSE_TSENSOR10_CALIB_AUX
| 0x7000FB20
|-
| FUSE_OPT_RAM_SVOP_DP
| 0x7000FB24
|-
| FUSE_OPT_RAM_SVOP_PDP
| 0x7000FB28
|-
| FUSE_OPT_RAM_SVOP_REG
| 0x7000FB2C
|-
| FUSE_OPT_RAM_SVOP_SP
| 0x7000FB30
|-
| FUSE_OPT_RAM_SVOP_SMPDP
| 0x7000FB34
|-
| FUSE_OPT_GPU_TPC0_DISABLE_CP2
| 0x7000FB38
|-
| FUSE_OPT_GPU_TPC1_DISABLE
| 0x7000FB3C
|-
| FUSE_OPT_GPU_TPC1_DISABLE_CP1
| 0x7000FB40
|-
| FUSE_OPT_GPU_TPC1_DISABLE_CP2
| 0x7000FB44
|-
| FUSE_OPT_CPU_DISABLE_CP2
| 0x7000FB48
|-
| FUSE_OPT_GPU_DISABLE_CP2
| 0x7000FB4C
|-
| FUSE_USB_CALIB_EXT
| 0x7000FB50
|-
| FUSE_RESERVED_FIELD
| 0x7000FB54
|-
| FUSE_OPT_ECC_EN
| 0x7000FB58
|-
| FUSE_SPARE_REALIGNMENT_REG
| 0x7000FB7C
|-
| FUSE_SPARE_BIT_0
| 0x7000FB80
|-
| FUSE_SPARE_BIT_1
| 0x7000FB84
|-
| [[#FUSE_SPARE_BIT_2|FUSE_SPARE_BIT_2]]
| 0x7000FB88
|-
| [[#FUSE_SPARE_BIT_3|FUSE_SPARE_BIT_3]]
| 0x7000FB8C
|-
| [[#FUSE_SPARE_BIT_4|FUSE_SPARE_BIT_4]]
| 0x7000FB90
|-
| [[#FUSE_SPARE_BIT_5|FUSE_SPARE_BIT_5]]
| 0x7000FB94
|-
| FUSE_SPARE_BIT_6
| 0x7000FB98
|-
| FUSE_SPARE_BIT_7
| 0x7000FB9C
|-
| FUSE_SPARE_BIT_8
| 0x7000FBA0
|-
| FUSE_SPARE_BIT_9
| 0x7000FBA4
|-
| FUSE_SPARE_BIT_10
| 0x7000FBA8
|-
| FUSE_SPARE_BIT_11
| 0x7000FBAC
|-
| FUSE_SPARE_BIT_12
| 0x7000FBB0
|-
| FUSE_SPARE_BIT_13
| 0x7000FBB4
|-
| FUSE_SPARE_BIT_14
| 0x7000FBB8
|-
| FUSE_SPARE_BIT_15
| 0x7000FBBC
|-
| FUSE_SPARE_BIT_16
| 0x7000FBC0
|-
| FUSE_SPARE_BIT_17
| 0x7000FBC4
|-
| FUSE_SPARE_BIT_18
| 0x7000FBC8
|-
| FUSE_SPARE_BIT_19
| 0x7000FBCC
|-
| FUSE_SPARE_BIT_20
| 0x7000FBD0
|-
| FUSE_SPARE_BIT_21
| 0x7000FBD4
|-
| FUSE_SPARE_BIT_22
| 0x7000FBD8
|-
| FUSE_SPARE_BIT_23
| 0x7000FBDC
|-
| FUSE_SPARE_BIT_24
| 0x7000FBE0
|-
| FUSE_SPARE_BIT_25
| 0x7000FBE4
|-
| FUSE_SPARE_BIT_26
| 0x7000FBE8
|-
| FUSE_SPARE_BIT_27
| 0x7000FBEC
|-
| FUSE_SPARE_BIT_28
| 0x7000FBF0
|-
| FUSE_SPARE_BIT_29
| 0x7000FBF4
|-
| FUSE_SPARE_BIT_30
| 0x7000FBF8
|-
| FUSE_SPARE_BIT_31
| 0x7000FBFC
|}

==== FUSE_SKU_INFO ====
Stores the SKU ID (must be 0x83).

==== FUSE_OPT_FT_REV ====
Stores the FT (Final Test) revision.

Original launch units have this value set to 0xA0 (revision 5.0). The first batch of patched units have this value set to 0xC0 (revision 6.0). The second batch of patched units have this value set to 0xE0 (revision 7.0)

==== FUSE_SOC_SPEEDO_1_CALIB ====
Stores the bootrom patch version.

==== FUSE_FA ====
Stores failure analysis mode.

==== FUSE_PUBLIC_KEY ====
Stores the SHA256 hash of the 2048-bit RSA key expected at BCT+0x210.

==== FUSE_OPT_CP_REV ====
Stores the CP (Chip Probing) revision.

Original launch units have this value set to 0xA0 (revision 5.0). Patched units have this value set to 0x103 (revision 8.3).

==== FUSE_PRIVATE_KEY ====
Stores the 160-bit private key (128 bit SBK + 32-bit device key).

Reads to these registers after the SBK is locked out produce all-FF output.

==== FUSE_RESERVED_SW ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-2
| Boot device
|-
| 3
| Skip device selection straps (0 = don't skip; 1 = skip)
|-
| 4
| ENABLE_CHARGER_DETECT
|-
| 5
| ENABLE_WATCHDOG
|-
| 6
| Forced RCM two button mode (0 = Only VOLUME_UP; 1 = VOLUME_UP + HOME)
|-
| 7
| RCM USB controller mode (0 = USB 2.0; 1 = XUSB)
|}

Stores software reserved configuration values.

Original launch units have the RCM USB controller mode set to USB 2.0, while the first batch of patched units have the RCM USB controller mode set to XUSB.

==== FUSE_RESERVED_ODM0 ====
Stores an hardware ID.

==== FUSE_RESERVED_ODM1 ====
Stores an hardware ID.

==== FUSE_RESERVED_ODM2 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-4
| [5.0.0+] Used as key generation (patched units only)
|}

Stores an hardware ID in original launch units, but in patched units it stores a single value (key generation).

==== FUSE_RESERVED_ODM3 ====
Stores an hardware ID in original launch units, but is empty in patched units.

==== FUSE_RESERVED_ODM4 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0-1
| Unit type (0x00 = Retail, 0x03 = Debug)
|-
| 2
| Production flag (0x00 = Prototype, 0x01 = Production)
|-
| [1.0.0-3.0.2] 3-5
[4.0.0+] 3-7
| DRAM ID
|-
| 8
| Development flag (0x00 = Retail, 0x01 = Development)
|-
| 9
| Unit type flag (0x00 = Debug, 0x01 = Retail)
|-
| 10
| [3.0.0+] Kiosk flag (0x00 = Retail, 0x01 = Kiosk/Quest)
|-
| 11
| [5.0.0+] Patch flag (0x00 = Unpatched, 0x01 = Patched)
|-
| 16-19
| [4.0.0+] New hardware type (0x00 = Icosa, 0x01 = Iowa, 0x02 = Hoag)
|}

Stores some device configuration parameters.

==== FUSE_RESERVED_ODM5 ====
Empty and unused.

==== FUSE_RESERVED_ODM6 ====
Returns the value of the [[#reserved_odm6|reserved_odm6]] anti-downgrade fuse.

==== FUSE_RESERVED_ODM7 ====
Returns the value of the [[#reserved_odm7|reserved_odm7]] anti-downgrade fuse.

==== FUSE_OPT_SEC_DEBUG_EN ====
Controls the [[TSEC#TSEC_SCP_CTL_STAT|Falcon SCP]] debug mode.

==== FUSE_OPT_PRIV_SEC_EN ====
Controls the [[TSEC#FALCON_SCTL|Falcon Light Secure]] feature.

==== FUSE_PKC_DISABLE ====
Returns if public key crypto is used or not.

==== FUSE_ECO_RESERVE_0 ====
Returns the chip unique AID.

==== FUSE_SPARE_BIT_2 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| Speedo fusing revision
|}

==== FUSE_SPARE_BIT_3 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| Speedo fusing revision
|}

==== FUSE_SPARE_BIT_4 ====
{| class="wikitable" border="1"
! Bits
! Description
|-
| 0
| Speedo fusing revision
|}

==== FUSE_SPARE_BIT_5 ====
Must be non-zero on retail units, otherwise the first bootloader panics.
On prototype units it can be zero, which tells the bootloader to choose from two pre-production master key seeds. If set to non-zero on a prototype unit, it tells the bootloader to choose from two master key seeds (with the second one being the same as the retail master key seed).

[4.0.0+] This value is no longer used during boot.

== Bitmap ==
The actual hardware fuses are stored in a bitmap and may be programmed through the fuse driver after enabling fuse programming.

Fuse numbers are relative to the start of the fuse bitmap where each element is a 4 byte word and has a redundant alias. A single fuse write operation must always write the same value to '''fuse_bitmap + ((fuse_number + 0) << 2)''' (PRIMARY_ALIAS) and '''fuse_bitmap + ((fuse_number + 1) << 2)''' (REDUNDANT_ALIAS). However, spare bits and all fuses afterwards in the fuse bitmap, no longer have a redundant alias.

Below is a list of common fuses used by Tegra devices (and applicable to the Switch).

{| class="wikitable" border="1"
! Name
! Number
! Redundant number
! Bits
|-
| enable_fuse_program
| 0
| 1
| 0
|-
| disable_fuse_program
| 0
| 1
| 1
|-
| bypass_fuses
| 0
| 1
| 2
|-
| jtag_direct_access_disable
| 0
| 1
| 3
|-
| production_mode
| 0
| 1
| 4
|-
| jtag_secureid_valid
| 0
| 1
| 5
|-
| odm_lock
| 0
| 1
| 6-9
|-
| fa_mode
| 0
| 1
| 10
|-
| security_mode
| 0
| 1
| 11
|-
| arm_debug_dis
| 0
| 1
| 12
|-
| obs_dis
| 0
| 1
| 13
|-
| public_key0
| 10
| 11
| 30-31
|-
| public_key0
| 12
| 13
| 0-29
|-
| public_key1
| 12
| 13
| 30-31
|-
| public_key1
| 14
| 15
| 0-29
|-
| public_key2
| 14
| 15
| 30-31
|-
| public_key2
| 16
| 17
| 0-29
|-
| public_key3
| 16
| 17
| 30-31
|-
| public_key3
| 18
| 19
| 0-29
|-
| public_key4
| 18
| 19
| 30-31
|-
| public_key4
| 20
| 21
| 0-29
|-
| public_key5
| 20
| 21
| 30-31
|-
| public_key5
| 22
| 23
| 0-29
|-
| public_key6
| 22
| 23
| 30-31
|-
| public_key6
| 24
| 25
| 0-29
|-
| public_key7
| 24
| 25
| 30-31
|-
| public_key7
| 26
| 27
| 0-29
|-
| private_key0
| 34
| 35
| 12-31
|-
| private_key0
| 36
| 37
| 0-11
|-
| private_key1
| 36
| 37
| 12-31
|-
| private_key1
| 38
| 39
| 0-11
|-
| private_key2
| 38
| 39
| 12-31
|-
| private_key2
| 40
| 41
| 0-11
|-
| private_key3
| 40
| 41
| 12-31
|-
| private_key3
| 42
| 43
| 0-11
|-
| private_key4
| 42
| 43
| 12-31
|-
| private_key4
| 44
| 45
| 0-11
|-
| boot_device_info
| 44
| 45
| 12-27
|-
| reserved_sw
| 44
| 45
| 28-31
|-
| reserved_sw
| 46
| 47
| 0-3
|-
| reserved_odm0
| 46
| 47
| 5-31
|-
| reserved_odm0
| 48
| 49
| 0-4
|-
| reserved_odm1
| 48
| 49
| 5-31
|-
| reserved_odm1
| 50
| 51
| 0-4
|-
| reserved_odm2
| 50
| 51
| 5-31
|-
| reserved_odm2
| 52
| 53
| 0-4
|-
| reserved_odm3
| 52
| 53
| 5-31
|-
| reserved_odm3
| 54
| 55
| 0-4
|-
| reserved_odm4
| 54
| 55
| 5-31
|-
| reserved_odm4
| 56
| 57
| 0-4
|-
| reserved_odm5
| 56
| 57
| 5-31
|-
| reserved_odm5
| 58
| 59
| 0-4
|-
| [[#reserved_odm6|reserved_odm6]]
| 58
| 59
| 5-31
|-
| [[#reserved_odm6|reserved_odm6]]
| 60
| 61
| 0-4
|-
| [[#reserved_odm7|reserved_odm7]]
| 60
| 61
| 5-31
|-
| [[#reserved_odm7|reserved_odm7]]
| 62
| 63
| 0-4
|-
| kfuse_privkey_ctrl
| 64
| 65
| 13-14
|-
| package_info
| 64
| 65
| 15-18
|-
| opt_vendor_code
| 64
| 65
| 19-22
|-
| opt_fab_code
| 64
| 65
| 23-28
|-
| opt_lot_code_0
| 64
| 65
| 29-31
|-
| opt_lot_code_0
| 66
| 67
| 0-28
|-
| opt_lot_code_1
| 66
| 67
| 29-31
|-
| opt_lot_code_1
| 68
| 69
| 0-24
|-
| opt_wafer_id
| 68
| 69
| 25-30
|-
| opt_x_coordinate
| 68
| 69
| 31
|-
| opt_x_coordinate
| 70
| 71
| 0-7
|-
| opt_y_coordinate
| 70
| 71
| 8-16
|-
| opt_sec_debug_en
| 70
| 71
| 17
|-
| opt_ops_reserved
| 70
| 71
| 18-23
|-
| sata_calib
| 70
| 71
| 24-25
|-
| opt_priv_sec_en
| 90
| 91
| 8
|-
| pkc_disable
| 90
| 91
| 9
|-
| fuse2tsec_debug_disable
| 90
| 91
| 10
|-
| secure_provision_index
| 90
| 91
| 24-27
|-
| secure_provision_info
| 90
| 91
| 28-29
|-
| spare_bit_0
| 100
| None
| 16
|-
| spare_bit_1
| 100
| None
| 17
|-
| spare_bit_2
| 100
| None
| 18
|-
| spare_bit_3
| 100
| None
| 19
|-
| spare_bit_4
| 100
| None
| 20
|-
| spare_bit_5
| 100
| None
| 21
|-
| spare_bit_6
| 100
| None
| 22
|-
| spare_bit_7
| 100
| None
| 23
|-
| spare_bit_8
| 100
| None
| 24
|-
| spare_bit_9
| 100
| None
| 25
|-
| spare_bit_10
| 100
| None
| 26
|-
| spare_bit_11
| 100
| None
| 27
|-
| spare_bit_12
| 100
| None
| 28
|-
| spare_bit_13
| 100
| None
| 29
|-
| spare_bit_14
| 100
| None
| 30
|-
| spare_bit_15
| 100
| None
| 31
|-
| spare_bit_16
| 101
| None
| 16
|-
| spare_bit_17
| 101
| None
| 17
|-
| spare_bit_18
| 101
| None
| 18
|-
| spare_bit_19
| 101
| None
| 19
|-
| spare_bit_20
| 101
| None
| 20
|-
| spare_bit_21
| 101
| None
| 21
|-
| spare_bit_22
| 101
| None
| 22
|-
| spare_bit_23
| 101
| None
| 23
|-
| spare_bit_24
| 101
| None
| 24
|-
| spare_bit_25
| 101
| None
| 25
|-
| spare_bit_26
| 101
| None
| 26
|-
| spare_bit_27
| 101
| None
| 27
|-
| spare_bit_28
| 101
| None
| 28
|-
| spare_bit_29
| 101
| None
| 29
|-
| spare_bit_30
| 101
| None
| 30
|-
| spare_bit_31
| 101
| None
| 31
|-
| aid
| 103
| None
| 2-31
|-
| aid
| 104
| None
| 0-1
|-
| ramrepair_record0
| 106
| None
| 0-31
|-
| ramrepair_record1
| 107
| None
| 0-31
|-
| ramrepair_record2
| 108
| None
| 0-31
|-
| ramrepair_record3
| 109
| None
| 0-31
|-
| ramrepair_record4
| 110
| None
| 0-31
|-
| ramrepair_record5
| 111
| None
| 0-31
|-
| ramrepair_record6
| 112
| None
| 0-31
|-
| ramrepair_record7
| 113
| None
| 0-31
|-
| [[#irom_patch|irom_patch]]
| 114
| None
| Variable
|}

=== reserved_odm6 ===
Used for [[#Anti-downgrade|anti-downgrade]] control.

=== reserved_odm7 ===
Used for [[#Anti-downgrade|anti-downgrade]] control.

=== irom_patch ===
Tegra210 based hardware such as the Switch provides support for bootrom patches. The patch data is burned to the hardware fuse bitmap using a specific format (see [https://gist.github.com/shuffle2/f8728159da100e9df2606d43925de0af shuffle2's ipatch decoder]). The bootrom reads these fuses in order to initialize the IPATCH hardware, which allows overriding data returned for code and data fetches done by BPMP.

The following represents the patch data dumped from a Switch console:
<syntaxhighlight>
RAM:00000000 ; =============== S U B R O U T I N E =======================================
RAM:00000000
RAM:00000000
RAM:00000000 irom_svc_dispatch
RAM:00000000 STMFD SP!, {R0-R2} ; ipatches (new):
RAM:00000000 ; 0 b57df00 16ae df00 : svc #0x00 (offset 0x48)
RAM:00000000 ; 1 1820df22 3040 df22 : svc #0x22 (offset 0x8c)
RAM:00000000 ; 2 3797df26 6f2e df26 : svc #0x26 (offset 0x94)
RAM:00000000 ; 3 3b4d2100 769a 2100 : movs r1, #0x00
RAM:00000000 ; 4 42bdf2c 856 df2c : svc #0x2c (offset 0xa0)
RAM:00000000 ; 5 37aadf42 6f54 df42 : svc #0x42 (offset 0xcc)
RAM:00000000 ; 6 972df4b 12e4 df4b : svc #0x4b (offset 0xde)
RAM:00000000 ; 7 2293df54 4526 df54 : svc #0x54 (offset 0xf0)
RAM:00000000 ; 8 21fadf5d 43f4 df5d : svc #0x5d (offset 0x102)
RAM:00000000 ; 9 bba2ac57 17744 ac57 : data
RAM:00000000 ; 10 bbac3d19 17758 3d19 : data
RAM:00000000 ; 11 1e952001 3d2a 2001 : movs r0, #0x01
RAM:00000000 ;
RAM:00000000 ; ipatches (old):
RAM:00000000 ; 0 b57df00 16ae df00 : svc #0x00 (offset 0x48)
RAM:00000000 ; 1 1820df22 3040 df22 : svc #0x22 (offset 0x8c)
RAM:00000000 ; 2 3797df26 6f2e df26 : svc #0x26 (offset 0x94)
RAM:00000000 ; 3 7d9e2000 fb3c 2000 : movs r0, #0x00
RAM:00000000 ; 4 42bdf2c 856 df2c : svc #0x2c (offset 0xa0)
RAM:00000000 ; 5 37aadf42 6f54 df42 : svc #0x42 (offset 0xcc)
RAM:00000000 ; 6 972df4b 12e4 df4b : svc #0x4b (offset 0xde)
RAM:00000000 ; 7 2293df54 4526 df54 : svc #0x54 (offset 0xf0)
RAM:00000000 ; 8 21fadf5d 43f4 df5d : svc #0x5d (offset 0x102)
RAM:00000000 ; 9 bba2ac57 17744 ac57 : data
RAM:00000000 ; 10 bbac3d19 17758 3d19 : data
RAM:00000000 ; 11 1e952001 3d2a 2001 : movs r0, #0x01
RAM:00000004 MOV R2, LR
RAM:00000008 SUB R2, R2, #2
RAM:0000000C LDR R2, [R2]
RAM:00000010 AND R2, R2, #0xFF
RAM:00000014 MOV R2, R2,LSL#1
RAM:00000018 LDR R0, =0x1007B0
RAM:0000001C LDR R1, =0x1007F8
RAM:00000020 SUB R1, R1, R0
RAM:00000024 LDR R0, =0x40004C30
RAM:00000028 ADD R0, R0, R1
RAM:0000002C ADD R2, R2, R0
RAM:00000030 ORR R2, R2, #1
RAM:00000034 LDMFD SP!, {R0,R1}
RAM:00000038 BX R2
RAM:00000038 ; End of function irom_svc_dispatch
RAM:00000038
RAM:00000038 ; ---------------------------------------------------------------------------
RAM:0000003C dword_3C DCD 0x1007B0 ; DATA XREF: irom_svc_dispatch+18↑r
RAM:00000040 dword_40 DCD 0x1007F8 ; DATA XREF: irom_svc_dispatch+1C↑r
RAM:00000044 dword_44 DCD 0x40004C30 ; DATA XREF: irom_svc_dispatch+24↑r
RAM:00000048 CODE16
RAM:00000048
RAM:00000048 ; =============== S U B R O U T I N E =======================================
RAM:00000048
RAM:00000048
RAM:00000048 sub_48
RAM:00000048 MOVS R2, #0 ; 0 b57df00 16ae df00 : svc #0x00 (offset 0x48)
RAM:0000004A MVNS R2, R2
RAM:0000004C LDR R1, =0x60006410
RAM:0000004E STR R2, [R1,#0x30]
RAM:00000050 STR R2, [R1,#0x38]
RAM:00000052 LDR R1, =0x600060F8
RAM:00000054 STR R2, [R1]
RAM:00000056 STR R2, [R1,#4]
RAM:00000058 LDR R1, =0x60006284
RAM:0000005A STR R2, [R1]
RAM:0000005C STR R2, [R1,#0x18]
RAM:0000005E ADDS R1, #0x80
RAM:00000060 ADDS R1, #0x1C
RAM:00000062 STR R2, [R1]
RAM:00000064 STR R2, [R1,#8]
RAM:00000066 STR R2, [R1,#0x10]
RAM:00000068 ADDS R1, #0x80
RAM:0000006A STR R2, [R1]
RAM:0000006C STR R2, [R1,#4]
RAM:0000006E LDR R1, =0x60006554
RAM:00000070 STR R2, [R1]
RAM:00000072 MOVS R2, #0xA0000000
RAM:00000076 LDR R1, =0x60006148
RAM:00000078 STR R2, [R1]
RAM:0000007A ADDS R1, #0x38 ; '8'
RAM:0000007C STR R2, [R1]
RAM:0000007E MOVS R2, #0xE0000000
RAM:00000082 LDR R1, =0x600066A0
RAM:00000084 STR R2, [R1]
RAM:00000086 MOVS R1, #0
RAM:00000088 MOVS R0, #0xE
RAM:0000008A B pop_r2_mov_pc_lr
RAM:0000008A ; End of function sub_48
RAM:0000008A
RAM:0000008C
RAM:0000008C ; =============== S U B R O U T I N E =======================================
RAM:0000008C
RAM:0000008C
RAM:0000008C sub_8C
RAM:0000008C LDR R0, [R1,#0x18] ; 1 1820df22 3040 df22 : svc #0x22 (offset 0x8c)
RAM:0000008E MOVS R2, #1
RAM:00000090 ORRS R0, R2
RAM:00000092 B pop_r2_mov_pc_lr
RAM:00000092 ; End of function sub_8C
RAM:00000092
RAM:00000094
RAM:00000094 ; =============== S U B R O U T I N E =======================================
RAM:00000094
RAM:00000094
RAM:00000094 sub_94
RAM:00000094 LDR R2, [R4,#0x50] ; 2 3797df26 6f2e df26 : svc #0x26 (offset 0x94)
RAM:00000096 ADDS R2, R2, #2
RAM:00000098 STR R2, [R4,#0x50]
RAM:0000009A SUBS R1, #0x80
RAM:0000009C STR R1, [R4,#0x34]
RAM:0000009E B pop_r2_mov_pc_lr
RAM:0000009E ; End of function sub_94
RAM:0000009E
RAM:000000A0
RAM:000000A0 ; =============== S U B R O U T I N E =======================================
RAM:000000A0
RAM:000000A0
RAM:000000A0 sub_A0
RAM:000000A0
RAM:000000A0 ; FUNCTION CHUNK AT RAM:00000148 SIZE 00000004 BYTES
RAM:000000A0
RAM:000000A0 MOVS R0, #0x70000000 ; 4 42bdf2c 856 df2c : svc #0x2c (offset 0xa0)
RAM:000000A4 LDR R6, =dword_7000EF14
RAM:000000A6 LDR R2, =dword_7000E5B4
RAM:000000A8 LDR R2, [R2]
RAM:000000AA CMP R2, #0
RAM:000000AC BEQ loc_B4
RAM:000000AE LDR R2, [R6]
RAM:000000B0 STR R2, [R0,#8]
RAM:000000B2 B loc_BC
RAM:000000B4 ; ---------------------------------------------------------------------------
RAM:000000B4
RAM:000000B4 loc_B4 ; CODE XREF: sub_A0+C↑j
RAM:000000B4 LDR R2, [R0,#8]
RAM:000000B6 LSRS R0, R0, #0x12
RAM:000000B8 ORRS R2, R0
RAM:000000BA STR R2, [R6]
RAM:000000BC
RAM:000000BC loc_BC ; CODE XREF: sub_A0+12↑j
RAM:000000BC LDR R6, =dword_7000E9C0
RAM:000000BE LDR R0, [R6]
RAM:000000C0 MOVS R2, #0x4000
RAM:000000C4 ORRS R2, R0
RAM:000000C6 STR R2, [R6]
RAM:000000C8 LDR R0, [R5,#0x10]
RAM:000000CA B pop_r2_mov_pc_lr
RAM:000000CA ; End of function sub_A0
RAM:000000CA
RAM:000000CC
RAM:000000CC ; =============== S U B R O U T I N E =======================================
RAM:000000CC
RAM:000000CC
RAM:000000CC sub_CC
RAM:000000CC MOVS R2, #0xF000000 ; 5 37aadf42 6f54 df42 : svc #0x42 (offset 0xcc)
RAM:000000D0 BICS R1, R2
RAM:000000D2 STR R1, [R4,#0x10]
RAM:000000D4 LDR R1, [R4,#0x50]
RAM:000000D6 MOVS R2, #7
RAM:000000D8 BICS R1, R2
RAM:000000DA STR R1, [R4,#0x50]
RAM:000000DC B pop_r2_mov_pc_lr
RAM:000000DC ; End of function sub_CC
RAM:000000DC
RAM:000000DE
RAM:000000DE ; =============== S U B R O U T I N E =======================================
RAM:000000DE
RAM:000000DE
RAM:000000DE sub_DE
RAM:000000DE LDR R2, =dword_7000FA9C ; 6 972df4b 12e4 df4b : svc #0x4b (offset 0xde)
RAM:000000E0 LDR R2, [R2]
RAM:000000E2 LSRS R2, R2, #8
RAM:000000E4 LSLS R2, R2, #1
RAM:000000E6 LDR R1, [R4]
RAM:000000E8 BICS R1, R2
RAM:000000EA STR R1, [R4]
RAM:000000EC CMP R0, #0
RAM:000000EE B pop_r2_mov_pc_lr
RAM:000000EE ; End of function sub_DE
RAM:000000EE
RAM:000000F0
RAM:000000F0 ; =============== S U B R O U T I N E =======================================
RAM:000000F0
RAM:000000F0
RAM:000000F0 sub_F0
RAM:000000F0
RAM:000000F0 arg_0= 0
RAM:000000F0
RAM:000000F0 LDR R0, =0x400049F0 ; 7 2293df54 4526 df54 : svc #0x54 (offset 0xf0)
RAM:000000F2 LDR R2, [R0]
RAM:000000F4 STR R2, [SP,#arg_0]
RAM:000000F6 LDR R0, =0x40010000
RAM:000000F8 LSRS R2, R2, #17
RAM:000000FA BEQ pop_r2_mov_pc_lr ; if ([0x400049F0] >> 17) == 0) {
RAM:000000FA ; r2 = [0x400049F0];
RAM:000000FA ; } else {
RAM:000000FC LDR R0, =APBDEV_PMC_CNTRL_0
RAM:000000FE STR R4, [R0] ; write APBDEV_PMC_CNTRL
RAM:00000100
RAM:00000100 loc_100 ; CODE XREF: sub_F0:loc_100↓j
RAM:00000100 B loc_100 ; hang
RAM:00000100 ; End of function sub_F0 ; }
RAM:00000100
RAM:00000102
RAM:00000102 ; =============== S U B R O U T I N E =======================================
RAM:00000102
RAM:00000102
RAM:00000102 sub_102
RAM:00000102
RAM:00000102 arg_0= 0
RAM:00000102
RAM:00000102 LDR R2, =0x40010220 ; 8 21fadf5d 43f4 df5d : svc #0x5d (offset 0x102)
RAM:00000104 STR R2, [SP,#arg_0] ; set r2 retval = [0x40010220]
RAM:00000106 LDR R2, [R2,#0x18]
RAM:00000108 ADDS R0, #0xFC
RAM:0000010A STR R2, [R0,#0x1C] ; [r0+0x118] = [0x40010220 + 0x18]
RAM:0000010C B pop_r2_mov_pc_lr
RAM:0000010C ; End of function sub_102
RAM:0000010C
RAM:0000010C ; ---------------------------------------------------------------------------
RAM:0000010E DCB 0
RAM:0000010F DCB 0
RAM:00000110 off_110 DCD 0x60006410 ; DATA XREF: sub_48+4↑r
RAM:00000114 off_114 DCD 0x600060F8 ; DATA XREF: sub_48+A↑r
RAM:00000118 off_118 DCD 0x60006284 ; DATA XREF: sub_48+10↑r
RAM:0000011C off_11C DCD 0x60006554 ; DATA XREF: sub_48+26↑r
RAM:00000120 off_120 DCD 0x60006148 ; DATA XREF: sub_48+2E↑r
RAM:00000124 off_124 DCD 0x600066A0 ; DATA XREF: sub_48+3A↑r
RAM:00000128 off_128 DCD dword_7000EF14 ; DATA XREF: sub_A0+4↑r
RAM:0000012C off_12C DCD dword_7000E5B4 ; DATA XREF: sub_A0+6↑r
RAM:00000130 off_130 DCD dword_7000E9C0 ; DATA XREF: sub_A0:loc_BC↑r
RAM:00000134 off_134 DCD dword_7000FA9C ; DATA XREF: sub_DE↑r
RAM:00000138 off_138 DCD 0x400049F0 ; DATA XREF: sub_F0↑r
RAM:0000013C dword_13C DCD 0x40010000 ; DATA XREF: sub_F0+6↑r
RAM:00000140 off_140 DCD APBDEV_PMC_CNTRL_0 ; DATA XREF: sub_F0+C↑r
RAM:00000144 off_144 DCD 0x40010220 ; DATA XREF: sub_102↑r
RAM:00000148 ; ---------------------------------------------------------------------------
RAM:00000148 ; START OF FUNCTION CHUNK FOR sub_A0
RAM:00000148
RAM:00000148 pop_r2_mov_pc_lr ; CODE XREF: sub_48+42↑j
RAM:00000148 ; sub_8C+6↑j ...
RAM:00000148 POP {R2}
RAM:0000014A MOV PC, LR
RAM:0000014A ; END OF FUNCTION CHUNK FOR sub_A0
</syntaxhighlight>

The last 4 patches are exclusive to the Switch, while the remaining ones are often included in most Tegra210 based devices.

==== IROM patch 0 ====
This patch configures clock enables and clock gate overrides for new hardware.

<syntaxhighlight lang="c">
u32 CLK_ENB_H_SET = 0x60006328;
u32 CLK_ENB_L_SET = 0x60006320;
u32 CLK_ENB_U_SET = 0x60006330;
u32 CLK_ENB_V_SET = 0x60006440;
u32 CLK_ENB_W_SET = 0x60006448;
u32 CLK_ENB_X_SET = 0x60006284;
u32 CLK_ENB_Y_SET = 0x6000629C;
u32 LVL2_CLK_GATE_OVRA = 0x600060F8;
u32 LVL2_CLK_GATE_OVRB = 0x600060FC;
u32 LVL2_CLK_GATE_OVRC = 0x600063A0;
u32 LVL2_CLK_GATE_OVRD = 0x600063A4;
u32 LVL2_CLK_GATE_OVRE = 0x60006554;
u32 CLK_SOURCE_VI = 0x60006148;
u32 CLK_SOURCE_HOST1X = 0x60006180;
u32 CLK_SOURCE_NVENC = 0x600066A0;

// Set all clock enables and overrides
*(u32 *)CLK_ENB_V_SET = 0xFFFFFFFF;
*(u32 *)CLK_ENB_W_SET = 0xFFFFFFFF;
*(u32 *)LVL2_CLK_GATE_OVRA = 0xFFFFFFFF;
*(u32 *)LVL2_CLK_GATE_OVRB = 0xFFFFFFFF;
*(u32 *)CLK_ENB_X_SET = 0xFFFFFFFF;
*(u32 *)CLK_ENB_Y_SET = 0xFFFFFFFF;
*(u32 *)CLK_ENB_L_SET = 0xFFFFFFFF;
*(u32 *)CLK_ENB_H_SET = 0xFFFFFFFF;
*(u32 *)CLK_ENB_U_SET = 0xFFFFFFFF;
*(u32 *)LVL2_CLK_GATE_OVRC = 0xFFFFFFFF;
*(u32 *)LVL2_CLK_GATE_OVRD = 0xFFFFFFFF;
*(u32 *)LVL2_CLK_GATE_OVRE = 0xFFFFFFFF;

// Set VI, HOST1X and NVENC clock sources to CLK_M
*(u32 *)CLK_SOURCE_VI = 0xA0000000;
*(u32 *)CLK_SOURCE_HOST1X = 0xA0000000;
*(u32 *)CLK_SOURCE_NVENC = 0xE0000000;

/*
Untranslated instructions:

MOVS R1, #0
MOVS R0, #0xE
*/

return;
</syntaxhighlight>

==== IROM patch 1 ====
This patch is a bugfix.

LP0 resume code expects APBDEV_PMC_SCRATCH190_0 to be set to 0x01, but the bootrom didn't set it.

<syntaxhighlight lang="c">
u32 APBDEV_PMC_SCRATCH190_0 = 0x7000EC18;
u32 pmc_scratch190_val = *(u32 *)APBDEV_PMC_SCRATCH190_0;

return (pmc_scratch190_val | 0x01);
</syntaxhighlight>

==== IROM patch 2 ====
This patch adjusts USB configurations.

<syntaxhighlight lang="c">
u32 USB1_UTMIP_SPARE_CFG0_0 = 0x7D000834;
u32 USB1_UTMIP_BIAS_CFG2_0 = 0x7D000850;

// Increase UTMIP_HSSQUELCH_LEVEL_NEW by 0x02
*(u32 *)USB1_UTMIP_BIAS_CFG2_0 += 0x02;

// Clear FUSE_HS_IREF_CAP_CFG
*(u32 *)USB1_UTMIP_SPARE_CFG0_0 = ((*(u32 *)USB1_UTMIP_SPARE_CFG0_0 & ~(0x118)) - 0x80);

return;
</syntaxhighlight>

==== IROM patch 3 ====
This patch ensures that waiting on PRC_PENDING from the XUSB_DEV register T_XUSB_DEV_XHCI_PORTSC never fails.

In the second batch of patched units ([[#FUSE_OPT_FT_REV|FUSE_OPT_FT_REV]] set to revision 7.0) this patch has been replaced with a fix for [[Switch_System_Flaws#Hardware|CVE-2018-6242]] (arbitrary copy when handling USB control requests in RCM). By setting R1 to 0 at address 0x0010769A in the bootrom, the upper 16 bits of the USB control request's wLength field are cleared out, effectively limiting the request's size to a maximum of 255 bytes.

==== IROM patch 4 ====
This patch allows backing up and restoring strapping options for warmboot.

<syntaxhighlight lang="c">
u32 APBDEV_PMC_SCRATCH0_0 = 0x7000E450;
u32 APBDEV_PMC_RST_STATUS_0 = 0x7000E5B4;
u32 APBDEV_PMC_SEC_DISABLE8_0 = 0x7000E9C0;
u32 APBDEV_PMC_SECURE_SCRATCH111_0 = 0x7000EF14;
u32 APB_MISC_PP_STRAPPING_OPT_A_0 = 0x70000008;

u32 reset_status = *(u32 *)APBDEV_PMC_RST_STATUS_0;

// Check for regular power on
if (reset_status == 0)
{
// Set all buttons in RCM_STRAPS and backup to PMC scratch
*(u32 *)APBDEV_PMC_SECURE_SCRATCH111_0 = (*(u32 *)APB_MISC_PP_STRAPPING_OPT_A_0 | 0x1C00);
}
else
{
// Restore strapping options from PMC scratch
*(u32 *)APB_MISC_PP_STRAPPING_OPT_A_0 = *(u32 *)APBDEV_PMC_SECURE_SCRATCH111_0;
}

// Disable write access to APBDEV_PMC_SECURE_SCRATCH111_0
*(u32 *)APBDEV_PMC_SEC_DISABLE8_0 |= 0x4000;

return *(u32 *)APBDEV_PMC_SCRATCH0_0;
</syntaxhighlight>

==== IROM patch 5 ====
This patch adjusts USB configurations.

<syntaxhighlight lang="c">
u32 USB1_UTMIP_HSRX_CFG0_0 = 0x7D000810;
u32 USB1_UTMIP_BIAS_CFG2_0 = 0x7D000850;

// Clear UTMIP_IDLE_WAIT, UTMIP_ELASTIC_LIMIT and UTMIP_PCOUNT_UPDN_DIV,
// and set UTMIP_IDLE_WAIT to 0x11 and UTMIP_ELASTIC_LIMIT to 0x10
*(u32 *)USB1_UTMIP_HSRX_CFG0_0 = ((*(u32 *)USB1_UTMIP_HSRX_CFG0_0 & ~(0xF8000) + 0x88000 & ~(0x7C00) + 0x4000) & ~(0xF000000));

// Clear UTMIP_HSSQUELCH_LEVEL_NEW
*(u32 *)USB1_UTMIP_BIAS_CFG2_0 &= ~(0x07);

return;
</syntaxhighlight>

==== IROM patch 6 ====
This patch is a factory backdoor.

It allows controlling the debug authentication configuration using a fuse.

<syntaxhighlight lang="c">
u32 FUSE_ODM_INFO = 0x7000FA9C;

u32 odm_info = *(u32 *)FUSE_ODM_INFO;
debug_auth_override_val = ((odm_info >> 0x08) << 0x01);

// Override debug authentication value stored in IRAM
*(u32 *)0x400028E4 &= ~(debug_auth_override_val);

/*
Untranslated instructions:

CMP R0, #0
*/

return;
</syntaxhighlight>

==== IROM patch 7 ====
This patch is a bugfix.

It prevents overflowing IRAM (0x40010000) when copying the warmboot binary from DRAM.

<syntaxhighlight lang="c">
u32 APBDEV_PMC_CNTRL_0 = 0x7000E400;

u32 warmboot_header_addr = 0x400049F0;
u32 warmboot_bin_size = *(u32 *)warmboot_bin_header_addr;

// Invalid warmboot binary size
if (warmboot_size >> 0x11)
{
// Assert MAIN_RST
// 0x40004BF0 comes from R4 and the bootrom doesn't bother to change it
*(u32 *)APBDEV_PMC_CNTRL_0 = 0x40004BF0;

// Deadlock
while(1);
}

/*
Untranslated instructions:

LDR R0, =0x40010000
LDR R2, [warmboot_bin_header_addr]
*/

return;
</syntaxhighlight>

==== IROM patch 8 ====
This patch is a bugfix.

It sets the correct warmboot binary entrypoint address for RSA signature verification, which would be done in DRAM instead of IRAM without this patch.

<syntaxhighlight lang="c">
u32 warmboot_addr_ptr = 0x40010238;
u32 warmboot_entry_addr_ptr = 0x40004C28;

*(u32 *)warmboot_entry_addr_ptr = *(u32 *)warmboot_addr_ptr;

/*
Untranslated instructions:

LDR R2, [warmboot_addr_ptr]
*/

return;
</syntaxhighlight>

==== IROM patches 9 and 10 ====
These patches modify the 256-bit Secure Provisioning AES key with index 0x3A.

==== IROM patch 11 ====
This patch forces the value of [[Security_Engine|SE_TZRAM_SECURITY]] to be 0x01 instead of restoring it from the saved SE context.

== Anti-downgrade ==
The first bootloader verifies [[#FUSE_RESERVED_ODM7|FUSE_RESERVED_ODM7]] to prevent downgrading.
How many fuses are expected to be burnt depends the device's unit type as below.

{| class="wikitable" border="1"
|-
! System version
! Expected number of burnt fuses (retail)
! Expected number of burnt fuses (non-retail)
|-
| 1.0.0
| 1
| 0
|-
| 2.0.0-2.3.0
| 2
| 0
|-
| 3.0.0
| 3
| 1
|-
| 3.0.1-3.0.2
| 4
| 1
|-
| 4.0.0-4.1.0
| 5
| 1
|-
| 5.0.0-5.1.0
| 6
| 1
|-
| 6.0.0-6.1.0
| 7
| 1
|-
| 6.2.0
| 8
| 1
|-
| 7.0.0-8.0.1
| 9
| 1
|-
| 8.1.0
| 10
| 1
|-
| 9.0.0-9.0.1
| 11
| 1
|-
| 9.1.0
| 12
| 1
|-
| 10.0.0
| 13
| 1
|}

If too many fuses are burnt the bootloader will panic immediately.

If too few are burnt, the bootloader will enable fuse programming and write the expected value to fuses [[#reserved_odm6|reserved_odm6]] and [[#reserved_odm7|reserved_odm7]]. Afterwards, fuse programming is disabled and the panic value 0x21 is written to PMC_SCRATCH200 register (0x7000EC40). Finally, the watchdog timer is initialized and programmed to force a reset.

On a subsequent boot, after the anti-downgrade fuses are checked again, the PMC_RST_STATUS register (0x7000E5B4) is checked and if set to 0x01 (watchdog reset) the PMC_SCRATCH200 register (0x7000EC40) will be checked for the panic value 0x21.
PMC_RST_STATUS will only be set back to 0 (power on reset) if the fuse count matches the new expected value, otherwise the system will panic.

Flash Filesystem

2019-04-11T04:52:06Z

Gren: /* System Savegames */

= NAND structure =
The Switch's eMMC storage features a large user area, two smaller boot partitions and a replay-protected memory block which is unused (no authentication key is programmed).

All official partition names come from [[SystemInitializer]].

== Boot Partitions ==

'''Boot Partition 0 (0 of 1)'''

The official name for this partition is "BootPartition1Root" and it has [[Filesystem_services|Bis]] Partition ID == 0.

{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x000000
| 0x4000
| Normal Firmware [[BCT|BCT]] from [[Title_list#System_Data_Archives|Title 0100000000000819]]
|-
| 0x004000
| 0x4000
| SafeMode Firmware [[BCT|BCT]] from [[Title_list#System_Data_Archives|Title 010000000000081A]]
|-
| 0x008000
| 0x4000
| Normal Firmware [[BCT|BCT]] from [[Title_list#System_Data_Archives|Title 0100000000000819]] (backup)
|-
| 0x00C000
| 0x4000
| SafeMode Firmware [[BCT|BCT]] from [[Title_list#System_Data_Archives|Title 010000000000081A]] (backup)
|-
| 0x010000
| 0xEC000
| 59 additional BCTs, normally unused/empty on retail systems.
|-
| 0x0FC000
| 0x4000
| [[#System Update Control|System Update Control area]]
|-
| 0x100000
| 0x40000
| Normal Firmware [[Package1|package1]] from [[Title_list#System_Data_Archives|Title 0100000000000819]]
|-
| 0x140000
| 0x40000
| Normal Firmware [[Package1|package1]] from [[Title_list#System_Data_Archives|Title 0100000000000819]] (backup)
|-
| 0x180000
| 0x4000
| [[#Keyblob|Keyblob area]]
|-
| 0x184000
| 0x200
| [2.0.0+] [[#NAND Patrol|NAND Patrol area]]
|}

'''Boot Partition 1 (1 of 1)'''

The official name for this partition is "BootPartition2Root" and it has [[Filesystem_services|Bis]] Partition ID == 10.

{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x000000
| 0x40000
| SafeMode Firmware [[Package1|package1]] from [[Title_list#System_Data_Archives|Title 010000000000081A]]
|-
| 0x040000
| 0x40000
| SafeMode Firmware [[Package1|package1]] from [[Title_list#System_Data_Archives|Title 010000000000081A]] (backup)
|-
| 0x080000
| 0x40000
| Reserved
|-
| 0x0C0000
| 0x40000
| Reserved
|}

=== System Update Control ===
The 0x4000 bytes at offset 0xFC000 are used by [[NS_Services|NS]] and [[Boot|boot]] for keeping track of the status of a system update. This area is used by the [[NS_Services#ns:su|ISystemUpdateControl]] commands "ApplyDownloadedUpdate", "ApplyCardUpdate" and "ApplyReceivedUpdate".

{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0
| 0x1
| BootImages status. Set to 1 by [[NS_Services|NS]] during a system update and cleared by [[Boot|boot]] after restarting.
|-
| 0x1
| 0x1
| BootImagesSafe status. Set to 1 by [[NS_Services|NS]] during a system update and cleared by [[Boot|boot]] after restarting.
|}

=== Keyblob ===
Starting at offset 0x180000 is an array of 0x200-byte entries, for a total of 32 keyblobs. Each one is unique compared to the others and they are all console unique. This is officially known as the "EKS" (encryption key source) area.

From each 0x200-byte entry only the first 0xB0 bytes effectively form the keyblob as below.

{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0
| 0x10
| Keyblob AES-CMAC over the next 0xA0 bytes (safe against timing attacks)
|-
| 0x10
| 0x10
| Keyblob AES CTR
|-
| 0x20
| 0x90
| Keyblob encrypted payload
|-
| 0xB0
| 0x150
| Unused, all-zero.
|}

The active bootloader's version (offset 0x2330 in the BCT) acts as an index to control which keyblob should be installed into the system.
[[NS_Services|NS]] uses this during system updates to install the keyblob into the [[BCT#customer_data|customer data]] section in BCTs (offset 0x450).

[[Boot]] also uses this index for repairing corrupt sectors.

The currently active keyblob is officially known as "SecureInfo".

=== NAND Patrol ===
The 0x200 bytes at offset 0x184000 are used by [[Filesystem_services|FS]] for keeping track of NAND patrolling.

{| class="wikitable" border="1"
|-
! Offset
! Size
! Description
|-
| 0x0
| 0x20
| HMAC-SHA-256 over the next 0x1E0 bytes
|-
| 0x20
| 0x4
| Last patrolled NAND block's offset
|-
| 0x24
| 0x4
| NAND patrol count
|-
| 0x28
| 0x1D8
| Unused, all-zero.
|}

== User Partitions ==
{| class="wikitable" border="1"
|-
! Partition name
! Offset
! Size
! [[Filesystem_services|Bis]] Partition ID
! Encrypted
! Description
|-
| N/A
| 0x0
|
| 20
| No
| GPT header, Bis-storage also allows raw access to the entire NAND eMMC sectors starting at sector0. The official name for this partition is "UserDataRoot".
|-
| [[Calibration|PRODINFO]]
| 0x00004400
| 0x003FBC00
| 27
| Yes (Bis key 0)
| "CAL0" raw partition containing set:cal data. The official name for this partition is "CalibrationBinary".
|-
| [[Calibration|PRODINFOF]]
| 0x00400000
| 0x00400000
| 28
| Yes (Bis key 0)
| FAT12 filesystem, additional calibration. The official name for this partition is "CalibrationFile".
|-
| BCPKG2-1-Normal-Main
| 0x00800000
| 0x00800000
| 21
| No
| Raw partition where the first 0x4000 bytes (usually empty) contain the [[BootConfig]] and the remaining space contains the [[Package2|package2]] image from [[Title_list#System_Data_Archives|Title 0100000000000819]] by default. With the exFAT update installed, the [[Package2|package2]] image is switched to the one from [[Title_list#System_Data_Archives|Title 010000000000081B]]. The official name for this partition is "BootConfigAndPackage2Part1".
|-
| BCPKG2-2-Normal-Sub
| 0x01000000
| 0x00800000
| 22
| No
| Backup partition for BCPKG2-1-Normal-Main. The official name for this partition is "BootConfigAndPackage2Part2".
|-
| BCPKG2-3-SafeMode-Main
| 0x01800000
| 0x00800000
| 23
| No
| Raw partition where the first 0x4000 bytes (usually empty) contain the [[BootConfig]] and the remaining space contains the [[Package2|package2]] image from [[Title_list#System_Data_Archives|Title 010000000000081A]] by default. On [4.0.0+] and with the exFAT update installed, the [[Package2|package2]] image is switched to the one from [[Title_list#System_Data_Archives|Title 010000000000081C]]. The official name for this partition is "BootConfigAndPackage2Part3".
|-
| BCPKG2-4-SafeMode-Sub
| 0x02000000
| 0x00800000
| 24
| No
| Backup partition for BCPKG2-3-SafeMode-Main. The official name for this partition is "BootConfigAndPackage2Part4".
|-
| BCPKG2-5-Repair-Main
| 0x02800000
| 0x00800000
| 25
| No
| Installed at the factory, never written afterwards on retail. In one case this is identical to normal [[1.0.0]] [[Package2|package2]], except this has encrypted data at the end padded for 0x1000-byte alignment. The official name for this partition is "BootConfigAndPackage2Part5".
|-
| BCPKG2-6-Repair-Sub
| 0x03000000
| 0x00800000
| 26
| No
| Backup partition for BCPKG2-5-Repair-Main. The official name for this partition is "BootConfigAndPackage2Part6".
|-
| SAFE
| 0x03800000
| 0x04000000
| 29
| Yes (Bis key 1)
| FAT32 filesystem. The official name for this partition is "SafeMode".
|-
| SYSTEM
| 0x07800000
| 0xA0000000
| 31, 32 and 33
| Yes (Bis key 2)
| FAT32 filesystem. The official names for these partitions are "System", "SystemProperEncryption" and "SystemProperPartition".
|-
| USER
| 0xA7800000
| 0x680000000
| 30
| Yes (Bis key 3)
| FAT32 filesystem.
|-
|
| 0x747BFFE00
| 0x200
|
| No
| This is the backup GPT header specified by the main GPT header. This is also the last sector readable with Bis-storage paritionID 20.
|}

If the client process lacks the relevant permission for any of the above partition IDs, error 0x2EE202 is returned.

[[NCA]]s stored in NAND are raw, identical to the data readable with [[NCM_services#ReadContentIdFile]].

The filenames for saveimages is just "<lower-case hex u64 saveID>". SYSTEM-partition saveIDs are specified by [[Filesystem_services|FS]] commands, while USER-partition saveIDs are determined by FS-module internally. The high u32 of the saveID is normally either 0x00000000 or 0x80000000.

Encrypted partitions use AES-XTS using the same non-standard tweak (tweak[0] = sectorIdx[MSB] .. tweak[15] = sectorIdx[LSB], if using 32bit sectorIdx that means tweak[0]..tweak[11] are 0, with tweak[12]..tweak[15] containing big-endian sectorIdx) as other Nintendo AES-XTS code, initial_sector = 0, and sector size 0x4000. All encrypted partitions use console unique keydata.

=== PRODINFOF ===
PRODINFOF
├── Certifications
│ └── WirelessCertification.png
└── ptd
├── DeviceIdWithEmsBit.dat
├── Ecid.dat
├── prodCode.dat
└── log
├── Process_asm1.log
├── Process_board1.log
├── TestFlagLine.log
├── TestFlagQc.log
├── AGING
│ └── Sequence.log
├── BOARD_TEST
│ └── Sequence.log
├── BOARD_WIRELESS
│ └── Sequence.log
├── FINAL_CHECK
│ └── Sequence.log
├── LCD_AND_KEY
│ └── Sequence.log
└── USB_AND_HP
└── Sequence.log

==== DeviceIdWithEmsBit.dat ====
Contains a 0x10-byte uppercase hex string, identical to the DeviceId in the [[Settings_services|DeviceCert]].

=== SYSTEM ===
SYSTEM
├── PRF2SAFE.RCV
├── Contents
│ ├── registered
│ │ └── ... [[NCA]]
│ └── placehld
│ └── ... [[NCA]]
├── [[Savegames|save]]
│ └── ...
└── saveMeta
└── ... (empty?)

The saves stored under this partition are only for system-titles / etc.

=== USER ===
USER
├── PRF2SAFE.RCV
├── Album (Same layout as [[SD_Filesystem|SD]])
├── Contents
│ ├── registered
│ │ └── ... [[NCA]]
│ └── placehld
│ └── ... [[NCA]]
├── [[Savegames|save]]
│ └── ...
├── saveMeta
│ └── ...
└── temp

The saves for all non-system applications, regardless of where the application is located(storageID), is stored here. Each user account which has savedata has a separate saveimage. Save-common for an application is presumably a separate saveimage too. Every saveimage here is ''only'' for applications.

=== SAFE ===
SAFE
├── PRF2SAFE.RCV
├── Contents
│ ├── registered
│ │ └── ... [[NCA]] (nothing installed?)
│ └── placehld
│ └── ... [[NCA]]
└── [[Savegames|save]]
├── 8000000000000000
└── 8000000000000120

On a v2.1 system with MountBis, the only thing under here is "PRF2SAFE.RCV".

= System Savegames =

This is a listing of known System Savedata and what titles they correspond to.

{| class="wikitable" border="1"
! SaveID || Owner || Mount || Notes
|-
| 0x8000000000000000 || fs || <nowiki>saveDataIxrDb:/</nowiki>, <nowiki>saveDataIxrDbSf:/</nowiki>, <nowiki>saveDataIxrDbPr:/</nowiki>, <nowiki>saveDataIxrDbSd:/</nowiki> || Contains [[IMKV|imkvdb.arc]] and "lastPublishedId".
|-
| 0x8000000000000010 || account || <nowiki>account:/</nowiki> || Account database.
|-
| 0x8000000000000011 || account || <nowiki>idgen:/</nowiki> ||
|-
| 0x8000000000000020 || nfc || <nowiki>data:/</nowiki> || NFC data and backups.
|-
| 0x8000000000000030 || ns || <nowiki>mii:/</nowiki> || Mii database.
|-
| 0x8000000000000031 || ns || <nowiki>mii:/</nowiki> || Mii test mode database.
|-
| 0x8000000000000040 || ns || <nowiki>apprecdb:/</nowiki> ||
|-
| 0x8000000000000041 || ns || <nowiki>nsaccache:/</nowiki> || Home menu icondata/lru list for recently played games.
|-
| 0x8000000000000043 || ns || <nowiki>ns_appman:/</nowiki> ||
|-
| 0x8000000000000044 || ns || <nowiki>ns_sysup:/</nowiki> || Content update context.
|-
| 0x8000000000000045 || ns || <nowiki>vmdb:/</nowiki> || Required Version List storage. Also contained Version List storage before 7.0.0.
|-
| 0x8000000000000046 || ns || <nowiki>dtlman:/</nowiki> ||
|-
| 0x8000000000000047 || ns || <nowiki>ns_exfat:/</nowiki> ||
|-
| 0x8000000000000048 || ns || <nowiki>ns_systemseed:/</nowiki> ||
|-
| 0x8000000000000049 || ns || <nowiki>ns_ssversion:/</nowiki> || Safe System version.
|-
| 0x8000000000000050 || settings || <nowiki>SystemSettings:/</nowiki> ||
|-
| 0x8000000000000051 || settings || <nowiki>FwdbgSettingsS:/</nowiki> ||
|-
| 0x8000000000000052 || settings || <nowiki>PrivateSettings:/</nowiki> ||
|-
| 0x8000000000000053 || settings || <nowiki>DeviceSettings:/</nowiki> ||
|-
| 0x8000000000000054 || settings || <nowiki>ApplnSettings:/</nowiki> ||
|-
| 0x8000000000000060 || ssl || <nowiki>SslSave:/</nowiki> ||
|-
| 0x8000000000000070 || nim || <nowiki>nim_sys:/</nowiki> ||
|-
| 0x8000000000000071 || nim || <nowiki>nim_net:/</nowiki> ||
|-
| 0x8000000000000072 || nim || <nowiki>nim_tmp:/</nowiki> ||
|-
| 0x8000000000000073 || nim || <nowiki>nim_dac:/</nowiki> ||
|-
| 0x8000000000000074 || nim || <nowiki>nim_delta:/</nowiki> ||
|-
| 0x8000000000000075 || nim || <nowiki>nim_vac:/</nowiki> ||
|-
| 0x8000000000000076 || nim || <nowiki>nim_local:/</nowiki> ||
|-
| 0x8000000000000077 || nim || <nowiki>nim_lsys:/</nowiki> ||
|-
| 0x8000000000000078 || nim || <nowiki>nim_eca_dbg:/</nowiki> ||
|-
| 0x8000000000000080 || friends || <nowiki>friends:/</nowiki> || Per-user savedata.
|-
| 0x8000000000000081 || friends || <nowiki>friends-sys:/</nowiki> ||
|-
| 0x8000000000000082 || friends || <nowiki>friends-image:/</nowiki> ||
|-
| 0x8000000000000090 || bcat || <nowiki>news:/</nowiki> || Actual news msgpack archives.
|-
| 0x8000000000000091 || bcat || <nowiki>news-sys:/</nowiki> || News metadata, tasklist, history, database, required system version, etc.
|-
| 0x8000000000000092 || bcat || <nowiki>news-dl:/</nowiki> || Storage for newly(?) downloaded news list/data.
|-
| 0x80000000000000A0 || bcat || <nowiki>prepo-sys:/</nowiki> || Play Report system information.
|-
| 0x80000000000000A1 || bcat || <nowiki>prepo:/</nowiki> || Play Report msgpack archives.
|-
| 0x80000000000000A2 || bcat || <nowiki>prepo-ap:/</nowiki> ||
|-
| 0x80000000000000B0 || bsdsockets || <nowiki>nsdsave:/</nowiki> || Socket configuration saved data.
|-
| 0x80000000000000C1 || bcat || <nowiki>bcat-sys:/</nowiki> ||
|-
| 0x80000000000000C2 || bcat || <nowiki>bcat-dl:/</nowiki> ||
|-
| 0x80000000000000D1 || erpt || <nowiki>save:/</nowiki> || Contains "/journal" report listing + actual crash reports ("/%08x-%04x-%04x-%02x%02x-%04x%08x"), which are serialized via [http://msgpack.org/ MsgPack].
|-
| 0x80000000000000E0 || es || <nowiki>escertificate:/</nowiki> ||
|-
| 0x80000000000000E1 || es || <nowiki>escommon:/</nowiki> ||
|-
| 0x80000000000000E2 || es || <nowiki>espersonalized:/</nowiki> ||
|-
| 0x80000000000000E3 || es || <nowiki>esmetarecord:/</nowiki> ||
|-
| 0x80000000000000E4 || es || <nowiki>eselicense:/</nowiki> ||
|-
| 0x80000000000000F0 || ns || <nowiki>pdm:/</nowiki> || Play Data log. Per-user savedata.
|-
| 0x8000000000000100 || pctl || <nowiki>pctlss:/</nowiki> || Parental Control settings.
|-
| 0x8000000000000110 || npns || <nowiki>npns_save:/</nowiki> || Push notifications persistent storage.
|-
| 0x8000000000000120 || ncm || ? || meta/[[IMKV|imkvdb.arc]] for system partition. Cache of data extracted from the [[NCA|.cnmt]] for installed titles?(Including 816)
|-
| 0x8000000000000121 || ncm || ? || meta/[[IMKV|imkvdb.arc]] for sd partition. In some cases this save only contains a "meta/" directory without any file.
|-
| 0x8000000000000122 || || ||
|-
| 0x8000000000000130 || migration || <nowiki>state:/</nowiki> ||
|-
| 0x8000000000000131 || migration || <nowiki>context:/</nowiki> ||
|-
| 0x8000000000000140 || capsrv || <nowiki>TM:/</nowiki> ||
|-
| 0x8000000000000150 || olsc || ? ||
|-
| 0x8000000000000180 || sdb || ? || Version list was moved here in 7.0.0 or 7.0.1
|-
| 0x8000000000001010 || qlaunch || || Contains "savedata.dat".
|-
| 0x8000000000001020 || swkbd || || Per-user savedata.
|-
| 0x8000000000001040 || miiEdit || ||
|-
| 0x8000000000001050 || miiEdit || || Contains "database.dat". Possibly Mii data and Mii texture data?
|-
| 0x8000000000001060 || shop || ||
|-
| 0x8000000000001061 || shop || || Per-user savedata.
|-
| 0x8000000000001070 || web || ||
|-
| 0x8000000000001071 || web || || Per-user savedata.
|-
| 0x8000000000001091 || loginShare || || Per-user savedata.
|-
| 0x80000000000010B0 || playerSelect || || Contains "savedata.dat". Per-user savedata.
|-
| 0x80000000000010C0 || myPage || || Per-user savedata.
|}