Difference between revisions of "EMMC pinout"
From Nintendo Switch Brew
(Initial creation, someone who knows more than I can verify?) |
Smartperson (talk | contribs) (Added information for the eMMC's connector pinout, including image.) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | === Front === | ||
| + | [[File:HAC-EMMC-Side-B.png|600px]] | ||
| + | |||
| + | === Back === | ||
[[File:HAC-EMMC-Side-A.png|600px]] | [[File:HAC-EMMC-Side-A.png|600px]] | ||
| − | |||
| − | Supply power via the VCC 3.3V and 1.8V pins, and solder the CLK, CMD, and DAT0 pins to an SD Card reader in order to | + | Supply power via the VCC 3.3V and 1.8V pins, and solder the CLK, CMD, and DAT0 pins to an SD Card reader in order to extract the data off the eMMC chip. |
| + | |||
| + | === eMMC Connector === | ||
| + | [[File:HAC-EMMC-Connector-Plug.jpg|600px]] | ||
| + | |||
| + | The eMMC connector plug on the board mates with the receptacle on the Switch motherboard. The receptacle is a [http://www.molex.com/molex/products/datasheet.jsp?part=active/5009130302_PCB_RECEPTACLES.xml&channel=Products&Lang=en-US Molex 5009130302], and is available from retailers such as [https://www.digikey.com/product-detail/en/molex-llc/5009130302/WM6833CT-ND/3045233 Digi-Key]. | ||
Latest revision as of 21:36, 19 March 2017
Front
Back
Supply power via the VCC 3.3V and 1.8V pins, and solder the CLK, CMD, and DAT0 pins to an SD Card reader in order to extract the data off the eMMC chip.
eMMC Connector
The eMMC connector plug on the board mates with the receptacle on the Switch motherboard. The receptacle is a Molex 5009130302, and is available from retailers such as Digi-Key.
